Update, restart, missing files

I just updated to itunes 12 because i have not updated in awhile, after the update, i restarted like it asked, but then when i tried to open itunes it had an error saying there was missing files and it couldn't open and to reinstall itunes, so i went to reinstall itunes and it said a later version of itunes was found. anybody else had this problem? also if you've fixed it, please tell me how.

This has just happened to me, and i am really annoyed ! I update and missing files, has happened to me before and i have un-install and install quicktime and itunes separately. So this, i should never update itunes again ?
Lizz88, what you have to do is locate where the original file/copy is. It is asking that because you moved the file to somewhere else.
For example, if i legally download a song, paste it into my desktop. Open it up with itunes and stick it in my library, then next day i moved it from the desktop, then itunes will ask to re-locate where the song is. So, wherever that song is find it, and locate it
If you deleted the file, then, i am not sure S:
Message was edited by: andRee_ww

Similar Messages

  • HT201210 update has missing file, msvcr80.dll

    Itunes was working fine till Apple requested to update to the latest version.  After it updated to 11.1.4 it now complains about missing file MSVCR80.dll and will not start up.  Is there an older version still avaiable somewhere that I can back up to.

    I read that there are a lot of us having the problem and the cure is the deinstallation and reinstall of the files listed in latter discussion.  It works and I am back with Itunes.  Thanks for the good info.

  • Itunes update problem - missing file?

    I've been trying to install the iTunes version 9.2 update, it doesn't get very far into it before i receive this message:
    The feature you are trying to use is on a network resource that is unavailable.
    Click OK to try again, or enter an alternate path to a folder containing the installation package 'Bonjour64.msi' in the box below.
    Use source: yadayadayada.. (and gives me the option to browse for another source where the stated file is)
    I've looked through every file imaginable (yes, the recycling bin too) and can't seem to find it anywhere! there's another file it says it's missing 'appleapplicationsupport.msi' as far as i'm concerned, i haven't deleted any files related to Apple. I've tried uninstalling the program but it says that it can't because those files are missing, i tried redownloading it from the Apple website - same problem.
    Does anyone know how to fix this problem/have any suggestions? thanks.

    I was having this problem for a while and searched through a number of forums for the answer on how to locate .msi files that I must have accidentally deleted. I needed the .msi files because while attempting to uninstall the Apple Software Update another Apple related program from my Add or Remove Programs list I was getting an error similar to:
    "The feature you are trying to use in on a network resource that is unavailable.
    Click OK to try again, or enter an alternate path to a folder containing the intallation package 'AppleSoftwareUpdate.msi' in the box below."
    I followed these steps in order to locate the .msi and successfully uninstall:
    1. Download the correct version of iTunesSetup.exe. This is the same version that you are attempting to delete on your computer. For me it was iTunes 9.1.1. (It is key that you download the same version you are attempting to remove!)
    2. Install WinRAR: http://download.cnet.com/1770-20_4-0.html?query=winrar&tag=srch&searchtype=downl oads&filterName=platform%3DWindows,Webware&filter=platform%3DWindows,Webware
    3. Run WinRAR and point it at the iTunesSetup.exe you downloaded in step 1. Extract the .exe to a folder.
    4. Go to Add or Remove Programs and attempt to uninstall the broken Apple software.
    5. When the uninstaller asks for the .msi, point it to the .msi file in the folder you extracted to in step 3.
    Voilà! You should be able to successfully uninstall all your broken Apple applications this way, including QuickTime.

  • Can't Update Bios (missing files in official download)

    I still have problem with BSOD on my GS60 2PE Ghost Pro. so I thought I would try and update the BIOS. problem is It seems there are some files missing in the official download. And I try to find information what model my moder board is but there aren't any information anywhere...
    Files in Bios download
    +þ¦+©³ð-BIOS.txt
    E16H2IMS.110
    Flash BIOS by UEFI BIOS Setup Utility.txt
    Thanks in advance!
    /Omen

    Quote from: hchg on 05-December-14, 19:43:25
    The update file isn't for the EFI update, try to follow the update guide below to do the update.
    Update guide(UEFI BIOS Setup Utility): http://www.msi.com/files/pdf/Flash_BIOS_by_UEFI_BIOS_Setup_Utility_en.pdf
    Download link for BIOS(E16H2IMS.110): http://download.msi.com/bos_exe/E16H2IMS.110.zip
    *Don't forget to change the boot mode to Legacy if you're running Windows 7.
    Have you updated any driver which isn't downloaded from MSI website? Try to use the Windows 7 driver downloaded from MSI website and see if the BSOD still remains.
    i have spoken with child.of.omen and it turns out his nvidia gpu is broken :/ which is why his windows is throwing blue screen of death on a nvidia .sys file :/ because even when he run 3DMARK once that software is about to use nvidia gpu bam BSOD happens again so it's defently a gpu failure.
    So flashing his bios wont probably solve his BSOD problem which i do not think it will.

  • Update has missing files and won't start fixed

    not a question, but noticed quite a few people were having trouble with itunes after updating. continuously being told file did not install properly and cites window error 127.
    i followed an idea from from the microsoft community and now it works and doesnt crash when i plug in iphone to system as well.
    unistall everything by apple.inc so itunes, bonjour the update service, everything listed in the change/remove program database as apple
    once done install quicktime player then reinstall itunes, this seems to get rid of the bug
    hope this helps

    not a question, but noticed quite a few people were having trouble with itunes after updating. continuously being told file did not install properly and cites window error 127.
    i followed an idea from from the microsoft community and now it works and doesnt crash when i plug in iphone to system as well.
    unistall everything by apple.inc so itunes, bonjour the update service, everything listed in the change/remove program database as apple
    once done install quicktime player then reinstall itunes, this seems to get rid of the bug
    hope this helps

  • My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but  when reinstalling I get an older version is installed and cannot be removed. I need a soluti

    My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but  when reinstalling I get an older version is installed and cannot be removed. I need a solution.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • TS1368 I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

    I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

    Click here and follow the instructions.
    (98897)

  • Tried to download itunes update - missing file MSVCR80.dll? What is this file

    tried to run iTunes update - missing file message MSVCR80.dll??? Uninstalled iTunes - when i reinstall i get a message at the end that Service "Apple Mobile Device" failed to start.Verify that you have sufficient privileges to start system services??? What do I do now?

    Troubleshooting issues with iTunes for Windows updates - MSVCR80

  • ITunes wont run after update today says missing file msvcr80.dll

    iTunes wont run after update today says missing file msvcr80.dll
    tried to reinstall, nothing changed.

    Check out the user tip below.
    https://discussions.apple.com/docs/DOC-6562

  • HT5654 Missing files after the update

    I am unable to start itunes since the latest update. I keep getting missing files pop up boxes and I have followed the directions and reinstalled - have tried both using the repair function and a the uninstall and reinstall function but nothing has fixed the problem. What do I do now?

    Hi there,
    Earlier iTunes (and supporting applications) need to be completely uninstalled before you can install the new version. Here's the complete Apple info on this: http://support.apple.com/kb/HT1923
    Mobile device application will most likely fail to uninstall, so you would need to visit its location(s) and manually delete the files then folder(s). The location of the folders is documented in this link from Apple.
    It's a pain, but it should work.

  • Tools/Photoshop/Batch no longer available after updating Bridge. Is there a missing file?

    I have just updated all my cc apps, Photoshop, Bridge etc. Being able to batch process files from Bridge is no longer a visible option. Can anyone advise about possible missing files that might enable this?

    Same problem here:
    Bridge batch problem after Photoshop cc 2014 update
    I recently updated all my adobe cc products to the 2014 version. The previous cc version is still on my pc (Windows 7 professional)
    I’ve come across 2 problems since that update:
    All the actions I’ve made in the regular cc version are gone in de updated version. I tried to recover the actions by clicking load actions in the actions panel, and then went searching for them in the actions folder (…\Adobe Photoshop CC\Presets\Actions) of the cc version, but photoshop cc 2014 apparently couldn’t find a compatible file. So, is there a way to import those actions to the cc 2014 version or do I have to remake all those actions?
    I’ve made a new action in Photoshop cc 2014 and tried to batch several images with that action in Bridge. When the cc 2014 is open (or not) a message appears in that version of photoshop stating that photoshop cc is required for this command and that I should close this version and try again. When I open the photoshop cc version before I click on batch in Bridge nothing happens at all.
            Any solutions for this problem?

  • Update of kernel: file in /etc/modprobe.d missing

    That it's missing I know. I tried to apply a fix to the "Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after" by adding a file in /etc/modprobe.d according to some suggestions I found, but it didn't really fixing anything and hence I removed the file.
    Now when updating the kernel it complains each time about that missing file and I can't find any information to why and based on what it still looks for that file. How do I fix this?
    It doesn't affect the system as far as I can see, but the message is annoying and I prefer to clean this little mess up.

    OK, let me show the output of pacman:
    >>> Generating initial ramdisk, using mkinitcpio.  Please wait...
    ==> Building image "default"
    ==> Running command: /sbin/mkinitcpio -k 2.6.28-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
    :: Begin dry run
    :: Parsing hook [base]
    ERROR: file '/etc/modprobe.d/usb-load-ehci-first' does not exist
    :: Parsing hook [udev]
    :: Parsing hook [autodetect]
    :: Parsing hook [pata]
    :: Parsing hook [scsi]
    :: Parsing hook [sata]
    :: Parsing hook [usbinput]
    :: Parsing hook [keymap]
    :: Parsing hook [filesystems]
    :: Generating module dependencies
    :: Generating image '/boot/kernel26.img'...SUCCESS
    ==> SUCCESS
    As can be seen it still after I don't know how many updates look for a file I only once tested. So somewhere it's registered as needed parameter.
    Last edited by KimTjik (2009-02-11 19:45:42)

  • Why often after making updates appears: some files on the server may be missing or incorrect. Clear browser cache and try again.

    Why often after making updates appears: some files on the server may be missing or incorrect. Clear browser cache and try again.

    Hi Gauray
    I can see it well but someone how works at the congress it appears:
    http://www.oeso.org/monaco_conference2015/endorsements.html
    Do you have an updated to clear browser cache automatically in Adobe CC Muse?
    If not, how can I prevent browser cache?
    It is correct if I put in Page Properties for Home Master, in HTML for  ha scritto:
    Why often after making updates appears: some files on the server may be missing or incorrect. Clear browser cache and try again.
    created by Gaurav Sharma in Help with using Adobe Muse CC - View the full discussion
    Hi,
    Could you please provide a URL of the site, so we can check it. Also, take a look to this thread, discussing the same
    Some files on the server may be missing or incorrect
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6767913#6767913
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Help with using Adobe Muse CC by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • I updates my iPad with the latest iOS and despite backing up all the information prior, my iBooks application was deleted along with a hundred important PDFs on it. Is it possible to locate these missing files? Urgently requires assistance. Thank you!

    I updated my iPad with the latest iOS and despite backing up all the information prior via iTunes, my iBooks application was deleted along with a hundred important PDFs on it. Is it possible to locate these missing files? Urgently require assistance. Thank you!

    Hi Sam,
    I understand where you are about being your own IT department, it can be overwhelming ...
    What drives to buy depends an awful lot on how you will use them, what your budget is, and your preferences.
    In the case of your DP Powermac, for online storage used primarily for editing, I would add one or more internal drives first. Look for drives that are at least 7200rpm and have at least an 8MB cache. 10,000rpm/16MB cache is even better, but more expensive. Seagate Barracudas have always been good choices.
    For backup purposes, I'd pick some good external FireWire drives; you can also use these for online editing, lots of people do. Your Mac has both FW400 and FW800 ports - either kind is fine but if you get drives that support both, you would want to connect them to the FW800 port for the added performance.
    In my experience, the Lacie d2 Extreme drives have been very very good. In fact I have 3 of them daisy-chained off my iMac G5 right now and they work flawlessly with FCE. Weibetech and Granite Digital drives are further upscale in performance and price. RAID configurations would be even further upscale. Do stay away from consumer level hard drives, however ... the Western Digital MyBook series & no-name drives come to mind ...
    Don't use a FireWire hub for your external drives, it's just asking for trouble.
    ps. And thanks for your nice comment about me. I'm happy to help, as are other folk in the forum.

  • About Final Cut ProX: why a red line appears at the top o a file imported into a New Event? then when I restarted the Project that files comes as "Missed files" How can i fix it?

    About Final Cut ProX: why a red line appears at the top o a file imported into a New Event? then when I restarted the Project that files comes as "Missed files" How can i fix it? Thank you very much.

    Where are you importing from – a camera or computer? If you are optimizing at import, make sure the background processes are completed. (Command-9)
    Russ

Maybe you are looking for