Update Repository greyed out

Hi SDNers,
We are upgrading from SAP MDM 7.1 SP2 to SAP MDM 7.1 SP3 .
Followed the below stps:
1. I have placed the Respository archive of SP2 in the archive folder of SP3.
2. Create Repository from Archive -> Give all the details
The repository is getting created and in Unload status.
I know, we have to Update Repository after this.
But the Update Repository option is greyed out.
Any suggestions.
Thanks,
Priti

Hi Priti,
there's no upgrade of the repository required from 7.1 SP2 to 7.1 SP3. The database schema used for a repository did not change. If you have successfully unarchived you SP2 repository in an SP3 environment, your repository upgrade is basically done. You can use Console's verify function to check if there is everything OK with your repository.
Best regards
Michael

Similar Messages

  • Flash Pro CS6  Update menu greyed out + AAM fail,supressed by the Admin - Win7-64

    Hi,
    I want to update Flash Pro Cs6 (PC Win7 64bit) to Update2.
    However, the menu Help>Updates is greyed out.
    The Update2 AMM patch installer says "updates could not be applied. Contact your system Admin. Updates have been suppressed by the Admin"
    before starting.
    This seems to point towards a privilege issue but, I have tried to :
    run Flash as admin, run the updater as admin, install flash logged in as admin and updater logged in as admin,
    without any luck....
    This is the install log summary:
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 0 error(s), 4 warning(s)
    WARNING: DS013: Payload {7EABC54B-02C3-4DA1-9EB4-974CE7414066} AdobeHelp 3.4.0.0 is already installed and the session payload {D38116C8-C472-4BB0-AD6F-0C1DD1320D1D} AdobeHelp 4.0.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {1A1E5FF9-D0FD-42A3-8E18-E5E7E95E1AB4} DynamiclinkSupport 5.5.0.0 is already installed and the session payload {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {A8798E04-96FF-4564-9157-0D4C89CB794C} DynamiclinkSupport 5.0.0.0 is already installed and the session payload {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Checking payloads upgrade/conflict relationships : Failed with code 1
    Cheers,
    F.
    PS :
    sorry for cross post from this :http://forums.adobe.com/message/4793645#4793645
    Just noticed this was the dedicated forum for install issues.

    Manually update Creative Suite  6 products
    Go to the Adobe.com Product updates site and choose the update you want to download.
    When the download completes, start the update by double-clicking the Set-up.exe (Windows)
    Prompted to shut down conflicting applications, do the following:
    Windows
    Right-click the taskbar and select Task Manager.
    Select the Processes tab, select a conflicting process, and click End Process.
    Repeat for any additional conflicting processes.
    Check to see if the update downloaded successfully.
    \Users\[username]\Local\AppData\Adobe\AAMUpdater\1.0\
    Sarika

  • Currency Conversion in Update Rule greyed out

    Hi All,
    I searched this forum for what I thought something would have been reported on, but in the update rule for a key figure there is the option to input currency translation.
    The problem is it's greyed out and I cannot input the translation.  The screen looks just like the conversion entry you put in the query designer for the key figure.
    Why is this field greyed out?
    Thanks,  Mark.

    Hi again,
    currency of the source and the target-keyfigure should differ.
    create a new KYF as copy of 0AMOUNT with a differing Currency object or with fixed Currenca and call it AMOUNT in <CURRENCY>.
    Will work
    Cheers
    Sven

  • Updates Option greyed out.

    I have a new install of PSE 10 on a 64 bit, win7 laptop. All seems to working correctly with the exception of the Updates option under Help which is greyed out.

    I don't as the updates are certainly back up and available again.  It could possibly be a configuration with your software firewall but I would really recommend posting your inquiry to the Photoshop Elements forum.  The Photoshop Elements forums are better able to answer product specific questions such as issues with an application update.

  • Got an Acer netbook which has linux operating system with Firefox 3.5 installed, the check for updates is greyed out, downloaded firefox 7 but will not install, we are constantly prompted by Firefox to update as 3.5 will no longer be supported

    Basically acer netbook will not allow us to update Firefox from ver 3.5 to 7, check for updates box is greyed out, thanks for your help

    Hi James,
    Many thanks for your reply, the machine was bought from Currys the 3.6 download warns you it will only be supported for a short time, and recommends downloading ver 7, I am unfamiliar with the workings of Linux but the machine has been good, there must be a solution, no problem if we have to pay for the upgrade. Many thanks for your help,
    Cheers, Steve

  • Can't update Adobe programs. Update option greyed out, DL'd update fails. Win7, PScs6, AIcs5, FLcs6?

    None of my Adobe programs give me the option to update. The option is greyed out under the Help menu. It fails when trying to update through Bridge. When I download the update through a browser and try to update that way, I get the message:
    I have admin priveleges and I'm running it as administrator. This is on Windows 7 Enterprise, 64 bit. Photoshop CS6, Flash CS6, Illustrator CS5.
    Any help is appreciated.

    Hi Jon,
    It seems like you have created a Package using AAMEE. Could you please try creating an update package again using AAMEE for all the softwares and then try using them on the machine.
    If you need assistance please refer to the Enterprise Deployment guide.(http://www.adobe.com/devnet/creativesuite/enterprisedeployment.html)
    It should work.
    Regards,
    Abhijit

  • Inspector Document TOC Update now (Greyed out)

    My pages document is currently 108 pages and growing.
    It's in need of TOC but although all my instances of Heading 2 are highlighted when I use the styles disclosure triangle and select "Select all uses of Heading 2" in the Inspector TOC tab, after deselecting every other style apart from Heading 2, the "Update Now" button is greyed out.
    Any ideas, anyone?
    Andy

    Thanks fruhulda.
    I think you were assuming I already had a TOC but my problem was with creating one.
    It wasn't until I re-read the instructions that I noticed you must: Insert > TOC (I thought the 'Update' button would insert it).
    I tried using Insert, and it came up with a message suggesting the Header 2 style was not used in the document, but when I tried again at the beginning of the document, it worked!
    It doesn't matter to me where the TOC is, it's a video script and the TOC is simply for my own use.
    Thanks for your help - not the actual answer, but it led me to it.
    Andy

  • "Update All" Greyed Out On App Store Updates Page

    I have noticed that when I go to the App Store to update Apps, the "Update All" option is greyed out. There is more than one App to update in every case and I end up having to update each individually. However, when I update the first individual App (1st selected not necessarily 1st in list), the "Update All" option becomes available and functional.
    This occurs on iPhone 5s running iOS 7.0.2 and NOT on my iPad 3 running iOS 7.0.2.
    Anyone else notice this and/or have a solution?
    Thank you very much.

    Yes, I have also seen what you have reported. This looks like a bug.
    Report it to Apple at http://www.apple.com/feedback/iphone.html

  • Update button "greyed out" in NSU

    Hi all.
    Hopefully someone can help
    When i try to update to the V20 firmware (using Euro1 code). NSU detects my phone, realises that my fw is V12, and that V20 is available.. However the update button is greyed out!
    any ideas
    thanks in advance
    Noel

    alThor,
    Do you have any transitions leading into or out of the clip with your title in it?
    If so, they'll first need to be removed before you can Update.
    Matt

  • No connection since last update, settings greyed out

    anyone the same problem ?
    i try to connect to any website but there is no loading bar, no error message, just the rotating circle.
    the addon "quit"-button not working anymore and i can't enter the settings, button is greyed out

    Hi,
    some more details:
    two weeks ago i installed the fennec apk 28.0a1 and everything went fine, i started to love mobile firefox.
    there were daily updates without problems except for yesterday. after the update, no connection to any website possible.
    screenshot show firefox in german language but there is not much to see anyway :( i clicked on a bookmark but the address is not showing in the address bar. when i type in a URL manually and tip again on the address bar to edit the address the complete URL will disappear.
    i have deinstalled fennec and reinstalled the 28.0a1 but same problem ...
    i am using SONY stock android 4.1.2 on a XPERIA S

  • All Update options are greyed out in RH11

    Hi.  I just reinstalled TCS5/RH11 to get rid of a missing .xpj file issue.  Then I imported an FM book and created a glossary in RH11.  I then edited my FM book and came back to my RH11 and tried to update the project with the changes in my FM book.  All options of Update are greyed out so basically, I cannot update my RH11 project.  Can someone hear me wail?

    For some reason, the Link > Framemaker document option was also greyed out when I created the project.  I had been having trouble with the .xpj file not being created by RH11 and reinstalled TCS5/RH11.  Then I created the project and was able to find and open the .xpj file.  Like I said, I found then that the  Link > Framemaker document option was greyed out and could only import the FM book.
    I recreated another project and see that the Link >   Framemaker document option is greyed out.  I can only use Link > Word document, which is of no use to me.  Any suggestions would be welcome!

  • Updated mac to maverick and all my files from pages have greyed out and won't open ?

    I use pages and also save a PDF when ive typed a document I updated to Maverick and all my pages and pdfs from before I updated have greyed out and I cannot open them help please

    thank you Eric, but any of those solutions works because on Maverick the options on itunes: "Tap on the Info pane, then De-select the option to Sync Notes" is not longer available.   Also, I have tried all those steps about de-select sync notes on iphone and mac.  I need a solution that consider working on Maverick.

  • PrE 8 'updates' greyed out = can't update!

    I've been having the recent problems with PrE 8 not loading/crashing and want to follow the instructions to update  (An update to Premier Elements is available to resolve crash/quit issues. To install launch Adobe Premiere Elements 8 and go to Help > Updates.)
    My problem is that 'updates' is greyed out and not clickable??!""
    Any hlep appreciated
    Geoff
    PS Driver updates have not worked.

    Someone on this forum mentioned that turning off McAfee solved his problem
    with PE8.  That suggestion is buried somewhere on this forum and I ran across it in desparation after installing PE8 on my girlfriend's computer.
    Hunt (on this forum) recommends one should NEVER use real-time scanning when one is video-editing.  He is right.  Turn it off and don't connect to the net either.   It's best to reboot your computer, turn off the scanning, and close other system tray items (if possible) and then use PE8.
    I would also recommend looking for the PE .EXE (there are two) and making a shortcut to the one that is not that start-up screen.   It's best to go right into the program.
    Cheers,
    Peter

  • Update absence pencil icon greyed out

    Hi,
    I have 12.1.1 installed. On the absence management self service page --> the absences applied have update/delete greyed out.
    This is the case for all statuses, be it submitted or approved or pending approval.
    how can the update pencil icon be enabled?
    this is happening for ESS and MSS
    Thanks
    Aakash

    Okay, so for the benefit of others this request is basically about updating absences in the past, which is currently disallowed in SSHR LOA.
    Enhancement 10194304 is about allowing update for historical absences:
    Bug 10194304: AB_PT:CANNOT UPDATE AN ABSENCE AFTER THE END DATE HAS PASSED IN CONFIRMED STATUS

  • Server 2003 Automatic Update Greyed out

     I have a primary Server 2003 that has the automatic up feature greyed out. I found the group policy setting on the domain controller and changed it with a reboot but it is still greyed out. I also have 3 member servers where the automatic updates are greyed out and can not be change. Does anyone know why the option is greyed out under the administrator account? Any help would be appreciated.

    When an option is greyed out in the user interface this is typically caused by an applied Group Policy Object (GPO)
    Using rsop.msc on the console of your server you can see which Group Policy Object on what level (Local settings, Active Directory Site settings, Active Directory Domain settings, settings from Organizational Units) applies the setting. You can then change the setting in the right Group Policy Object(s).
    More information on running rsop.msc on Windows Server 2003 can be found in Microsoft Knowledgebase article 323276.

Maybe you are looking for