Update problems, requiring pin to unlock IPAD but I never set one up.
after updating, my IPAD now requires a pin to unlock. the problem is I don't know what the pin is since I never set one up. How do I fix this? I have tried resetting twice, but that doesn't work.
Hi,
There are three things you can do.
1) Type 0000. That is normally the standard passcode, or try 1234.
2) Do a reset by holding the on/off and home buttons together until the Apple logo appears.
3) Look at this - by restoring it: http://support.apple.com/kb/HT1808?viewlocale=en_US
Hope this helps!
Similar Messages
-
I just updated the software on my iPad2 and now it's asking for my passcode but I never set one. How can I fix this?
I fixed it!!
While not connected to any USB cable I put the iPad in recovery mode.
To do that turn the iPad completely off. Press and hold the home button while turning the iPad on, once you see the apple logo release the home button.
Turn on your OS X mac after it boots up connect the USB from iPod to Mac. iTunes should start. If not launch itunes.
Perform the factory restore process paying attention to all of the screen message windows. Then set up the ipad like it was new. -
help!!! My new phone is asking for a password but I never set one and am locked out - what can I do?!?!
Is it asking for your Apple ID password or the passcode to unlock the phone?
If it's asking for your passode, use the steps in this article: http://support.apple.com/kb/ht1212 -
HT4061 My Ipad is aking for a passcode but i never set one up after upgrading ios
I bought an ipad saturday. Sunday i upgraded to ios 7. Once completed, i turned it back on and was working fine. Late that night, I asked to put a passcode but i never set up for one. It didn't asked to put a new passcode when it was upgrading. No i can't get to the screen until i put the 4 digits code. Please help... thanks
Hi,
There are three things you can do.
1) Type 0000. That is normally the standard passcode, or try 1234.
2) Do a reset by holding the on/off and home buttons together until the Apple logo appears.
3) Look at this - by restoring it: http://support.apple.com/kb/HT1808?viewlocale=en_US
Hope this helps! -
New iPad asking for passcode but I never set one - how do I unlock a code never set?
Just got my new iPad yesterday, have no kids or anyone else around who would mess with it while I'm in another room - go to wash the dishes, come back and it's asking me for a passcode to unlock. I had it running all last night - turned off, turn on, sync with macbook pro, blah blah blah, everything is great until tonight. What's going on? How do I unlock it?
Is your iPad new in the sense of being brand new or is it the latest generation?
If you do not have very much on it you could connect it to iTunes on your computer (if you use one) and on the screen that pops up starting with the Summary tab click on the Restore button further down. Be sure to set it up as a new device? You will lose any saved data but at least it will unlock your device. Alternatively, you could could do it through Settings on your ipad. Either way, you my have to redownload your purchased apps again. -
i just bought an ipad air ... what's the default 4 digit code to unlock the ipad? i had not had a chance to reset it yet
There's no default 4 digit code.
You need to force iPad into Recovery Mode. Follow step 1 to 6 very closely.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times. -
It requires a admin password to do the upgrade, but i never set one up
as the said in the above, how am i supposed to do...?
http://support.apple.com/kb/ht1274
-
I've backuped my phone and then had it replaced as it was broken.
Went to retore my new phone Iphone 5 and it is asking for a encryption password. I didn't set one two days ago.
I have tried my itunes password, the computer password my iphone lock password everything.
I even looked into my keychains. HELPThere is no help, if you don't know the encryption password, then sorry you won't be able to use your backup.
-
Sync says I already have it set up, but I never set it up
I tried to set up a sync account, Firefox says I already have a sync account, but I never set one up, how do I reset the whole thing for my e-mail address or name, I don't have the password because I didn't set it up.
I set up my new HP Descjet 3054A . I had a problem becouse Apple give me CD as a driver. The thing was that CD wasn good for this printer becouse it was old software:) I had to go to Apple store so the specialist had to download me he wright driver. Becouse I didnt wannet to screw this up . When he downloaded driver I fired it up at house and thingworks perfect. The thing is when you download all the software from HP side . Then you have to connect your MAC to printer via USB . Fallow the instructions it should works. Worked for me. Good Luck!
-
I just updated my ios to the most recent and now I am asked for a password to access my phone but I never set one. How can I set one now?
Hi there brucedalton,
You may find the information in the article below helpful.
iOS: Forgotten passcode or device disabled after entering wrong passcode
https://support.apple.com/kb/ht1212
-Griff W. -
I can't access to my ipad In MacBook Air. Error shows this device no loger connected or error shows that no response from divice and iTunes can't connected or not found divice, what's the problem? I reset my ipad but no response
Hi ..
Which OS X is installed on your Mac ?
Click the Apple () menu top left in your screen. From the drop down menu click About This Mac. The version is noted there.
Make sure your Mac OS X software is up to date.
Disconnect the iPad from your Mac.
Open System Preferences > Software Update > Check Now
If any updates are required, make sure to restart your Mac after the updates are installed then connect your iPad and see if iTunes recognizes it under Devices. -
MY iPad has a iCloud backup message which I need to ok to clear to unlock iPad but it won't respond when I press ok, how do I clear message?
Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off" -
I updated the operating system in my iPad, but now I can't open apps.....they just wiggle when I try!
Don't hold your finger down for an excess amount of time. Just quickly tap and release on the app icon.
-
Problem: new entered data is saved but I am facing one error message --- no
This is a module program for gate entry of materials(miro). This is a simple entry form which updates z tables with data entered. I have to send the new record details automatically through mail to the particular vendor email id from where the material has been purchased.
Problem: new entered data is saved but I am facing one error message --- no authorization to unpack list with rfc when the program is sending list through mail.
PROGRAM ZMMI001_GRN_ENTRY_BARCODE MESSAGE-ID ZMM .
*Table Declaration
TABLES : EKKO , EKPO , LFA1 , MARC ,
MARD , J_1IMTCHID , EKET , MSEG,
MKPF , ZMMT001_GRN_GATE,
ZMMT002_GRN_ITEM.
TABLES: ADR6.
*Table Control Declaration
CONTROLS : TC1 TYPE TABLEVIEW USING SCREEN 1000.
DATA: COLS LIKE LINE OF TC1-COLS.
*Internal Table Declaration
DATA : BEGIN OF IT_TC1 OCCURS 0,
SEL,
SNO(2) TYPE C,
ITEMCODE(18) TYPE C,
ITEMNAME(40) TYPE C,
QUANTITY TYPE P DECIMALS 2,
EXCISE(13) TYPE P DECIMALS 2,
END OF IT_TC1.
DATA : IT_TEMP_TC1 LIKE IT_TC1 OCCURS 0 WITH HEADER LINE.
DATA: BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA : IT_EKPO LIKE EKPO OCCURS 0 WITH HEADER LINE.
DATA : IT_EKKO LIKE EKKO OCCURS 0 WITH HEADER LINE.
DATA : IT_EKET LIKE EKET OCCURS 0 WITH HEADER LINE.
DATA : WK_ZMMT01 LIKE ZMMT001_GRN_GATE.
DATA : IT_ZMMT01 LIKE ZMMT001_GRN_GATE OCCURS 0 WITH HEADER LINE.
DATA : IT_ZMMT02 LIKE ZMMT002_GRN_ITEM OCCURS 0 WITH HEADER LINE.
DATA : BEGIN OF IT_TEMP_EKPO OCCURS 0,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
END OF IT_TEMP_EKPO.
DATA : BEGIN OF IT_MSEG OCCURS 0,
MBLNR LIKE MSEG-MBLNR,
MJAHR LIKE MSEG-MJAHR,
ZEILE LIKE MSEG-ZEILE,
BWART LIKE MSEG-BWART,
MATNR LIKE MSEG-MATNR,
EBELN LIKE MSEG-EBELN,
EBELP LIKE MSEG-EBELP,
BUDAT LIKE MKPF-BUDAT,
MENGE LIKE MSEG-MENGE,
END OF IT_MSEG.
DATA : BEGIN OF IT_TEMP_MSEG OCCURS 0,
MBLNR LIKE MSEG-MBLNR,
MJAHR LIKE MSEG-MJAHR,
ZEILE LIKE MSEG-ZEILE,
BWART LIKE MSEG-BWART,
EBELN LIKE MSEG-EBELN,
END OF IT_TEMP_MSEG.
DATA : BEGIN OF IT_TEMP_MKPF OCCURS 0,
MBLNR LIKE MKPF-MBLNR,
MJAHR LIKE MKPF-MJAHR,
BUDAT LIKE MKPF-BUDAT,
BKTXT LIKE MKPF-BKTXT,
END OF IT_TEMP_MKPF.
*Data Declaration
DATA : WK_SNO TYPE I,
WK_LIFNR LIKE LFA1-LIFNR,
WK_EBELN(10) TYPE C,
WK_VBELN(10) TYPE C,
WK_FKDAT TYPE D,
WK_NAME LIKE LFA1-NAME1,
WK_SCHNO(10) TYPE C,
WK_CHALNO(10) TYPE C,
WK_CHALDATE(10) TYPE C,
WK_GRNO(10) TYPE C,
WK_GRDATE(10) TYPE C,
WK_VEHICLE(10) TYPE C,
WK_CARRIER(10) TYPE C,
WK_FREIGHT(13) TYPE P DECIMALS 2,
WK_MDOC(3) TYPE C,
WK_DEPT(7) TYPE C,
WK_MODE(7) TYPE C,
WK_BASIC(13) TYPE P DECIMALS 2,
WK_EXCISE(13) TYPE P DECIMALS 2,
WK_TAX(13) TYPE P DECIMALS 2,
WK_APPVAL(13) TYPE P DECIMALS 2,
WK_CHAL(2) TYPE C,
WK_FORM38(9) TYPE C,
WK_COMMENT(30) TYPE C,
WK_MAKTX(40) TYPE C,
WK_LINES TYPE I,
WK_TOTAL LIKE MARD-LABST,
WK_LGORT LIKE MARD-LGORT,
WK_EXCISE_IND,
WK_TOT_EXCISE LIKE EKPO-NETWR,
WK_DIFF LIKE EKPO-NETWR,
WK_BSTYP LIKE EKKO-BSTYP,
WK_BSART LIKE EKKO-BSART,
WK_DIFF_QTY LIKE EKET-MENGE,
WK_101_QTY LIKE EKET-MENGE,
WK_102_QTY LIKE EKET-MENGE,
WK_122_QTY LIKE EKET-MENGE,
WK_WERKS LIKE EKPO-WERKS,
WK_CHAR_SNO TYPE STRING,
WK_DATE LIKE SY-DATUM,
WK_TIME LIKE SY-UZEIT.
DATA : WK_DATE1 LIKE SY-DATUM,
WK_DATE2 LIKE SY-DATUM,
WK_FISYEAR TYPE I,
WK_CHAR_YEAR(20) TYPE C.
DATA : V_UCOMM TYPE SY-UCOMM,
V_INDEX(10) TYPE C,
V_QUANTITY(8) TYPE C.
**DECLARATION FOR INPUT HELP*
TYPES : BEGIN OF VALUES,
TXZ01 LIKE EKPO-TXZ01,
MENGE LIKE EKPO-MENGE,
MATNR LIKE EKPO-MATNR,
END OF VALUES.
TYPES : BEGIN OF VALUES1,
EBELN LIKE EKKO-EBELN,
END OF VALUES1.
TYPES : BEGIN OF VALUES2,
NAME1 LIKE LFA1-NAME1,
LIFNR LIKE LFA1-LIFNR,
END OF VALUES2.
DATA: PROGNAME LIKE SY-REPID,
DYNNUM LIKE SY-DYNNR,
DYNPRO_VALUES TYPE TABLE OF DYNPREAD,
FIELD_VALUE LIKE LINE OF DYNPRO_VALUES,
VALUES_TAB TYPE TABLE OF VALUES WITH HEADER LINE,
VALUES_TAB1 TYPE TABLE OF VALUES1,
VALUE_EBELN TYPE TABLE OF VALUES1.
VALUES_TAB2 TYPE TABLE OF VALUES2.
DATA : VALUES_TAB2 TYPE VALUES2 OCCURS 0 WITH HEADER LINE.
DATA : RETURN_TAB LIKE DDSHRETVAL OCCURS 0 WITH HEADER LINE.
*nidhi
DATA: BEGIN OF IT_LFA1 OCCURS 0,
LIFNR LIKE LFA1-LIFNR,
ADRNR LIKE LFA1-ADRNR,
END OF IT_LFA1.
DATA: BEGIN OF IT_ADR6 OCCURS 0,
ADDRNUMBER TYPE ADR6-ADDRNUMBER,
SMTP_ADDR TYPE ADR6-SMTP_ADDR,
END OF IT_ADR6.
*nidhi
*& Module FILL_TABLE_CONTROL OUTPUT
text
MODULE FILL_TABLE_CONTROL OUTPUT.
READ TABLE IT_TEMP_TC1 INTO IT_TC1 INDEX TC1-CURRENT_LINE.
ENDMODULE. " FILL_TABLE_CONTROL OUTPUT
*& Module READ_TABLE_CONTROL INPUT
text
MODULE READ_TABLE_CONTROL INPUT.
*Validation for Item code
CLEAR : EKPO-MATNR,
EKPO-WERKS.
IF sy-uname = 'GATE1020'.
IF ( SY-UNAME = 'GATE1010' OR SY-UNAME = 'GATE1020' OR
SY-UNAME = 'GATE1030' OR SY-UNAME = 'GATE1040' OR
SY-UNAME = 'GATE1050' OR SY-UNAME = 'GATE1060' OR
SY-UNAME = 'GATE1070' OR SY-UNAME = 'GATE1080' OR
SY-UNAME = 'ABAP' ).
**SELECT SINGLE bstyp FROM EKKO INTO WK_BSTYP WHERE ebeln = wk_ebeln.
**SELECT SINGLE bsart FROM EKKO INTO WK_BSART WHERE ebeln = wk_ebeln.
READ TABLE VALUES_TAB WITH KEY MATNR = IT_TC1-ITEMCODE.
**ELSE.
SELECT SINGLE MATNR WERKS
FROM EKPO CLIENT SPECIFIED
INTO (EKPO-MATNR , EKPO-WERKS )
WHERE MANDT = SY-MANDT AND
EBELN = WK_EBELN AND
MATNR EQ IT_TC1-ITEMCODE.
ENDIF.
IF SY-SUBRC NE 0 AND NOT IT_TC1-ITEMCODE IS INITIAL.
CLEAR it_tc1.
MESSAGE E003 WITH TEXT-002.
ELSE.
SELECT SINGLE MAKTX FROM MAKT
CLIENT SPECIFIED
INTO WK_MAKTX WHERE
MANDT = SY-MANDT AND
MATNR = IT_TC1-ITEMCODE AND SPRAS = SY-LANGU.
ENDIF.
ENDIF.
**SELECT SINGLE bstyp FROM EKKO INTO WK_BSTYP WHERE ebeln = wk_ebeln.
**SELECT SINGLE bsart FROM EKKO INTO WK_BSART WHERE ebeln = wk_ebeln.
IF ( SY-UNAME = 'GATE1010' OR SY-UNAME = 'GATE1020' OR
SY-UNAME = 'GATE1030' OR SY-UNAME = 'GATE1040' OR
SY-UNAME = 'GATE1050' OR SY-UNAME = 'GATE1060' OR
SY-UNAME = 'GATE1070' OR SY-UNAME = 'GATE1080' OR SY-UNAME =
'ABAP' ).
IF WK_BSART = 'ZLR' .
Validation for Quantity.
IF NOT IT_TC1-QUANTITY IS INITIAL.
READ TABLE VALUES_TAB WITH KEY MATNR = IT_TC1-ITEMCODE.
IF SY-SUBRC EQ 0 AND IT_TC1-QUANTITY GT VALUES_TAB-MENGE.
MESSAGE E003 WITH TEXT-013.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
*Validation for Max.Stock Level
CLEAR : MARC-MABST.
SELECT SINGLE MABST FROM MARC
CLIENT SPECIFIED
INTO MARC-MABST
WHERE MANDT = SY-MANDT AND
MATNR = IT_TC1-ITEMCODE AND
WERKS = EKPO-WERKS.
CLEAR : MARD-LABST ,
MARD-INSME .
SELECT SINGLE labst insme FROM mard
CLIENT SPECIFIED
INTO (mard-labst , mard-insme )
WHERE MANDT = SY-MANDT AND
matnr = it_tc1-itemcode
AND werks = ekpo-werks.
SELECT SUM( LABST ) SUM( INSME ) FROM MARD
CLIENT SPECIFIED
INTO (MARD-LABST , MARD-INSME )
WHERE MANDT = SY-MANDT AND
MATNR = IT_TC1-ITEMCODE
AND WERKS = EKPO-WERKS.
CLEAR : WK_TOTAL.
WK_TOTAL = MARD-LABST + MARD-INSME + IT_TC1-QUANTITY.
IF WK_BSART = 'ZLR'.
IF WK_TOTAL GT MARC-MABST.
MESSAGE E001 WITH IT_TC1-ITEMCODE.
ENDIF.
ENDIF.
Appending the table control data to Internal table
READ TABLE IT_TEMP_TC1 INDEX TC1-CURRENT_LINE.
IT_TC1-SNO = TC1-CURRENT_LINE.
IF SY-SUBRC EQ 0.
MODIFY IT_TEMP_TC1 FROM IT_TC1 INDEX TC1-CURRENT_LINE.
ELSE.
READ TABLE IT_TEMP_TC1 WITH KEY ITEMCODE = IT_TC1-ITEMCODE.
IF SY-SUBRC NE 0.
IT_TC1-ITEMNAME = WK_MAKTX.
IF IT_TC1-ITEMCODE IS INITIAL.
CLEAR IT_TC1.
ELSE.
APPEND IT_TC1 TO IT_TEMP_TC1.
ENDIF.
ELSE.
MESSAGE E003 WITH TEXT-004.
ENDIF.
ENDIF.
CLEAR : J_1IMTCHID-J_1ICAPIND.
SELECT SINGLE J_1ICAPIND FROM J_1IMTCHID
CLIENT SPECIFIED
INTO J_1IMTCHID-J_1ICAPIND
WHERE MANDT = SY-MANDT AND
MATNR = IT_TC1-ITEMCODE AND
WERKS = EKPO-WERKS.
IF SY-SUBRC EQ 0.
IF J_1IMTCHID-J_1ICAPIND = 'N'.
WK_EXCISE_IND = 'N'.
ELSE.
WK_EXCISE_IND = 'E'.
ENDIF.
ENDIF.
ENDMODULE. " READ_TABLE_CONTROL INPUT
*& Module USER_COMMAND_1000 INPUT
text
MODULE USER_COMMAND_1000 INPUT.
V_UCOMM = SY-UCOMM.
CASE V_UCOMM.
WHEN 'WK_SAVE'.
IF WK_APPVAL > 0.
IF ( SY-UNAME = 'STORE1010' OR SY-UNAME = 'STORE1020' OR
SY-UNAME = 'STORE1030' OR SY-UNAME = 'STORE1040' OR
SY-UNAME = 'STORE1050' OR SY-UNAME = 'STORE1060' OR
SY-UNAME = 'STORE1070' OR SY-UNAME = 'STORE1080' ).
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
INPUT = WK_VBELN
IMPORTING
OUTPUT = WK_VBELN.
SELECT * FROM EKKO INTO TABLE IT_EKKO WHERE EBELN = WK_EBELN
AND
LOEKZ NE 'X'.
IF SY-SUBRC EQ 0.
READ TABLE IT_EKKO INDEX 1.
WK_BSTYP = IT_EKKO-BSTYP.
ENDIF.
SELECT * FROM EKPO CLIENT SPECIFIED
INTO TABLE IT_EKPO WHERE
MANDT = SY-MANDT AND
EBELN = WK_EBELN AND LOEKZ NE 'X'.
SORT IT_EKPO BY EBELN EBELP.
IF WK_BSTYP = 'L'.
SELECT * FROM EKET CLIENT SPECIFIED
INTO TABLE IT_EKET WHERE
MANDT = SY-MANDT AND
EBELN = WK_EBELN.
IF SY-SUBRC EQ 0.
SORT IT_EKET BY EBELN EBELP ETENR.
LOOP AT IT_EKPO.
CLEAR WK_DIFF_QTY.
LOOP AT IT_EKET WHERE EBELN = IT_EKPO-EBELN
AND EBELP = IT_EKPO-EBELP
AND EINDT LE SY-DATUM.
WK_DIFF_QTY = WK_DIFF_QTY + IT_EKET-MENGE -
IT_EKET-WEMNG.
ENDLOOP.
IF WK_DIFF_QTY GT 0.
IT_TEMP_EKPO-EBELN = IT_EKET-EBELN.
IT_TEMP_EKPO-EBELP = IT_EKET-EBELP.
IT_TEMP_EKPO-MATNR = IT_EKPO-MATNR.
APPEND IT_TEMP_EKPO.
ENDIF.
ENDLOOP.
ENDIF.
ELSEIF WK_BSTYP = 'F'.
SELECT * FROM EKET
CLIENT SPECIFIED
INTO TABLE IT_EKET
WHERE MANDT = SY-MANDT AND
EBELN = IT_EKPO-EBELN.
LOOP AT IT_EKPO.
CLEAR : WK_DIFF_QTY.
READ TABLE IT_EKET WITH KEY EBELN = IT_EKPO-EBELN
EBELP = IT_EKPO-EBELP.
IF SY-SUBRC EQ 0.
WK_DIFF_QTY = IT_EKPO-MENGE - IT_EKET-WEMNG.
ENDIF.
IF WK_DIFF_QTY GT 0.
IT_TEMP_EKPO-EBELN = IT_EKET-EBELN.
IT_TEMP_EKPO-EBELP = IT_EKET-EBELP.
IT_TEMP_EKPO-MATNR = IT_EKPO-MATNR.
APPEND IT_TEMP_EKPO.
ENDIF.
ENDLOOP.
ENDIF.
SORT IT_TEMP_EKPO BY EBELN EBELP.
PERFORM BDC_DYNPRO USING 'SAPLMIGO' '0001'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=OK_GO'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'GODYNPRO-PO_NUMBER'.
PERFORM BDC_FIELD USING 'GODYNPRO-PO_NUMBER'
WK_EBELN.
PERFORM BDC_DYNPRO USING 'SAPLMIGO' '0001'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=OK_GO'.
IF WK_EXCISE_IND = 'E'.
PERFORM BDC_FIELD USING 'J_1IEXHEAD-EXNUM'
WK_VBELN.
PERFORM BDC_FIELD USING 'J_1IEXHEAD-EXDAT'
WK_FKDAT.
PERFORM BDC_FIELD USING 'GOHEAD-LFSNR'
WK_VBELN.
ELSE.
PERFORM BDC_FIELD USING 'GOHEAD-LFSNR'
WK_VBELN.
ENDIF.
CLEAR : WK_CHAR_SNO.
WK_CHAR_SNO = WK_SNO.
CONDENSE WK_CHAR_SNO NO-GAPS.
PERFORM BDC_FIELD USING 'GOHEAD-BKTXT'
WK_CHAR_SNO.
LOOP AT IT_TEMP_TC1.
READ TABLE IT_TEMP_EKPO WITH KEY MATNR =
IT_TEMP_TC1-ITEMCODE.
IF SY-SUBRC EQ 0.
CLEAR V_INDEX.
V_INDEX = SY-TABIX.
CONDENSE V_INDEX NO-GAPS.
PERFORM BDC_DYNPRO USING 'SAPLMIGO' '0001'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=OK_GO'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'GODYNPRO-DETAIL_ZEILE'.
PERFORM BDC_FIELD USING 'GODYNPRO-DETAIL_ZEILE'
PERFORM BDC_FIELD USING 'GODYNPRO-DETAIL_ZEILE'
V_INDEX.
PERFORM BDC_DYNPRO USING 'SAPLMIGO' '0001'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=OK_GO'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'GOITEM-ERFMG'.
PERFORM BDC_FIELD USING 'GOITEM-ERFMG'
CLEAR V_QUANTITY.
V_QUANTITY = IT_TEMP_TC1-QUANTITY.
CONDENSE V_QUANTITY NO-GAPS.
PERFORM BDC_FIELD USING 'GOITEM-ERFMG'
V_QUANTITY.
PERFORM BDC_FIELD USING 'GOITEM-LSMNG'
V_QUANTITY.
perform bdc_field using 'GOITEM-LGOBE'
WK_LGORT.
ENDIF.
ENDLOOP.
CALL TRANSACTION 'MIGO' USING BDCDATA
MODE 'E'
UPDATE 'L'.
IF SY-SUBRC NE 0.
MESSAGE E003 WITH TEXT-003.
LOOP AT SCREEN.
SCREEN-INPUT = 1.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
LEAVE PROGRAM.
ELSE.
CLEAR : WK_TOT_EXCISE.
IF NOT WK_EXCISE IS INITIAL.
LOOP AT IT_TEMP_TC1.
READ TABLE IT_EKPO WITH KEY MATNR = IT_TEMP_TC1-ITEMCODE.
IF SY-SUBRC EQ 0.
WK_TOT_EXCISE = WK_TOT_EXCISE +
( ( ( IT_EKPO-NETWR / IT_EKPO-MENGE ) * 16 / 100 )
IT_TEMP_TC1-QUANTITY ).
ENDIF.
ENDLOOP.
WK_DIFF = WK_EXCISE - WK_TOT_EXCISE.
IF WK_DIFF LE 0.
WK_DIFF = -1 * WK_DIFF.
ENDIF.
IF WK_DIFF GE 1.
WK_COMMENT = 'Difference in Excise. Please Check!'.
ENDIF.
ENDIF.
SELECT * FROM EKPO CLIENT SPECIFIED
INTO TABLE IT_EKPO WHERE
MANDT = SY-MANDT AND
EBELN = WK_EBELN.
IF SY-SUBRC EQ 0.
READ TABLE IT_EKPO INDEX 1.
WK_WERKS = IT_EKPO-WERKS.
ENDIF.
SELECT * FROM ZMMT001_GRN_GATE
CLIENT SPECIFIED
INTO TABLE IT_ZMMT01
WHERE MANDT = SY-MANDT AND
WERKS = WK_WERKS.
IF SY-SUBRC EQ 0.
SORT IT_ZMMT01 BY SERIAL DESCENDING.
READ TABLE IT_ZMMT01 INDEX 1.
WK_SNO = IT_ZMMT01-SERIAL + 1.
ELSE.
WK_SNO = 1.
ENDIF.
CLEAR WK_ZMMT01.
WK_ZMMT01-MANDT = SY-MANDT.
WK_ZMMT01-SERIAL = WK_SNO.
WK_ZMMT01-WERKS = WK_WERKS.
WK_ZMMT01-EBELN = WK_EBELN.
WK_ZMMT01-LIFNR = WK_LIFNR.
WK_ZMMT01-CHALNO = WK_CHALNO.
WK_ZMMT01-CHALDATE = WK_CHALDATE.
WK_ZMMT01-BILLNO = WK_VBELN.
WK_ZMMT01-BILLDATE = WK_FKDAT.
WK_ZMMT01-GRNUMBER = WK_GRNO.
WK_ZMMT01-GRDATE = WK_GRDATE.
WK_ZMMT01-VEHICLE = WK_VEHICLE.
WK_ZMMT01-CARRIER = WK_CARRIER.
WK_ZMMT01-FREIGHT = WK_FREIGHT.
WK_ZMMT01-MDOC = WK_MDOC.
WK_ZMMT01-DEPT = WK_DEPT.
WK_ZMMT01-PAYMODE = WK_MODE.
WK_ZMMT01-BASIC = WK_BASIC.
WK_ZMMT01-EXCISE = WK_EXCISE.
WK_ZMMT01-TAXAMT = WK_TAX.
WK_ZMMT01-APPVAL = WK_APPVAL.
WK_ZMMT01-CHALINV = WK_CHAL.
WK_ZMMT01-FORM38 = WK_FORM38.
WK_ZMMT01-COMMENTS = WK_COMMENT.
WK_ZMMT01-CDATE = SY-DATUM.
WK_ZMMT01-CTIME = SY-UZEIT.
WK_ZMMT01-PERSON = SY-UNAME.
IF WK_FKDAT+4(2) = '04' OR
WK_FKDAT+4(2) = '05' OR
WK_FKDAT+4(2) = '06' OR
WK_FKDAT+4(2) = '07' OR
WK_FKDAT+4(2) = '08' OR
WK_FKDAT+4(2) = '09' OR
WK_FKDAT+4(2) = '10' OR
WK_FKDAT+4(2) = '11' OR
WK_FKDAT+4(2) = '12'.
WK_DATE10(4) = WK_FKDAT0(4).
WK_DATE1+4(2) = '04'.
WK_DATE1+6(2) = '01'.
ELSEIF
WK_FKDAT+4(2) = '01' OR
WK_FKDAT+4(2) = '02' OR
WK_FKDAT+4(2) = '03'.
WK_FISYEAR = WK_FKDAT+0(4).
WK_FISYEAR = WK_FISYEAR - 1.
WK_CHAR_YEAR = WK_FISYEAR.
CONDENSE WK_CHAR_YEAR NO-GAPS.
WK_DATE1+0(4) = WK_CHAR_YEAR.
WK_DATE1+4(2) = '04'.
WK_DATE1+6(2) = '01'.
ELSE.
ENDIF.
nidhi
SELECT LIFNR ADRNR FROM LFA1 INTO TABLE IT_LFA1 WHERE LIFNR =
WK_ZMMT01-LIFNR.
SELECT ADDRNUMBER SMTP_ADDR FROM ADR6 INTO TABLE IT_ADR6 FOR
ALL ENTRIES IN IT_LFA1 WHERE ADDRNUMBER = IT_LFA1-ADRNR.
SELECT SINGLE * FROM ZMMT001_GRN_GATE
CLIENT SPECIFIED
WHERE MANDT = SY-MANDT AND
WERKS = WK_WERKS AND
LIFNR = WK_LIFNR AND
BILLNO = WK_VBELN AND
BILLDATE GE WK_DATE1.
IF SY-SUBRC EQ 0.
MESSAGE E003 WITH TEXT-006.
ENDIF.
CLEAR IT_ZMMT02.
REFRESH IT_ZMMT02.
LOOP AT IT_TEMP_TC1.
IT_ZMMT02-MANDT = SY-MANDT.
IT_ZMMT02-SERIAL = WK_SNO.
IT_ZMMT02-WERKS = WK_WERKS.
IT_ZMMT02-EBELN = WK_EBELN.
IT_ZMMT02-ITEMCODE = IT_TEMP_TC1-ITEMCODE.
IT_ZMMT02-DESCRIPTION = IT_TEMP_TC1-ITEMNAME.
IT_ZMMT02-QUANTITY = IT_TEMP_TC1-QUANTITY.
IT_ZMMT02-EXCISE = IT_TEMP_TC1-EXCISE.
APPEND IT_ZMMT02.
CLEAR IT_ZMMT02.
ENDLOOP.
IF IT_ZMMT02[] IS INITIAL.
MESSAGE E003 WITH TEXT-007.
ENDIF.
IF SY-UNAME = 'GATE1010' AND WK_WERKS NE '1010'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'GATE1020' AND WK_WERKS NE '1020'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'GATE1030' AND WK_WERKS NE '1030'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'GATE1040' AND WK_WERKS NE '1040'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'GATE1050' AND WK_WERKS NE '1050'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'GATE1060' AND WK_WERKS NE '1060'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'ABAP' AND WK_WERKS NE 'ABAP'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'GATE1070' AND WK_WERKS NE '1070'.
MESSAGE E003 WITH TEXT-008.
ELSEIF SY-UNAME = 'GATE1080' AND WK_WERKS NE '1080'.
MESSAGE E003 WITH TEXT-008.
ENDIF.
INSERT ZMMT001_GRN_GATE FROM WK_ZMMT01.
INSERT ZMMT002_GRN_ITEM FROM TABLE IT_ZMMT02.
IF SY-SUBRC EQ 0.
COMMIT WORK.
MESSAGE I002 WITH WK_SNO.
********nidhi*******************************************************
CALL SCREEN 1001.
CLEAR WK_LIFNR.
CLEAR WK_EBELN.
CLEAR WK_NAME.
CLEAR WK_SCHNO.
CLEAR WK_CHALNO.
CLEAR WK_CHALDATE.
CLEAR WK_VBELN.
CLEAR WK_FKDAT.
CLEAR WK_GRNO.
CLEAR WK_GRDATE.
CLEAR WK_VEHICLE.
CLEAR WK_CARRIER.
CLEAR WK_FREIGHT.
CLEAR WK_MDOC.
CLEAR WK_DEPT.
CLEAR WK_MODE.
CLEAR WK_BASIC.
CLEAR WK_EXCISE.
CLEAR WK_TAX.
CLEAR WK_APPVAL.
CLEAR WK_CHAL.
CLEAR WK_FORM38.
REFRESH IT_TEMP_TC1.
CLEAR WK_FISYEAR.
CLEAR WK_DATE1.
CLEAR WK_CHAR_YEAR.
CALL TRANSACTION 'ZMMI001'.
ELSE.
ROLLBACK WORK.
MESSAGE E003 WITH TEXT-006.
ENDIF.
ENDIF.
ELSE.
MESSAGE E009 WITH TEXT-014.
ENDIF.
WHEN 'WK_EXIT'.
WHEN 'WK_CLEAR'.
CLEAR WK_LIFNR.
CLEAR WK_EBELN.
CLEAR WK_NAME.
CLEAR WK_SCHNO.
CLEAR WK_CHALNO.
CLEAR WK_CHALDATE.
CLEAR WK_VBELN.
CLEAR WK_FKDAT.
CLEAR WK_GRNO.
CLEAR WK_GRDATE.
CLEAR WK_VEHICLE.
CLEAR WK_CARRIER.
CLEAR WK_FREIGHT.
CLEAR WK_MDOC.
CLEAR WK_DEPT.
CLEAR WK_MODE.
CLEAR WK_BASIC.
CLEAR WK_EXCISE.
CLEAR WK_TAX.
CLEAR WK_APPVAL.
CLEAR WK_CHAL.
CLEAR WK_FORM38.
REFRESH IT_TEMP_TC1 .
CLEAR WK_FISYEAR.
CLEAR WK_DATE1.
CLEAR WK_CHAR_YEAR.
WHEN 'DELETE'.
DELETE IT_TEMP_TC1 WHERE SEL = 'X'.
ENDCASE.
ENDMODULE. " USER_COMMAND_1000 INPUT
Start new screen *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM. "BDC_DYNPRO
Insert field *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
ENDIF.
ENDFORM. "BDC_FIELD
*& Module STATUS_1000 OUTPUT
text
MODULE STATUS_1000 OUTPUT.
SET PF-STATUS 'GRN'.
SET TITLEBAR 'GRN'.
PROGNAME = SY-REPID.
DYNNUM = SY-DYNNR.
CLEAR: FIELD_VALUE, DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'IT_TC1-ITEMCODE'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'WK_EBELN'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'WK_LIFNR'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
LOOP AT SCREEN.
IF SCREEN-NAME NE 'WK_COMMENT'.
SCREEN-INPUT = 1.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
IF ( SY-UNAME = 'GATE1010' OR SY-UNAME = 'GATE1020' OR
SY-UNAME = 'GATE1030' OR SY-UNAME = 'GATE1040' OR
SY-UNAME = 'GATE1050' OR SY-UNAME = 'GATE1060' OR
SY-UNAME = 'GATE1070' OR SY-UNAME = 'GATE1080' OR SY-UNAME =
'ABAP' ).
LOOP AT SCREEN.
IF SCREEN-NAME = 'WK_SNO' OR
SCREEN-NAME = 'SNO' OR
SCREEN-NAME = 'WK_COMMENT' .
SCREEN-INVISIBLE = 1.
SCREEN-ACTIVE = 0.
SCREEN-INPUT = 0.
SCREEN-OUTPUT = 0.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
IF WK_LIFNR IS INITIAL.
SET CURSOR FIELD 'WK_LIFNR'.
ELSEIF WK_EBELN IS INITIAL.
SET CURSOR FIELD 'WK_EBELN'.
ELSEIF WK_VBELN IS INITIAL.
SET CURSOR FIELD 'WK_VBELN'.
ELSEIF WK_FKDAT IS INITIAL.
SET CURSOR FIELD 'WK_FKDAT'.
ENDIF.
ELSE.
IF NOT WK_SNO IS INITIAL.
IF SY-UNAME = 'STORE1010'.
WK_WERKS = '1010'.
ELSEIF SY-UNAME = 'STORE1020'.
WK_WERKS = '1020'.
ELSEIF SY-UNAME = 'STORE1030'.
WK_WERKS = '1030'.
ELSEIF SY-UNAME = 'STORE1040'.
WK_WERKS = '1040'.
ELSEIF SY-UNAME = 'STORE1050'.
WK_WERKS = '1050'.
ELSEIF SY-UNAME = 'STORE1060'.
WK_WERKS = '1060'.
ELSEIF SY-UNAME = 'STORE1070'.
WK_WERKS = '1070'.
ELSEIF SY-UNAME = 'STORE1080'.
WK_WERKS = '1080'.
ENDIF.
SELECT SINGLE * FROM ZMMT001_GRN_GATE INTO WK_ZMMT01
WHERE SERIAL = WK_SNO AND
WERKS = WK_WERKS.
IF SY-SUBRC EQ 0.
WK_WERKS = WK_ZMMT01-WERKS.
WK_EBELN = WK_ZMMT01-EBELN.
WK_LIFNR = WK_ZMMT01-LIFNR.
WK_CHALNO = WK_ZMMT01-CHALNO.
WK_CHALDATE = WK_ZMMT01-CHALDATE.
WK_VBELN = WK_ZMMT01-BILLNO.
WK_FKDAT = WK_ZMMT01-BILLDATE.
WK_GRNO = WK_ZMMT01-GRNUMBER.
WK_GRDATE = WK_ZMMT01-GRDATE.
WK_VEHICLE = WK_ZMMT01-VEHICLE.
WK_CARRIER = WK_ZMMT01-CARRIER.
WK_FREIGHT = WK_ZMMT01-FREIGHT.
WK_MDOC = WK_ZMMT01-MDOC.
WK_DEPT = WK_ZMMT01-DEPT.
WK_MODE = WK_ZMMT01-PAYMODE.
WK_BASIC = WK_ZMMT01-BASIC.
WK_EXCISE = WK_ZMMT01-EXCISE.
WK_TAX = WK_ZMMT01-TAXAMT.
WK_APPVAL = WK_ZMMT01-APPVAL.
WK_CHAL = WK_ZMMT01-CHALINV.
WK_FORM38 = WK_ZMMT01-FORM38.
WK_COMMENT = WK_ZMMT01-COMMENTS.
SELECT * FROM ZMMT002_GRN_ITEM INTO TABLE IT_ZMMT02
WHERE SERIAL = WK_SNO AND
WERKS = WK_WERKS.
IF SY-SUBRC EQ 0.
CLEAR IT_TEMP_TC1.
REFRESH IT_TEMP_TC1.
LOOP AT IT_ZMMT02.
IT_TEMP_TC1-SNO = SY-TABIX.
IT_TEMP_TC1-ITEMCODE = IT_ZMMT02-ITEMCODE.
IT_TEMP_TC1-ITEMNAME = IT_ZMMT02-DESCRIPTION.
IT_TEMP_TC1-QUANTITY = IT_ZMMT02-QUANTITY.
APPEND IT_TEMP_TC1.
CLEAR IT_TEMP_TC1.
ENDLOOP.
ENDIF.
ENDIF.
LOOP AT SCREEN.
IF ( SCREEN-NAME NE 'WK_SNO' ) AND
( SCREEN-NAME NE 'WK_SAVE' ) AND
( SCREEN-NAME NE 'WK_CLEAR' ) AND
( SCREEN-NAME NE 'WK_EXIT' ).
SCREEN-INPUT = 0.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
LOOP AT TC1-COLS INTO COLS WHERE INDEX GT 0.
COLS-SCREEN-INPUT = '0'.
MODIFY TC1-COLS FROM COLS INDEX SY-TABIX.
ENDLOOP.
ENDIF.
ENDIF.
WK_DATE = SY-DATUM.
WK_TIME = SY-UZEIT.
TC1-LINES = 20.
ENDMODULE. " STATUS_1000 OUTPUT
*& Module EXIT_1000 INPUT
text
MODULE EXIT_1000 INPUT.
CASE SY-UCOMM.
WHEN 'BACK' OR 'CANCEL' OR 'EXIT' OR 'WK_EXIT'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " EXIT_1000 INPUT
*& Module ITEM_CODE INPUT
text
MODULE ITEM_CODE INPUT.
REFRESH : VALUES_TAB.
CLEAR : VALUES_TAB.
IF ( SY-UNAME = 'GATE1020' OR
SY-UNAME = 'GATE1010' OR
SY-UNAME = 'GATE1030' OR
SY-UNAME = 'GATE1040' OR
SY-UNAME = 'GATE1050' OR
SY-UNAME = 'GATE1060' OR
SY-UNAME = 'GATE1070' OR
SY-UNAME = 'STORE1020' OR
SY-UNAME = 'STORE1030' OR
SY-UNAME = 'STORE1040' OR
SY-UNAME = 'STORE1050' OR
SY-UNAME = 'STORE1060' OR
SY-UNAME = 'STORE1070' OR
SY-UNAME = 'STORE1010' OR
SY-UNAME = 'ABAP' ).
SELECT * FROM EKKO CLIENT SPECIFIED
INTO TABLE IT_EKKO WHERE
MANDT = SY-MANDT AND
EBELN = WK_EBELN AND
LOEKZ NE 'X'.
IF SY-SUBRC EQ 0.
READ TABLE IT_EKKO INDEX 1.
WK_BSTYP = IT_EKKO-BSTYP.
WK_BSART = IT_EKKO-BSART.
ENDIF.
if wk_bsart = 'ZLR'.
SELECT * FROM EKPO CLIENT SPECIFIED
INTO TABLE IT_EKPO WHERE
MANDT = SY-MANDT AND
EBELN = WK_EBELN AND
LOEKZ NE 'X'.
SORT IT_EKPO BY EBELN EBELP.
IF WK_BSTYP = 'L' AND WK_BSART = 'ZLR'.
SELECT * FROM EKET CLIENT SPECIFIED
INTO TABLE IT_EKET WHERE
MANDT = SY-MANDT AND
EBELN = WK_EBELN.
IF SY-SUBRC EQ 0.
SORT IT_EKET BY EBELN EBELP ETENR.
LOOP AT IT_EKPO.
CLEAR WK_DIFF_QTY.
LOOP AT IT_EKET WHERE EBELN = IT_EKPO-EBELN
AND EBELP = IT_EKPO-EBELP
AND EINDT LE SY-DATUM.
WK_DIFF_QTY = WK_DIFF_QTY + IT_EKET-MENGE - IT_EKET-WEMNG.
ENDLOOP.
IF WK_DIFF_QTY GT 0.
VALUES_TAB-TXZ01 = IT_EKPO-TXZ01.
VALUES_TAB-MENGE = WK_DIFF_QTY.
VALUES_TAB-MATNR = IT_EKPO-MATNR.
APPEND VALUES_TAB.
ENDIF.
ENDLOOP.
ENDIF.
ELSEIF WK_BSTYP = 'F'.
SELECT mseg~mblnr
mseg~mjahr
mseg~zeile
mseg~bwart
mseg~matnr
mseg~ebeln
mseg~ebelp
mkpf~budat
mseg~menge INTO TABLE it_mseg
FROM mkpf INNER JOIN mseg
ON mkpfmblnr EQ msegmblnr
AND mkpfmjahr EQ msegmjahr
FOR ALL entries IN it_ekpo
WHERE bwart IN ('101','122','102')
AND werks = it_ekpo-werks
AND ebeln = it_ekpo-ebeln
AND ebelp = it_ekpo-ebelp.
SELECT * FROM EKET CLIENT SPECIFIED
INTO TABLE IT_EKET
WHERE MANDT = SY-MANDT AND
EBELN = IT_EKPO-EBELN.
LOOP AT IT_EKPO.
CLEAR : WK_DIFF_QTY.
wk_101_qty,
wk_102_qty,
wk_122_qty.
LOOP AT it_mseg WHERE ebeln = it_ekpo-ebeln AND
ebelp = it_ekpo-ebelp.
IF it_mseg-bwart = '101'.
wk_101_qty = wk_101_qty + it_mseg-menge.
ENDIF.
IF it_mseg-bwart = '102'.
wk_102_qty = wk_102_qty + it_mseg-menge.
ENDIF.
IF it_mseg-bwart = '122'.
wk_122_qty = wk_122_qty + it_mseg-menge.
ENDIF.
ENDLOOP.
if not it_mseg[] is initial.
wk_diff_qty = it_ekpo-menge - wk_101_qty
- wk_102_qty - wk_122_qty.
else.
wk_diff_qty = it_ekpo-menge.
endif.
READ TABLE IT_EKET WITH KEY EBELN = IT_EKPO-EBELN
EBELP = IT_EKPO-EBELP.
IF SY-SUBRC EQ 0.
WK_DIFF_QTY = IT_EKPO-MENGE - IT_EKET-WEMNG.
ENDIF.
IF wk_diff_qty LE it_ekpo-menge.
IF WK_DIFF_QTY GT 0.
VALUES_TAB-TXZ01 = IT_EKPO-TXZ01.
VALUES_TAB-MENGE = WK_DIFF_QTY.
VALUES_TAB-MATNR = IT_EKPO-MATNR.
APPEND VALUES_TAB.
ENDIF.
ENDLOOP.
ENDIF.
ELSE.
SELECT TXZ01
MATNR FROM EKPO CLIENT SPECIFIED
INTO CORRESPONDING FIELDS OF TABLE VALUES_TAB
WHERE MANDT = SY-MANDT AND
EBELN = WK_EBELN AND
LOEKZ NE 'X'.
ENDIF.
ELSE.
SELECT TXZ01
MATNR FROM EKPO CLIENT SPECIFIED
INTO CORRESPONDING FIELDS OF TABLE VALUES_TAB
WHERE MANDT = SY-MANDT AND
EBELN = WK_EBELN AND
LOEKZ NE 'X'.
ENDIF.
SORT VALUES_TAB BY TXZ01.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'IT_TC1-ITEMCODE'
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'IT_TC1-ITEMCODE'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = VALUES_TAB
RETURN_TAB = RETURN_TAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
*BREAK-POINT.
IF SY-SUBRC = 0.
READ TABLE RETURN_TAB INDEX 1.
SELECT SINGLE MAKTX FROM MAKT CLIENT SPECIFIED
INTO WK_MAKTX WHERE
MANDT = SY-MANDT AND
MATNR = RETURN_TAB-FIELDVAL AND SPRAS = SY-LANGU.
ENDIF.
ENDMODULE. " ITEM_CODE INPUT
*& Module CHECK_INPUT INPUT
text
MODULE CHECK_INPUT INPUT.
CLEAR : EKKO-EBELN , EKKO-LIFNR.
SELECT SINGLE EBELN LIFNR FROM EKKO CLIENT SPECIFIED
INTO (EKKO-EBELN , EKKO-LIFNR ) WHERE
MANDT = SY-MANDT AND
EBELN = WK_EBELN.
IF SY-SUBRC NE 0 AND ( SY-UNAME = 'GATE1010' OR
SY-UNAME = 'GATE1020' OR
SY-UNAME = 'GATE1030' OR
SY-UNAME = 'GATE1040' OR
SY-UNAME = 'GATE1050' OR
SY-UNAME = 'GATE1060' OR
SY-UNAME = 'GATE1070' OR
SY-UNAME = 'GATE1080' OR SY-UNAME = 'ABAP' ).
IF WK_EBELN NE SPACE.
MESSAGE E003 WITH TEXT-001.
ENDIF.
ELSE.
WK_LIFNR = EKKO-LIFNR.
CLEAR : LFA1-NAME1.
SELECT SINGLE NAME1 FROM LFA1 CLIENT SPECIFIED
INTO LFA1-NAME1 WHERE
MANDT = SY-MANDT AND
LIFNR = WK_LIFNR.
IF SY-SUBRC EQ 0.
WK_NAME = LFA1-NAME1.
ENDIF.
ENDIF.
IF ( SY-UNAME = 'GATE1010' OR SY-UNAME = 'GATE1020' OR
SY-UNAME = 'GATE1030' OR SY-UNAME = 'GATE1040' OR
SY-UNAME = 'GATE1050' OR SY-UNAME = 'GATE1060' OR
SY-UNAME = 'GATE1070' OR SY-UNAME = 'GATE1080' OR SY-UNAME =
'ABAP' ).
IF wk_vbeln IS INITIAL.
set cursor field wk_vbeln.
MESSAGE E003 WITH text-009.
ENDIF.
IF wk_fkdat IS INITIAL.
MESSAGE E003 WITH text-010.
ENDIF.
ENDIF.
IF ( SY-UNAME = 'STORE1010' OR SY-UNAME = 'STORE1020' OR
SY-UNAME = 'STORE1030' OR SY-UNAME = 'STORE1040' OR
SY-UNAME = 'STORE1050' OR SY-UNAME = 'STORE1060' OR
SY-UNAME = 'STORE1070' OR SY-UNAME = 'STORE1080' ).
CLEAR : ZMMT001_GRN_GATE.
SELECT SINGLE EBELN CDATE FROM ZMMT001_GRN_GATE
CLIENT SPECIFIED
INTO (ZMMT001_GRN_GATE-EBELN ,
ZMMT001_GRN_GATE-CDATE )
WHERE MANDT = SY-MANDT AND
SERIAL = WK_SNO AND WERKS = WK_WERKS.
IF SY-SUBRC EQ 0.
SELECT MBLNR
MJAHR
BUDAT
BKTXT FROM MKPF CLIENT SPECIFIED
INTO TABLE IT_TEMP_MKPF
WHERE MANDT = SY-MANDT AND
BUDAT = ZMMT001_GRN_GATE-CDATE
AND BKTXT = WK_SNO.
IFHi,
after calling you programm and get the message call transaction su53. That willl display the authorization that you need.
Hope this helps.
Regards
Bernd -
My iPad is asking me for a restriction pass code but I have never set one so I don't know what it is. I'm trying to reset the device because I have sold it.
Try erasing the device using iCloud.com - assuming that you were using iCloud and the Find my iPhone app on the device.
What to do before selling or giving away your iPhone, iPad, or iPod ...
if that doesn't work, try recovery mode.
If you can't update or restore your iOS device - Support - Apple
Maybe you are looking for
-
Qosmio G30-126 monitor become black and FN buttons don't work
Hello, I have small problem, ehm two problems but perhaps small for you :) Last week I install Vista ultimate WITHOUT RECOVERY CD.. It's OK, but I'm closing cover of notebook and instantly open, monitor become black and i can't anything do beyond res
-
How do I move a photo from Photostream to a folder/album in Photostream?
How do I move a photo from Photostream to a folder/album in Photostream?
-
Does mac and imovie 11 support 1080p video?
-
I book g4 crashing when sleeping
lately, although i recently have had both the logic board and hard drive replaced, my ibook g4 has been crashing when i leave it sleeping. it is unresponsive and i have to manually turn off the computer. when i try to restart a gray screen with a fla
-
How to process 'Sequencial Vertices to Polygon'
Hi~ I made a table of sequencial vertices from polygon using by 'SDO_UTIL.GETNUMVERTICES'. The table has following four columns, *"original primarykey, coord. of X, coord. of Y, ID(sequence)"*. PK X Y ID 11847404 193952.2429 432465.99