Update query for a table
Hi
Can any body send valid update query like this:
<sql:update var="XX">
Update emp set name='yy', phone='1234' where id='abc'
</sql:update>
Thanks in Advance
SP
Hi
Can any body send valid update query like this:
<sql:update var="XX">
Update emp set name='yy', phone='1234' where id='abc'
</sql:update>
Thanks in Advance
SP
Similar Messages
-
Update Query For Hierarchy Table
Hi All
I have a Hierarchy table that has news categories. I want use a query than when user deactivate a category, all child category has been deactivated. For example
1- Politics
1-1- National Politics
1-2- International Politics
1-2-1- Asia
1-2-2- Africa
2- Economic
If Politics has been deactivated, all child must be deactivate. (1-1, 1-2, 1-2-1, 1-2-2)
Please help me
With Best RegardsThis is table structure script:
SET NUMERIC_ROUNDABORT OFF
GO
SET ANSI_PADDING, ANSI_WARNINGS, CONCAT_NULL_YIELDS_NULL, ARITHABORT, QUOTED_IDENTIFIER, ANSI_NULLS ON
GO
IF EXISTS (SELECT * FROM tempdb..sysobjects WHERE id=OBJECT_ID('tempdb..#tmpErrors')) DROP TABLE #tmpErrors
GO
CREATE TABLE #tmpErrors (Error int)
GO
SET XACT_ABORT ON
GO
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE
GO
BEGIN TRANSACTION
GO
PRINT N'Creating schemata'
GO
PRINT N'Creating [dbo].[Modules]'
GO
CREATE TABLE [dbo].[Modules]
[Module_ID] [int] NOT NULL,
[ModuleName] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[ModuleTitle] [nvarchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[Status] [int] NULL
GO
IF @@ERROR<>0 AND @@TRANCOUNT>0 ROLLBACK TRANSACTION
GO
IF @@TRANCOUNT=0 BEGIN INSERT INTO #tmpErrors (Error) SELECT 1 BEGIN TRANSACTION END
GO
PRINT N'Creating primary key [PK_Modules] on [dbo].[Modules]'
GO
ALTER TABLE [dbo].[Modules] ADD CONSTRAINT [PK_Modules] PRIMARY KEY CLUSTERED ([Module_ID])
GO
IF @@ERROR<>0 AND @@TRANCOUNT>0 ROLLBACK TRANSACTION
GO
IF @@TRANCOUNT=0 BEGIN INSERT INTO #tmpErrors (Error) SELECT 1 BEGIN TRANSACTION END
GO
PRINT N'Creating [dbo].[Categories]'
GO
CREATE TABLE [dbo].[Categories]
[Category_ID] [int] NOT NULL IDENTITY(1, 1),
[Module_ID] [int] NOT NULL,
[ParentID] [int] NULL,
[Name] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[Title] [nvarchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[Priority] [int] NULL,
[ThumbnailImage] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[Status] [int] NULL
GO
IF @@ERROR<>0 AND @@TRANCOUNT>0 ROLLBACK TRANSACTION
GO
IF @@TRANCOUNT=0 BEGIN INSERT INTO #tmpErrors (Error) SELECT 1 BEGIN TRANSACTION END
GO
PRINT N'Creating primary key [PK_Categories] on [dbo].[Categories]'
GO
ALTER TABLE [dbo].[Categories] ADD CONSTRAINT [PK_Categories] PRIMARY KEY CLUSTERED ([Category_ID])
GO
IF @@ERROR<>0 AND @@TRANCOUNT>0 ROLLBACK TRANSACTION
GO
IF @@TRANCOUNT=0 BEGIN INSERT INTO #tmpErrors (Error) SELECT 1 BEGIN TRANSACTION END
GO
PRINT N'Adding foreign keys to [dbo].[Categories]'
GO
ALTER TABLE [dbo].[Categories] ADD CONSTRAINT [FK_Categories_Modules] FOREIGN KEY ([Module_ID]) REFERENCES [dbo].[Modules] ([Module_ID])
GO
IF @@ERROR<>0 AND @@TRANCOUNT>0 ROLLBACK TRANSACTION
GO
IF @@TRANCOUNT=0 BEGIN INSERT INTO #tmpErrors (Error) SELECT 1 BEGIN TRANSACTION END
GO
IF EXISTS (SELECT * FROM #tmpErrors) ROLLBACK TRANSACTION
GO
IF @@TRANCOUNT>0 BEGIN
PRINT 'The database update succeeded'
COMMIT TRANSACTION
END
ELSE PRINT 'The database update failed'
GO
DROP TABLE #tmpErrors
GO
This is table data
SET NUMERIC_ROUNDABORT OFF
GO
SET ANSI_PADDING, ANSI_WARNINGS, CONCAT_NULL_YIELDS_NULL, ARITHABORT, QUOTED_IDENTIFIER, ANSI_NULLS, NOCOUNT ON
GO
SET DATEFORMAT YMD
GO
SET XACT_ABORT ON
GO
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE
GO
BEGIN TRANSACTION
-- Pointer used for text / image updates. This might not be needed, but is declared here just in case
DECLARE @pv binary(16)
PRINT(N'Drop constraints from [dbo].[Categories]')
GO
ALTER TABLE [dbo].[Categories] DROP CONSTRAINT [FK_Categories_Modules]
PRINT(N'Add 14 rows to [dbo].[Categories]')
GO
SET IDENTITY_INSERT [dbo].[Categories] ON
INSERT INTO [dbo].[Categories] ([Category_ID], [Module_ID], [ParentID], [Name], [Title], [Priority], [ThumbnailImage], [Status]) VALUES (1, 1, NULL, 'News', N'اخبار', 1, NULL, 1)
INSERT INTO [dbo].[Categories] ([Category_ID], [Module_ID], [ParentID], [Name], [Title], [Priority], [ThumbnailImage], [Status]) VALUES (2, 2, NULL, 'Article', N'مقالات', 2, NULL, 1)
INSERT INTO [dbo].[Categories] ([Category_ID], [Module_ID], [ParentID], [Name], [Title], [Priority], [ThumbnailImage], [Status]) VALUES (3, 3, NULL, 'Galleries', N'گالری', 3, NULL, 1)
INSERT INTO [dbo].[Categories] ([Category_ID], [Module_ID], [ParentID], [Name], [Title], [Priority], [ThumbnailImage], [Status]) VALUES (4, 1, 1, 'Politics', N'سیاسی', 1, NULL, 1)
INSERT INTO [dbo].[Categories] ([Category_ID], [Module_ID], [ParentID], [Name], [Title], [Priority], [ThumbnailImage], [Status]) VALUES (5, 1, 1, 'Economic', N'اقتصادی', 2, '', 1)
INSERT INTO [dbo].[Categories] ([Category_ID], [Module_ID], [ParentID], [Name], [Title], [Priority], [ThumbnailImage], [Status]) VALUES (6, 1, 4, 'NationalPilitics', N'سیاست داخلی', 1, '', 1)
INSERT INTO [dbo].[Categories] ([Category_ID], [Module_ID], [ParentID], [Name], [Title], [Priority], [ThumbnailImage], [Status]) VALUES (7, 1, 4, 'InternationalPolitics', N'سیاست خارجی', 2, NULL, 1)
INSERT INTO [dbo].[Categories] ([Category_ID], [Module_ID], [ParentID], [Name], [Title], [Priority], [ThumbnailImage], [Status]) VALUES (8, 1, 7, 'Asia', N'آسیا', 1, '', 1)
INSERT INTO [dbo].[Categories] ([Category_ID], [Module_ID], [ParentID], [Name], [Title], [Priority], [ThumbnailImage], [Status]) VALUES (9, 1, 7, 'Europe', N'اروپا', 2, NULL, 1)
INSERT INTO [dbo].[Categories] ([Category_ID], [Module_ID], [ParentID], [Name], [Title], [Priority], [ThumbnailImage], [Status]) VALUES (10, 1, 7, 'Africa', N'آفریقا', 3, NULL, 1)
INSERT INTO [dbo].[Categories] ([Category_ID], [Module_ID], [ParentID], [Name], [Title], [Priority], [ThumbnailImage], [Status]) VALUES (11, 2, 2, 'Scientic', N'علمی', 1, NULL, 1)
INSERT INTO [dbo].[Categories] ([Category_ID], [Module_ID], [ParentID], [Name], [Title], [Priority], [ThumbnailImage], [Status]) VALUES (12, 2, 2, 'Art', N'هنری', 2, NULL, 1)
INSERT INTO [dbo].[Categories] ([Category_ID], [Module_ID], [ParentID], [Name], [Title], [Priority], [ThumbnailImage], [Status]) VALUES (13, 3, 3, 'Culture', N'فرهنگی', 1, NULL, 1)
INSERT INTO [dbo].[Categories] ([Category_ID], [Module_ID], [ParentID], [Name], [Title], [Priority], [ThumbnailImage], [Status]) VALUES (14, 3, 3, 'Religion', N'مذهبی', 2, NULL, 1)
SET IDENTITY_INSERT [dbo].[Categories] OFF
PRINT(N'Add constraints to [dbo].[Categories]')
GO
ALTER TABLE [dbo].[Categories] ADD CONSTRAINT [FK_Categories_Modules] FOREIGN KEY ([Module_ID]) REFERENCES [dbo].[Modules] ([Module_ID])
COMMIT TRANSACTION
GO
Thanks for your help -
Update query for Advanced table.
Hi,
I am an newbie to OAF so need help for a simple task.
I have an advanced table that has been created using expert mode query of VO. (as it contains data from more than one table).
Now, i want to update the data for any row that is changed in the table,
i followed the advanced table example in the tutorial and reached till the update method of AM. Now I am not able to update the table. When I searched the forum it said that I need to have a simple EO on the table to update it, but I want to update more than one table ( foreign key relationship), so can I do it using the same VO ? I have both the VO (one based on custom select query of Expert mode and other normal VO based on EO).
Can someone please give me the query to update the table ?
Thanks,
VKThanks Reetesh for your reply.
As this is a simple task I wan't to do it via OAF query rather than writing PL/SQL procedure.
I have two tables , say error table and interface table, (there is a foreign key relation ship between these tables, ie. i have to show the interface name present in the interface table via the foreign key in the error table). I used the following query to get the data
SELECT xxgblErrorMasterEO1.ERROR_ID_NO,
xxgblErrorMasterEO1.ERROR_CODE,
xxgblErrorMasterEO1.ERROR_MESSAGE,
xxgblErrorMasterEO1.CREATED_BY,
xxgblErrorMasterEO1.CREATION_DATE,
xxgblErrorMasterEO1.LAST_UPDATED_BY,
xxgblErrorMasterEO1.LAST_UPDATE_DATE,
xxgblIntfProgramMaster.INTERFACE_NAME,
xxgblErrorMasterEO1.ERROR_TYPE
FROM XXEEG.XXGBL_ERROR_MASTER xxgblErrorMasterEO1,
XXEEG.XXGBL_INTF_PROGRAM_MASTER xxgblIntfProgramMaster
where xxgblErrorMasterEO1.INTERFACE_ID_NO =
xxgblIntfProgramMaster.INTERFACE_ID_NO
I like the idea of Advanced table while going through the tutorial (example 2) and would want to show certain fields by expanding on the + mark ( just like in the explorer)
now i want to update any of the fields that i show to the user (except the WHO fields). Say for example if the user updates the error_message and Interface_name, so how should i write the update method in the AM ?
Pardon me if this sounds simple :( -
Single Update query for multiple tables
Hiii ....
I want to update Table A and Table B in a single update query can it be possible.
it is something like i have previously done with Mysql.
e.g ..
UPDATE A, B set a.A=1, b.B=X where (id.A= id.B) and id=101.
Is it possible or how can i do it, help me out.sorry, i am posting the mysql example agin, it is something like this
e.g ..
UPDATE A, B set A.a=1, B.b=X where (A.id= B.id) and A.id=101 -
Hi All,
I have table column defined as user defined data type. That User defined data type contains many columns.
My requirement is i want to update one particular column of that User defined data type column.
How should i update.
Pls help me.
I am using Oracle 10g.
I have listed below one table and its associated columns.
PERSON_ID VARCHAR2(20)
PHIN_NO VARCHAR2(20)
SSN_NO VARCHAR2(20)
PERSON_NAME XPN
That XPN data type consists of
FAMILY_NAME FN
GIVEN_NAME VARCHAR2(30)
MIDDLE_NAME VARCHAR2(30)
SUFFIX VARCHAR2(20)
PREFIX VARCHAR2(20)
DEGREE VARCHAR2(6)
For example If i want to update prefix column value. how should i do?
Cheers
Moorthy.GSHi,
In My XPN Object type contains
Structure:-(FAMILY_NAME(FN),GIVEN_NAME,MIDDLE_NAME,SUFFIX,PREFIX,
DEGREE,NAME_TYPE_CODE,NAME_REPRESENTATION_CODE,
NAME_VALIDITY_START_DATE,NAME_VALIDITY_END_DATE,
NAME_ASSEMBLY_ORDER,EFFECT_DATE,EXPIRATION_DATE,
PROFESSIONAL_SUFFIX,NAME_CONTEXT)
Sample Values:- XPN(FN('BALU','','','',''), 'NAVEEN','G','', 'DOM000327','','','','12-JUL-06 11.57.57.854000 AM','12-JUL-06 11.57.57.854000 AM','','12-JUL-06 11.57.57.854000 AM', '12-JUL-06 11.57.57.854000 AM','','')
I want to update the value for Prefix compent, then how should?
Pls help me
Cheers
Moorthy.GS -
Updating model for pivot table in af:iterator
Using Master Detail relationship, i am trying to create multiple forms at runtime. I want to show all the forms at once. Each form has some header fields and a pivot table. Header field is coming from master table and pivot table should be made from child.
I am using af:iterator to iterate over master table rows and show header:
<af:iterator id="i1"
value="#{bindings.MasterTableVO.collectionModel}" var="row"
varStatus="index"> For pivot table, i dragged Child View Object from Data Controls to make pivot table.
<dvt:pivotTable id="pivotTable1"
value="#{bindings.ChildTableVO.pivotTableModel}"
summary="pivot table" sizing="auto"
pivotEnabled="false" drillingEnabled="false"/> Now while iterating, i am not able to get updated model for pivot table. Values from Master table are being updated, but pivot table from child table showing details corresponding to the first row of master table everywhere.
So can you please help me, how to get the updated pivot table model corresponding to the current row in parent iterator ?
I am using JDeveloper 11.1.1.6.0
Thank You.
VSHi Aswini ,
I didnot worked for me. I need to change the usecase a bit..
however you can eaisly display the af:table inside iterator in readonly mode, but when you perform crud operations inline then it gives problems..
Can you explain your usecase.
Regards,
Santosh. -
HOw to improve insert/update/select for nested table.
Hi All,
I think this is my second thread for nested table.
i just want to know what are the different ways available to improve the insert/update/select operation on Nested table.
Thanks in advance.By not using a nested table for data storage in the first place...
http://asktom.oracle.com/pls/apex/f?p=100:11:0::::P11_QUESTION_ID:8135488196597
Perhaps Parallel Query/DML might give some relief. -
Performance of update query for single column vs multiple column
Hi All,
I could not find any answer for this, does it ever matter in terms of performance updating single column versus multiple column in a single update query.
For eg. table consisting of 15 columns, what would be the difference in performance when one column is update in the single query against another update query where 15 columns are updated.
Please do keep in mind my table columns in actually could be around 150+.
Thanks for any information provided.If updated columns aren´t on where clause , then the only impact of 15 columns will be a increase on redo generation, and a possible chainning row.
So since the redo is one of the things that have a large impact, the answer is yes.
The performance will be slower.
Regards
Helio Dias.
http://heliodias.com
OCE SQL, OCP 9i -
Update statement for object table.
Hi,
I have created one type as
Create type test as object(
ins_by varchar2(30),
ins_on date,
upd_by varchar2( 30),
upd_on date);
and then created an object table as
create table imst(
i_code number(5),
i_desc varchar2(35),
i_op test);
now i am able to insert record in this table as
insert into imst values(1,'Hawkins cooker',test(user,sysdate,'',''));
Above works fine.
But I would also like to update the record with i_op.upd_by,i_op.upd_on with some other values.
Can any body help me specifying how to write a plain update statement for the same.
Regards.
SoumenCheck it out:
SQL> Create type myTest as object(
2 ins_by varchar2(30),
3 ins_on date,
4 upd_by varchar2( 30),
5 upd_on date);
6 /
Type created.
SQL> create table imst(
2 i_code number(5),
3 i_desc varchar2(35),
4 i_op myTest);
Table created.
SQL> insert into imst values(1,'Hawkins cooker', mytest(user,sysdate,'',''));
1 row created.
SQL> select * from imst;
I_CODE I_DESC
I_OP(INS_BY, INS_ON, UPD_BY, UPD_ON)
1 Hawkins cooker
MYTEST('APC_LOAD', '12-JUL-04', NULL, NULL)
SQL> update imst i set i.i_op.upd_by = USER, i.i_op.upd_on = add_months(sysdate, 1);
1 row updated.
SQL> select * from imst;
I_CODE I_DESC
I_OP(INS_BY, INS_ON, UPD_BY, UPD_ON)
1 Hawkins cooker
MYTEST('APC_LOAD', '12-JUL-04', 'APC_LOAD', '12-AUG-04')
SQL> Smoke me a kipper I'll be back before breakfast.
Cheers, APC -
SQL Bulk Update using Update query in SQL Table
Hello All,
I want to update data in sql table depends on some condition.
I am getting excel sheet from client and want to change value of field say Status = c.
Client is sending excel sheet with 300 field and want to change value for all 300 records with unique fields (field1 and field2) comming in that excel sheet...
How can i write and update records as Bulk.
Instaed updating one one recors ?
Example ( Update Table_Name Set Status = 'c' Where Field1 = Value from Excel for Field1 and
Field2 = Value from Excel for Field2 )
Same needs to do for 300 records...
Any help will wellcome.
Thanks,
Nilesh....
Thanks and Regards, Nilesh Thakur.you can use OPENROWSET for that
http://www.mssqltips.com/sqlservertip/1540/insert-update-or-delete-data-in-sql-server-from-excel/
Another way is to use SSIS with data flow task having Excel source connecting to excel and using OLEDB command to update rows in table using it. You may also use staging table to get data from excel and later use it inexecute sql task to update your table
to make update set based which would be faster.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Update query for 2 lakhs records
I have 2 tables with 3 common columns (Col1, col2,Primary). One common column name is primary (oracle key word). No indexes are used on these tables. I need to write an update query as shown below.
Emp table
Col1 col2 primay
100 101 y
103 104 n
201 105 y
100 101 y
Dept table
Col1 col2 primay
100 101 null
103 104 null
000 656 null
Update query Result
Col1 col2 primary
100 101 y
103 104 n
Please help me.
ThanksUpdate dept d
set d.primay = (select distinct e.primay from emp e where e.col1 = d.col1 and e.col2 = d.col2);
In emp table there are 100 and 101 with two entries but with same primay value. so to handle such scenarios I have taken distinct iniside select statement.
if you have a case like where in emp table col1 and col2 are same and having different primay table, then obviously you should tell which value should go and update the dept table and based on what logic. -
Hi,
I have this problem, How can query a two table?
Table A -> Table B
id table-a_id
name table_b_name
the relationship is one-to-many
How can I get the result?
Hope my question make sense
cheers.
thanks a lot.I bet you have more luck looking for an answer in a SQL forum.
-
Tuning SQL Query for base tables
Hi,
Can any please help me to tune the below query...... there is full table scan for po_action_history table
SELECT DISTINCT
DECODE(hr.full_name,'Default Buyer, Purchasing','PCH',
'Default Buyer, Travel','TRV',
'Purchase Order, Rapid','RPO',
'Data Interchange, Electronic','EDI',fuser1.user_name) BUYER_ID,
poa.attribute1 BUYER_GROUP,
poa.attribute2 BUYER_SUBGROUP
FROM po.po_action_history ac1,
po.po_headers_all ph,
po.po_agents poa,
hr.per_all_people_f hr,
applsys.fnd_user fuser1
WHERE ph.po_header_id = ac1.object_id
AND ac1.object_type_code = 'PO'
AND ac1.action_code = 'APPROVE'
AND sequence_num =(SELECT MIN(ac2.sequence_num)
FROM po.po_action_history ac2,
applsys.fnd_user fuser2
WHERE ph.po_header_id = ac2.object_id
AND ac2.object_type_code = 'PO'
AND ac2.action_code = 'APPROVE'
AND ac2.last_updated_by = fuser2.user_id)
--AND ac1.last_updated_by = fuser1.user_id
AND ph.agent_id = poa.agent_id
AND ph.agent_id = hr.person_id
AND hr.person_id = fuser1.employee_id
AND hr.effective_end_date > sysdate
AND trunc(ac1.last_update_date) between '01-JAN-08' and '07-JAN-08'
ORDER BY poa.attribute1
Explain Plan
PLAN_TABLE_OUTPUT
Plan hash value: 3325319312
Id Operation Name Rows
Bytes Cost (%CPU) Time
PLAN_TABLE_OUTPUT
| 0 | SELECT STATEMENT | | 27 |
2754 | 38963 (3) | 00:07:48 |
| 1 | SORT UNIQUE | | 27 |
2754 | 38962 (3) | 00:07:48 |
|* 2 | FILTER | | |
| | |
|* 3 | HASH JOIN | | 37 |
3774 | 36308 (3) | 00:07:16 |
PLAN_TABLE_OUTPUT
| 4 | TABLE ACCESS BY INDEX ROWID | FND_USER | 1 |
13 | 2 (0) | 00:00:01 |
| 5 | NESTED LOOPS | | 37 |
3293 | 36303 (3) | 00:07:16 |
| 6 | NESTED LOOPS | | 88 |
6688 | 36180 (3) | 00:07:15 |
| 7 | NESTED LOOPS | | 88 |
PLAN_TABLE_OUTPUT
3960 | 35916 (3) | 00:07:11 |
|* 8 | TABLE ACCESS FULL | PO_ACTION_HISTORY | 2110 |
71740 | 32478 (3) | 00:06:30 |
| 9 | TABLE ACCESS BY INDEX ROWID | PO_HEADERS_ALL | 1 |
11 | 2 (0) | 00:00:01 |
|* 10 | INDEX UNIQUE SCAN | PO_HEADERS_U1 | 1 |
| 1 (0) | 00:00:01 |
PLAN_TABLE_OUTPUT
| 11 | SORT AGGREGATE | | 1 |
36 | | |
| 12 | NESTED LOOPS | | 1 |
36 | 6 (0) | 00:00:01 |
|* 13 | TABLE ACCESS BY INDEX ROWID| PO_ACTION_HISTORY | 1 |
31 | 6 (0) | 00:00:01 |
|* 14 | INDEX RANGE SCAN | PO_ACTION_HISTORY_N1 | 5 |
| 3 (0) | 00:00:01 |
PLAN_TABLE_OUTPUT
|* 15 | INDEX UNIQUE SCAN | FND_USER_U1 | 1 |
5 | 0 (0) | 00:00:01 |
| 16 | TABLE ACCESS BY INDEX ROWID | PER_ALL_PEOPLE_F | 1 |
31 | 3 (0) | 00:00:01 |
|* 17 | INDEX RANGE SCAN | PER_PEOPLE_F_PK | 1 |
| 2 (0) | 00:00:01 |
|* 18 | INDEX RANGE SCAN | FND_USER_N1 | 1 |
PLAN_TABLE_OUTPUT
| 1 (0) | 00:00:01 |
| 19 | TABLE ACCESS FULL | PO_AGENTS | 183 |
2379 | 4 (0) | 00:00:01 |
Predicate Information (identified by operation id):
PLAN_TABLE_OUTPUT
2 - filter(TO_DATE('01-JAN-08')<=TO_DATE('07-JAN-08'))
3 - access("PH"."AGENT_ID"="POA"."AGENT_ID")
8 - filter("AC1"."ACTION_CODE"='APPROVE' AND "AC1"."OBJECT_TYPE_CODE"='PO'AND
TRUNC(INTERNAL_FUNCTION("AC1"."LAST_UPDATE_DATE"))>='01-JAN-08' AND
TRUNC(INTERNAL_FUNCTION("AC1"."LAST_UPDATE_DATE"))<='07-JAN-08')
10 - access("PH"."PO_HEADER_ID"="AC1"."OBJECT_ID")
PLAN_TABLE_OUTPUT
filter("SEQUENCE_NUM"= (SELECT MIN("AC2"."SEQUENCE_NUM") FROM "APPLSYS"."FND_USER"
"FUSER2","PO"."PO_ACTION_HISTORY" "AC2" WHERE "AC2"."OBJECT_ID"=:B1 AND "AC2"."ACTION_CODE"='APPROVE'
AND "AC2"."OBJECT_TYPE_CODE"='PO' AND "AC2"."LAST_UPDATED_BY"="FUSER2"."USER_ID"))
13 - filter("AC2"."ACTION_CODE"='APPROVE' AND "AC2"."OBJECT_TYPE_CODE"='PO')
14 - access("AC2"."OBJECT_ID"=:B1)
PLAN_TABLE_OUTPUT
15 - access("AC2"."LAST_UPDATED_BY"="FUSER2"."USER_ID")
17 - access("PH"."AGENT_ID"="PERSON_ID" AND "EFFECTIVE_END_DATE">SYSDATE@!)
filter("EFFECTIVE_END_DATE">SYSDATE@!)
18 - access("PERSON_ID"="FUSER1"."EMPLOYEE_ID")
ThanksHi,
any help for the above issue. -
AUTOMATIC UPDATE STATISTICS for VB* tables ON automatically
Hello All,
We had reviewed our ECC system with SAP and they recommended us to OFF the AUTOMATIC UPDATE STATISTICS for VBDATA, VBHDR and VBMOD.
We executed the script EXEC sp_autostats <tablename>, 'OFF' but the status goes ON after a while.
Checked the SAP note 771352 but did not get proper idea from it.
MS SQL database used is 2008.
Can someone suggest and share his/her experience.
Regards,
MohitHi Mohit,
Did you ran the sap_z* script ?
What is your SP level - did you check 1702325 - Alerts appear for VB tables
Also, I asked to to use NORECOMPUTE - have you tried that ?
Regards -
Hi i have got this query that is a join of two tables but i need join for three tables i need the extended query
select aauthlname aauthlnam aauthfname aauthfnam aisbn btitle
from ( bsauthors as a inner join bsbook as b on aisbn = bisbn )
into corresponding fields of table books
where aauthlname like authorlname or aauthfname like authorfname
order by aauthlname aauthfname a~isbn.Hi pavan
Plz try the following querry for joins on three tables :
" Customize it to ur requirements and tablenames
Parameters : b type mara-matnr.
select xmatnr xmtart xmatkl ywerks ylgort zmaktx
into corresponding fields of table itab
from ( ( mara as x inner join mard as y on xmatnr = ymatnr )
inner join makt as z on xmatnr = zmatnr ) where x~matnr = a and
y~werks
= b .
Plz see that there is atleast one field common between the three tables u want to use.
Regards
Pankaj
Maybe you are looking for
-
Cash Journal table to find out day wise closing balance
Can I have the table name to find the day wise closing balance of cash journal tried with CJAMOUNT, but not ........
-
Hello Experts, I was wondering as to how to display User defaults for all users in their request page i.e.so that they can make changes as needed for their id. I tried following pg 176-182 in config guide but it is not showing anything in any user re
-
The issue im facing is on my classic every album named The ..... for example the best ep the album will be listed under B and its only happening for the albums with The infront what can i do about the issue
-
PSE9: Why is the Automate/Automation Tools greyed out? Driving me crazy!
I am trying to install Scripts-thought I was doing it right but still can't run them because the Automate bar is grey.
-
What does the WPA WEP look like, how do I find it ?
I'm told what a WPA/ WEP means when I google it, but I don't know where to find it or what it looks like ???