Update record failed with "SPOC 003: Error in spool C call: Error from TemS
Guys
I have 4.7 production system with 4 dialog instance
The logon groups are configured .
For 1 of the application server ,when user does any PO or GR ,update fails with above message
The spool is configured to stored on file . SM21 says read /write problem on /globle/100SPOOL
But all is very good .sidadm has all read,write permission on this
More it also shows "Operating system call gethostbyname failed "
Please help me to solve this
Thanks a ton in advance
-Ganesh
Hi Thomas
Thanks
I checked on this and all works fine
Also we use NIS services to maintain all this
Our Unix team says NIS ,host and all works very fine
Please suggest as update stuck is causing many problems . Temporarily we have removed this perticular instance from logon group so that no user will log on to this
Thanks in advance guys
-Ganesh
Similar Messages
-
Smartform Printing : Error in spool C call: Error from TemSe
Hi! everybody,
I am stating my problem as follows : I have to print a bar-code sticker of size 10 X 7 cms. I have worked on bar-codes before this also. This time the output from a smartform is to be given to a ZEBRA TLP 2844 printer. I initially encountered problems in printing. The data does not fit on to the page.
After a lot of searching I found that ZEBRA was a partner of SAP and that a special device type needs to be created for output from a ZEBRA printer. I did this two times. Each time my steps were as described under.
To create the device type I did the following :
1. I finally found the driver from the ZEBRA website from http://www.zebra.com/id/products/global/en/utilities/sap_device_types.UtilityFile.File.tmp/Zebra_SAP_Device_Types.zip From this I uploaded the driver for 203 DPI zebra printer with IBM code 850 font file name "YZB200.PRI" into the transaction SA38.
2. Then I created a new device ZEB10 in SPAD after assigning my format to the device.
Thereafter, I tried to print my sticker. During this procedure, on selection of the new device type, the fonts automatically changed to ARIAL in the print preview. When I give the print command (Spool request : Print immed = X, Delete after output = X & New spool request = X) it gives an error message Error in spool C call: Error from TemSe.
Since the output had not been issued, I opened the spool request to view its TemSe characteristics. Here I found
Spool Attributes
Output Device ZEB10
Format ZTT Format
Doc. Category SMART
Recipient
Department
Deleted On 19.01.2011
Authorization
Output Attributes
No. of Copies 1
Priority 5
SAP Cover Page Do not print SAP cover page
OS Cover Sheet Print as set at printer
Requested 0
Processed 0 With Problem 0
With Error (Not Printed) 0
Storage Mode Print
TemSe Attributes
Object name SPOOL0000013836
Data type ????????????
Character set 0 -
> Character set of dev type = 1162
Number of parts 0
Record format
Size in bytes 0
Storage location
On seeing SP01
Spool no. Type Date Time Status Pages Title
13836 Smartforms(OTF) 11.01.2011 07:32 + 0 SMART LP01 USERID
I hope this data helps you help me. Please ask for more data if you wish. Also, I have searched vastly for this error on the net have already come across the link http://help.sap.com/saphelp_45b/helpdata/en/d9/4a8f9c51ea11d189570000e829fbbd/frameset.htm but to no use. On the SDN, I have not found a similar thread and that is why I decided to post this problem here, hoping to find a solution. Kindly help.
Regards,
ManasHi Manas,
I am facing the same issue for one of my clients.
Can you please share the solution with me if you have come out with it.
Regards,
Nirmal.K -
Spool Error: "Error in spool C call: Error from TemSe"
Hi All,
We are getting the above error in F110 transaction. Even though the line items are clearing. But, cheque numbers are not updating and spool also not creating.
Please suggest me, what i have to do for this.
Thanks in Advance,
Krishna.Hi Manas,
I am facing the same issue for one of my clients.
Can you please share the solution with me if you have come out with it.
Regards,
Nirmal.K -
Windows update KB3000850 fails with error: 0x800700a1
Windows update KB3000850 fails with the following error: 0x800700a1
In WindowsUpdate.log there is the following:
FATAL: CBS called Error with 0x800700a1
In CBS.log there is the following error:
2014-11-25 11:17:54, Error CSI 00000ea8 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #11395486# from Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile(flags = 0, handle = {provider=NULL, handle=0, name= ("null")}, da = (SYNCHRONIZE|FILE_WRITE_ATTRIBUTES), oa = @0xa81c89d2f0->OBJECT_ATTRIBUTES {s:48; rd:NULL; on:[9]"MSDTC.LOG"; a:(OBJ_CASE_INSENSITIVE)}, iosb = @0xa81c89d398, as = (null), fa = (FILE_ATTRIBUTE_NORMAL), sa = (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE), cd = FILE_OPEN, co = (FILE_NON_DIRECTORY_FILE|FILE_SYNCHRONOUS_IO_NONALERT|0x00004000), eab = NULL, eal = 0, disp = Invalid)[gle=0xd000003b]2014-11-25 11:17:54, Error CSI 00000ea9@2014/11/25:11:17:54.259 (F) base\wcp\sil\merged\ntu\ntsystem.cpp(2155): Error STATUS_OBJECT_PATH_SYNTAX_BAD originated in function Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile expression: (null)[gle=0x80004005]Tried all the suggestions in that thread, including running the DSIM tool.
Still getting the same error: 800700a1
I've uploaded the complete logs here: https://mega.co.nz/#F!wpZCHQRB!1GI7_PRJ3_S2nwITYVxDsg
This is a bigger snip from CBS.log around the errors:
2014-11-26 16:28:39, Info CSI 00000458 'From' Namespace [wcm://Microsoft-Windows-IPMIProvider?version=6.3.9600.16384&language=neutral&processorArchitecture=x86&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers] not found, servicing aborted, reverting to Install of 'To'
2014-11-26 16:28:39, Info CSI 00000459 Processing Namespace [wcm://Microsoft-Windows-IPMIProvider?version=6.3.9600.17415&language=neutral&processorArchitecture=x86&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers]
2014-11-26 16:28:39, Info CSI 0000045a done
2014-11-26 16:28:39, Info CSI 00000e98 Regenerating payload files from delta files on component: [ml:280{140},l:186{93}]"amd64_microsoft-windows-com-dtc-runtime_31bf3856ad364e35_6.3.9600.16384_none_0a1162f033fa01f6"
2014-11-26 16:28:39, Info CSI 00000e99 Creating NT transaction (seq 2), objectname [6]"(null)"
2014-11-26 16:28:39, Info CSI 00000e9a Created NT transaction (seq 2) result 0x00000000, handle @0xf7c
2014-11-26 16:28:39, Error CSI 00000e9b (F) STATUS_OBJECT_PATH_SYNTAX_BAD #8867646# from Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile(flags = 0, handle = {provider=NULL, handle=0, name= ("null")}, da = (SYNCHRONIZE|FILE_WRITE_ATTRIBUTES), oa = @0xa2a758d410->OBJECT_ATTRIBUTES {s:48; rd:NULL; on:[9]"MSDTC.LOG"; a:(OBJ_CASE_INSENSITIVE)}, iosb = @0xa2a758d4b8, as = (null), fa = (FILE_ATTRIBUTE_NORMAL), sa = (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE), cd = FILE_OPEN, co = (FILE_NON_DIRECTORY_FILE|FILE_SYNCHRONOUS_IO_NONALERT|0x00004000), eab = NULL, eal = 0, disp = Invalid)
[gle=0xd000003b]
2014-11-26 16:28:39, Error CSI 00000e9c@2014/11/26:16:28:39.304 (F) base\wcp\sil\merged\ntu\ntsystem.cpp(2155): Error STATUS_OBJECT_PATH_SYNTAX_BAD originated in function Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile expression: (null)
[gle=0x80004005]
2014-11-26 16:28:39, Info CBS Added C:\WINDOWS\Logs\CBS\CBS.log to WER report.
2014-11-26 16:28:39, Info CBS Added C:\WINDOWS\Logs\CBS\CbsPersist_20141126162432.log to WER report.
2014-11-26 16:28:39, Info CBS Added C:\WINDOWS\Logs\CBS\CbsPersist_20141120100026.cab to WER report.
2014-11-26 16:28:39, Info CBS Added C:\WINDOWS\Logs\CBS\CbsPersist_20141028123021.cab to WER report.
2014-11-26 16:28:39, Info CBS Not able to add pending.xml to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-11-26 16:28:39, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-11-26 16:28:39, Info CBS Not able to add SCM.EVM to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-11-26 16:28:39, Error CSI 00000e9d (F) STATUS_OBJECT_PATH_SYNTAX_BAD #8867645# from Windows::Rtl::SystemImplementation::CSystemIsolationLayer_IRtlSystemIsolationLayerTearoff::TransferFile(flags = (ReplaceIfExists|OpenForBackupIntent), op = [8]"HardLink", odir = NULL, oname = [l:18{9}]"MSDTC.LOG", ndir = @0xa29be2af38, nname = [l:18{9}]"MSDTC.LOG", disp = (null))
[gle=0xd000003b]
2014-11-26 16:28:39, Error CSI 00000e9e (F) STATUS_OBJECT_PATH_SYNTAX_BAD #8867523# from CFileInstaller::DoComponentOperation(...)[gle=0xd000003b]
2014-11-26 16:28:39, Error CSI 00000e9f (F) STATUS_OBJECT_PATH_SYNTAX_BAD #8867522# from CFileInstaller::ProcessComponentChange(...)[gle=0xd000003b]
2014-11-26 16:28:39, Error CSI 00000ea0 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #8867521# from PrimitiveInstaller::CCoordinator::ProcessChange(Change 6.3.9600.16384 -> 6.3.9600.17415 for Microsoft-Windows-COM-DTC-Runtime, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral)[gle=0xd000003b]
2014-11-26 16:28:39, Info CSI 0000045b SMI Primitive Installer [done]
2014-11-26 16:28:40, Error CSI 00000ea1 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #4347192# from CCSDirectTransaction::PerformChangeAnalysis(...)[gle=0xd000003b]
2014-11-26 16:28:40, Error CSI 00000ea2 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #4347191# from CCSDirectTransaction::PrepareForCommit(...)[gle=0xd000003b]
2014-11-26 16:28:40, Error CSI 00000ea3 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #4347190# from CCSDirectTransaction::ExamineTransaction(...)[gle=0xd000003b]
2014-11-26 16:28:40, Error CSI 00000ea4 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #4347189# from CCSDirectTransaction_IRtlTransaction::ExamineTransaction(...)[gle=0xd000003b]
2014-11-26 16:28:40, Info CSI 0000045c SMI Primitive Installer [started]
2014-11-26 16:28:40, Info CSI 0000045d 'From' Namespace [wcm://Microsoft-Windows-Installer-Engine?version=6.3.9600.17399&language=neutral&processorArchitecture=wow64&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers] not found, servicing aborted, reverting to Install of 'To'
2014-11-26 16:28:40, Info CSI 0000045e Processing Namespace [wcm://Microsoft-Windows-Installer-Engine?version=6.3.9600.17415&language=neutral&processorArchitecture=wow64&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers]
2014-11-26 16:28:40, Info CSI 0000045f done
2014-11-26 16:28:40, Info CSI 00000460 'From' Namespace [wcm://Microsoft.Windows.WinHTTP?version=5.1.9600.16384&language=neutral&processorArchitecture=wow64&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers] not found, servicing aborted, reverting to Install of 'To'
2014-11-26 16:28:40, Info CSI 00000461 Processing Namespace [wcm://Microsoft.Windows.WinHTTP?version=5.1.9600.17415&language=neutral&processorArchitecture=wow64&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers]
2014-11-26 16:28:40, Info CSI 00000462 done
Is this the root cause?
2014-11-26 16:28:39, Info CSI 00000e99 Creating NT transaction (seq 2), objectname [6]"(null)"
Is there supposed to be a "null" going into whatever that is? -
Updating Address Fails With APP-PER-52473
Updating Address Fails With APP-PER-52473 "You must enter a secondary address dated later than the primary address."
I have an issue w/ updating addresses. The form throws the PER-52473 error. The thing is- my client never assigned primary addresses in the system. Thus, we need to update the data accordingly. I have about 4 addresses per person. From metalink, I assumed all I needed to do was to end-date 3 of them, and flag one as PRIMARY. This still fails. Maybe I am missing something? Is there another step? Another table?
My question- how do I make this error go away. I have been playing around with end-dates and primary flags, over lapping and non-overlapping dates, and no luck. Any assistance would be great. Thanks.
ADDRESS_ID BUSINESS_GROUP_ID DATE_FROM DATE_TO PRIMARY_FLAG STYLE
11968417 101 11-MAR-09 null Y 10
11968419 101 15-JUL-08 10-MAR-09 N 10
11968420 101 13-JUL-08 14-JUL-08 N 10
11968421 101 11-JUL-08 12-JUL-08 N 10Looks like a bug.
Per_Addreses is a Dated table and not a date-track table.
So you can still have -
11968417 101 11-MAR-09 null N 10
11968419 101 15-JUL-08 null N 10
11968420 101 13-JUL-08 null N 10
11968421 101 11-JUL-08 null Y 10
Why can't you create your latest address(primary) also effective employee start_date ?
As of system date your primary will be the one you can refer in reports/processes. So there will be no harm.
Where exactly are you using the addresses ?
Can you not have overlapping addresses ?
cheers,
Vignesh -
Cumulative Update 3 client update install failed with code 1642
We have SCCM 2012 R2 and recently updated to CU3
Existing client is version 5.00.7958.1000
Pushing update package created during CU3 update failing on some computers
I am trying to update some of laptops using CU3 x86 update and getting following errors
Script for Package:ABC00126, Program: Cumulative update 3 - x86 client update install failed with exit code 1642
I have reviewed many forms but couldn't find relevant.
Update works on about 70% on machines with same image but failed on rest with same 1642 error
Same issues occurs applying client on during TSequence on some of machines.
It is very inconsistent,
Any help would be greatly apprciated
Thanks
RJ
RJ09I verified package does copied over in ccmcache folder.
Also try to run update package using pstools, got error same as Torsten mentioned.
Here are logs from client.
Checking content location C:\Windows\ccmcache\gt for use
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Successfully selected content location C:\Windows\ccmcache\gt
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Executing program as a script execmgr
13/01/2015 6:56:04 PM 2588 (0x0A1C)
Found executable file msiexec.exe with complete path C:\Windows\system32\msiexec.exe
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Successfully prepared command line "C:\Windows\system32\msiexec.exe" /p configmgr2012ac-r2-kb2994331-i386.msp /L*v C:\Windows\TEMP\configmgr2012ac-r2-kb2994331-i386.msp.LOG /q REINSTALL=ALL REINSTALLMODE=mous
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Command line = "C:\Windows\system32\msiexec.exe" /p configmgr2012ac-r2-kb2994331-i386.msp /L*v C:\Windows\TEMP\configmgr2012ac-r2-kb2994331-i386.msp.LOG /q REINSTALL=ALL REINSTALLMODE=mous, Working Directory = C:\Windows\ccmcache\gt\
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Created Process for the passed command line
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramStartedEvent
AdvertisementId = "ABC212D1";
ClientID = "GUID:f298da2e-dfd1-428e-8b3c-b03602f95719";
CommandLine = "\"C:\\Windows\\system32\\msiexec.exe\" /p configmgr2012ac-r2-kb2994331-i386.msp /L*v C:\\Windows\\TEMP\\configmgr2012ac-r2-kb2994331-i386.msp.LOG /q REINSTALL=ALL REINSTALLMODE=mous";
DateTime = "20150114005604.541000+000";
MachineName = "DH-07";
PackageName = "ABC00126";
ProcessID = 3496;
ProgramName = "Cumulative update 3 - x86 client update install";
SiteCode = "abc";
ThreadID = 2588;
UserContext = "NT AUTHORITY\\SYSTEM";
WorkingDirectory = "C:\\Windows\\ccmcache\\gt\\";
execmgr
13/01/2015 6:56:04 PM 2588 (0x0A1C)
Raised Program Started Event for Ad:ABC212D1, Package:ABC00126, Program: Cumulative update 3 - x86 client update install
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="ABC00126",ProgramID="Cumulative update 3 - x86 client update install", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="ABC00126",ProgramID="Cumulative update 3 - x86 client update install", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
MTC task with id {8EB498C5-71D5-4933-BA80-6EEB8E189F98}, changed state from 4 to 5
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Program exit code 1642 execmgr
13/01/2015 6:56:04 PM 2784 (0x0AE0)
Could some please review and advise..
Thanks
RJ09 -
Windows Update KB2926765 fails with error code 8024200D.
Note: it was recommended that I post this to TechNet. It was originally posted at http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/vista-update-bug/ed9baacd-edd3-449f-b679-8f71614f3a15?msgId=ca75efe9-beea-41e9-afda-7ffe15f9b0f3.
Windows Update KB2926765 keeps failing to install. The error code is 8024200D.
I've run sfc /scannow with no errors.
I used the System File Checker tool http://support.microsoft.com/kb/929833/en-us.
I ran the System Update Readiness tool. http://www.microsoft.com/en-us/download/confirmation.aspx?id=1540
The update still failed to install.
I've also run the MGADiag tool and the Microsoft FixIt windows update (wu) tool.
I then downloaded the update from the Microsoft Update Catalog http://catalog.update.microsoft.com/v7/site/Home.aspx
and copied it to the Windows\CheckSUR\packages folder (after creating the "packages" folder) , and ran the Readiness tool again.
The update failed to install.
I ran the readiness tool again. This time the readiness tool found no errors.
=================================
Checking System Update Readiness.
Binary Version 6.0.6002.23186
Package Version 24.0
2014-06-14 15:33
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 2169
No errors detected
Checking CoreOS key for repairing corruptions.
Winner version: 6.0.6002.18971.
Processor architecture: x86.
Check key to be repaired: wcm://Microsoft-Windows-CoreOS?version=6.0.6002.18971&language=neutral&processorArchitecture=x86&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers\metadata\elements\ComputerName
Recreated value: @_type.
Recreated value: @dataOnly.
Recreated value: @default.
Recreated value: @description.
Recreated value: @displayName.
Recreated value: @handler.
Recreated value: @legacyName.
Recreated value: @legacyType.
Recreated value: @migrate.
Recreated value: @scope.
Recreated value: @xsd:type.
=======================================
The update still fails to install.
I also recently ran the "automatic troubleshooter" MicrosoftFixit.wu.LB.236326420485116200.3.1.Run.exe and still have the problem.
We're using Windows Vista Business SP2 32 bit upgraded from XP. Antivirus - Bitdefender up to date. Previous antivirus - Avira Antivir and AVG. Firewall - Online Armor. The last successful update installation was Security Update for Office 2003 (KB2726929).
It and other updates have installed successfully (after the KB2926765 failure) and KB2926765 keeps failing.
Thanks.Go through the following thread:
Windows Update Error Code 8024200D
You may create another user account with administrative privileges and recheck the issue.
S.Sengupta, Windows Entertainment and Connected Home MVP -
Windows 7 update KB2868626 fails with error ERROR_ACCESS_DENIED (0x8007005)
Hi,
I can't install Windows Update KB2868626 on my Windows 7 Enterprise PC. I've searched but found nothing that could help me, it keeps installing, and revering changes when rebooting.
Here you can find an extract form my CBS.log file, the link to the whole file: https://skydrive.live.com/redir?resid=D3508B4B962EDB24!107&authkey=!AFy6TDqI3l2nXkc&ithint=file%2c.zip
2014-02-17 14:53:06, Error CSI 00000001 (F) Logged @2014/2/17:13:53:06.853 : [ml:288{144},l:286{143}]"events installer: online=1, install=1,
component=x86_Microsoft-Windows-CAPI2-instrumentation_31bf3856ad364e35_6.1.7601.18277_neutral_release__."
[gle=0x80004005]
2014-02-17 14:53:06, Error CSI 00000002 (F) Logged @2014/2/17:13:53:06.931 : [ml:170{85},l:168{84}]"WmiCmiPlugin wevtcfg.cpp(2219): InstrumentationManifestAssert
failed. HR=0x80070005."
[gle=0x80004005]
2014-02-17 14:53:06, Error CSI 00000003 (F) Logged @2014/2/17:13:53:06.931 : [ml:166{83},l:164{82}]"WmiCmiPlugin eventloghandler.cpp(192):
ProcessEventsInstall failed. HR=0x80070005."
[gle=0x80004005]
2014-02-17 14:53:06, Error CSI 00000004 (F) Logged @2014/2/17:13:53:06.931 : [ml:170{85},l:168{84}]"WmiCmiPlugin eventloghandler.cpp(212):
EventLogHandlerInstall failed. HR=0x80070005."
[gle=0x80004005]
2014-02-17 14:53:06, Error CSI 00000005 @2014/2/17:13:53:06.931 (F) CMIADAPTER: Inner Error Message from AI HRESULT = HRESULT_FROM_WIN32(ERROR_ACCESS_DENIED)
[18]"Acceso denegado.
[gle=0x80004005]
2014-02-17 14:53:06, Error CSI 00000006@2014/2/17:13:53:06.931 (F) CMIADAPTER: AI failed. HRESULT = HRESULT_FROM_WIN32(ERROR_ACCESS_DENIED)
Element:
[18295]"<events xmlns="http://schemas.microsoft.com/win/2004/08/events">
<provider guid="{5bbca4a8-b209-48dc-a8c7-b23d3e5216fb}" message="$(string.MSServicingProviderName)" messageFileName="%SystemRoot%\System32\crypt32.dll" name="Microsoft-Windows-CAPI2" resourceFileName="%SystemRoot%\System32\crypt32.dll"
symbol="CAPI2_PROVIDER">
<channels>
<importChannel chid="Application" name="Application" />
<channel access="O:BAG:SYD:(A;;0x7;;;BA)(A;;0x2;;;AU)" chid="OpCh" message="$(string.OperationalChannel.Name)" name="Microsoft-Windows-CAPI2/Operational" type="Operational"
/>
</channels>
<keywords>
<keyword mask="0x00001" message="$(string.PathValidation.KeywordMessage)" name="PathValidation" symbol="CAPI2_PATH_VALIDATION_KEYWORD" />
<keyword mask="0x00002" message="$(string.PathDiscovery.KeywordMessage)" name="PathDiscovery" symbol="CAPI2_PATH_DISCOVERY_KEYWORD" />
<keyword mask="0x00004" message="$(string.Revocation.KeywordMessage)" name="Revocation" symbol="CAPI2_REVOCATION_KEYWORD" />
<keyword mask="0x00008" message="$(string.Cache.KeywordMessage)" name="Cache" symbol="CAPI2_CACHE_KEYWORD" />
<keyword mask="0x00010" message="$(string.Retrieval.KeywordMessage)" name="Retrieval" symbol="CAPI2_RETRIEVAL_KEYWORD" />
<keyword mask="0x00020" message="$(string.AutoRootUpdate.KeywordMessage)" name="AutoRootUpdate" symbol="CAPI2_AUTO_ROOT_UPDATE_KEYWORD" />
<keyword mask="0x00040" message="$(string.WinVerifyTrust.KeywordMessage)" name="WinVerifyTrust" symbol="CAPI2_WVT_KEYWORD" />
<keyword mask="0x00080" message="$(string.PrivateKey.KeywordMessage)" name="PrivateKey" symbol="CAPI2_PRIVATE_KEY_KEYWORD" />
<keyword mask="0x00100" message="$(string.CertificateStore.KeywordMessage)" name="CertificateStore" symbol="CAPI2_CERTIFICATE_STORE_KEYWORD" />
<keyword mask="0x00200" message="$(string.C[gle=0x80004005]
2014-02-17 14:53:06, Error CSI ertificateDetails.KeywordMessage)" name="CertificateDetails" symbol="CAPI2_CERTIFICATE_DETAILS_KEYWORD"
/>
<keyword mask="0x00400" message="$(string.Catalog.KeywordMessage)" name="Catalog" symbol="CAPI2_CATALOG_KEYWORD" />
</keywords>
<tasks>
<task message="$(string.CertGetCertificateChain.TaskMessage)" name="CertGetCertificateChain" symbol="CAPI2_CERT_GET_CERTIFICATE_CHAIN_TASK" value="11" />
<task message="$(string.CertAIAUrlRetrievalCache.TaskMessage)" name="CertAIAUrlRetrievalCache" symbol="CAPI2_AIA_URL_RETRIEVAL_CACHE_TASK" value="13" />
<task message="$(string.CertAIAUrlRetrievalWire.TaskMessage)" name="CertAIAUrlRetrievalWire" symbol="CAPI2_AIA_URL_RETRIEVAL_WIRE_TASK" value="15" />
<task message="$(string.CertRejectAIAUrlRetrieval.TaskMessage)" name="CertRejectAIAUrlRetrieval" symbol="CAPI2_REJECT_AIA_URL_RETRIEVAL_TASK" value="16" />
<task message="$(string.CertAutoRootUrlRetrievalCache.TaskMessage)" name="CertAutoRootUrlRetrievalCache" symbol="CAPI2_AUTO_ROOT_URL_RETRIEVAL_CACHE_TASK" value="18" />
<task message="$(string.CertAutoRootUrlRetrievalWire.TaskMessage)" name="CertAutoRootUrlRetrievalWire" symbol="CAPI2_AUTO_ROOT_URL_RETRIEVAL_WIRE_TASK" value="20" />
<task message="$(string.CertCrossCertUrlRetrievalCache.TaskMessage)" name="CertCrossCertUrlRetrievalCache" symbol="CAPI2_CROSS_CERT_URL_RETRIEVAL_CACHE_TASK" value="22" />
<task message="$(string.CertCrossCertUrlRetrievalWire.TaskMessage)" name="CertCrossCertUrlRetrievalWire" symbol="CAPI2_CROSS_CERT_URL_RETRIEVAL_WIRE_TASK" value="24" />
<task message="$(string.CertVerifyCertificateChainPolicy.TaskMessage)" name="CertVerifyCertificateChainPolicy" symbol="CAPI2_VERIFY_CERTIFICATE_CHAIN_POLICY_TASK" value="30" />
<task message="$(string.CertVerifyRevocation.TaskMessage)" name="CertVerifyRevocation" symbol="CAPI2_VERIFY_REVOCATION_TASK" value="41" />
<task message="$(string.CertRejectedRevocationInfo.TaskMessage)" name="CertRejectedRevocatio[gle=0x80004005]
2014-02-17 14:53:06, Error CSI nInfo" symbol="CAPI2_REJECTED_REVOCATION_INFO_TASK" value="42" />
<task message="$(string.CryptRetrieveObjectByUrlCache.TaskMessage)" name="CryptRetrieveObjectByUrlCache" symbol="CAPI2_RETRIEVE_OBJECT_BY_URL_CACHE_TASK" value="51" />
<task message="$(string.CryptRetrieveObjectByUrlWire.TaskMessage)" name="CryptRetrieveObjectByUrlWire" symbol="CAPI2_RETRIEVE_OBJECT_BY_URL_WIRE_TASK" value="53" />
<task message="$(string.CertOpenStore.TaskMessage)" name="CertOpenStore" symbol="CAPI2_OPEN_STORE_TASK" value="60" />
<task message="$(string.CryptAcquireCertificatePrivateKey.TaskMessage)" name="CryptAcquireCertificatePrivateKey" symbol="CAPI2_ACQUIRE_CERTIFICATE_PRIVATE_KEY_TASK" value="70" />
<task message="$(string.WinVerifyTrust.TaskMessage)" name="WinVerifyTrust" symbol="CAPI2_WVT_TASK" value="80" />
<task message="$(string.CryptCATAdminEnumCatalogFromHash.TaskMessage)" name="CryptCATAdminEnumCatalogFromHash" symbol="CAPI2_ENUM_CATALOG_FROM_HASH_TASK" value="82" />
<task message="$(string.X509Objects.TaskMessage)" name="X509Objects" symbol="CAPI2_X509_OBJECTS_TASK" value="90" />
</tasks>
<templates>
<template tid="TXml">
<data inType="win:UnicodeString" name="EventWriteData" outType="win:Xml" />
</template>
<template tid="TXml2">
<data inType="win:UnicodeString" name="%1" />
<UserData>
<XmlData xmlns="CertDiagNS">
<EventData>%1</EventData>
</XmlData>
</UserData>
</template>
<template tid="tid_1S">
<data inType="win:UnicodeString" name="%1" outType="xs:string" />
</template>
<template tid="tid_1S_2S">
<data inType="win:UnicodeString" name="%1" outType="xs:string" />
<data inType="win:UnicodeString" name="%2" outType="xs:string" />
</template>
</templates>
<events>
<event channel="Application" level="win:Informational" message="$(string.ROOT_AUTO_UPDATE_INFORMATI[gle=0x80004005]
2014-02-17 14:53:06, Error CSI ONAL)" symbol="ROOT_AUTO_UPDATE_INFORMATIONAL" template="tid_1S_2S" value="0x1001"
/>
<event channel="Application" level="win:Informational" message="$(string.ROOT_LIST_AUTO_UPDATE_URL_RETRIEVAL_INFORMATIONAL)" symbol="ROOT_LIST_AUTO_UPDATE_URL_RETRIEVAL_INFORMATIONAL"
template="tid_1S" value="0x1002" />
<event channel="Application" level="win:Error" message="$(string.ROOT_LIST_AUTO_UPDATE_URL_RETRIEVAL_ERROR)" symbol="ROOT_LIST_AUTO_UPDATE_URL_RETRIEVAL_ERROR" template="tid_1S_2S"
value="0x1003" />
<event channel="Application" level="win:Informational" message="$(string.ROOT_CERT_AUTO_UPDATE_URL_RETRIEVAL_INFORMATIONAL)" symbol="ROOT_CERT_AUTO_UPDATE_URL_RETRIEVAL_INFORMATIONAL"
template="tid_1S" value="0x1004" />
<event channel="Application" level="win:Error" message="$(string.ROOT_CERT_AUTO_UPDATE_URL_RETRIEVAL_ERROR)" symbol="ROOT_CERT_AUTO_UPDATE_URL_RETRIEVAL_ERROR" template="tid_1S_2S"
value="0x1005" />
<event channel="Application" level="win:Informational" message="$(string.CRYPT32_EVENT_LOG_THRESHOLD_WARNING)" symbol="CRYPT32_EVENT_LOG_THRESHOLD_WARNING" template="tid_1S_2S"
value="0x1006" />
<event channel="Application" level="win:Informational" message="$(string.ROOT_SEQUENCE_NUMBER_AUTO_UPDATE_URL_RETRIEVAL_INFORMATIONAL)" symbol="ROOT_SEQUENCE_NUMBER_AUTO_UPDATE_URL_RETRIEVAL_INFORMATIONAL"
template="tid_1S" value="0x1007" />
<event channel="Application" level="win:Error" message="$(string.ROOT_SEQUENCE_NUMBER_AUTO_UPDATE_URL_RETRIEVAL_ERROR)" symbol="ROOT_SEQUENCE_NUMBER_AUTO_UPDATE_URL_RETRIEVAL_ERROR"
template="tid_1S_2S" value="0x1008" />
<event channel="Application" level="win:Informational" message="$(string.UNTRUSTED_ROOT_INFORMATIONAL)" symbol="UNTRUSTED_ROOT_INFORMATIONAL" template="tid_1S_2S" value="0x1009"
/>
<event channel="Application" level="win:Informational" message="$(string.PARTIAL_CHAIN_INFORMATIONAL)" symbol="PARTIAL_CHAIN_INFORMATIONAL" template="tid_1S_2S" value="0x100A"
/>
<event channel="Applicatio[gle=0x80004005]
2014-02-17 14:53:06, Error CSI n" level="win:Error" message="$(string.ROOT_LIST_AUTO_UPDATE_EXTRACT_ERROR)" symbol="ROOT_LIST_AUTO_UPDATE_EXTRACT_ERROR"
template="tid_1S_2S" value="0x100B" />
<event channel="Application" level="win:Informational" message="$(string.ROOT_AUTO_DELETE_INFORMATIONAL)" symbol="ROOT_AUTO_DELETE_INFORMATIONAL" template="tid_1S_2S" value="0x100C"
/>
<event channel="Application" level="win:Informational" message="$(string.ROOT_AUTO_PROPERTY_UPDATE_INFORMATIONAL)" symbol="ROOT_AUTO_UPDATE_PROPERTY_INFORMATIONAL" template="tid_1S_2S"
value="0x100D" />
<event channel="Application" level="win:Error" message="$(string.ROOT_LIST_AUTO_UPDATE_ADD_ERROR)" symbol="ROOT_LIST_AUTO_UPDATE_ADD_ERROR" template="tid_1S_2S" value="0x100E"
/>
<event channel="Application" level="win:Informational" message="$(string.ROOT_LIST_AUTO_UPDATE_INFORMATIONAL)" symbol="ROOT_LIST_AUTO_UPDATE_INFORMATIONAL" template="tid_1S"
value="0x100F" />
<event channel="Application" level="win:Informational" message="$(string.DISALLOWED_LIST_AUTO_UPDATE_INFORMATIONAL)" symbol="DISALLOWED_LIST_AUTO_UPDATE_INFORMATIONAL" template="tid_1S"
value="0x1010" />
<event channel="Application" level="win:Error" message="$(string.PFX_MAX_AUTHSAFES_EXCEEDED_ERROR)" symbol="PFX_MAX_AUTHSAFES_EXCEEDED_ERROR" template="tid_1S_2S" value="0x1050"
/>
<event channel="Application" level="win:Error" message="$(string.PFX_MAX_ITERATION_COUNT_EXCEEDED_ERROR)" symbol="PFX_MAX_ITERATION_COUNT_EXCEEDED_ERROR" template="tid_1S_2S"
value="0x1051" />
<event channel="Application" level="win:Error" message="$(string.PFX_MAX_SAFEBAGS_COUNT_EXCEEDED_ERROR)" symbol="PFX_MAX_SAFEBAGS_COUNT_EXCEEDED_ERROR" template="tid_1S_2S"
value="0x1052" />
<event channel="Application" level="win:Error" message="$(string.CATDB_INIT_ERROR)" symbol="CATDB_INIT_ERROR" template="tid_1S_2S" value="0x0100" />
<event channel="Application" level="win:Error" message="$(string.CATDB_JET_INIT_ERROR)" symbol="CATDB_JET_INIT_ERROR" template="ti[gle=0x80004005]
2014-02-17 14:53:06, Error CSI d_1S" value="0x0101" />
<event channel="Application" level="win:Critical" message="$(string.SYSTEMWRITER_INIT_FAILURE)" symbol="SYSTEMWRITER_INIT_FAILURE" template="tid_1S" value="0x0200"
/>
<event channel="Application" level="win:Critical" message="$(string.SYSTEMWRITER_ONIDENTITY_FAILURE)" symbol="SYSTEMWRITER_ONIDENTITY_FAILURE" template="tid_1S" value="0x0201"
/>
<event channel="OpCh" keywords="PathValidation PathDiscovery" level="win:Informational" message="$(string.DefaultCAPI2.EventMessage)" opcode="win:Start" symbol="CAPI2_CERT_GET_CERTIFICATE_CHAIN_START_EVENT"
task="CertGetCertificateChain" template="TXml" value="10" />
<event channel="OpCh" keywords="PathValidation PathDiscovery" level="win:Informational" message="$(string.DefaultCAPI2.EventMessage)" opcode="win:Stop" symbol="CAPI2_CERT_GET_CERTIFICATE_CHAIN_STOP_EVENT"
task="CertGetCertificateChain" template="TXml" value="11" />
<event channel="OpCh" keywords="PathDiscovery Cache" level="win:Informational" message="$(string.DefaultCAPI2.EventMessage)" opcode="win:Start" symbol="CAPI2_AIA_URL_RETRIEVAL_CACHE_START_EVENT"
task="CertAIAUrlRetrievalCache" template="TXml" value="12" />
<event channel="OpCh" keywords="PathDiscovery Cache" level="win:Informational" message="$(string.DefaultCAPI2.EventMessage)" opcode="win:Stop" symbol="CAPI2_AIA_URL_RETRIEVAL_CACHE_STOP_EVENT"
task="CertAIAUrlRetrievalCache" template="TXml" value="13" />
<event channel="OpCh" keywords="PathDiscovery Retrieval" level="win:Informational" message="$(string.DefaultCAPI2.EventMessage)" opcode="win:Start" symbol="CAPI2_AIA_URL_RETRIEVAL_WIRE_START_EVENT"
task="CertAIAUrlRetrievalWire" template="TXml" value="14" />
<event channel="OpCh" keywords="PathDiscovery Retrieval" level="win:Informational" message="$(string.DefaultCAPI2.EventMessage)" opcode="win:Stop" symbol="CAPI2_AIA_URL_RETRIEVAL_WIRE_STOP_EVENT"
task="CertAIAUrlRetrievalWire" template="TXml" value="15" />
<event channel="OpCh" keywords="PathDiscover[gle=0x80004005]
2014-02-17 14:53:06, Error CSI y Cache Retrieval" level="win:Error" message="$(string.DefaultCAPI2.EventMessage)" opcode="win:Info"
symbol="CAPI2_REJECT_AIA_URL_RETRIEVAL_INFO_EVENT" task="CertRejectAIAUrlRetrieval" template="TXml" value="16" />
<event channel="OpCh" keywords="PathDiscovery AutoRootUpdate Cache" level="win:Informational" message="$(string.DefaultCAPI2.EventMessage)" opcode="win:Start" symbol="CAPI2_AUTO_ROOT_URL_RETRIEVAL_CACHE_START_EVENT"
task="CertAutoRootUrlRetrievalCache" template="TXml" value="17" />
<event channel="OpCh" keywords="PathDiscovery AutoRootUpdate Cache" level="win:Informational" message="$(string.DefaultCAPI2.EventMessage)" opcode="win:Stop" symbol="CAPI2_AUTO_ROOT_URL_RETRIEVAL_CACHE_STOP_EVENT"
task="CertAutoRootUrlRetrievalCache" template="TXml" value="18" />
<event channel="OpCh" keywords="PathDiscovery AutoRootUpdate Retrieval" level="win:Informational" message="$(string.DefaultCAPI2.EventMessage)" opcode="win:Start" symbol="CAPI2_AUTO_ROOT_URL_RETRIEVAL_WIRE_START_EVENT"
task="CertAutoRootUrlRetrievalWire" template="TXml" value="19" />
<event channel="OpCh" keywords="PathDiscovery AutoRootUpdate Retrieval" level="win:Informational" message="$(string.DefaultCAPI2.EventMessage)" opcode="win:Stop" symbol="CAPI2_AUTO_ROOT_URL_RETRIEVAL_WIRE_STOP_EVENT"
task="CertAutoRootUrlRetrievalWire" template="TXml" value="20" />
<event channel="OpCh" keywords="PathDiscovery Cache" level="win:Informational" message="$(string.DefaultCAPI2.EventMessage)" opcode="win:Start" symbol="CAPI2_CROSS_CERT_URL_RETRIEVAL_CACHE_START_EVENT"
task="CertCrossCertUrlRetrievalCache" template="TXml" value="21" />
<event channel="OpCh" keywords="PathDiscovery Cache" level="win:Informational" message="$(string.DefaultCAPI2.EventMessage)" opcode="win:Stop" symbol="CAPI2_CROSS_CERT_URL_RETRIEVAL_CACHE_STOP_EVENT"
task="CertCrossCertUrlRetrievalCache" template="TXml" value="22" />
<event channel="OpCh" keywords="PathDiscovery Retrieval" level="win:Informational" message="$(string.Defaul[gle=0x80004005]
2014-02-17 14:53:06, Error CSI tCAPI2.EventMessage)" opcode="win:Start" symbol="CAPI2_CROSS_CERT_URL_RETRIEVAL_WIRE_START_EVENT"
task="CertCrossCertUrlRetrievalWire" template="TXml" value="23" />
<event channel="OpCh" keywords="PathDiscovery Retrieval" level="win:Informational" message="$(string.DefaultCAPI2.EventMessage)" opcode="win:Stop" symbol="CAPI2_CROSS_CERT_URL_RETRIEVAL_WIRE_STOP_EVENT"
task="CertCrossCertUrlRetrievalWire" template="TXml" value="24" />
<event channel="OpCh" keywords="PathValidation" level="win:Informational" message="$(string.DefaultCAPI2.EventMessage)" opcode="win:Info" symbol="CAPI2_VERIFY_CERTIFICATE_CHAIN_POLICY_INFO_EVENT"
task="CertVerifyCertificateChainPolicy" template="TXml" value="30" />
<event channel="OpCh" keywords="PathValidation Revocation" level="win:Informational" message="$(string.DefaultCAPI2.EventMessage)" opcode="win:Start" symbol="CAPI2_VERIFY_REVOCATION_START_EVENT"
task="CertVerifyRevocation" template="TXml" value="40" />
<event channel="OpCh" keywords="PathValidation Revocation" level="win:Informational" message="$(string.DefaultCAPI2.EventMessage)" opcode="win:Stop" symbol="CAPI2_VERIFY_REVOCATION_STOP_EVENT"
task="CertVerifyRevocation" template="TXml" value="41" />
<event channel="OpCh" keywords="PathValidation Revocation" level="win:Error" message="$(string.DefaultCAPI2.EventMessage)" opcode="win:Info" symbol="CAPI2_REJECTED_REVOCATION_INFO_INFO_EVENT"
task="CertRejectedRevocationInfo" template="TXml" value="42" />
<event channel="OpCh" keywords="PathDiscovery Revocation AutoRootUpdate Cache" level="win:Informational" message="$(string.DefaultCAPI2.EventMessage)" opcode="win:Start"
symbol="CAPI2_RETRIEVE_OBJECT_BY_URL_CACHE_START_EVENT" task="CryptRetrieveObjectByUrlCache" template="TXml" value="50" />
<event channel="OpCh" keywords="PathDiscovery Revocation AutoRootUpdate Cache" level="win:Informational" message="$(string.DefaultCAPI2.EventMessage)" opcode="win:Stop" symbol="CAPI2_RETRIEVE_OBJECT_BY_URL_CACHE_STOP_EVENT"
task="CryptRet[gle=0x80004005]
2014-02-17 14:53:06, Error CSI rieveObjectByUrlCache" template="TXml" value="51" />
<event channel="OpCh" keywords="PathDiscovery Revocation AutoRootUpdate Retrieval" level="win:Informational" message="$(string.DefaultCAPI2.EventMessage)" opcode="win:Start"
symbol="CAPI2_RETRIEVE_OBJECT_BY_URL_WIRE_START_EVENT" task="CryptRetrieveObjectByUrlWire" template="TXml" value="52" />
<event channel="OpCh" keywords="PathDiscovery Revocation AutoRootUpdate Retrieval" level="win:Informational" message="$(string.DefaultCAPI2.EventMessage)" opcode="win:Stop"
symbol="CAPI2_RETRIEVE_OBJECT_BY_URL_WIRE_STOP_EVENT" task="CryptRetrieveObjectByUrlWire" template="TXml" value="53" />
<event channel="OpCh" keywords="CertificateStore" level="win:Verbose" message="$(string.DefaultCAPI2.EventMessage)" opcode="win:Info" symbol="CAPI2_OPEN_STORE_INFO_EVENT"
task="CertOpenStore" template="TXml" value="60" />
<event channel="OpCh" keywords="PrivateKey" level="win:Informational" message="$(string.DefaultCAPI2.EventMessage)" opcode="win:Info" symbol="CAPI2_ACQUIRE_CERTIFICATE_PRIVATE_KEY_INFO_EVENT"
task="CryptAcquireCertificatePrivateKey" template="TXml" value="70" />
<event channel="OpCh" keywords="WinVerifyTrust" level="win:Informational" message="$(string.DefaultCAPI2.EventMessage)" opcode="win:Start" symbol="CAPI2_WVT_START_EVENT"
task="WinVerifyTrust" template="TXml" value="80" />
<event channel="OpCh" keywords="WinVerifyTrust" level="win:Informational" message="$(string.DefaultCAPI2.EventMessage)" opcode="win:Stop" symbol="CAPI2_WVT_STOP_EVENT"
task="WinVerifyTrust" template="TXml" value="81" />
<event channel="OpCh" keywords="Catalog" level="win:Informational" message="$(string.DefaultCAPI2.EventMessage)" opcode="win:Info" symbol="CAPI2_ENUM_CATALOG_FROM_HASH_INFO_EVENT"
task="CryptCATAdminEnumCatalogFromHash" template="TXml" value="82" />
<event channel="OpCh" keywords="CertificateDetails" level="win:Informational" message="$(string.DefaultCAPI2.EventMessage)" opcode="win:Info" symbol="CAPI2_X509_OBJEC[gle=0x80004005]
2014-02-17 14:53:06, Error CSI TS_INFO_EVENT" task="X509Objects" template="TXml" value="90" />
</events>
</provider>
</events>"
[gle=0x80004005]
2014-02-17 14:53:06, Error CSI 00000016@2014/2/17:13:53:06.931 (F) d:\w7rtm\base\wcp\cmiadapter\installers.cpp(352): Error HRESULT_FROM_WIN32(ERROR_ACCESS_DENIED)
originated in function Windows::WCP::CmiAdapter::CMIWrapperBasicInstaller::ResolveAndInvokeInstaller expression: hr
[gle=0x80004005]
2014-02-17 14:53:07, Info CBS Progress: UI message updated. Operation type: Update. Stage: 1 out of 1. Percent progress: 67.
2014-02-17 14:53:08, Error CSI 00000007@2014/2/17:13:53:08.819 (F) CMIADAPTER: Exiting with HRESULT code = HRESULT_FROM_WIN32(ERROR_ACCESS_DENIED).
[gle=0x80004005]
2014-02-17 14:53:08, Error CSI 00000017@2014/2/17:13:53:08.819 (F) d:\w7rtm\base\wcp\cmiadapter\installers.cpp(123): Error HRESULT_FROM_WIN32(ERROR_ACCESS_DENIED)
originated in function Windows::WCP::CmiAdapter::CMIWrapperBasicInstaller::Install expression: hr
[gle=0x80004005]
2014-02-17 14:53:09, Info CSI 00000018@2014/2/17:13:53:09.708 CSI Advanced installer perf trace:
CSIPERF:AIDONE;{3bb9fd2b-351e-4b9c-b1fc-ed0758805998};Microsoft-Windows-CAPI2-instrumentation, Version = 6.1.7601.18277, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral,
TypeName neutral, PublicKey neutral;5114798
2014-02-17 14:53:09, Info CSI 00000019 Performing 1 operations; 1 are not lock/unlock and follow:
LockComponentPath (10): flags: 0 comp: {l:16 b:1a579497e72bcf01070000004804c005} pathid: {l:16 b:1a579497e72bcf01080000004804c005} path: [l:234{117}]"\SystemRoot\WinSxS\x86_microsoft.windows.s..ation.badcomponents_31bf3856ad364e35_6.1.7600.16385_none_3868158f24725705"
pid: 448 starttime: 130371187001140291 (0x01cf2be762262443)
2014-02-17 14:53:10, Error [0x01802b] CSI 0000001a (F) Failed execution of queue item Installer: Events ({3bb9fd2b-351e-4b9c-b1fc-ed0758805998}) with HRESULT HRESULT_FROM_WIN32(ERROR_ACCESS_DENIED). Failure
will not be ignored: A rollback will be initiated after all the operations in the installer queue are completed; installer is reliable (2)[gle=0x80004005]
Thanks!Hi,
From the error code, this issue may be caused by incorrect permission on registry.
Please download
Subinacl.msi and run this command to grant registry with administrator rights.
Open CMD, type these commands below:
subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f
subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f
subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f
subinacl /subdirectories %SystemDrive% /grant=administrators=f
subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=system=f
subinacl /subkeyreg HKEY_CURRENT_USER /grant=system=f
subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=system=f
subinacl /subdirectories %SystemDrive% /grant=system=f
After this, please try re-installing the update again.
Andy Altmann
TechNet Community Support -
Windows Update KB2467173 fails with Error code 1603
My windows update is failing over and over again with this message and it won't update C++ redistributable that a new program I started using requires.
The event log says as follows:
Product: Microsoft Visual C++ 2010 x86 Redistributable - 10.0.30319 - Update 'KB2467173' could not be installed. Error code 1603. Additional information is available in the log file C:\DOCUME~1\me\LOCALS~1\Temp\Microsoft Visual C++
2010 x86 Redistributable Setup_20150210_173547615-MSI_vc_red.msi.txt.
Thank you in Advance.I would recommend that you start with recommendations shared here: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/failure-to-install-windows-updates-error-code/934854af-0e1b-451e-889c-2fa869bab82f
If this does not help then you will need to examine the txt log file (The path is in the error message) to get more details.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
Update trigger fails with value too large for column error on timestamp
Hello there,
I've got a problem with several update triggers. I've several triggers monitoring a set of tables.
Upon each update the updated data is compared with the current values in the table columns.
If different values are detected the update timestamp is set with the current_timestamp. That
way we have a timestamp that reflects real changes in relevant data. I attached an example for
that kind of trigger below. The triggers on each monitored table only differ in the columns that
are compared.
CREATE OR REPLACE TRIGGER T_ava01_obj_cont
BEFORE UPDATE on ava01_obj_cont
FOR EACH ROW
DECLARE
v_changed boolean := false;
BEGIN
IF NOT v_changed THEN
v_changed := (:old.cr_adv_id IS NULL AND :new.cr_adv_id IS NOT NULL) OR
(:old.cr_adv_id IS NOT NULL AND :new.cr_adv_id IS NULL)OR
(:old.cr_adv_id IS NOT NULL AND :new.cr_adv_id IS NOT NULL AND :old.cr_adv_id != :new.cr_adv_id);
END IF;
IF NOT v_changed THEN
v_changed := (:old.is_euzins_relevant IS NULL AND :new.is_euzins_relevant IS NOT NULL) OR
(:old.is_euzins_relevant IS NOT NULL AND :new.is_euzins_relevant IS NULL)OR
(:old.is_euzins_relevant IS NOT NULL AND :new.is_euzins_relevant IS NOT NULL AND :old.is_euzins_relevant != :new.is_euzins_relevant);
END IF;
[.. more values being compared ..]
IF v_changed THEN
:new.update_ts := current_timestamp;
END IF;
END T_ava01_obj_cont;Really relevant is the statement
:new.update_ts := current_timestamp;So far so good. The problem is, it works the most of time. Only sometimes it fails with the following error:
SQL state [72000]; error code [12899]; ORA-12899: value too large for column "LGT_CLASS_AVALOQ"."AVA01_OBJ_CONT"."UPDATE_TS"
(actual: 28, maximum: 11)
I can't see how the value systimestamp or current_timestamp (I tried both) should be too large for
a column defined as TIMESTAMP(6). We've got tables where more updates occur then elsewhere.
Thats where the most of the errors pop up. Other tables with fewer updates show errors only
sporadicly or even never. I can't see a kind of error pattern. It's like that every 10.000th update
or less failes.
I was desperate enough to try some language dependend transformation like
IF v_changed THEN
l_update_date := systimestamp || '';
select value into l_timestamp_format from nls_database_parameters where parameter = 'NLS_TIMESTAMP_TZ_FORMAT';
:new.update_ts := to_timestamp_tz(l_update_date, l_timestamp_format);
END IF;to be sure the format is right. It didn't change a thing.
We are using Oracle Version 10.2.0.4.0 Production.
Did anyone encounter that kind of behaviour and solve it? I'm now pretty certain that it has to
be an oracle bug. What is the forum's opinion on that? Would you suggest to file a bug report?
Thanks in advance for your help.
Kind regards
JanCould you please edit your post and use formatting and tags. This is pretty much unreadable and the forum boogered up some of your code.
Instructions are here: http://forums.oracle.com/forums/help.jspa -
RoboHelp 10.0.1 Update installation fails with error code: U44M2P7
After installing RoboHelp 10, I ran the 10.0.1 Update's installer. It failed with the following error log:
Adobe RoboHelp 10.0.1 Update
Installation failed. Error Code: U44M2P2
I tried re-installing RoboHelp 10, followed by a reboot of the machine. Several attempts to run the 10.0.1 updater gave me exactly the same error. No applications were running when the installation was attempted.
Any help is greatly appreciated!
LayneOnly Adobe can tell the meaning of the error codes.
Are you downloading the update or running it from Adobe's site.
Try downloading from here. http://www.adobe.com/support/robohelp/downloads.html
Otherwise this is an installation problem that is supported free. Contact Adobe.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
Update KB3033929 fails with error code 80004005
Security Update for Windows 7 for x64-based Systems (KB3033929)
Installation date: 3/11/2015 8:57 AM
Installation status: Failed
Error details: Code 80004005
Update type: Important
A security update. . .
I can't find any info on this error. Tried the update twice and both times it failed.OK, I ran it again.. and I think this is the relevant part of the +200M log. It does seem to have something to do with the boot manager or knowing which drive is the 'globalroot', perhaps.
2015-03-13 08:33:13, Info CSI 0000003d Begin executing advanced installer phase 38 (0x00000026) index 16 (0x0000000000000010) (sequence 55)
Old component: [ml:360{180},l:358{179}]"Microsoft-Windows-BootEnvironment-Core-MemoryDiagnostic, Culture=neutral, Version=6.1.7601.18741, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=amd64, versionScope=NonSxS"
New component: [ml:360{180},l:358{179}]"Microsoft-Windows-BootEnvironment-Core-MemoryDiagnostic, Culture=neutral, Version=6.1.7601.17514, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=amd64, versionScope=NonSxS"
Install mode: install
Installer ID: {81a34a10-4256-436a-89d6-794b97ca407c}
Installer name: [15]"Generic Command"
2015-03-13 08:33:13, Info CSI 0000003e Performing 1 operations; 1 are not lock/unlock and follow:
LockComponentPath (10): flags: 0 comp: {l:16 b:9c8942df895dd0011800000074043c05} pathid: {l:16 b:9c8942df895dd0011900000074043c05} path: [l:238{119}]"\SystemRoot\WinSxS\amd64_microsoft-windows-b..re-memorydiagnostic_31bf3856ad364e35_6.1.7601.18741_none_3637d03b1b5800bc" pid: 474 starttime: 130707235496916126 (0x01d05d89c55df49e)
2015-03-13 08:33:13, Info CSI 0000003f Performing 1 operations; 1 are not lock/unlock and follow:
LockComponentPath (10): flags: 0 comp: {l:16 b:9c8942df895dd0011a00000074043c05} pathid: {l:16 b:9c8942df895dd0011b00000074043c05} path: [l:238{119}]"\SystemRoot\WinSxS\amd64_microsoft-windows-b..re-memorydiagnostic_31bf3856ad364e35_6.1.7601.17514_none_365b53d91b3ce4ff" pid: 474 starttime: 130707235496916126 (0x01d05d89c55df49e)
2015-03-13 08:33:13, Info CSI 00000040 Calling generic command executable (sequence 3): [20]"C:\Windows\bfsvc.exe"
CmdLine: [47]""C:\Windows\bfsvc.exe" C:\Windows\boot /nofonts"
2015-03-13 08:33:45, Error [0x018009] CSI 00000041 (F) Done with generic command 3; CreateProcess returned 0, CPAW returned S_OK
Process exit code 112 (0x00000070) resulted in success? FALSE
Process output: [l:8995 [4096]"BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 1 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 2 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 3 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 4 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 5 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 6 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 7 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 8 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 9 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 10 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 11 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 12 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\Harddis[gle=0x80004005]
2015-03-13 08:33:45, Error [0x018009] CSI kVolume1\Boot\bootmgr) failed! (Attempt 13 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 14 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 15 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 16 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 17 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 18 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 19 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 20 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 21 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 22 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 23 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 24 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 25 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 26 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\[gle=0x80004005]
2015-03-13 08:33:45, Error [0x018009] CSI bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 27 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed!"[4096]" (Attempt 28 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 29 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 30 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 31 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 32 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 33 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 34 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 35 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 36 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 37 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 38 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 39 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 40 of 60) Last Error = 0x[gle=0x80004005]
2015-03-13 08:33:45, Error [0x018009] CSI 70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 41 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 42 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 43 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 44 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 45 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 46 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 47 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 48 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 49 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 50 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 51 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 52 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 53 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) fail[gle=0x80004005]
2015-03-13 08:33:45, Error [0x018009] CSI ed! (Attempt 54 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 55 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALR"[803]"OOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 56 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 57 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 58 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 59 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 60 of 60) Last Error = 0x70
BFSVC: Error copying boot files from C:\Windows\boot\PCAT to \\?\GLOBALROOT\Device\HarddiskVolume1\Boot! Last Error = 0x70
"][gle=0x80004005]
2015-03-13 08:33:45, Info CSI 00000042 Calling generic command executable (sequence 4): [24]"C:\Windows\fveupdate.exe"
CmdLine: [35]""C:\Windows\fveupdate.exe" /memtest"
2015-03-13 08:33:45, Info CSI 00000043 Done with generic command 4; CreateProcess returned 0, CPAW returned S_OK
Process exit code 0 resulted in success? TRUE
Process output: [l:248 [248]"BitLockerUpdate: Running.
BitLockerUpdate: Service request is for memtest.exe.
BitLockerUpdate: BitLocker Drive Encryption is not turned ON on the OS volume.
BitLockerUpdate: No servicing was performed on the OS volume.
BitLockerUpdate: Done.
Edit: One thing I've noticed on that PC, the 'system reserved' partition is only 25M, versus the usual 100M. I might try to boot using the recovery console and see what happens. -
Dear all,
I am working on J2ME with Forte CE 3.0, when I am trying to "update jar" of a simple "hello World" program, sometimes it works / execute, sometimes it fails with an error "cannot start preverifier".
It normally works after I reboot the computer, and normally fails when I update JAR repeatedly.
Following is my working envirnoment:
Windows ME
Toshiba notebook
Forte CE3.0 and sdk 1.3..1a
J2ME1.0.3
what can be wrong? Please help.
GodfreyI am having the SAME exact problem.
The output window then states:
c:\j2mewtk\bin\preverify.exe @ c:\windows\temp\preverify61711.tmp\files.txt
Cannot start preverifier.
Errors compiling sample.
I can compile and my programs only run them once, then this error pops up. I have to shut down Forte for it to work again. Any help would be appreciated.
Forte 3.0, Java 2 SDK 1.3.1_01, J2ME Wireless Toolkit 1.0.3
AMD 1.3ghz, 384megs, Win 98
-Mark Fillmore -
Clean Install Solaris 10 05/09 - Update Manager Fails with Valid Acct
I have a clean install of Solaris 10 05/09, and Update Manager fails to register using a valid accout which I can login with at the Sun website. Why is this happening? How can this be fixed?
Here's the output from the script....
User: root
Logname: root
Tue Oct 6 15:35:18 EDT 2009
unknown
smpatch settings:
patchpro.backout.directory - ""
patchpro.baseline.directory - /var/sadm/spool
patchpro.download.directory - /var/sadm/spool
patchpro.install.types - rebootafter:reconfigafter:standard
patchpro.patch.source - https://getupdates1.sun.com/
patchpro.patchset - current2
patchpro.proxy.host - ""
patchpro.proxy.passwd **** ****
patchpro.proxy.port - 8080
patchpro.proxy.user - ""
smpatch analyze:
Failure: Cannot connect to retrieve current2.zip: This system is currently unreg istered and is unable to retrieve patches from the Sun Update Connection. Please register your system using the Update Manager, /usr/bin/updatemanager or provid e valid Sun Online Account(SOA) credentials.
Entitlement:
cat: cannot open /var/sadm/spool/cache/entitlement/*entitlement_client
Sun UC patch revision:
120336-04
121082-06
121119-16
121454-02
123004-03
123006-07
123631-03
123896-05
123896-15
124187-07
137138-09
Solaris release:
Solaris 10 5/09 s10x_u7wos_08 X86
Copyright 2009 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 30 March 2009
Solaris Kernel: Generic_141415-10
Machine Type: i86pc
Platform: i86pc
Java versions:
System default:
java version "1.5.0_21"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_21-b01)
Java HotSpot(TM) Client VM (build 1.5.0_21-b01, mixed mode, sharing)
Java 5:
java version "1.5.0_21"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_21-b01)
Java HotSpot(TM) Client VM (build 1.5.0_21-b01, mixed mode, sharing)
Java 6:
Unable to locate JRE meeting specification "1.6*"
Java used by smpatch and updatemanager:
/usr/sbin/pprosvc:JAVACMD="/usr/jdk/latest/bin/java -version:1.5*"
/bin/updatemanager:JAVA_EXEC="/usr/jdk/latest/bin/java -version:1.5*"
Cacao Java version:
java-home=/usr/jdk/jdk1.5.0_21
Cacao Base Directories:
cacao.install.rt.base.dir=/
cacao.install.etc.base.dir=/
Software Cluster:
CLUSTER=SUNWCall
All ccr properties:
18:
Property not defined: 18
cns.assetid:
cns.br.SunUCenabled:
true
cns.ccr.keyGenPath:
/usr/lib/cc-ccr/bin/ccrKeyGen
cns.clientid:
cns.httpproxy.auth:
cns.httpproxy.ipaddr:
cns.httpproxy.port:
cns.regtoken:
cns.security.password:
cns.security.privatekey:
cns.security.publickey:
cns.swup.UMautolaunch:
false
cns.swup.autoAnalysis.enabled:
true
cns.swup.checkinInterval:
2
cns.swup.lastCheckin:
0
cns.swup.patchbaseline:
current
cns.swup.regRequired:
true
cns.transport.serverurl:
patchsvr not installed.
Sun UC package status:
SUNWbreg not installed
SUNWdc not installed
Cacao instances:
online 15:19:45 svc:/application/management/common-agent-container-1:def ault
Services in maintenance/disabled state:
svc:/application/print/server:default (LP print server)
State: disabled since Tue Oct 06 15:15:37 2009
Reason: Disabled by an administrator.
See: http://sun.com/msg/SMF-8000-05
See: man -M /usr/share/man -s 1M lpsched
Impact: 2 dependent services are not running:
svc:/application/print/rfc1179:default
svc:/application/print/ipp-listener:default
Please attach /tmp/unknown-061009-suc-out.Z in your reply to the Sun Update Conn ection Technical Support Team.
# -
my iphone 5 is connected to a wi-fi network and i'm able to browse the web and receive emails. however when i try to update the software the process fails with the following message "Unable to Verify Update. iOS 6.1 failed verification because you are no longer connected Internet." It gives an open to "Close" or "Try again", but the retry is also unsuccessful.
Try to connect to secure web site. If you can't, that would mean that your iphone is unable to authenticate itself to apple servers in order to download update. If you can - I would still guess same but with less certainty and suggest to update on another network.
Maybe you are looking for
-
Youtube Crashes my computer. Blue Screen event.
OK, so, I have a Toshiba laptop that runs Windows Vista. The internet browser I use is Mozilla Firefox ( just recently downloaded a new beta version of it too and tried that, didn't fix anything). Every time when I'm on youtube, my computer shuts dow
-
GOA Internal notes and Vendor text not transmitted to R/3
Hi SRM Gurus, I'm currently working with SRM_SERVER 500(SAPKIBKS09) release, we use ECS (Extended Classic Senario) and we have following problem with global outline agreements (GOA). In a GOA, the Internal notes and vendor text can be entered on Head
-
Failure: "linker.cp​p", line 3386
When I open the VI, a pop up error linker.cpp @ line 3386 and d the Labview will crash and go out. I created a password for the VI. Windows 98 LV 6.0.2
-
Argentina - EBS with format AUZUG and UMSATZ (using MultiCash program)
Hi, We are mapping the external transaction types while configuring EBS with AUZUG and UMSATZ format for our client. Does anybody have a document explaining the external transaction types in case of UMSATZ format, based on which we can define the pos
-
TS1538 when trying to sync with itunes my only option is restore
when I try to get my music onto my iphone 4s the only option I get in itunes is restore. I was able to transfer everything else.....any ideas?