Update Reader 11.0.03

Hello,
we deploy Adobe Reader on approx. 60 Clients and 18 Terminalservers through GPO. This worked fine since version 10.x.
Today I was downloading AdbeRdrUpd11003.msp and try to slipstream it into our 11.0.2 AIP. It failed stating "Another version of this product is already installed..."
I was using msiexec /a <path2msi> /p <path2msp> like i did many times before.
Lastly i was able to sucesssfully slipstream the 11.0.03-msp into a newly created AIP with 11.0.0.
However, I cannot install it on any Client. The installation abort with "Another version of this product...". In the logfile i found Errorcode 1638 which does just mean the same.
Does anyone know whats the cause of this behavior resp. what i have to look for?
Thanks in advance
H.

Same problem here.
i guess we have to de- and install., if Adobe does not come up with a fixed file.
Thanks for triing every version, i did only try till 11.0.01 and then went looking for a thread ,-).
Productcode and PatchFamily of the MUIs seems to be ok,
i really got no clue why it does not work.
(AC76BA867AD7FFFF7B44AB0000000001)

Similar Messages

How to get reading list in my all my devices and computer (window 7). i have installed ios 6 on iphone and icloud control panel on both PC's (home and office) but i dont get updated reading list on all my devices.

how to get reading list in my all my devices and computer (window 7). i have installed ios 6 on iphone and icloud control panel on both PC's (home and office) but i dont get updated reading list on all my devices.

Hi bluegrandpanash,
Thanks for visiting Apple Support Communities.
If you backed up your iPhone to iCloud before updating the software, first try the steps under "Restore from an iCloud backup" in this article to recover your data:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Best Regards,
Jeremy

Can't update reader 9. win 7 os. says invalid drive D

cant update reader 9. win 7 os. says invalid drive d. want to read pdfs from the web

Hi iceman1948,
Welcome to the Community!
Follow the steps mentioned in http://helpx.adobe.com/creative-suite/kb/install-error-1327-invalid-drive.html
Thanks!
Ankit

Did you get error 1067 when updating Reader?

If you got update error 1067 when updating Reader, I'd like to hear more so we can find a solution.
What OS are you using and what version (such as Window XP SP2)?
What version of Reader do you have?
What was the error message you got?
How much disk space do you have available?
How much memory (RAM) is on your system?
I recommend you try installing again using the direct download link noted in this document under "Try a different download link":
http://kb2.adobe.com/cps/836/cpsid_83641.html#main_Try_a_different_download_link
Please let me know if this helps. We haven't been able to reproduce this error.
Thanks so much!

I just worked through this error on my Dad's computer. He has XP Home SP 3, Adobe Acrobat 4 and Reader 9.4.7 were already installed. He has been getting to 1067 error for some time and just clicking through it. I manually un-installed Acrobat 4, but left the shared files in web/common alone. I did not touch Reader 9.4.7. I downloaded the alternate installer for Adobe 10.1.2 for English and ran it. It did complain, eventually, about 9.4.7 still having a file in use, but I'd left the previous dialog from the 9.4.7 updater failure open. I closed that 9.4.7 failure dialog and hit 'retry', and the installer proceeded onward and seems to have completed successfully.
This machine has 1 gig of RAM and approx 4G of free disk space on C:.

Can't update reader - files in use by adobe 8.1

I have tried to update to adobe reader x as I cannot view some things online. My computer runs Vista.
Error message comes up during installation: Files in use by Adobe 8.1, close these then retry. Adobe 8.1 has been deleted from the computer using uninstall and manual deletion. Still same error message.
Using the troubleshooting guide, I tried to delete Adobe 8.1 manually. I tried to delete the files AcroIEHelper.dll, AcroPDF.dll and pdfshell.dll from my computer using command prompt, but computer says access denied. When I try to remove them just by deleting them out of program files, computer says I do not have permission (although I am administrator).
Any ideas???
Thank You

It means something else on your computer is working with your ipod. Make sure nothing else on your computer is open, and then open i-tunes only, and connect ipod to update.

I received a pdf from someone with an updated reader. I am not able to open the file or download the update. ERROR 1932 ????

I received a pdf from someone with an updated reader. I am not able to open the file or download the update. ERROR 1932 ????

ERROR 1935 SORRY PLEASE HELP I CANNOT OPEN ANY PDF'S ON MY COMPUTER NOW????????????????

Can't open PDFs, Initially received runtime error,updated Reader - new error Adobe Reader has stopped working, uninstalled re-installed same error message Adobe Reader has stopped working

Can't open PDFs, Initially received runtime error,updated Reader - new error Adobe Reader has stopped working, uninstalled re-installed same error message Adobe Reader has stopped working

Assuming that you are in Win (which you haven't said), you can try using this tool to first remove all traces of previous versions of Reader:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
and run it immediately after restarting your computer.

Updated reader to version 11.0.7.79, now all I am getting are gray screens. How do I fix this?

I am using Firefox 29.0.1 browser, and Windows 7 Home Premium. After updating Reader to the latest version, (11.0.7.79), any pdf page I have tried to view, has controls,(buttons) for various actions (on the page border), and THAT PART of the page is normal, but the entire VIEWING screen is gray, and nothing ever loads. This did not ever happen until I updated Reader from version 10. How can I repair this?

You do use the Adobe Reader plugin, not the Firefox PDF viewer? See http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html
If you use indeed the Adobe plugin, I would check your graphics driver: http://forums.adobe.com/thread/945765

Adobe Updater Wants To Update Reader 9 Which I Don't Have

The Adobe updater program on my Mac keeps up popping up asking me to update Reader v9 which I do not have any longer as I am running the latest version of Reader. How do I get rid of this annoying reminder? I don't want to turn off auto update checking since that will affect my current installed Reader. I'm running on OS X 10.6.

Hii
Thanks for the quick response, but it didn't solve the problem
Do you have more things that I could try ?
Thanks for the effort

Stopping Desktop ICON when Updating reader

Every time I Update Reader, it installs a desktop icon for reader. There doesn't appear to be an option to avoid that. I must drag it to the Recycle Bin every time and that is annoying. If I allowed every application on my computer to put an icon on the desktop, I'd need to scroll the desktop to find all of them. That would make the desktop less than useful. So could someone get to Adobe and suggest that they stop automatically putting an icon to reader on my desktop each time they release an upgrade? Besides, when does anyone ever launch the reader that way? I always double-click a PDF file and the reader opens. Who needs the icon?
Another issue is the installation of scripts (or apps) that run at startup. Again, if every program on my PC did that, I could go buy my groceries while the computer was booting. Fortunately, I have a program that watches for those startup applications and gives the option to allow or disallow the registry change. I usually disallow them for the reason stated. Unless these startup routines are absolutely essential in order for Adobe Reader to run, they should be made optional. I only have 1.5 GB of RAM and that could get filled just with resident apps loaded at boot time. As it is, over half of that memory space is gone by the time the operating system is fully loaded, including the various resident programs loaded by each of my applications.
Does anyone have any ideas as to how to stop this gluttony?
Koi Guy

Koi Guy wrote:
So could someone get to Adobe and suggest that they stop automatically putting an icon to reader on my desktop each time they release an upgrade?
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=49

Gmail on Pre does not update read items automatically when reading them from a computer. (this might be more of a suggestion than a problem)

Basically I got Gmail on my Pre set to push emails as they arrive, I also have Exchange setup the same way.
Now lets say I look at my email screen on the Pre and it shows me I got 3 new gmails and 3 new exchange emails. But rather than jumping on the Pre to check them, I get on my desktop computer instead. I go open up gmail, read all the emails, and gmail on my computer now shows I have 0 new messages. I do the same for Exchange.
Now I go back on my Pre to see what it says. It says I have no new Exchange emails, but still shows 3 new gmails. I even open up gmail on the Pre and the 'new' email number in the right hand corner does its little animation like its updating itself, but it still says 3 and I have 3 emails bolded. And the Pre seems to continue to tell me I have 3 new emails until I manually hit the refresh/sync button in the lower right hand corner.
Bascially I would like the gmail to act the same as exchange and update read emails instantaneosuly. Also it would be nice if Palm could work in a feature where if I did read the emails on a device other than the Pre, the little icon notifications would go away too.
Post relates to: Pre p100eww (Sprint)

Okey I think I have found a solution for this problem. I have Pre plus (AT&T) and faced the same issue as you. Mail was not getting updated as read when I already read it using outlook on my computer.
Upon looking at the SMTP setting on Pre I see that by default its security is SSL and port is 465. I just changed the port to 587 and now it works as it should be
Try this trick and let us know...

Updated Reader X now OpenFile extension won't open protected pdf's

A week ago I was able to open some pdf's that are protected with the OpenFile extension. I updated Reader X and Acrobat Professional X the other day now I get an error message when trying to open those files.
"There was an error contacting the server or the server's response could not be decoded. Pelase check your Internet Connecton".
I've tried everything I can think of, including re installing the OpenFile extension and I continue to get this error. Any ideas on what I can do to fix this. Thanks.
Christian

You may contact the support of FileOpen.

Latest update reader installed today (8/13/14) 11.0.08 but certificate expired 7/25/14. Is it okay and safe? Previously, unmarked for discussion.

Latest update reader installed today (8/13/14) 11.0.08 but certificate expired 7/25/14. Is it okay and safe? Previously, not marked for discussion.

Hi jimya,
Which certificate are you referring to here?
Yes Reader update v11.0.08 is safe to install.
Regards,
Rave

Key flexfield - protecting one of the segment as NON-UPDATABLE/ READ-ONLY

Key Flexfield setup for "People Group Flexfield" consists of seeg1,seg2,seg3,seg4.
We would like to make Seg1 of this flexfield "READ ONLY" / "DISPLAY ONLY" / "Non-Updatable".
Please advise possible way of making this functionality.
I have tried, following but no luck :
1) Limitations of Forms Personalization [ID 420518.1]
Forms Personalization is not possible for any key flexfield structure or segments.
This is a limitation of Forms Personalization on Flexfield. There was an enhancement request Bug 5506506 - "PERSONALIZE FLEXFIELDS BY USING FORMS PERSONALIZATION" but it was rejected the enhancement request as this is not feasible. A Flexfield is a single field in a form but then when you click into it and it opens up the flexfields window, the multiple fields you see is actually a user exit with multi segment values, not form fields. No Form Personalization events are passed to flexfield windows (user exits). No Form Personalization events are passed to segments inside the flexfield window (user exit).
2) Key Flexfield Security Rules Enabled
Defining security rules on any segment in key flexfield makes all segments as read only. Per Oracle Document:"Defining security rule on key flexfield combination on one or more segments allows all segments to be not updatable"

In SSHR, I believe it is possible although I have not done it before, I have spoken to people who have.
You need to have access to jDeveloper and be able to open up the SSHR page in question. Find the internal ID of the flex item within the SSHR page in question.
Then you create a new item in personalization and set that new item to have the same ID as you retrieved from jDeveloper. Make that item read only and configured the 'default' flex to not show the segment in question.
That is basically the way this can be achieved but it is not straightforward and requires a cursory understanding of OAF.
I do not know if it is possible to do this in the PUI. Would be interested to know requirement behind essentially showing a static read only field in a professional form - can the admins not be trusted to leave it alone? One workaround would be coding a user hook or custom library to error if that field is updated. Not read only but would stop those pesky Administrators meddling with it!

Error 1327 Installing/Updating Reader

When attempting to update Adobe Reader it comes up with an error "Error 1327.Invalid Drive H:\". I run into the same thing attempting to install the latest version using the full installer.
H: is mapped to a user folder on the network. The My Documents folder is pointed to "H:\My Documents" and is ONLINE. The Adobe help page says the error occurs if the drive is unavailable but it is not, I have full access.
It mentions setting permissions on the folder for "Everyone" but this is the most insecure thing I have ever heard. These are user's directories on a Windows server, we cannot just set permissions to Everyone.
Please advise.
Thanks.

Can you please try running the EXE installer as the administrator (Right click > Run as Administrator) and see if the error is still displayed.
Also, can you try out the following command on your command prompt and post back the result:
echo %userprofile%
If this displays the correct path i.e. H:\...., then you can go ahead and try out the changes as per the suggestion by "Shashi.kant"; since all you would be doing, would be replacing the full path of the userprofile (H:\....) with the corresponding environment variable i.e. %userprofile%
Ankit

Fails trying to update Reader 9.1.3 with 9.0 language support.

I have upgraded my reader to 9.1.3, selected my language "english", and ran the upgrade program. The update program says I need to install Adobe Reader 9.0 Language Support. When I try to do this, the error message is "Adobe Reader 9.0 Language Support failed to install". I have tried this with a very limited protection (ie virus detection) and with no protection. Same result. When I search the updates URL, there is no Adobe Reader 9.0 Language Support. I did install the Adobe Reader 9.1.3 Multiple Language Support (at least I downloaded and ran the program). Is this enough?

Thank you for the response, and sorry it took so long to respond in my own thread.
I tried using the Windows Installer Cleanup Utility, but it still doesn't work. I opened up Registry Editor, and browsed to the key it said was missing. It doesn't look like I have that key - the only thing in there is something that says (default) in the name column, type is REG_SZ, and under data it says (value not set). I have no idea what any of this means, and I'm also not sure how to see what permissions I have. Can you make any sense of this?

Update Reader 11.0.03

Similar Messages

Maybe you are looking for