Update problem resulted in settings changes
After accepting a software update for the Desktop Manager something malfunctioned and the phone locked up during a sync. I was able to get it working, however all the settings have changed (ringtones, call waiting settings, etc.). I want to go back to the defaults and then make adjustments from there. How do I start over?
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99527)
Similar Messages
-
I was prompted to downloaded a security update & so I did. when i tried to open firefox afterwards ,I couldn’t open it. My computer told me I had a DEP settings problem.I tried to change my computer's DEP settings but was notified i couldn't for firefox. I tried the uninstall & then install Firefox again route (could not even do it in safe mode since i can't even open firefox)but still had the same problem afterwards. What should I do?
Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 10.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data because all profile folders will be removed.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
iPad IOS 7.0.2 and Mountain Lion 10.8.5 Calendar colors do not match between computer and device. Problem did not exist until updated IOS arrived. Colours change of their own free will despite being corrected on both iPAD and MacBook Pro. Any answers?
Please do not post the entire messages log as it takes up unnecessarily a lot of space. It seems that there is a corrupt/nonfunctional file called
[email protected]nt.plist
Go to your hard drive, enter library, go into users, and go into launch agents and delete the thing above. Empty the trash and restart. -
When i connect my ipad2 to iTune, it show "iTunes could not check for an update to the carrier settings for your iPad. An unknown error occured (1651)". What should i do to solve this problem? My iTune version is 10.1.4.10 and my ipad is 4.3.5.
If you have iOS 7.1 then you must be a developer, so you should be posting in the developer forums : https://devforums.apple.com/index.jspa
-
HT1222 I am not able to update my iPad to new version,needs any settings changes?
I am not able to update my iPad to new version,needs any settings changes?
How are you trying to update? Have you tried connecting your iPad to your computer running iTunes and update that ways? Please tell us what you have tried, what happened, and what if any, error messages you received.
-
I updated to imovie 11 on my iPhone 4 and my old videos were the only ones there. Everybody else that had this problem went to settings > privacy > photos then turned on access to photos from imovie. When I went to the settings and went to photos there was no imovie option.
Please help ASAP
Thank youI have exactly the same problem and cannot see the imovie privacy option in photos either
-
Unable to log into itunes store (0x80092013) and update problems
I am having problems logging into the itunes store using itunes 10.6.0.40 in Wndows 7 in the uk which results in the error message shown below:
'We could not complete your itunes store request. An unknown error occurred (0x80092013). There was an error in the itunes store please try again later"
However, I am able to browse the itunes store without any problems (this does not require logging in).
In addition selecting the menu item Help > Check for updates in itunes results in the message "The itunes server could not be contacted. Please check your internet connection or try again later'
I also have two ipods and an ipad and clicking on the <Check For Update> button on each of them within itunes results in the error message "The ipod update server could not be contacted. Make sure your network settings are correct and your network connectivity is active or try again later".
In trying to fix the above problems I have tried the following:
Re-installed itunes
Ran ipconfig /flushdns
Changed my dns entries to use dynamic dns entries and also tried googles settings (8.8.8.8 and 8.8.4.4)
Put entries in the hosts file for gs.apple.com etc
Reset the winsock using the command netsh winsock reset
Turned Norton smart firewall off completely
Ensured interent settings were set to 'Check for server certificate revocation' was unticked and "SSL 3.0" and "TLS 1.0." were both ticked
General internet connectivity is working fine it is just itunes where the problems are.
I can also log onto the itunes store from the ipad itself without a problem.
I also have a Windows Vista laptop which can connect to the itunes store without a problem and can also run the menu item Help > Check for updates and results in a message saying itunes is the latest version. This also runs Norton Smart Firewall and is having no problems. So I am assuming from this that my setup is not at fault and it is not an isp issue.
I have also noticed that a number of other people are reporting problems logging into the itunes store and also error 0x80092013.
The results of an itunes diagnostic test (Help > Run Diagnostics) are shown below (this shows that the itunes store can be browsed but attempts at prurchasing etc cannot be completed)
Microsoft Windows 7 Ultimate Edition Service Pack 1 (Build 7601)
System manufacturer System Product Name
iTunes 10.6.0.40
QuickTime 7.7.1
FairPlay 1.14.34
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012AF0402B0FA18
Current user is an administrator.
The current local date and time is 2012-03-11 18:01:37.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Advanced Micro Devices, Inc., ATI Radeon HD 4870
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.6.0.40 is currently running.
iTunesHelper 10.6.0.40 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {46932D17-49B1-4170-9CA8-EA1A00438097}
Description: Microsoft Loopback Adapter
IP Address: 169.254.183.23
Subnet Mask: 255.255.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server: 0.0.0.0
Lease Obtained: Thu Jan 01 00:00:00 1970
Lease Expires: Thu Jan 01 00:00:00 1970
DNS Servers:
Adapter Name: {58D508FD-AACB-4B61-B19B-D91F9FD1F400}
Description: Bluetooth Device (Personal Area Network) #2
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 00:00:00 1970
Lease Expires: Thu Jan 01 00:00:00 1970
DNS Servers:
Adapter Name: {4C3DB141-4DA2-4484-A598-E5B7ACD6E684}
Description: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller(NDIS6.20)
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sun Mar 11 17:05:46 2012
Lease Expires: Sun Mar 11 17:05:45 2012
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was unsuccessful.
An unknown error occurred (0x80092013).
Connection attempt to iPhone activation server was unsuccessful.
An unknown error occurred (0x80092013).
Connection attempt to firmware update server was unsuccessful.
An unknown error occurred (0x80092013).
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-03-11 17:58:25.I have spoken directly with Apple over the last couple of hours. They are aware of the problem and are going to ask their engineering department to investigate. It is perhaps not a big priority at the moment as they say they only have 30 confirmed reports of the issue worldwide.
Is it possible that there are other people who are having the same problem and are watching the forums waiting for answers? If so, please report the problem. This is the only way for Apple to understand the scale of the problem (if indeed it is a big problem) and to be able to escalate the issue and allocate suitable resources. The issue we are seeing is:
I mentioned what you said about downgrading - I have also contemplated this but I am expecting I will need to run 10.6 for HD media and syncing with the new iPad. Apple agree downgrading is not an acceptable solution, and there must be a way forward, but if you dont need 10.6 then why not downgrade until the problems are resolved.
My take on the problem is this:
The error code is the same as a Windows error code that suggests the issue is with accessing the certificate revovation lists (CRL). iTunes 10.6 is a signed application that needs to access a CRL to determine whether its certificate is still active. iTunes own diagnostic tool points in the same direction too. The network connectivity test (see image below) shows the network interface and internet connection are fine. It is just the secure link that is failing. It is possible to view the apple store, and download podcasts etc.. but it is not possible to sign into an account or make purchases.
One person has replied to many of these postings suggesting the problem can be fixed by updating DNS settings, which could add weight to this theory. The person who posted this didnt explain why this worked for them, but if DNS settings have not propogated fully for a new CRL this could be causing problems for some users. If so this could just fix itself in the coming days, or it may work if you can connect to the internet from a different connection like a public wifi hotspot.
I will post updates if I get anywhere or hear anything back from Apple. -
Sequence settings changed and digital cinema freezes. what now?
hello there.
i'm a new fcp user and i could really use some help on some issues that came up while working on a film project.
the material was captured with the camera function of a digital still camera, which resulted in rushes of .avi format, 30 fps, 640X480 frame size.
we then converted these into .mov clips using quicktime and compressor so that we can work without the need to render. we encoded them using the Apple ProRes 422 codec.
i opened a NTSC project to work on this and have created a sequence preset having exactly the same settings as my clips (Apple ProRes 422, 30 fps, etc).
i'm cutting the whole project on a macbook pro (see details below) running fcp 6.0.3 and i'm using a second monitor toggling between browser and digital cinema desktop preview.
everything was working fine till yesterday, when suddently some sequences needed rendering (while they were working fine till then) and dcdp freezed (that is i get the first frame and i can hear the sound when i playback a clip or a sequence and then i get the current frame when i stop it).
i've checked the sequence settings and i've found out that all of my sequences are now pal, 720X576, 25 fps. that's the first part of the problem. i tried changing the sequence settings, but of course i cannot change the frame rate; i've tried creating a new sequence with the correct settings and then copy&paste the clips from the prev sequence but then video and audio go out of synch by 2 frames. how did my settings changed all of a sudden? is there a way to keep my edited sequences without the need to manually re-cut the whole thing?
as far as the second part of the problem is concerned (the dcdp not working anymore), i've tried changing my settings (going from full screen to raw, trying single frame against all frames, etc) but still it doesn't work. the rest of the settings are ok (eg. i've found in the forum that the checkbox about playback mirrored on the desktop should be ticked and it was already).
this computer is never conected to the internet and it has never been manually updated (so there is not a way that an OS update is not working well with fcp).
any ideas?
thanx,
nikos.I've experienced the exact same problems you are having and it's driving me nuts.
It's not like my system has changed. I bought the Mac Pro and Final Cut Studio together and all was well when I first installed it. That initial project was an HDV project and DCDP worked great.
Since then I'm working mostly on SD PAL projects and when I go to preview it on the desktop it does the first frame freeze when you hit play and parks on the current frame when you hit stop.
I can resize the main edit window to full size and the sequence plays back fine but when I go to DCDP it just won't play at all. It feels like a bug but this is the first time I have found someone else with the same problem. By the way, I'm only using one monitor so the mirror desktop thing made no difference.
I know the DCDP isn't great quality but it's fine for getting a general overview and I sure do miss it.
Help us.......please...... -
Bios Update Problem P35 Neo2 - MS 7345 V 1.1
Hello
I've update my board bios because a "hard disk not present" problem and since it I was having several problems:
I'm running Windows XP SP2 and it takes a very long time to start (in bar and loading windows screen).
The major problem I have is when power on the computer it is alwayls showing the red font message that says it was a problem overclocking, so everytime I need to go into setup and to save changes whitout changing anything.
I suspect the bios I've installed is not the right one since the start screen says "MSI Neo Patinum" instead Neo2, but I've used Live Update ... so it should be the rigth one.
Can anybody help me please with this?Quote from: Jack t.N. on 30-April-09, 06:32:24
Hi,
first of all, can you please provide full system specs for comparison? Read the >>Posting Guide<< to get an idea of what we need to know.
Hello Again, first of all I want to thank you for answering so fast. Also I have to apologize for my "not so good" english.
# CPU brand, model and speed (eg AMD Athlon64 X2 5600+ 'Brisbane' core)
DualCore Intel Pentium E2160, 1800 MHz (9 x 200)
# Motherboard model (eg K9A2 Platinum, NOT just MS-7376!!)
P35 Neo2 - MS 7345 V 1.1
http://www.msi.com/index.php?func=proddesc&maincat_no=1&cat2_no=&cat3_no=&prod_no=1261
# Memory brand, type/speed, size, number of sticks (eg 2x1GB Crucial DDR2-800)
2x1GB Supertalent DDR2-800 DDR2 SDRAM (5-5-5-15 @ 400 MHz) (4-4-4-10 @ 266 MHz) (3-3-3-8 @ 200 MHz)
# Video card brand, chipset type, memory size (eg Gainward Geforce 8800GT 512MB PCI-E)
XFX NVIDIA GeForce 8600 GT (256 MB)
# Hard drive(s) brand, size, type, speed (eg 2x Seagate 200gb SATA150)
WDC WD3200AAKS-00VYA0 (298 GB, SATAII)
# Any other peripheral cards and devices (eg MSI TV@nywhere Plus TV card, MSI PC54G2 Wireless LAN PCI card)
Multi Flash Reader USB Device
Realtek RTL8185 802.11a/b/g Wireless LAN Network Adapter PCI
# Operating system and version (eg Microsoft Windows Vista Home Premium SP1 32bit)
MICROSOFT Windows XP Pro SP2 32bit
# Power Supply Unit brand and output in watts and DC output (amps)
Vistuba 550W Power Supply
+3.3 V 35A
+5 V 30A
+12 V 20A
Quote from: Jack t.N. on 30-April-09, 06:32:24
Three important questions:
1. Which BIOS Version were you using before the update.
2. Which Version did you update to?
3. Did you clear CMOS with main A/C power cable removed from PSU after the Update?
1. I'm not sure what bios version come with the board (my misstake) but it was older than I've now.
2. I'm actually using AMI 1.10 Build Date: 11/10/2008
3. Yes I did
Quote from: Jack t.N. on 30-April-09, 06:32:24
Did that problem disappear after the update?
The hard disk problem didn't show any more
Quote from: Jack t.N. on 30-April-09, 06:32:24
What kind of hard drive are you using and what port is it connected to?
WDC WD3200AAKS-00VYA0 (298 GB, SATAII)
it is connected to SATA 5 port acording to Board manual diagram
I've checked hard disk SMART and health and it is ok
Quote from: Jack t.N. on 30-April-09, 06:32:24
- If you have an IDE/PATA Hard Drive:
.....What kind of cable are you using? (40 or 80 wire)
.....Is there any other drive connected to the IDE cable (how are the jumper settings for each drive (MASTER/SLAVE/CABLE Select)?
I Haven't IDE/PATA Hard Drive
I will tell you the story:
I bought the computer and I was using the Blue (Marvel) sata port for the hard disk.
Then a normal day I began to have a very low Windows start so I changed the sata plug to a purple one and the problem disappeared.
Then I began to have the same problem again so I changed the plug again but problem was there anyway so decide to update bios to 1.8 version.
The problem come back randomly and sometimes it disappeared just changing the sata port to wich the plug is connected to.
After that I began to have the "No hard disk present" error and I cleared the CMOS and tried several things until it come to work again.
Few time ago I noticed that was a newer bios version, so then I used Live Update to update bios and drivers again.
Now I'm having the "slow" problem again. I'have been trying several configurations and testing programs but I just didn't find anything wrong.
Edit:
I'm having the first post problem (overcloking message after power on)
I also had a very rare issue few time ago when shutdown the pc: few minutes later it power on by It self !! until I have disabled every wake up event from setup.
I hope you can understand, and thanks again for your help.
Gabriel. -
Java doesn't pick up system's DNS settings change until restarted
Hello,
I have a service running on a few Linux computers. Those computers have a NIC, which is configured with a fixed IP address. So /etc/resolv.conf contains the IP address of the LAN's DNS server. But most of the time, the computers are not plugged into the LAN at all. Instead, they connect themselves periodically to the Internet by establishing a ppp connection. When it happens, the ISP's DHCP server assign them new IP parameters, including their DNS server's IP address. And /etc/resolv.conf gets updated with this address.
But it seems that java doesn't take care of DNS change taking place during a run. Which means that my program (started at boot with no connectivity at all) tries to connect to some host, and obviously trigger an "UnknownHostException" (at that point it does try to contact the LAN's DNS server). Quite logical. Later, the ppp link become active. But my program still try to contact the LAN's DNS server, despite the new configuration in /etc/resolv.conf. As such, it will forever trigger UnknowHostExceptions, until it gets restarted (it will then pick up the new settings) or it is plugged back into the LAN (it will finally reach the LAN's DNS server).
This is quite a problem as during one single execution, the machine may encounter several DNS configuration changes, and this problem basically means that it will be impossible for my application to resolve any name at all.
So is there a way to tell Java to re-read the system wide DNS configuration? Or is there some option to prevent Java to "cache" the DNS server to use?
To demonstrate my problem, I've written a simple test case, see below.
To get the problem:
1) Put a bogus DNS server into your /etc/resolv.conf
2) Start the test program. Wait for some time: it will trigger UnknownHostExceptions.
3) Fix the entry in /etc/resolv.conf, and check it actually works (eg ping www.google.be)
4) Test program will continue to trigger UnknownHostExceptions forever.
One interesting fact is that someone tried this test on Windows, and didn't suffer from this behaviour, eg the application reacts to DNS system settings changes dynamically. So it looks like a Linux-only problem.
Thanks in advance for your insight.
Pierre-Yves
package com.test.dnsresolver;
import java.net.InetAddress;
import java.net.UnknownHostException;
public class DnsResolver {
private static String urlString = "www.google.com";
public static void main(String[] args) {
* Specified in java.security to indicate the caching policy for successful
* name lookups from the name service. The value is specified as as integer
* to indicate the number of seconds to cache the successful lookup.
java.security.Security.setProperty("networkaddress.cache.ttl" , "10");
* Specified in java.security to indicate the caching policy for un-successful
* name lookups from the name service. The value is specified as as integer to
* indicate the number of seconds to cache the failure for un-successful lookups.
* A value of 0 indicates "never cache". A value of -1 indicates "cache forever".
java.security.Security.setProperty("networkaddress.cache.negative.ttl", "0");
int loopCounter = 0;
while (true) {
InetAddress resolved;
try {
resolved = InetAddress.getByName(urlString);
System.out.println("Loop " + loopCounter + ": resolved IP address: " + resolved);
} catch (UnknownHostException e) {
System.out.println("Loop " + loopCounter + ": UnknownHostException");
e.printStackTrace();
loopCounter++;
try {
Thread.sleep(1000);
} catch (InterruptedException e) {}
}Well, the nameservice property allowing to specify my DNS server of choice is interesting (I didn't know about those), but not very usable, as the DNS server to use is not known in advance (it may be whatever the ISP tells me to use at the time where the ppp link gets established). So no real solution there.
The fact that it caches /etc/resolv.conf content for 300s is very interesting, but having no possibility to impact on this duration really is a pity. There should be some kind of property to fix this behaviour. So as you say, a custom provider may be the only solution.
So far, the hack I use to get this working is based on code similar to this one (it is presented here in a similar form than my test case above). Obviously, reading the /etc/resolv.conf for each dns resolution is not an option in a real environment, but you get the idea.
package com.test.dnsresolver;
import java.io.BufferedReader;
public class DnsResolver {
private static final String urlString = "www.google.com";
private static final String resolvConf = "/etc/resolv.conf";
public static void main(String[] args) {
int loopCounter = 0;
while (true) {
loopCounter++;
try {
Thread.sleep(1000);
} catch (InterruptedException e) {}
// Parse the current DNS server to be used in the config
String nameserver = null;
try {
BufferedReader input = new BufferedReader(new FileReader(new File(resolvConf)));
String currentLine = null;
while (( currentLine = input.readLine()) != null){
// Take care of potential comments
currentLine = currentLine.substring(0, currentLine.indexOf("#") == -1
? currentLine.length() : currentLine.indexOf("#") );
if (currentLine.contains("nameserver")) {
// It is the line we are looking for
nameserver = currentLine;
break;
} catch (FileNotFoundException e) {
System.out.println("Loop " + loopCounter + ": FileNotFoundException");
} catch (IOException e) {
System.out.println("Loop " + loopCounter + ": IOException");
if (nameserver == null) {
// No "nameserver" line found
System.out.println("Loop " + loopCounter + ": No nameserver found in configration file!");
continue;
// Trim it to just contain the IP address
nameserver = (nameserver.replace("nameserver", "")).trim();
System.out.println("Loop " + loopCounter + ": Going to use DNS server " + nameserver);
// At this point, we know which server to use, now perform the resolution
Hashtable<String, String> env = new Hashtable<String, String>();
env.put("java.naming.factory.initial", "com.sun.jndi.dns.DnsContextFactory");
env.put("java.naming.provider.url", "dns://" + nameserver);
DirContext ictx;
try {
ictx = new InitialDirContext(env);
Attributes attrs1 = ictx.getAttributes(urlString, new String[] {"A"});
System.out.println("Loop " + loopCounter + ": Manual resolution: +" + attrs1.get("a").get() + "+");
} catch (NamingException e) {
System.out.println("Loop " + loopCounter + ": NamingException");
}So maybe I should adapt and package this into a proper provider and specify it for sun.net.spi.nameservice.provider. Any link, info or example about how a proper provider should look like?
Thanks for your advices! -
Printer Settings change when switching between printers
First time in the forum, so please be gentle. I know little about Adobe.
I am working with Windows XP (SP 2) machines (I know - should be at least on Windows 7, but can't change what my company has) and have Adobe Reader 8.1.2. We have run into a "bug" of sorts.
Many of our locations (these are PCs all off-site) print labels (pdfs) with a Zebra brand printer where the labels are 2.25 by 4.00 inches. The Zebra printers are always attached directly to the PCs where they create these labels. Sometimes, they want to send the labels to a Lexmark printer that is attached at a Primary Server elsewhere. When they do that, they make sure to choose "Fit To Printable Area" under Page Scaling when the Print Box comes up so that the 2.25x4.00 label is enlarged to fit on 8.5x11 inch paper. The problem we run into is that right now, the default settings for these Zebra printers is 2x3 inches and Portrait. We need them to be 2.25x4 and Landscape. The user makes those settings changes and saves them and it used to be those settings hold once they save them. We also have to change our Lexmark settings to "Letter - 8.5x11", otherwise it defaults to "Custom-4.88x21". Recently, there's been this bug where if they save the settings for Zebra, print something, it's fine. They switch to Lexmark, print to it with "Fit to Printable Area" it's also fine. When they go back to the Zebra printer, suddenly the saved settings are gone and it's back to default.
This also is happening in the reverse - if the user usually uses the Lexmark, but switches once to the Zebra, then back to the Lexmark, the settings have defaulted again. Someone here said they remember seeing something like this before in regards to Adobe Reader. Does anyone have any ideas?
PS - I am creating a new image which will have the correct default settings for our needs so that hopefully this will not be an issue in the future.Hi BigRedEO,
Thank you for posting on the forums. This seems more like a printer issue as it is not retaining the settings.
Kindly try updating the drivers for the printer and check.
Thanks,
Vikrantt Singh -
i deal with a itunes update problem when i try to update i get coneection has timed out error! i had the same problem when i had vista.. yesterday i formated my pc but i still have the same prommblem. i dont deal with such problems on direct downloads.i have this problem only with tunes. maybe my conection freezes for a sec idk
Sorry I gave this a 'this helped me' but after a long struggle I found some ticked box somewhere from some unauthorised chrome extension blaaa....... the link you gave was great, not only did it confirm all the bad things google is supposed to be up to it provided a better browser. Cheers man.
Anyone who find this; I disabled all extension in chrome. I then searched the word proxy in the settings section. A button came up, "change proxy settings" I clicked on it. Earlier it was greyed out as an extension was interefering.. It brought up a box with my own settings from my computer. Then I clicked LAN settings, then unchecked the 'Use a proxy server' button.
P.S. If you're using chrome, bail, and dowload Komodo Dragon. It's virtually identical, but you're not tracked, and you can use chrome extensions, and you can quickily transfer your chrome preferences into it. -
NooR92 wrote:
Hi, i bought lenovo g580 when i try to go to bios, Boot, i have UEFI Enabled but i don't have legacy support option!! and and boot menu! and EFI unavailable!? i put this picture from my laptopCan anyone help please ? regards.Legacy boot options will only show up if you hightlight the UEFI boot mode and press enter to change the value. At that point you will see choices that include "Legacy Support:. UEFI and EFI will not be enabled at the same time, together so your screen display is as it should be when set to UEFI boot mode control. I would suggest some reading and research into the differences to gain a clear understanding of the options.acbraddie wrote:
i tried doing this but the problem is I cannot change any settings in the bios menu which appear by tapping F2 continuously while booting the laptopHere is what i tried1. I tried entering bios menu by F2 which worked but i cannot change any values2. A fresh install of windows not working as dvd-ram, hdd, usb boot arent showing in the boot list3. Even onekey is working but there's not much help...so my lenovo G580 has become uselessany help will be appreciatedThe correct answer is determined by which motherboard is used in your notebook computer. If you are in your BIOS setup screen, on the main page you will see four entires at the top.Product Name::BIOS Version:EC Version:Lenovo SNThe BIOS Version, EC Version and Lenovo SN will help us determine which BIOS update we should choose between 2 different versions depending on the manfacturer of the motherboard. The Serial number will tell us what we need for discovering the manufacturer information. A “WBxxxxxxxx” or similar serail number indicates the motherboard is Wistron. A “CBxxxxxxxx” or simialr serial nubmer indicates the manufacturer is Compal. Additionally the Wistron motherboard BIOS version will be simialr to 62CNxxWW, Compal BIOS version number will be simialr to 5ECNxxWW. Once you have determined which motherboard is present you can look for and download the proper bios updates from Lenovo support site. As another option you can call Lenovo tech support, provide them the serial number and have them assist you with the process. -
Sun Ultra 24 - BIOS Update problem
I have a Sun Ultra 24 where I attempted to update the BIOS to v1.5 using the Sun Tools CD v1.3. After successful install and validation of the BIOS, I am at a POST screen where I have the option to press F1 to load default values or F2 to run setup.
The problem is that my USB keyboards are not being recognized. I have tried all USB ports and two different USB keyboards. The system gives a beep, recognizing that the keyboards are being plugged in and out, and the Caps lock LED is lit for just a second, but after that it is not recognized.
The internal LED BIOS POST code is showing "85", indicating (from the Sun manual): 1. USB final initialization. 2. Switch screen back to text mode.
I have also attempted to remove and replace the BIOS battery.
Any other thoughts as to how I can recover my BIOS or get the system to recognize a USB keyboard? I do not have any PS2 ports on this system.
Thanks for any assistance.I posted too soon, I was able to find another way to update the BIOS, and this worked. For some reason, my keyboard would not work earlier to enter the BIOS settings, but I was able to use Ctrl+Home to update the BIOS from my USB flash drive.
Here are the instructions from the Sun 820-2480-11 document:
Corrupted BIOS: System Does Not Perform POST
An interrupted or failed BIOS update, might result in a corrupted BIOS, which could
cause the system to fail POST and not boot. To resolve this, perform the following
BIOS recovery procedure:
1. Copy the file /BIOS/BIOSxxx.ROM from the Tools and Drivers DVD to the
root directory of a USB flash drive.
2. On the flash drive, rename the file BIOSxxx.ROM to AMIBOOT.ROM.
3. Insert USB flash drive into an available USB port on the workstation.
4. Power on the workstation, press and hold the Ctrl + Home keys, and watch the
USB flash drives access light.
5. When the flash drives access light starts to blink, release the keys.
6. Follow the onscreen instructions to recover system BIOS.
This procedure will be added to the Sun Ultra 24 Workstation Service Manual. -
Hi,
We try to install sccm 2012 serondary site in server 2012. It always failed.
I used the rereqchek tools to check system enviroment locally. All passed.
The primary site installed in server 2012. Both server had granted the administrator permission.
Anyone can help to check the below Configmgrprereq.log
<01-16-2015 08:47:55> ********************************************
<01-16-2015 08:47:55> ******* Start Prerequisite checking. *******
<01-16-2015 08:47:55> ********************************************
<01-16-2015 08:47:55> Commandline :
"D:\Microsoft Configuration Manager\bin\x64\smsexec.exe"
<01-16-2015 08:47:55> Check Type: Secondary site
Site Server: DPServer.ms.com,
SQL Server: DPServer.ms.com,
SQL Named Instance: ,
Install Folder: d:\Program Files\Microsoft Configuration Manager\,
Setup Source Folder: D:\SCCM2012\Source
<01-16-2015 08:47:55> INFO: Executing prerequisite functions...
<01-16-2015 08:47:55> ===== INFO: Prerequisite Type & Server: SITE_SEC:DPServer.ms.com =====
<01-16-2015 08:47:55> <<<RuleCategory: Access Permissions>>>
<01-16-2015 08:47:55> <<<CategoryDesc: Checking access permissions...>>>
<01-16-2015 08:47:55> INFO: CheckLocalSys is Admin of <DPServer.ms.com>.
<01-16-2015 08:48:08> DPServer.ms.com; Site server computer account administrative rights; Error; Configuration Manager Setup requires that the site server computer has administrative rights on
the SQL Server and management point computers.
<01-16-2015 08:48:08> <<<RuleCategory: System Requirements>>>
<01-16-2015 08:48:08> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
<01-16-2015 08:48:08> INFO: Check Lanman service: <DPServer.ms.com>.
<01-16-2015 08:48:22> DPServer.ms.com; Check Server Service is running; Passed
<01-16-2015 08:48:30> INFO: OS version:0, ServicePack:0.
<01-16-2015 08:48:30> DPServer.ms.com; Unsupported site server operating system version for Setup; Error; Configuration Manager site systems can only be installed on systems running Windows Server
2008 SP2 or later.
<01-16-2015 08:48:34> INFO: Failed to get Active Directory membership information for computer DPServer.ms.com with 0.
<01-16-2015 08:48:34> DPServer.ms.com; Domain membership; Error; Configuration Manager site server components must be installed on computers that are members of a Windows domain.
<01-16-2015 08:48:40> INFO: Free disk space on target \\DPServer.ms.com\d$\. = 510158 MB
<01-16-2015 08:48:40> DPServer.ms.com; Free disk space on site server; Passed
<01-16-2015 08:48:47> DPServer.ms.com; Pending system restart; Passed
<01-16-2015 08:48:50> INFO: The server DPServer.ms.com is not read-only domain controller.
<01-16-2015 08:48:50> DPServer.ms.com; Read-Only Domain Controller; Passed
<01-16-2015 08:48:50> INFO: Check FQDN Length for site server: <DPServer.ms.com>.
<01-16-2015 08:48:50> DPServer.ms.com; Site Server FQDN Length; Passed
<01-16-2015 08:48:50> <<<RuleCategory: Dependent Components>>>
<01-16-2015 08:48:50> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
<01-16-2015 08:48:57> DPServer.ms.com; Microsoft XML Core Services 6.0 (MSXML60); Warning; MSXML 6.0 or later libraries are required for Configuration Manager console and Configuration Manager site
server installations. MSXML 6.0 is available for download at http://go.microsoft.com/fwlink/?LinkId=215744
<01-16-2015 08:49:03> DPServer.ms.com; Microsoft Remote Differential Compression (RDC) library registered; Error; Microsoft Remote Differential Compression (RDC) library must be registered for Configuration
Manager site server installation. Details at http://technet.microsoft.com/library/cc431377.aspx#RDC_for_Site_Servers.
<01-16-2015 08:49:03> INFO: Checking Windows Installer version on DPServer.ms.com.
<01-16-2015 08:49:13> INFO: Path of Windows Installer is <\\DPServer.ms.com\C$\Windows\System32\msi.dll>.
<01-16-2015 08:49:19> ERROR: Failed to determine Windows Installer version from path:<\\DPServer.ms.com\C$\Windows\System32\msi.dll> .
<01-16-2015 08:49:19> DPServer.ms.com; Microsoft Windows Installer; Error; Setup failed to verify the Windows Installer version, or the installed version of Windows Installer does not meet the minimum
requirement. Configuration Manager requires at least Windows Installer version 4.5.
<01-16-2015 08:49:19> INFO: Start Checking InstallSQLExpress on site server: DPServer.ms.com, SQL Server instance CONFIGMGRSEC
<01-16-2015 08:49:28> INFO: SQL Server Instance Names value was not found
<01-16-2015 08:49:28> INFO: IsPortUsedByAnySqlInstance port 1433.
<01-16-2015 08:49:39> INFO: TCP port 1433 is not in use by any other SQL Server instances.
<01-16-2015 08:49:49> INFO: Sql express: OS version:0, ServicePack:0.
<01-16-2015 08:49:49> ERROR: Cannot install sqlexpress 2012, not meet OS requirement: Windows server 2008 sp2, Windows server 2008 R2 sp1 or higher.
<01-16-2015 08:49:49> DPServer.ms.com; SQL Server Express on Secondary Site; Error; A SQL Server instance is already installed on the secondary site server using the instance name CONFIGMGRSEC,
or the specified TCP port is being used by another SQL Server instance, or OS version is not Windows Server 2008 sp2, Windows Server 2008 R2 sp1 or higher. Setup is unable to install SQL Server Express on the secondary site.
<01-16-2015 08:49:55> ERROR: Failed to connect to registry of DPServer.ms.com
<01-16-2015 08:49:55> DPServer.ms.com; Existing Configuration Manager server components on site server; Error; A site server or site system role is already installed on the computer selected for
site server installation. Remove the site or site system role from the computer, or select another computer for site server installation.
<01-16-2015 08:49:55> DPServer.ms.com; Firewall exception for SQL Server (stand-alone primary site); Passed
<01-16-2015 08:49:55> INFO: SQL Server computer <DPServer.ms.com>
<01-16-2015 08:49:55> INFO: SQL Server named instance <>
<01-16-2015 08:49:55> INFO: Install SQL Server Express on secondary site, skip checking.
<01-16-2015 08:49:55> DPServer.ms.com; SQL Server service running account; Passed
<01-16-2015 08:49:55> INFO: Install SQL Server Express on secondary site, skip checking.
<01-16-2015 08:49:55> DPServer.ms.com; Dedicated SQL Server instance; Passed
<01-16-2015 08:49:55> INFO: CheckSQLCollationSecondary
<01-16-2015 08:49:55> INFO: Installing SQL Server Express; skipping
<01-16-2015 08:49:55> DPServer.ms.com; Parent/child database collation; Passed
<01-16-2015 08:49:55> INFO: Checking .NET framework versions 3.5...
<01-16-2015 08:50:05> INFO: .NET is installed
<01-16-2015 08:50:05> DPServer.ms.com; Minimum .NET Framework version for Configuration Manager site server; Passed
<01-16-2015 08:50:05> INFO: Checking .NET version required for installing SQL Server Express for Secondary Site.
<01-16-2015 08:50:05> INFO: Checking .NET framework versions 4.0...
<01-16-2015 08:50:10> INFO: .NET is installed
<01-16-2015 08:50:11> DPServer.ms.com; Minimum .NET Framework version for SQL Server Express edition installation for Configuration Manager Secondary Site; Passed
<01-16-2015 08:50:11> INFO: CheckInstallSourceVersion <D:\SCCM2012\Source>
<01-16-2015 08:52:29> ERROR: Could not read install map from \\DPServer.ms.com\D$\\SCCM2012\Source\SMSSETUP\install.map (result 2)
<01-16-2015 08:52:29> DPServer.ms.com; Setup Source Version; Error; The product version in the source folder specified for secondary site installation does not match the version of the primary site.
<01-16-2015 08:52:29> INFO:CheckInstallSourcePath <DPServer.ms.com>
<01-16-2015 08:52:55> ERROR: Failed to call GetResultByRunningService
<01-16-2015 08:52:55> DPServer.ms.com; Setup Source Folder; Error; The computer account for the secondary site must have Read NTFS and share permissions to the Setup source folder and share. We
recommend that you do not use administrative shares (for example, C$ and D$) because they require the secondary site computer account to be an administrator on the remote computer.
<01-16-2015 08:52:55> INFO: Enter CheckSecSiteSqlOnSameMachine.
<01-16-2015 08:52:55> INFO: Installing SQL Server Express, skipping SQL Server check.
<01-16-2015 08:52:55> DPServer.ms.com; SQL Server on the Secondary Site Computer; Passed
<01-16-2015 08:52:55> INFO:CheckSupportedFQDNFormat <DPServer.ms.com>
<01-16-2015 08:53:04> INFO: NetBIOS <NZWHKVMAS020>
<01-16-2015 08:53:04> DPServer.ms.com; Primary FQDN; Passed
<01-16-2015 08:53:04> INFO:CheckMachineAccountHasADAccess <DPServer.ms.com>
<01-16-2015 08:53:30> ERROR: Failed to call GetResultByRunningService
<01-16-2015 08:53:30> DPServer.ms.com; Verify site server permissions to publish to Active Directory.; Warning; The site server might be unable to publish to Active Directory. The computer account
for the site server must have Full Control permissions to the System Management container in its Active Directory domain. You can ignore this warning if you have manually verified these permissions. For more information about your options to configure required
permissions, see http://go.microsoft.com/fwlink/p/?LinkId=233190.
<01-16-2015 08:53:30> INFO:CheckRemoteWMIConnection <DPServer.ms.com>
<01-16-2015 08:53:44> DPServer.ms.com; Remote Connection to WMI on Secondary Site; Passed
<01-16-2015 08:53:44> INFO: Check required collation of Sql Server.
<01-16-2015 08:53:44> INFO: LangID <409>
<01-16-2015 08:53:44> INFO: NOT primary site or CAS install, skipping check for reqired collation of SQL Server.
<01-16-2015 08:53:44> DPServer.ms.com; Required SQL Server Collation; Passed
<01-16-2015 08:53:44> ===== INFO: Prerequisite Type & Server: SQL:DPServer.ms.com =====
<01-16-2015 08:53:44> <<<RuleCategory: Access Permissions>>>
<01-16-2015 08:53:44> <<<CategoryDesc: Checking access permissions...>>>
<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping check for sysadmin role on SQL Server.
<01-16-2015 08:53:44> DPServer.ms.com; SQL Server sysadmin rights; Passed
<01-16-2015 08:53:44> INFO: Skip testing, no expand primary site specified.
<01-16-2015 08:53:44> DPServer.ms.com; SQL Server sysadmin rights for reference site; Passed
<01-16-2015 08:53:44> INFO: The rule 'Site server computer account administrative rights' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping Windows integrated security check.
<01-16-2015 08:53:44> DPServer.ms.com; SQL Server security mode; Passed
<01-16-2015 08:53:44> <<<RuleCategory: System Requirements>>>
<01-16-2015 08:53:44> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
<01-16-2015 08:53:44> INFO: The rule 'Unsupported site server operating system version for Setup' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:53:44> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:53:44> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:53:44> <<<RuleCategory: Dependent Components>>>
<01-16-2015 08:53:44> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server version check.
<01-16-2015 08:53:44> DPServer.ms.com; SQL Server version; Passed
<01-16-2015 08:53:44> DPServer.ms.com; SQL Server Edition; Passed
<01-16-2015 08:53:44> DPServer.ms.com; SQL Server Tcp Port; Passed
<01-16-2015 08:53:44> INFO: Checking if SQL Server memory is limited.
<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server memory check.
<01-16-2015 08:53:44> DPServer.ms.com; Configuration for SQL Server memory usage; Passed
<01-16-2015 08:53:44> INFO: Checking if SQL Server memory is configured to reserve minimum memory.
<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server memory allocation check.
<01-16-2015 08:53:44> DPServer.ms.com; SQL Server process memory allocation; Passed
<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server case insensitive validation.
<01-16-2015 08:53:44> DPServer.ms.com; Case-insensitive collation on SQL Server; Passed
<01-16-2015 08:53:44> INFO: Check Machine FQDN: <DPServer.ms.com>.
<01-16-2015 08:53:44> INFO: getaddrinfo returned success.
<01-16-2015 08:53:44> DPServer.ms.com; Validate FQDN of SQL Server Computer; Passed
<01-16-2015 08:53:44> INFO: The rule 'Primary FQDN' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:53:44> ===== INFO: Prerequisite Type & Server: MP:DPServer.ms.com =====
<01-16-2015 08:53:44> <<<RuleCategory: Access Permissions>>>
<01-16-2015 08:53:44> <<<CategoryDesc: Checking access permissions...>>>
<01-16-2015 08:53:44> DPServer.ms.com; Administrative share (Site system); Passed
<01-16-2015 08:53:44> INFO:CheckSiteSystemtoSQLConnectivity <DPServer.ms.com>
<01-16-2015 08:53:44> INFO: Installing secondary site, skipping SQL Server connectivity check.
<01-16-2015 08:53:44> DPServer.ms.com; Site System to SQL Server Communication; Passed
<01-16-2015 08:53:44> <<<RuleCategory: System Requirements>>>
<01-16-2015 08:53:44> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
<01-16-2015 08:53:44> INFO: The rule 'Check Server Service is running' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:53:52> INFO: OS version:0, ServicePack:0.
<01-16-2015 08:53:52> DPServer.ms.com; Unsupported management point operating system version for Setup; Warning; Configuration Manager site systems can only be installed on systems running Windows
Server 2008 SP2 or later.
<01-16-2015 08:53:52> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:54:05> INFO: Windows Cluster not found on DPServer.ms.com.
<01-16-2015 08:54:05> DPServer.ms.com; Windows Failover Cluster; Passed
<01-16-2015 08:54:05> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:54:05> <<<RuleCategory: Dependent Components>>>
<01-16-2015 08:54:05> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
<01-16-2015 08:54:05> INFO: The rule 'Microsoft XML Core Services 6.0 (MSXML60)' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:54:10> DPServer.ms.com; IIS service running; Warning; Internet Information Services (IIS) is required for some site system roles. You have selected to install a site system role that
requires IIS. Install IIS on the site system to continue setup.
<01-16-2015 08:54:39> ERROR: Failed to get WEBSVCEXT from Remote Service on DPServer.ms.com.
<01-16-2015 08:54:39> INFO: Failed to get IIS BITS Server Extensions state on DPServer.ms.com.
<01-16-2015 08:54:39> DPServer.ms.com; BITS installed; Warning; Background Intelligent Transfer Service (BITS) is required for the management point and distribution point site system roles. BITS
is not installed, IIS 6 WMI compatibility component for IIS7 is not installed on this computer or the remote IIS host, or Setup was unable to verify remote IIS settings because IIS common components were not installed on the site server computer. Also, check
if IIS/BITS services are running properly. Setup cannot continue until BITS is installed and enabled in the IIS settings.
<01-16-2015 08:55:08> ERROR: Failed to get WEBSVCEXT from Remote Service on DPServer.ms.com.
<01-16-2015 08:55:08> INFO: Failed to get IIS BITS Server Extensions state on DPServer.ms.com.
<01-16-2015 08:55:08> DPServer.ms.com; BITS enabled; Warning; Background Intelligent Transfer Service (BITS) is required for the management point and distribution point site system roles. BITS is
not installed, IIS 6 WMI compatibility component for IIS7 is not installed on this computer or the remote IIS host, or Setup was unable to verify remote IIS settings because IIS common components were not installed on the site server computer. Also, check
if IIS/BITS services are running properly. Setup cannot continue until BITS is installed and enabled in the IIS settings.
<01-16-2015 08:55:08> DPServer.ms.com; IIS HTTPS Configuration for management point; Passed
<01-16-2015 08:55:08> INFO: Stand-alone primary site or secondary site. Skip checking firewall settings for SQL Server
<01-16-2015 08:55:08> DPServer.ms.com; Firewall exception for SQL Server for management point; Passed
<01-16-2015 08:55:08> DPServer.ms.com; Administrative rights on management point; Passed
<01-16-2015 08:55:08> INFO:CheckV4ClientNotInstalled <DPServer.ms.com>
<01-16-2015 08:55:36> ERROR: Failed to call GetResultByRunningService
<01-16-2015 08:55:36> DPServer.ms.com; Client Version on Management Point Computer; Warning; You cannot install the management point on a computer with an earlier version of the Configuration Manager
client installed. Upgrade the client to the current version, remove the client, or select a different computer for the management point installation, and then try again.
<01-16-2015 08:55:36> ===== INFO: Prerequisite Type & Server: DP:DPServer.ms.com =====
<01-16-2015 08:55:36> <<<RuleCategory: Access Permissions>>>
<01-16-2015 08:55:36> <<<CategoryDesc: Checking access permissions...>>>
<01-16-2015 08:55:36> <<<RuleCategory: System Requirements>>>
<01-16-2015 08:55:36> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
<01-16-2015 08:55:49> DPServer.ms.com; Unsupported distribution point operating system version for Setup; Warning; Configuration Manager distribution point can only be installed on systems running
Windows Server 2003 or later.
<01-16-2015 08:55:49> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:55:49> INFO: The rule 'Windows Failover Cluster' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:55:49> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:55:49> <<<RuleCategory: Dependent Components>>>
<01-16-2015 08:55:49> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
<01-16-2015 08:55:57> DPServer.ms.com; Microsoft XML Core Services 6.0 (MSXML60) for distribution point; Warning; MSXML 6.0 or later libraries are required for Configuration Manager console and
Configuration Manager site server installations. MSXML 6.0 is available for download at http://go.microsoft.com/fwlink/?LinkId=215744
<01-16-2015 08:55:57> INFO: The rule 'IIS service running' has been run on server 'DPServer.ms.com', skipped.
<01-16-2015 08:55:57> DPServer.ms.com; IIS HTTPS Configuration for distribution point; Passed
<01-16-2015 08:55:57> DPServer.ms.com; Administrative rights on distribution point; Passed
<01-16-2015 08:55:57> ***************************************************
<01-16-2015 08:55:57> ******* Prerequisite checking is completed. *******
<01-16-2015 08:55:57> ***************************************************
<01-16-2015 08:55:57> INFO: Updating Prerequisite checking result into the registry
<01-16-2015 08:55:57> INFO: Connecting to DPServer.ms.com registry
<01-16-2015 08:56:09> INFO: Setting registry values
<01-16-2015 08:56:16> ERROR: Failed to update prerequisite results into the registry; error = 1.<01-16-2015 08:48:08> DPServer.ms.com; Site server computer account administrative rights; Error; Configuration Manager Setup requires that the site server computer has administrative rights
on the SQL Server and management point computers.
Actually the administrative permission had been granted.
Maybe you are looking for
-
I am using a characteristic relationship (without derivation) on Employee for Cost Center. I have a cube that contains Key figures for each period for each planned cost center (with employee = #). I am wanting to copy these key figures to the employe
-
External hard drive disappeared and doesn't mount
Hi all, we're using a MacMini Server at work. As backup we use an external drive and Time Machine. It has been working nicely so far. However, two days ago the external drive just disappeared. It neither shows up on the desktop nor in finder or - and
-
Captivate 5.5 compatibility with Windows 7 64 bit
My laptop's operating system is being changed from Windows XP to Windows 7. Prior to performing this upgrade, I confirmed with adobe that Captivate 5.5 is compatible with windows 7. My tech is now having issues getting it installed. It shows that
-
I am working on Cross-docking scenario in ECC system and I am stuck at "Generating a Cross-Docking" Decision. This is the 6th step as per Best Practice GZ6. What are config settings that should be maintained to generate a decision? I have maintained
-
CAN SOMEONE SHOW ME HOW TO USE CANNED RESPONSES
I am using Gmail, and I would like top know how to use the canned responses app in the Lab on my Mac to return mail unopened to a sender so they know I did not read it. Boy, that was a mouth full...LOL