Update Retriever: flex 2-15d

hello, i have 50 of these flex 2-15d laptops to image, does update retriever have a catalog file for it, because i am not able to find one?
thank you.

muffrider43 wrote:
hello, i have 50 of these flex 2-15d laptops to image, does update retriever have a catalog file for it, because i am not able to find one?
thank you.
Good day and welcome to the community.
Acoording to this document:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/updateretriever_readme_2013-9-3.txt
I don't believe that the Flex laptops are supported in Update Retriever. It's principally a Think system tool.
Regards.
English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Similar Messages

  • Boot Fail after latest BIOS Update on Flex 2-15D

    Hi everyone,
    I have a severe problem (I guess) after the latest BIOS Update. Windows 7 freezes during startup.
    I own a 64-bit Lenovo FLex 2 15D with AMD A6-6310 and R4, 4GB RAM and a SSHD (8GBSSH). I purchased it without OS and installed Windows 7 - which worked fine so far.
    I yesterday updated the BIOS with version 9FCN23WW (for Win7 and Win8), the latest BIOS update. A mistake, it seems.
    After Reboot, I first had to disable Secure Boot in the BIOS, because it would not let me boot at all. I figured out how to get into the BIOS-Setup to disable this (press Enter 2x, press Tab when in the Boot Menu to access the "Apps Menu", then "SETUP" - just in case this helps someone).
    Now Win7 begins to start up, but freezes during the startup process (the splash screen with the win flag freezes and looks a bit strange. I used the "protected mode" Windows Startup and saw that the process always hangs when loading "amdkmpfd.sys".
    That is basically it.I guess I have to find a way to re-install the previous version of the BIOS, but I have no idea how!
    Any idea?!
    Now about what I did to fix this (poor, but I tried):
    If I try to start from a Win7 installation CD-ROM (actually it is one for Dell PCs, but I guess that is not the problem) and press a key to boot from CD, Windows loads files, shows "Starting Windows"  and at a certain point again just freezes. When I -do not- press a key, WIndows Boot Manager shows up and mentions that "Windows failed to start (etc.)" "File: \EFI\Microsoft\Boot\BCD" "An Error occurred while attempting to read the boot configuration data."
    I can't even boot into Linux on a USB stick, because the Windows "Error Recovery" (translated from German, sorry - my guess) won't let me when I try (just offers to boot to Win7 in protected mode - it could be that it fails immediately and jumps back to Win Startup).
    Thank you for every bit of help!
    Tristam
    Solved!
    Go to Solution.

    I found our the solution to my problem with the help of SebastianLenovo ...
    In the BIOS / Boot Mode, I switched back from "UEFI" to "Legacy". That's it. That simple. The BIOS Upgrade routine just did not transfer that setting from the old BIOS to the new.
    Given the fact that 1. I did not change that setting, so it is default and 2. it would have been easy to avoid, if the BIOS update routine would be well programmed to transfer the current BIOS settings to the new, upgraded BIOS ...
    Anyway a strange situation that a 64-bit system has a 32-bit BIOS. Actually no Linux distribution (except FatDog and rescue systems) are able to deal with it - Linux only running as a Virtual Machine under Windows. I think this is inappropriate and really taking away a part of the fun if you can not run this laptop as a dual boot system.
    Thanks to Sebastian and I hope this solution helps someone in the future...
    Regards, Tristam.

  • Lenovo flex 2-15D Miracast

    I am trying to connect to a wireless HDMI adapter.  According to Microsoft I should be able to go to devices and then project and then choose wireless adapter.  I am up to date on windows 8.1
    Does lenovo flex 2-15D Miracast support miracast?

    hi Pathfinder87,
    It's a bit early to tell if the wireless card is malfunctioning (unless this has been an ongoing issue out of the box).
    Things that you can try:
    1. Uninstall and delete the wireless card driver from the Device Manager and in the Control Panel (icon views) > Programs and Features and reboot the machine. When finished, install the stock driver from the D:\Drivers\WLAN folder or try this driver from Intel:
    File name: Wireless_17.16.0_De64.exe
    Version: 17.16.0 (Latest)
    Date: 04/20/2015
    Size: 24.73 MB
    Language: English
    Operating Systems: Windows 8, 64-bit*
    2. Follow this "This device cannot start" Code 10 error in Device Manager in Windows fix (see Manually fix corrupted registry entries).
    3. Try booting in Safe Mode with Networking and see if the problem persist. If wireless card works fine in Safe Mode, consider doing a clean boot and observe the functionality in normal mode.
    3. If you got this problem recently (e.g., after a Windows Update) then you may need to consider rolling back the machine
    How to Do a System Restore in Windows 8 and 8.1
    4. If doing a System Restore doesn't work, consider restoring the machien to factory settings by pressing the Onekey Recovery (Novo) button )note that any data on the system partition will be wiped).
    Regards

  • X230 Family Type 2325 drivers In update retriever

    Hey,
    I've been using UR for quite some time and it's working great for me with SCCM etc.,
    the organization I work for had began purchasing X230 family laptops (Type 2325),
    I'm missing some drivers from Update Retriever that are available on the support website,
    I'm searching for type 2325 language English OS Windows 7
    these are:
    ThinkPad Bluetooth g4wb10ww (Version 6.5.1.2700)  (appears as BCM... In device manager)
    RapidBoot Shield 32/64 (both appear on UR but fails to download while all other drivers successfully download from UR)
    USB3.0 Appears but doesn't seem to get installed (it appears In candidate list log of thininstaller),
    then I read that on the RapidBoot shield update notes that usb 3.0 needs rapidboot drivers v1.23 (which doesn't appear on  the new driver releases page:
    http://support.lenovo.com/en_IL/research/hints-or-tips/detail.page?DocID=HT050904 
    Software name RapidBoot Shield
    Support models ThinkPad(R) L330
    ThinkPad L420, L421, L430
    ThinkPad L520, L530
    ThinkPad T420, T420i, T420s, T420si, T430, T430i, T430s, T430u
    ThinkPad T520, T520i, T530, T530i
    ThinkPad W520, W530
    ThinkPad X1, X1 Hybrid, X1 Carbon
    ThinkPad X121e, X130e, X131e
    ThinkPad X220, X220i, X230, X230i
    ThinkPad X220 Tablet, X220i Tablet, X230 Tablet, X230i Tablet
    ThinkPad V490u
    ThinkPad Edge E120, E125, E130, E135
    ThinkPad Edge E220s
    ThinkPad Edge E320, E325, E330, E335
    ThinkPad Edge E420, E420s, E425, E430, E435
    ThinkPad Edge E520, E525, E530, E535
    ThinkPad Edge S430
    Lenovo(R) V480, V480s
    Lenovo V580
    Lenovo B475e, B480, B480r, B485, B490
    Lenovo B575e, B580, B580r, B585, B590
    Zhaoyang K29, K49, E49
    Lenovo E49
    Operating Systems Microsoft(R) Windows(R) 7 32-bit, 64-bit
    Refer to marketing materials to find out what computer models
    support which Operating Systems.
    Version 1.23
    WHAT THIS PACKAGE DOES
    RapidBoot Shield is a utility that reduces the boot complete time of PC running
    Windows 7 operating systems.
    If this package has been installed, updating (overwrite-installing) this
    package will fix problems, add new functions, or expand functions as noted
    below.
    CHANGES IN THIS RELEASE
    Version 1.23
    [Important updates]
    Nothing.
    [New functions or enhancements]
    - Changed the software name from RapidBoot to RapidBoot Shield.
    [Problem fixes]
    - Fixed an issue that the desktop window becomes dark and mouse is unresponsive
    when SimpleTap is launched during boot time.
    - Fixed an issue that RapidBoot does not work after upgrade install on Win7 64-bit
    operating system.
    - Fixed an issue that mouse cursor intermittently becomes unresponsive for a while.
    - Fixed an issue that RapidBoot delays keyboard response during Lenovo Setup(OOBE).
    - Fixed a 0x9F BSOD issue that occurs intermittently.
    [Note] If you plan to install Intel USB3.0 driver 1.0.4.225 or newer version,
    please install Rapid Boot Shield first.
    from the log(1st run):
    Info 2012-07-01 , 02:32:56
    at Tvsu.Coreq.LoadCoreqsProcessor.ProcessUpdatesImplementation(Update[] ups)
    Message: Candidate list:
    Integrated Camera Driver for Windows[reboot type 3]
    WiDi driver for Intel cards for Windows 7 64bit[reboot type 3]
    ThinkPad Wireless LAN (11b/g/n)[reboot type 0]
    Lenovo Mobile Broadband Activation[reboot type 0]
    WiMAX Driver for Intel Cards (For Windows 7 32bit)[reboot type 3]
    ThinkVantage Active Protection System[reboot type 3]
    Realtek Audio Driver for Windows 7 32/64[reboot type 3]
    ThinkVantage GPS[reboot type 0]
    WiDi driver for Intel cards for Windows 7 32bit[reboot type 3]
    Ericsson H5321 Wireless WAN Driver for Windows[reboot type 0]
    WiMAX Driver for Intel Cards (For Windows 7 64bit)[reboot type 3]
    ThinkPad Power Manager[reboot type 3]
    Intel AMT 8.0 - MEI and SOL driver[reboot type 3]
    ThinkVantage Active Protection System[reboot type 3]
    ThinkPad UNDP Wireless WAN Driver(Gobi3000)[reboot type 3]
    Sierra Wireless MC7750 - Gobi 4000 (TM) Softwaree[reboot type 3]
    Media Card Reader Driver for Windows XP/732/764 - WW -[reboot type 3]
    ThinkPad Power Management Driver[reboot type 3]
    Intel PRO/1000 LAN Adapter Software for Windows XP 32-bit, 7 32-bit[reboot type 0]
    ThinkPad Hotkey Features Integration Package Setup[reboot type 3]
    Fix for Issue of HDD with HDP Detection for Windows Vista/7[reboot type 0]
    ThinkVantage Access Connections for Windows 7[reboot type 3]
    WiFi driver for Intel cards For Windows 7 64bit[reboot type 3]
    Intel USB3.0 eXtensible Host Controller[reboot type 3]
    WiDi Driver for Intel Cards for Windows 7 32/64bit[reboot type 3]
    Intel Rapid Storage AHCI Driver for Windows 32bit[reboot type 3]
    Intel PRO/1000 LAN Adapter Software for Windows 7 64-bit[reboot type 0]
    Intel HD Graphics 2000/2500/3000/4000 Display Driver for Windows 7 64bit[reboot type 3]
    WiFi driver for Intel cards For Windows 7 32bit[reboot type 3]
    Intel Chipset Support for Windows XP/Vista/7[reboot type 3]
    Intel HD Graphics 2000/2500/3000/4000 Display Driver for Windows 7 32bit[reboot type 3]
    ThinkVantage Communications Utility[reboot type 3]
    Info 2012-07-01 , 02:32:56
    at Tvsu.Coreq.LoadCoreqsProcessor.ProcessUpdatesImplementation(Update[] ups)
    Message: Resulted order of candidate list:
    Intel HD Graphics 2000/2500/3000/4000 Display Driver for Windows 7 32bit[reboot type 3]
    Intel Chipset Support for Windows XP/Vista/7[reboot type 3]
    Intel HD Graphics 2000/2500/3000/4000 Display Driver for Windows 7 64bit[reboot type 3]
    Intel PRO/1000 LAN Adapter Software for Windows 7 64-bit[reboot type 0]
    Intel Rapid Storage AHCI Driver for Windows 32bit[reboot type 3]
    Intel USB3.0 eXtensible Host Controller[reboot type 3]
    Fix for Issue of HDD with HDP Detection for Windows Vista/7[reboot type 0]
    Intel PRO/1000 LAN Adapter Software for Windows XP 32-bit, 7 32-bit[reboot type 0]
    Media Card Reader Driver for Windows XP/732/764 - WW -[reboot type 3]
    Sierra Wireless MC7750 - Gobi 4000 (TM) Softwaree[reboot type 3]
    ThinkPad UNDP Wireless WAN Driver(Gobi3000)[reboot type 3]
    ThinkVantage Active Protection System[reboot type 3]
    Intel AMT 8.0 - MEI and SOL driver[reboot type 3]
    Ericsson H5321 Wireless WAN Driver for Windows[reboot type 0]
    ThinkVantage GPS[reboot type 0]
    Realtek Audio Driver for Windows 7 32/64[reboot type 3]
    ThinkVantage Active Protection System[reboot type 3]
    Lenovo Mobile Broadband Activation[reboot type 0]
    ThinkPad Wireless LAN (11b/g/n)[reboot type 0]
    Integrated Camera Driver for Windows[reboot type 3]
    ThinkPad Power Management Driver[reboot type 3]
    ThinkPad Hotkey Features Integration Package Setup[reboot type 3]
    ThinkPad Power Manager[reboot type 3]
    ThinkVantage Access Connections for Windows 7[reboot type 3]
    ThinkVantage Communications Utility[reboot type 3]
    WiFi driver for Intel cards For Windows 7 64bit[reboot type 3]
    WiMAX Driver for Intel Cards (For Windows 7 64bit)[reboot type 3]
    WiFi driver for Intel cards For Windows 7 32bit[reboot type 3]
    WiDi driver for Intel cards for Windows 7 64bit[reboot type 3]
    WiMAX Driver for Intel Cards (For Windows 7 32bit)[reboot type 3]
    WiDi driver for Intel cards for Windows 7 32bit[reboot type 3]
    WiDi Driver for Intel Cards for Windows 7 32/64bit[reboot type 3]
    Info 2012-07-01 , 02:32:56
    at Tvsu.Coreq.CoreqProcessor.ProcessUpdatesImplementation(Update[] updates)
    Message: Beginning Coreq process: Recieved 32Updates
    on the 2nd run:
    WiDi Driver for Intel Cards for Windows 7 32/64bit[reboot type 3]
    WiDi driver for Intel cards for Windows 7 64bit[reboot type 3]
    ThinkVantage Communications Utility[reboot type 3]
    ThinkVantage GPS[reboot type 0]
    Solved!
    Go to Solution.

    Sorry for these issues, the updates team is still working on getting all the updates published for the new systems like X230...
    Bluetooth should be there starting from today.
    I recommend not installing RapidBoot Shield unless you have personally tested it and determined that it makes your image boot faster and doesn't cause side-effects.
    Intel USB 3.0 has a wrong dependency on RapidBoot Shield, the team is working on removing the dependency.  If you are using ThinInstaller you may be able to figure out how to remove the dependency from the XML file yourself...

  • Home Environmen​t - How to set up Update Retriever (UR) and Thin Installer (TI) in a home environmen​t

    Serenityvalley wrote:
    You need to go to This Page and download just about everything on it -espeically the  System Update Deployment Guide and start reading.  It'll take you a few hours to learn what you need to do and implement it if you are familar with editing system registeries and you have some luck and everything goes well.
    You do NOT need to edit registry, just use Thin Installer instead of System Update on the clients. And there is no need to wade thru the deployment guide if you are setting this up in a home environment for just one or two clients.
    Edit: Note that Thin Installer does not run on Vista SP2 (neither does System Update.)
    Here are the few simple things you have to do:
    1. Download Update Retriever (UR) and Thin Installer (TI) from here.
    2. Install UR on one pc and TI on all clients you want to keep updated. UR installs into the Start -- All Programs -- Thinkvantage folder, TI installs into c:\program files\thininstaller.
    3. To initialize Update Retriever:
    a) specify the download folder, pick a place all clients can access. Create a new folder, TI will be confused if there is other stuff in it.
    b) change the settings to Severity -- Optional (assuming you want to see critical, recommended and optional downloads in the list), License -- Do not display and Status -- Active. After clicking next you enter the machine type, the op system and its language for each client you need to keep updated. Note that unless you change status to active everything will download as "test" and thus not be installed by the Thin Installer.
    4. Run the download, about 1 - 1.5GB for the first type, opsys and language combination  and an additional 0.5 - 1GB for each additional type depending on amount of overlap. You can be selective what you download but if you are an average home user -- just download all the items for your type/opsys/language combination(s) -- Thin Installer is a stripped down version of System Update and will decide what to install on the individual client. This is a one-time download, next time you run Update Retriever it will just download new drivers.
    5. To initialize TI on each client, copy the program from the Program Files directory and paste a shortcut to the desktop. Then rightclick on the shortcut and choose Properties, and in the target field of the shortcut tab after "C:\Program Files\ThinInstaller\ThinInstaller.exe" add the following: -repository your_UR_download_directory.
    6. Run the Thin installer on each client, it will perform exactly as System Update did, down to making the same mistakes that System Update did.
    7. As the date is getting close when Windows Update will start distributing Vista SP2 you may want to consider using Microsoft's SPBlockerTools preventing SP2 installation for up to 12 months.
    8. Debugging Tips
    TI ending with message An error occurred while gathering user information is reported when running under Vista SP2 -- TI will not run in SP2. 
    Getting TI to "see" the database downloaded by UR is the main problem. If TI ends with a message saying corrupt or not found database you probably made a spelling mistake in the directory specified in the -repository parameter. If TI ends with a message saying no applicable packages to install it can mean a number of things:
    a) If you are unused to modifying the parameters in a shortcut you may have added -repository to the second field in the shortcut tab instead of the top field labeled Target, the two fields look very similar or you just made a typo in "-repository".
    b) Open UR again and first choose Modify settings on the left and double check that the directory there is the same directory you specified in -repository. Then choose Manage repository -- Update view and double check that all packages have status Active. If they don't it's not necessary to download again, just select all and hit the modify button to change status from Test to Active.
    c) In C:\Program Files\ThinInstaller\logs there are update logs from TI. Open one using Notepad and in edit menu search for the string
    Message: 'Share name' to use:
    This will tell you in which directory TI is searching for the updates. If it can't find a -repository parameter it uses an empty default databse
    d) If you used System Update regularly up to when it stopped working on April 1 and if you have an older model with not so many new driver updates it may actually happen that there are no new updates for your machine (even though you downloaded a lot.) Go to here and enter all fields except model to see what Lenovo shipped after April 1. (Don't click on driver matrices, staying on the downloads and drivers pages will give you a list in chronological order with the ones after April 1 at the top.)  Also  be aware that the database UR downloads from is at least 2 weeks behind when the drivers first become available on the web. Right now, the only new download in the database  applicable to most notebooks after April 1 is the Access Connections 5.22 driver. To check what release you have installed open Access Connections and go to help.
    I just did a clean install of a Vista64 system on my T500 and after installing the first few drivers manually (including drivers for harddisk and ethernet) let Thin Installer install the remaining 36 items for me. The only item left to fix was the known bug in the Ricoh 4 in 1 card driver SU installation. (For a clean install you need to run TI or SU more than once, it doesn't find all drivers the first time.)
    Message Edited by JaneL on 05-08-2009 10:30 PM
    Message Edited by zilla on 2009-05-28 12:48 PM
    T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

    koolzero wrote:
    When I start TI after I pointed it to my repository I get a message that no packages applicable were found.  I did not download all the updates just a few to test it, will it not work unless all updates are downloaded?
    Did you change status from test to active in UR before downloading? If not you can change the downloaded items in the manage repository menu.
    Assuming the items you did download were not already installed on your client with TI it should work.
    Message Edited by zilla on 2009-05-06 10:23 PM
    T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

  • Missing driver in Update Retriever / System Update

    Hi,
    We are missing a driver in Update Retriever for the T540p model:
    The driver is also missing in System Update, when we query Lenovo repository directly.
    Neither is the driver available for download manually on the support page.
    Device 8086:08b2
    "Intel(R) Dual Band Wireless-AC 7260"
    http://pci-ids.ucw.cz/read/PC/8086/08b2
    T540p (20BF-A0FHMD)
    BIOS: GMET59WW (2.07) 2014-02-12
    ECM: GMHT25WW (1.10)
    ME firmware: 9.0.22.1467
    Windows 7 pro SP1, x64
    Lenovo could you please add this driver to Update Retriever?
    Our deployment of this model is pretty much crippled because of this, since we cannot deliver systems without wireless drivers.
    Thank you.

    dhjensen wrote:
    parkerjnc wrote:
    We are half way there. It should show up after the next catalog refresh which I'm expecting to happen overnight. Will check it in the morning and escalate if not showing up.
    I just checked today and still no luck.
    A new version of "ThinkVantage Active Protection System (64bit)" is all i could find for the "3354-Windows 7-English" query
    /Daniel
    I will correct that. We had approved our own "Costum update" with the same update id. After removing that the update appeared as exspected.
    Thank alot for being very helpfull.
    /Daniel

  • [svn] 1531: update the flex-sdk-description to 3.0.1

    Revision: 1531
    Author: [email protected]
    Date: 2008-05-02 08:38:50 -0700 (Fri, 02 May 2008)
    Log Message:
    update the flex-sdk-description to 3.0.1
    update the manifest variables so the versions will be in sync with the description file
    bug: https://bugs.adobe.com/jira/browse/SDK-15416
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-15416
    Modified Paths:
    flex/sdk/branches/3.0.x/build.properties

    Hi,
    Have you tried updating to Flex Builder 3.0.2 and then using Flex SDK 3.5?
    Updates are available here: http://www.adobe.com/support/flex/downloads_updaters.html#flex3
    Alternatively, Flash Builder 4 also provides full support for Flex SDK 3.5.
    Thanks,
    Andrew
    Senior Product Manager, Flash Builder

  • Hotkey package missing from Update Retriever

    Hi,
    I am unable to download (find) Hotkey package in Update Retriever, for deployment of x240 and t440 computers.
    Is that by design or something that can be fixed?

    Hi,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that system update in your Lenovo X240 and T440 is not able to retrieve hotkey integration features.
    Ensure that you have the latest version of Lenovo system update installed. If it didn’t help, I would suggest you to manually download the drivers from Lenovo Support page by entering the MTM number of your machine in the quick path.
    If you find any difficulties, please share the MTM number of your device and the operating system installed.
    Best regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Update Retriever - HelloLevel_8_07_00.xml not existing in SSClientCommon folder

    Hello,
    Yesterday I installed a clean installation of the latest Update Retriever (updateretriever402-2011-07-27.exe) on our server and configured the latest System Update client (systemupdate401-2011-07-25.exe) to connect to it for automatic update retrieval.
    This worked out fine yesterday, client connecting to the internal server and retrieving the updates.
    This morning this does no longer worked, checked the tvsu_log file on the client reveals that this seems to be caused by the a file named HelloLevel_8_07_00.xml not existing in the SSClientCommon folder on the internal update retriever server. 
    Checking the content of the target dir on the internal server does indeed show that that file is not present, others are.
    Please advice as to what the reason and solution can be.
    Thanks.
    *** Partial content of the clients' tvsu_log file ***
    Info 2011-08-17 , 11:44:16
     at Tvsu.Engine.Process.HelloProcess.Start()
     Message: HelloProcess Started
    Info 2011-08-17 , 11:44:16
     at Tvsu.Engine.Process.HelloProcess.Start()
     Message: Client level: HelloLevel_8_07_00
    Info 2011-08-17 , 11:44:16
     at Tvsu.Engine.Process.HelloProcess.DownloadUDF(String helloClientLevel)
     Message: The UDF will be downloaded from: S:\Lenovo\TVSU_Repository\SSClientCommon/HelloLevel_8_07_00.xml
    Info 2011-08-17 , 11:44:16
     at Tvsu.Engine.Process.HelloProcess.DownloadUDF(String helloClientLevel)
     Message: The UDF will be downloaded to-> C:\Program Files (x86)\Lenovo\System Update\session\system\SSClientCommon\HelloLevel_8_07_00.xml
    Info 2011-08-17 , 11:44:16
     at Tvsu.Gui.CustomComponents.Step.set_Image(StepImage value)
     Message: Setting PROCESSING status.
    Info 2011-08-17 , 11:44:16
     at Tvsu.FileDownloader.LocalDownload.Init(FileDownloadInfo fileInfo, downloadingDelegate downDelegate)
     Message: Failed to find the file from server: S:\Lenovo\TVSU_Repository\SSClientCommon/HelloLevel_8_07_00.xml
    Info 2011-08-17 , 11:44:16
     at Tvsu.FileDownloader.LocalDownload.Init(FileDownloadInfo fileInfo, downloadingDelegate downDelegate)
     Message: some error were found in LocalDownload.Init function
     Exception:
      Message: the file does not exist int the server path
      Type: System.Exception
         at Tvsu.FileDownloader.LocalDownload.Init(FileDownloadInfo fileInfo, downloadingDelegate downDelegate)
    *** Content of the SSClientCommon folder on the internal update retriever server ***
    26/04/2011  10:29                97 HelloLevel_8_00_00.xml
    11/08/2011  15:37             1.267 HelloLevel_8_00_00L.xml
    26/04/2011  10:29                97 HelloLevel_8_00_01.xml
    11/08/2011  15:37             1.266 HelloLevel_8_00_02.xml
    11/08/2011  15:37             1.266 HelloLevel_8_00_03.xml
    11/08/2011  15:37             1.266 HelloLevel_8_00_04.xml
    11/08/2011  15:37             1.266 HelloLevel_8_00_05.xml
    11/08/2011  15:37             1.266 HelloLevel_8_00_06.xml
    11/08/2011  15:39             1.266 HelloLevel_8_01_00.xml
    11/08/2011  15:39             1.125 HelloLevel_8_02_03.xml
    11/08/2011  15:39             1.125 HelloLevel_8_02_04.xml
    11/08/2011  15:39             1.125 HelloLevel_8_03_01.xml
    11/08/2011  15:39             1.125 HelloLevel_8_04_00.xml
    11/08/2011  15:39             1.125 HelloLevel_8_04_01.xml
    11/08/2011  15:39             1.126 HelloLevel_8_04_01D.xml
    11/08/2011  15:39             1.126 HelloLevel_8_04_01L.xml
    11/08/2011  15:39             1.125 HelloLevel_8_04_02.xml
    11/08/2011  15:41             1.125 HelloLevel_8_05_00.xml
    11/08/2011  15:41             1.126 HelloLevel_8_05_00A.xml
    11/08/2011  15:41             1.126 HelloLevel_8_05_00R.xml
    11/08/2011  15:41             1.125 HelloLevel_8_05_10.xml
    11/08/2011  15:41             1.125 HelloLevel_8_05_20.xml
    11/08/2011  15:41             1.125 HelloLevel_8_05_40.xml
    11/08/2011  15:41             1.125 HelloLevel_8_05_50.xml
    11/08/2011  15:41             1.125 HelloLevel_8_05_60.xml
    11/08/2011  15:41             1.125 HelloLevel_8_05_70.xml
    11/08/2011  15:41             1.127 HelloLevel_8_05_80.xml
    11/08/2011  15:43             1.129 HelloLevel_8_05_80_314.xml
    11/08/2011  15:44             1.127 HelloLevel_8_05_81.xml
    11/08/2011  15:44             1.127 HelloLevel_8_05_90.xml
    11/08/2011  15:42             1.127 HelloLevel_8_05_91.xml
    11/08/2011  15:45             1.319 SSClientCommon_7_00_0.xml
    11/08/2011  15:45             1.319 SSClientCommon_7_00_1.xml
    11/08/2011  15:45             1.321 SSClientCommon_7_00_10.xml
    11/08/2011  15:45             1.321 SSClientCommon_7_00_11.xml
    11/08/2011  15:45             1.319 SSClientCommon_7_00_5.xml
    11/08/2011  15:45             1.319 SSClientCommon_7_00_6.xml

    Hi ,
    Does your issue been fixed? if not, maybe you can post the full log so that  I can have a look to see if I can provide some advises,thanks.

  • Update Retriever Update dont show anymore, they gone missing?

    Hey All,
    for some reason I cant see a single update in Update Retriever anymore..
    What to do?

    Heres the status of the the driver from XML file:
     <Package id="83de32ww" name="NVIDEO4200_OPT64" description="ThinkPad Video Features [NVIDIA NVS 4200M and Quadro 1000M/2000M Optimus] for Windows 7 64">
      <FileName>83de32ww_2_.xml</FileName>
      <Version>8.17.12.6696/8.15.10.2321</Version>
      <ReleaseDate>3/30/2011</ReleaseDate>
      <Size>400125632</Size>
      <URL>://download.lenovo.com/ibmdl/pub/ibmdl/pub/pc/pccbbs/mobiles/</URL>
      <Mode />
      <Type>Quest</Type>
      <Status>Active</Status>
      <PreviousStatus>None</PreviousStatus>
      <LocalPath>\83de32ww\83de32ww_2_.xml</LocalPath>
      <Severity>Optional</Severity>
      <DisplayLicense>NotDisplay</DisplayLicense>
    - <SystemCompatibility>
      <System mtm="4236" os="Windows 7" oslang="EN" />
    <<System mtm="4239" os="Windows 7" oslang="EN" />
    AAnd here is the command to install the drives via Thininstall:
    ThinInstaller.exe /CM -search A -action INSTALL -noicon -includerebootpackages 1,2,3,4 -repository C:\lenovo_updates

  • Update Retriever - Missing Intel Management Engine Interface Driver for Lenovo Twist (334725RU)

    I am left with two unknown devices in Device Manager. It appears to be the Intel Management Engine Interface Driver, which is unavailable in Update Retriever. I see it on the website as gars04ww.exe.
    Please add this to the repository.
    Thanks,
    Hans
    Hans Lima

    The other one is the Realtec Card Reader gaxm05ww.exe
    Hans Lima

  • Update Retriever cannot retrieve because of missing files

    Hello,
    I'm working a while now with Update Retriever to ease deployment of about 40 ThinkPads and a few ThinkStations. The bugs already found and documented in this forum can be worked around mostly - sometimes you have to redownload the whole repository.
    But there are some updates the UR fails to retrieve and it won't ever retrieve them properly because files are referenced but missing on Lenovo's servers.
    What hurts us most at the moment is that we cannot roll out new Access Connection 5.12 for Vista, because the file 7vcv85wj.txt is missing and UR won't continue without it. With 5.02 being severely broken on Vista this means we may have bet on the wrong horse with TVSU and UR for getting TV-Software on our Lenovos.
    Does anybody know how to get UR to work with Lenovo's repositories? If not - is there an alternative to UR short of letting all our Thinkpads download directly over the Internet (which also hurts me, because the content - transferred via SSL is not cacheable)
    Update: Forgot that - Maybe there is a channel to report such errors - but I didn't find a clue on Lenovo's support site.
    Message Edited by hel on 02-10-2009 02:10 PM

    it's becoming more and it's becoming annoying.
    Here's more failed packages: * Conexant Audio Features II
        name="AUDIOC_WXP" version="3.54.0.51"
           https://download.boulder.ibm.com/ibmdl/pub/pc/pccbbs/mobiles/7wa109ww.txt
           https://download.boulder.ibm.com/ibmdl/pub/pc/pccbbs/mobiles/7wa109wj.txt
         * interestingly these files were already downloaded - nonetheless UR fails to import with error 404
    (Update 2009-02-19: the broken package count went down to 1 for me - that's better)
    Message Edited by hel on 02-19-2009 10:46 AM

  • Update Retriever failed to download AHCI Driver

    Update Retriever is currently failing to download "Intel Rapid Storage AHCI Driver - 8 [64]" version 12.8.0.1016 with package name IMSM64_G4IO.
    Solved!
    Go to Solution.

    Hmm..I've seen this error many times before with various updates and it eventually goes away so I thought this was no different, but maybe it is.  As far as an error message goes I've never seen a good error message when this happens.  It just says "The following updates failed to be downloaded" and it lists them.  I just realized when I search for updates it says the new version is actually the same version as the existing version.  The only difference is in the name.  I'm wondering if I should just delete the old one and try to update again.  I doubt it matters, but here are the names:
    old - Intel Rapid Storage AHCI Driver 7/8 [64]
    new - Intel Rapid Storage AHCI Driver 8 [64]

  • Update Retriever - Error Downloading Power Management Driver

    There is an error in Update Retriever, when I try to download the Lenovo Power Management Driver 1.67.00.02 (giku06ww).
    The error message is:
    1 update failed to be downloaded.
    For me it looks like the XML file does not contain a valid CRC information for the file.

    Found a workaround: (I am not sure, why the CRCs are incorrect. It is possible, that the current driver is compromised!)
    download manually the files for the power management driver:
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/giku06ww.exe
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/giku06ww.txt
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/giku06ww_2_.xml
    There is an error in the XML file, the CRC sum and file size is not correct. calculate the SHA1 CRCs for the files and change the sizes:
          <File>
            <Name>giku06ww.exe</Name>
            <CRC>C9803CFF3B6A8A096AAED2737FB6D6FD3B63B5CA</CRC>
            <Size>1278493</Size>
          </File>
        </Installer>
        <Readme default="EN">
          <File id="EN">
            <Name>giku06ww.txt</Name>
            <CRC>80B709F72A4A9BDA3A0A98A31CD58EE188E412B9</CRC>
            <Size>32128</Size>
          </File>
    the file should look like this:
    <?xml version="1.0" encoding="utf-8"?>
    <?pcdDescriptor version="0230"?>
    <Package name="IBMPM_W8" id="giku06ww" version="1.67.00.02" hide="False">
      <Title default="EN">
        <Desc id="EN">Lenovo Power Management Driver - XP [32]/Vista/7/8 [32,64]</Desc>
      </Title>
      <DetectVersion type="Registry">
        <Registry>
          <Key>HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Power Management Driver</Key>
          <ValueName>DisplayVersion</ValueName>
        </Registry>
      </DetectVersion>
      <Summary default="EN" />
      <Severity type="3" />
      <SeverityOverride type="2">
        <Not>
          <_RegistryKey>
            <Key>HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Power Management Driver</Key>
          </_RegistryKey>
        </Not>
      </SeverityOverride>
      <Vendor>Lenovo</Vendor>
      <ExtractCommand>giku06ww.exe /VERYSILENT /DIR=%PACKAGEPATH% /EXTRACT="YES"</ExtractCommand>
      <ReleaseDate>2013-06-19</ReleaseDate>
      <DiskSpaceNeeded>30000000</DiskSpaceNeeded>
      <Reboot type="3" />
      <Install rc="0" type="cmd" default="EN">
        <Cmdline id="EN">%PACKAGEPATH%\Setup.exe -S -SMS</Cmdline>
      </Install>
      <ManualInstall type="cmd" default="EN">
        <Cmdline id="EN">%PACKAGEPATH%\Setup.exe</Cmdline>
      </ManualInstall>
      <Uninstall />
      <DetectInstall>
        <_RegistryKeyValue type="REG_SZ">
          <Key>HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Power Management Driver</Key>
          <KeyName>DisplayVersion</KeyName>
          <Version>1.67.00.02^</Version>
        </_RegistryKeyValue>
      </DetectInstall>
      <Dependencies>
        <And>
          <_OS>
            <OS>VS-BUS.*</OS>
            <OS>VS-ENT.*</OS>
            <OS>VS-HOMEBASIC.*</OS>
            <OS>VS-HOMEPREM.*</OS>
            <OS>VS-HOMEULT.*</OS>
            <OS>WIN7-ENT.*</OS>
            <OS>WIN7-HOMEBASIC.*</OS>
            <OS>WIN7-HOMEPREM.*</OS>
            <OS>WIN7-PRO.*</OS>
            <OS>WIN7-STARTER.*</OS>
            <OS>WIN7-ULT.*</OS>
            <OS>WIN8.*</OS>
            <OS>WIN8-ENT.*</OS>
            <OS>WIN8-PRO.*</OS>
            <OS>WXP-PRO.SP3</OS>
          </_OS>
          <Or>
            <_PnPID><![CDATA[*IBM0055]]></_PnPID>
            <_PnPID><![CDATA[*IBM0068]]></_PnPID>
            <_PnPID><![CDATA[*LEN0068]]></_PnPID>
            <_PnPID><![CDATA[*LEN0168]]></_PnPID>
          </Or>
          <Or>
            <Or>
              <Not>
                <_Bios>
                  <Level>GDET*</Level>
                </_Bios>
              </Not>
            </Or>
            <Or>
              <And>
                <_Bios>
                  <Level>GDET*</Level>
                </_Bios>
                <Or>
                  <_Coreq name="BIOS_GDUJ">
                    <Version>1.07.1.07^</Version>
                  </_Coreq>
                  <Not>
                    <_Bios>
                      <Level>GDET0*</Level>
                      <Level>GDET1*</Level>
                      <Level>GDET2*</Level>
                      <Level>GDET30*</Level>
                      <Level>GDET31*</Level>
                      <Level>GDET32*</Level>
                      <Level>GDET33*</Level>
                      <Level>GDET34*</Level>
                      <Level>GDET35*</Level>
                      <Level>GDET36*</Level>
                    </_Bios>
                  </Not>
                </Or>
              </And>
            </Or>
          </Or>
        </And>
      </Dependencies>
      <Files>
        <Installer>
          <File>
            <Name>giku06ww.exe</Name>
            <CRC>C9803CFF3B6A8A096AAED2737FB6D6FD3B63B5CA</CRC>
            <Size>1278493</Size>
          </File>
        </Installer>
        <Readme default="EN">
          <File id="EN">
            <Name>giku06ww.txt</Name>
            <CRC>80B709F72A4A9BDA3A0A98A31CD58EE188E412B9</CRC>
            <Size>32128</Size>
          </File>
        </Readme>
      </Files>
    </Package>
    The update can be imported into update retriever manually and it must be assigned to systems (by default no machine types are assigned).

  • Update retriever not always latest driver

    I have noticed lately that Update Retriever is not pulling the latest driver from the Lenovo website.
    I specifically noticed this with the query 3437/win8 updates. It doesn't pull the RealTek High Definition Audio Driver version 6.0.1.7040.  Is there a delay or should it pull the latest available as soon as it is available on the support website?
    Solved!
    Go to Solution.

    There is a delay.  Content available through Update Retriever is the same content available through System Update.  There is additional work that has to be done to create a package descriptor so System Update or ThinInstaller know how to install the update and detect when it is applicable.  Then various scenarios have to be tested across various supported devices.  Usually there is at least 2 weeks delay.  We sometimes find issues with installing the update using System Update or Thin Installer and the delay is longer.

Maybe you are looking for

  • Path Selection Tool issues

    After reading up on some of the problems people are having with the path/shape changes in CC 2014, I haven't seen an exact mention of the problem I am having so here I am. 2 part problem really: 1. When using the Path Selection Tool or Direct Selecti

  • Error in uploading CSV (comma delimited) to database!!!!

    Hello, I'm karthik. We have a application with 10g database and we're using Ms-office 2007 in Windows XP system. While uploading csv files in Ms- office 2007 format it is good in uploading files to database. Most of our systems are upgraded to window

  • PDF download in 3.1 fails with "could not open" error

    Just created a couple interactive reports and was truly dazzled by the functionality. But when I try to download to PDF, Acrobat Reader 8.1.1 errors with msg "... could not open <file> because it's either not a supported file type or because the file

  • IPhone unknown error (-200)

    Hello Apple. When I try to open up iTunes in my MacBook Pro, it says that it cannot launch because of a unknown error called -200. I don't know what this is, and I don't think that there are any solution articles for this error. Here's a screenshot:

  • Changing text tone.

    Hey there, i am new ios. I just got my iphone 5 few days ago. After being with android for about 4 years. i just figured out how to change the ringtone and now i wanted to know how to i change the text tone. I want to make my own. Is this even possib