Update process quits at 51%, get an update failed message

My OS is Mac OS 10.8.4
When I click update (e.g for Photoshop) in the Creative Cloud vertical box I get when I click the blue swirly thing, it stops at 51% and another box pops-up. I get the message "There was a problem updating Photoshop CS6, Update Failed, Errors encountered during installation.(U44M1P7)"
I actually have 4 updates: Flash Professional, InDesign, Illustrator, and Photoshop, and ALL stop at around 51% when I click update
What's up doc!

Hi,
Welcome to the forums!
The following might explain and help solve the problem
U44M1P7 - Updates :
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-upda tes-ccm.html
U44M1P7, U44M2P7 - Creative Cloud Help / Can't apply Extension Manager update 6.0.2 | Mac OS :
http://helpx.adobe.com/creative-suite/kb/unable-apply-extension-manage r-update.html
PS: Please try the first link (download updates manually), if that doesn't work then try the second link.
Ankit

Similar Messages

  • I am trying to update I-tunes, but I get the following error message. Service Apple Mobile Device failed to start and wants me to verify I have sufficient priveledges to start system services.  I do not know what to do.

    I am trying to update I-tunes, but I get the following error message. Service Apple Mobile Device failed to start and wants me to verify I have sufficient priveledges to start system services.  I do not know what to do. I am the only user on my HP Pavillion laptop. Help!

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

  • HT204266 25 apps on my wife's phone need updating and now it "Cannot connect to iTunes Store" only when i try to update them for her.  I can access the iTunes store for all other options but not to update.  How can I get her updated?

    25 apps on my wife's phone need updating and now it "Cannot connect to iTunes Store" only when i try to update them for her.  I can access the iTunes store for all other options but not to update.  How can I get her updated?

    Try quitting the App Store:
    Tap the home button to get to the home screen. Then double tap the home button, and hold your finger over the App Store icon. Tap the red when it appears. Tap the home button again to return to the home screen.
    Try resetting:
    Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.

  • I tried to update my iPhone4's, but get the following error message:   iTunes could not back up the iphone "iPhoneName" because the backup was corrupt or not compatible with the iphone. Delete the backup for this iphone, then try again.

    I tried to update my iPhone4's, but get the following error message:   iTunes could not back up the iphone "iPhoneName" because the backup was corrupt or not compatible with the iphone. Delete the backup for this iphone, then try again.

    The solution will be found here, select your computer type and software.
    http://support.apple.com/kb/TS2529

  • Trying to update Photoshop CS6 i repeatedly get an "Update Failed" message.

    When trying to update Photoshop CS6 i repeatedly get an "Update Failed" message.  Whats wrong?  Is it because I alread have Photoshop CC installed?

    Haazk385 I would recommend reviewing the installation log files for the update you are attempting to apply.  Please see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to locate and interpret the installation log files.  You are welcome to post any specific errors you discover to this discussion.

  • After updating to Mavericks and trying to updates for my apps I get : This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.

    After updating to Mavericks and trying to updates for my apps I get : This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. My apple id has always been .mac but after the update I used .me. Are these not synonymous?

    Hi everyone yesterday I was experiencing the same problem I am glad to share its fixed now for me
    "This issue is only related to our Apple ID and to to those specific apps which we already have on phone or had installed on phone before except for those apps which we already have in purchase history AppStore>Updates>Purchase(on iPhone) History(having cloud icon next to them) it's something related to our purchase data
    *ITS NOT RELATED TO PHONE OR MAC!
    *RESETTING OR UPDATING THE DEVICE WONT MAKE A DIFFERENCE!
       (As in my case it  was on iPhone 4 7.1.1 iPhone 5s 7.0.3 and iTunes of course )
    Here is how I got it fixed
    I contacted apple support via chat method and I  asked about a solution giving my info.she told me that she submitted my application and in order to resolve this I should not be using my AppStore ID for any purchase for at least 30mins as  doing so may not resolve the issue so I checked it after couple hours and it's fixed
    (As I read in some other discussions that some people asked for solution from apple support and they told them to reset the device or so.. You may need to make your statement clear that it's appearing both on iTunes and iPhone )

  • I am trying to update the software but keep getting a 9006 error message. Any suggestions?

    I am trying to update to iOS5 but keep getting a 9006 error message. Any suggestions?

    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    Try this - Disable your firewall and anitvirus software temporarily.  Then download and install the iOS update.
     Cheers, Tom

  • Trying to update my hotmail password, and I get "Modifying Endpoint Failed" message.  any help appreciated.

    trying to update my hotmail password, and I get "Modifying Endpoint Failed" message.  any help appreciated.

        Thanks for the details, !!!!!!!!!!!!!!!! When using the Droid RAZR M and default email client, Hotmail passwords can be updated more efficiently by completely removing http://vz.to/1FgwQ3a readding http://vz.to/1FgwQ3m the email account. Here are the steps to do so . Please keep us posted on how this works.
    TanishaS1_VZW
    Follow us on Twitter @VZWSupport

  • My Time Capsule hard drive shows up in Finder, but I can't access the disk.  I get a connection failed message.

    I can not access my Time Capsule from the Finder.  This was working, but on 12/25/2011, the disk can no longer be accessed.  It shows up in the Finder, but when I try to connect, I get a "Connection Failed" message.  If I cycle the power, it works for a little while and then fails again.

    hello
    No i'm connect via ethernet (cable) with TC. The problem is when I try to connect to my TC when I'm away from home like for ex. using a free wi fi spot!! Well in this case the icon appear on my Finder but refuse to connet!! ( connection faild ).

  • I get an "install failed" message. "Recovery system can't be created-click restart to return to previous version of OS X." This doesn't work. My Mac continues to try to install Mountain Lion. What is the elegant way to get my system back?

    I get an "install failed" message. "Recovery system can't be created—click restart to return to previous version of OS X." This doesn't work. My Mac continues to try to install Mountain Lion. What is the elegant way to get my system back?

    The first time I attempted to install ML was on a late 2011 MBP.  It ran for three minutes then gave me the error message: Could not install OSX due to an unexpected error.  I was using the original ML install app, not a USB or other drive.  
    After a couple of restarts wiht the same result I saw a message to the effect that the install was trying to close open apps.  I closed apps  manually a few times to no avail.  I shut down instead of restarting then booted into Safe mode (hold down the shift key when starting) and that did it.  The install went smoothly after that. 
    I since installed ML in two iMacs using a cloned copy of the install app on a USB drive.  This time I shut down the computers and booted into Safe Mode first and there were no problems. 
    I don't know if this issue is the one causing you these problems but it is a simple enough solution to try.
    Jay

  • I keep getting a filter fail message when i try to print

    i cannot print, i have a new mac and i need help, can someone help me out?

    Hi @pkjbadala ,
    I see that you are getting a filter failed message, when you try to print. I will certainly do my best to help you.
    Repair the Disk Permissions on the Mac:
    Close all applications.
    On the Apple menu bar, click Go, click Applications and then click Utilities.
    Double-click Disk Utility.
    Highlight your hard drive/partition on the left.
    Click Verify and then Repair Disk Permissions.
    Restart the computer..
    Reset the Printing System:
    Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
    Click the Apple icon and then click System Preferences.
    Click Printers & Scanners.
    Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
    Click OK to confirm the reset.
    Type the correct Name and Password.
    Click OK to reset the printing system.
    Then click the + sign to add the driver, highlight the printer. (you might have to click the drop down to select the printer's name) Then click on the Add button.
    Try and print a document.
    How is the printer connected? (USB/Ethernet/Wireless)
    If you need further assistance, just let me know.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Why do I get a "Transcode Failed" message?

    Dear friends on the forum;
    I have created a complex project in Encore with several levels.  It starts off with an opening menu whose choices are two video files and a link to a sub-menu.  This sub-menu then offers links to several sub-sub menus which, in turn, offer links to a number of video files each.  We are talking a total of 25 movies in all; some short (a minute and a half) some long (90minutes).   The Encore file is on my computer's hard drive and the relevant video files are on an external hard drive, accessed by USB cable.  I have created other DVDs in the past using this arrangement with no trouble.  Why am I having problems now?   Is it because of the complexity of this project?  The total size of these files is about 3 1/2 gb--not too big for the DVD.  I checked the project before clicking "Build" and no problems surfaced.    I am running a Hewlett-Packard HPE-470f computer with a 64-bit Windows 7 o/s.  I have an AMD processor with 3.2 ghz and 8gb of RAM.
    Can anyone help me with this?  Many thanks!
    Regards, Lewis

    That gives me lots of grist for my mill, John.  Thanks!
    Date: Wed, 15 Dec 2010 11:09:15 -0700
    From: [email protected]
    To: [email protected]
    Subject: Why do I get a "Transcode Failed" message?
    I skipped from CS3 (Pentium 4 CPU with 2Gig system ram and 2 hard drives... very slow, but it worked OK for AVI files and overnight Encore encoding) to a new computer for CS5 - read http://forums.adobe.com/thread/652694?tstart=0 
    Since upgrading to CS5 from CS5 may mean a new computer, I can't really advise you on that
    The Windows swap or paging file is where Windows puts things that it needs quick access to... sorta like you put your wallet in your pocket instead of in your dresser drawer, so you have it handy to pay at the grocery store
    The idea is to "spread the load" so no one hard drive is working too hard and becomes bogged down
    Video editing, like "high end" gaming, requires a LOT of computing power
    My previous computer worked for CS3 and AVI... I had to build a new computer for CS5 and AVCHD files
    You should (in my opinion) add a 2nd internal 7200rpm hard drive (never a "green" drive... too slow for video editing) and keep your boot drive for only Windows and software... this is the minimum (again, my opinion... but go read in the hardware sub-forum)
    Read Harm on drive setup http://forums.adobe.com/thread/662972?tstart=0
    - click the embedded picture in Harm's message to enlarge to reading size
    - you need AT LEAST 2 drives for video editing, 3 is better
    - some HD formats work better with (require) RAID
    Read Hunt on Partitions http://forums.adobe.com/thread/650708?tstart=0
    A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0
    And even more hardware discussion http://forums.adobe.com/community/premiere/hardware_forum
    >

  • Why do I keep getting an "authentication failed" message when trying to join my network?

    Why do I keep getting an "authentication failed" message when trying to join my network?

    You may have to shut your computer off and pull the power adapter from both your ISP's Modem and your Router and wait 5 minutes and restart them in the following order.
    1st your ISP's Modem and wait a minute to get your signal and lights.
    2nd do the same with your Router and again you have to wait the minute.
    Last restart your computer and boot in OSX use Safari.

  • New to photoshop. Keep getting an "Import Failed" message

    I'm trying to put videos from a Panisonic HDD video camera on to DVDs but keep getting an "Import Failed" message everytime I try. Why? What am I not doing?

    I suspect that you wiil be using the Adobe Premiere Elements software for editing video in order to create that DVD of your video.  There is a  separate forum at
    http://forums.adobe.com/community/premiere_elements
    I recommed that you post your video import question on that forum because that is where you will find people who use the video related functions of the Adobe Elements software.

  • Software Update utility quits trying to get a list of available updates

    Hello.
    Internet connection through ethernet ADSL modem.
    Yes, I can download updates directly from Apple support pages
    manually, but I don't know exactly what updates do I need (not only for System, for other software also).
    Any assistance will be greatly appreciated.
    Thanks,
    Dmitry

    Thanks, Kappy,
    First link contains a problem description similar to mine:
    Software Update quits unexpectedly with Mac OS X 10.4
    It's possible that Software Update could unexpectedly quit when installing >software in Mac OS X 10.4 Tiger (via a network connection other than your >built-in Ethernet port such as AirPort), but there's a quick and easy fix. Just >make a change in Network preferences:
    From the Apple menu, choose System Preferences.
    Click Network to display its preference pane.
    From the Show pop-up menu, choose Network Port Configurations.
    Select the Built-in Ethernet checkbox to enable the port.
    Click Apply Now.
    That's it. Software Update should now work just fine. If you wish, you can go >back to Network preferences and disable the built-in Ethernet port again. >You don't have to use Ethernet to download updates.
    But all checkboxes (Airport, Ethernet, ....) are already checked.
    Is it an option to manually download 10.4.4 Combo Update from Apple and hope that automatic update will work in 10.4.4? I don't like false hopes

Maybe you are looking for