Update Rollup 6/7 for Exchange Server 2010 SP2

Our config :
Version 14.2 (Build 247.5)
2 Mailbox servers (DAG), 2 CAS/HUB Servers using a NLB, 2 edge
my question is the following:
can i go directly to rullp 7 without installing 2,4, 5, 6 or I have to install all rollup ?
and what's the bests practices for installing rollup ?

Hello,
You can install rollup 7 directly without installing rollup 2,4, 5, 6.
You should install rollup 7 on your Exchange 2010 server roles in the following order: Client Access/ Hub Transport ,Mailbox and Edge Transport.
Please refer to the following article to install rollup 7 on CAS Array Members. (Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does
not guarantee the accuracy of this information.)
http://exchangeserverpro.com/how-to-install-updates-on-exchange-server-2010-cas-arrays/
Please refer to the following steps to install rollup 7 on Database Availability Group Members.
=============================================================
1. Run the StartDagServerMaintenance.ps1 script on the server being updated.
2. Install the update rollup .
3. Run the StopDagServerMaintenance.ps1 script .
4. Re-balance the DAG, as needed .
Here is the article for your reference.
http://technet.microsoft.com/en-us/library/ee861125(v=exchg.141).aspx
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

Similar Messages

Microsoft Exchange Server 2010 SP3 update to Update Rollup 8-v2 for Exchange Server 2010 SP3

i have Microsoft Exchange Server 2010 SP3 and i would like to update to Update Rollup 8-v2 for Exchange Server 2010 SP3.
what is the best way to do so?
my current env:
Name : xxxxxxxx
Edition : Standard
AdminDisplayVersion : Version 14.3 (Build 123.4)
ServerRole : Mailbox, HubTransport
Site : domain/Configuration/Sites/xxx
Name : yyyyyyyy
Edition : Standard
AdminDisplayVersion : Version 14.3 (Build 123.4)
ServerRole : Mailbox, ClientAccess, HubTransport
Site : domain/Configuration/Sites/yyy
Name : cccccccc
Edition : Standard
AdminDisplayVersion : Version 14.3 (Build 123.4)
ServerRole : Mailbox, ClientAccess, HubTransport
Site : domain/Configuration/Sites/ccc
Name : dddddddd
Edition : Standard
AdminDisplayVersion : Version 14.3 (Build 123.4)
ServerRole : ClientAccess
Site : domain/Configuration/Sites/ddd
Name : iiiiiiii
Edition : Standard
AdminDisplayVersion : Version 14.3 (Build 123.4)
ServerRole : Mailbox, ClientAccess, HubTransport
Site : domain/Configuration/Sites/iii
thanks
Mayson

Consider referring to the articles below and that explains it all.
Install the Latest Update Rollup for Exchange 2010 - https://technet.microsoft.com/en-us/library/ff637981.aspx
Applying Service Pack and Rollup Updates on Exchange Server 2010 (Part 1) - http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/applying-service-pack-and-rollup-updates-exchange-server-2010-part1.html
Pavan Maganti ~ ( Exchange | 2003/2007/2010/E15(2013)) ~~ Please remember to click “Vote As Helpful" if it really helps and "Mark as Answer” if it answers your question, “Unmark as Answer” if a marked post does not actually answer your
question. ~~ This Information is provided is "AS IS" and confers NO Rights!!

Exchange 2010 Mailbox automapping issues after updated to Rollup 5 for Exchange Server 2010 SP3

Hi,
i have problem with Outlook Uses who have Full Access on other mailbox.
An authentication window pop up very time a user start Outlook.
If i remove the access everything is ok.
if i insert manual the mailbox everything is ok
The System was for 3 days ago updated to Rollup 5 for Exchange Server 2010 SP3
Before the update, was no issue.
i will appreciated any help
Thanks

Same issue here. Ever since we installed Update Rollup 5 for SP3 Exchange 2010 mailboxes that were auto mapped are not accessible. They all get the same error.
Cannot expand the folder. The set of folders cannot be opened. The attempt to log on to the Microsoft Exchange has failed.
What I have been doing is removing the users permission, then adding them back using the noautomap switch in Powershell. After doing that, the user manually adds the mailbox and all is well.
Just a note here, I suspect it may have something to do with the version of Outlook 2010. We are running an older version here. I think only SP1 with no other incremental updates. Office is up to SP2. Also, one of the users I was working with could not access
the mailbox no matter what we tried but she can walk over to another workstation and open Outlook and access the very same mailbox so that pretty much proves its software related particularly with Outlook.
I cannot reproduce the problem on a workstation (XP) with a newer version of Outlook.
This has been wearing me out and I suspected the Update Rollup all long. Now I am confident as others are having the same problem. If you find out anything on how to fix this other than the steps above, let me know.

Installing Update Rollup 7 for Exchange Server 2010 SP3

Hi,
I have 4 Exchange servers. Two CAS and two DAG. I am currently on Rollup 2 for Exchange Server 3010 SP 3. Can I install Update Rollup 7 for Exchange Server 2010 SP3 or do I need to install a previous one first?
Thannks!
Wave~Chaser

Hi,
When I try to install Exchange 2010 SP3 roll up 7, am getting the below error:
The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may
be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade.
and please find below event log:
Product: Microsoft Exchange Server - Update '{A93DA06F-A5B8-4DF8-8B3F-B285E014C659}' could not be installed. Error code 1642. Windows Installer can create logs to help troubleshoot issues with installing software packages. Use the following link for instructions
on turning on logging support.
Can you please help me with this error.
Thanks

Exchange 2010 update after Update Rollup 5 for Exchange Server 2010 (KB2407113)

Mine exchange server 2010 standard has Update Rollup 5 for Exchange Server 2010 (KB2407113) as latest update.
Can someone help me which update i can install after this, can i start with
Update Rollup 1 for Exchange Server 2010 SP1.
Many thanks in advance

My recommendation will be:
Remove update roll-up 5
Install SP1 check that everything is working
Install SP2 check that everything is working
Install SP3 check that everything is working
I think it will be risky for you to go straight to SP3.
Exchange Blog:
www.ntweekly.com
MCSA, MCSE, MCITP:SA, MCITP:EA, MCITP:Enterprise Messaging Administrator 2010,MCTS:Virtualization

Any known issue reported for "Rollup 8 for Exchange Server 2010 Service Pack 2"

Hello,
Currently our servers are running with "Exchange 2010 SP2 RU7", we are planning to update the Rollup version to RU8 for SP2.
Is there any knows issues reported for "Rollup 8 for Exchange Server 2010 Service Pack 2" till now ? is it safe to update the RU8 ?
http://www.microsoft.com/en-us/download/details.aspx?id=41394

(1) I had to roll it back:
The rollup released Tuesday the 9th caused random problems with systems ranging from general slow down to operation failed errors. It didn’t impact everyone at once and seemed to take 48hrs for everyone to have a problem. Rolling
back the update and rebooting the server seemed to resolve the issue.
Issues reported before the general mailflow stopping for everyone:
Nothing major … an occasional operation failed when I hit send but, it will go thru after I hit the send button a couple of times.
A MICROSOFT OUTLOOK BOX APPEARS WITH A TRIANGLE WITH A ! INSIDE IT. THE MESSAGE SAYS THE OPERATION FAILED.
(2)
ANOTHER CODE APPEARED WHEN I TRIED TO SEND THIS E-MAIL SO I CLOSED OUTLOOK AND RE-STARTED OUTLOOK. THE MESSAGE READ, CANNOT CREATE THE E-MAIL MESSAGE BECAUSE A DATA FILE TO SEND AND RECEIVE MESSAGE CANNOT BE FOUND. CHECK YOUR SETTINGS IN THIS MICROSOFT
OUTLOOK PROFILE. IN MICROSOFT WINDOWS, CLICK CONTROL PANEL.CLICK USER ACCOUNTS AND THEN CLICK MAIL. CLICK SHOW PROFILE, AND THEN CLICK PROPERTIES.
When he tries to open an e-mail, he gets an error message.
If he tries to mark an e-mail unread, he gets a different message.
Thanks Ben

Uninstall Rollup 4 for Exchange Server 2010

When one of our CAS servers got patched they installed Rollup 4 for Exchange Server 2010 SP3.
Is it ok to unintall the Rollup 4 update? I am not able to update other servers for another month and I need all servers to have the same build.

Hi dirkbucket,
Yes you can go ahead and uninstall the rollup from the exchange server that got installed. This will not result any impact. Once uninstalled please perform complete reboot.
As uninstallation of patches is applicable till Exchange 2010 version on getting them reverted.
"To remove Update Rollup 3 for Exchange Server 2010 RTM, use Add or Remove Programs in
Control Panel. Then, remove update 981401."
Find the url for ref: http://support.microsoft.com/kb/981401/en-us
In Exchange 2013 you will not able to perform reverting of CU other than rebuilding it :(
Exchange Queries

Exchange server 2010 sp2 slow issue

My Exchange server 2010 sp2 performance very slow in morning time 9 to 10 AM and evening time 4 to 5 pm only and other time working fine

Hello,
Forums for Exchange versions prior to Exchange 2013 are over here:
http://social.technet.microsoft.com/Forums/exchange/en-US/home?category=exchangeserverlegacy&filter=alltypes&sort=lastpostdesc
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

IOS 5.1.1 and MS Exchange server 2010 SP2 Rollup 2 compatibility

Hello to the community,
Microsoft Exchange Server updated to a new version 2010 SP2 Rollup 2 so I would like to know if iOS 5.1.1 (9B206) is fully compatible with it. We run the 2010 SP1 Rollup 5 of MS Exchange Server.
Thanks in advance.

That is not how i read your problem. It sounded like propagating to Exchange was fine, but changes from Exchange did not get updated in Unity Connection right away. My symptoms were that the voicemail message arrived in Outlook immediately. If I read it or deleted from the phone, then Outlook reflected that right away too. But if I read it or deleted it in Outlook, it took awhile for the phone MWI to go off. In fact, when I just read it, I'm not sure it ever went off, but when I deleted it, it eventually went off.
We have our voice servers (including Unity Connection), sitting behind Cisco ASA firewalls. We allow all traffic outbound from the voice servers, but restrict it coming inbound. I have a server group for the Exchange servers that allows any port through. I did not remember to add the new Exchange 2010 servers to this group. TCP port 7080 appears to be the only port used. I do not know how the voicemail eventually got deleted in Unity before, unless it eventually came from one of the Exchange 2007 servers. But I definitely saw port 7080 getting blocked, and once we opened it up, the updates from Exchange to Unity happened within seconds.

Regarding MSExchange Active Manager perfmon counter for exchange server 2010 sp1

Hi
Instance for MSExchange Active Manager perfmon counter is not created on Exchange Server 2010 SP1 but for MSExchange Active Manager Client and MSExchange Active Manager Server instances are created.
Will any can tell me why i am not getting any instance for MSExchange Active Manager on Exchange Server 2010 SP1.
Thanks
Sandeep Gupta
Sandeep Gupta

We are getting the below error on HUB/CAS server past 4 days continuosly.
Event ID- 106
Source - MSExchange Common
Description -
Performance counter updating error. Counter name is Unique servers queried, category name is MSExchange Active Manager Client. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not
a custom counter, it has to be initialized as ReadOnly. at System.Diagnostics.PerformanceCounter.Initialize() at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value) at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 5264 is not running. at System.Diagnostics.Process.GetProcessById(Int32 processId, String machineName) at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Processes running while Performance counter failed to update: 984 svchost 2952 rotatelogs 2360 conhost 6296 WmiPrvSE 1372 NSClient++ 564 lsass 8036 powershell 2944 cmd 2352 cmd 1896 exfba 25748 conhost 7076 store 2936 rotatelogs 372 csrss 10024 fscvsswriter
1552 rotatelogs 8436 MSExchangeTransport 2928 cmd 4304 msexchangerepl 1544 FSCMonitor 164 svchost 556 services 6264 beremote 2524 Exclaimer.Connectors.MailRules.ExchangeUpdateService 1108 bedbg 4492 FSCController 748 svchost 4964 WmiPrvSE 9972 svchost 4484
MSExchangeMailboxReplication 1724 inetinfo 5872 MSExchangeTransportLogSearch 2116 cpqnimgt 34620 conhost 5660 MSExchangeThrottling 7432 FSCScheduledScanner 4720 WmiPrvSE 928 svchost 1852 WmiPrvSE 1516 FSCEventing 1980 SMSvcHost 11804 svchost 3876 Microsoft.Exchange.EdgeSyncSvc
5252 Microsoft.Exchange.Search.ExSearch 10176 w3wp 1704 hpwmistor 9764 svchost 2684 Microsoft.Exchange.AntispamUpdateSvc 516 winlogon 10956 MonitoringHost 2088 svchost 2480 conhost 9852 FSEMailPickup 2280 cqmgstor 1884 cmd 1684 sysdown 1288 vcagent 672 svchost
1088 svchost 8572 FSCTransportScanner 6404 w3wp 4236 FSCTransportScanner 11936 MonitoringHost 8568 conhost 2460 rotatelogs 4428 Microsoft.Exchange.RpcClientAccess.Service 880 svchost 4716 Microsoft.Exchange.Pop3 7376 FSCRealtimeScanner 480 svchost 8556 EdgeTransport
4024 MsExchangeFDS 2248 cqmgserv 840 svchost 276 smss 1260 w3wp 9728 svchost 7328 FSCRealtimeScanner 3028 hpsmhd 4080 FSCConfigurationServer 34088 TrustedInstaller 8088 w3wp 1052 spoolsv 1248 cpqrcmc 4836 conhost 9320 w3wp 7544 taskeng 5376 Microsoft.Exchange.ServiceHost
1632 svchost 1628 snmp 7536 FSCRealtimeScanner 836 FSCTransportScanner 1032 conhost 1228 cissesrv 8712 FSCTransportScanner 15700 cmd 436 wininit 828 LogonUI 1812 smhstart 2400 hpsmhd 428 csrss 21176 w3wp 13032 Microsoft.Exchange.Monitoring 6520 mad 4800 MSExchangeMailSubmission
4360 Microsoft.Exchange.Pop3Service 8944 FSEContentScanner64 1932 msftesql 6324 w3wp 4216 cqmghost 572 lsm 8764 powershell 1592 HealthService 4152 MSExchangeMailboxAssistants 2304 Exclaimer.PolicyProcessingEngine.RemoteDeploymentService 9944 svchost 2572 Microsoft.Exchange.AddressBook.Service
2492 cmd 1388 Exclaimer.PolicyProcessingEngine.ConfigurationService 1780 MSExchangeADTopologyService 4536 Microsoft.Exchange.ProtectedServiceHost 4 System 11844 msdtc 7488 FSCRealtimeScanner 7520 WmiPrvSE 0 Idle Performance Counters Layout information: FileMappingNotFoundException
for category MSExchange Active Manager Client : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name : Global\netfxcustomperfcounters.1.0msexchange active manager client at Microsoft.Exchange.Diagnostics.FileMapping.OpenFileMapping(String
name, Boolean writable) at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable) at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable) at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String
categoryName)
Same error is coming for diffrent performance counter as well like ..MSExchange Throttling, MSExchange Middle-Tier Storage, MSExchange ResourceHealth.
Could some one help me on the same.
Above steps can be follow to avoid this error???
Thanks in Advance.

Groupware Connector 5.0 for Exchange server 2010

Hello All,
We are looking for some documentation on CRM groupware integration with Exchange server 2010.
Groupware Connector 5.0
SAP just release note 1595564 to update the groupware connector to work
with Exchange 2010. Are there updated Groupware Connector Installation
and Adminisration guides for the new Connector 5.0?
We would appreciate if someone could add more information on how we can integrate both.
Thanks in Advance!

Dear Kiran,
Check note 1642681 very help full.
regard ,
vijay.

Send As, Send on Behalf and Full Access for Exchange server 2010/2013

[This FAQ contains 2 parts]
Testing and watching the behavior of Send As, Send On Behalf and Full Access permission.
Common issue and Troubleshooting on the three permission.
[Testing and Watching]
Based on following blog, I decide to test on my lab:
Full Mailbox Access Rights + Send On Behalf = Send As ?
http://blogs.technet.com/b/ehlro/archive/2012/04/06/full-mailbox-access-rights-send-on-behalf-send-as.aspx
Description on my lab and test:
Exchange 2010 + Outlook 2010
Exchange 2013 + Outlook 2013
Senders: A01, A02, … , A07, A08
Recipient: A09
A01 grand permission to other senders.
Two methods:
a. Use A0x’s credential configure A01’s profile, then send From both A01 and A0x via Outlook. Watching result in A09’s Inbox and Sent Items which has message copy left.
b. Use A0x’s credential configure A0x’s profile, then send From both A01 and A0x via Outlook. Watching result in A09’s Inbox and Sent Items which has message copy left.
Result as following forms:
1. Exchange 2010 + Outlook 2010 / Exchange 2013 + Outlook 2013
Using A0x’s credential configure A01’s mailbox, then send From both A01 and A0x
To A09.
2. Exchange 2010 + Outlook 2010 / Exchange 2013 + Outlook 2013
Using A0x’s credential configure A0x’s mailbox, then send From both A01 and A0x
To A09.
[Common Issue]
1. [Issue]
Exchange 2010 + Outlook 2010. A01 grand A03 Send As permission. However A03 can’t send as A01 to A09 and get NDR:
You can’t send a message on behalf of this user unless you have permission to do so. Please make sure you’re sending on behalf of the correct sender, or request the necessary permission. If the problem continues, please contact your helpdesk.
Details as following pic:
[Troubleshooting]
1) Based on the NDR, it seems a permission issue. Check Send As permission, however the Send As permission configured correctly. Pic as below:
2) ince the Send As permission configured correctly, it seems the permission hasn’t been replicated. Try to restart Microsoft Exchange Information Store service. It works.
Note: The Send As permission isn’t granted until after replication has occurred. Replication times depend on your Exchange and network configuration. To grant the permission immediately, stop and then restart the Microsoft Exchange Information
Store service.
2. [Issue]
Exchange 2013 + Outlook 2013. A01 grand A03 Send As permission. However A03 can’t send as A01 to A09 and get NDR:
Your message did not reach some or all of the intended recipients.
Subject: xxx
Sent: xx/xx/2014 8:20 AM
The following recipient(s) cannot be reached: A09
This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80070005-00000000-00000000].
Details as below:
[Troubleshooting]
1) Also check the Send As permission configuration first.
2) Then try to use A03 send as A01 to A09 via OWA. If OWA works well, it seems and issue on the Outlook client side.
3) This behavior may occur if the OAB in Outlook isn’t updated. Try to download OAB manually.
4) If doesn’t work, please close Outlook and try to delete all the OAB folder on your computer. The path of OAB folder in Win7, Win8 as below:
\Users\<UserName>\AppData\Local\Microsoft\Outlook\Offline Address Books
5) Restart Outlook.
Note: Be aware that you cannot send e-mail messages on behalf of a mailbox if the mailbox is hidden from address list. When sending a message, Exchange requires that e-mail address is resolved in the
From field.
3. [Issue]
Exchange 2010. A01 grant A0x “Send As” or “Send on Behalf” permission. A0x send as/ send on behalf of A01. The message is only copied to the Sent Items folder in A0x’s mailbox (same as the result of my test). Also cannot configure Exchange 2010 so that the
message is copied to the Sent Items folder of both A01 and A0x.
[Troubleshooting]
This issue occurs because Exchange server 2010 was designed to copy message to the Sent Items folder of the sender only. This issue can be solved by installing Exchange 2010 SP2 UR4. More details in the following KB:
Messages that are sent by using the "Send As" and "Send on behalf" permissions are copied only to the Sent Items folder of the sender in an Exchange Server 2010 environment
http://support.microsoft.com/kb/2632409/en-us
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Nice guide Mavis, I recently explored the same topic. Few things you might want to add is the type of connectivity (Cached vs Online will produce different results) and to expand further on the methods of adding the other mailbox in Outlook (additional mailbox
vs additional account defaults to different methods). Check the screenshot:
And please post this somewhere more visible, like blog/wiki page.

Processor requirments for Exchange Server 2010 roles

I am looking at migrating from Exchange Server 2003 to Exchange Server 2010. My exchange environment has 350 mailboxes. Can anyone tell me how much processing power will be required for each exchange role to run on VMware? I know Microsoft's recommendation is 1GB per core.

Hi Amyraghunath,
It's hard to give general guidance on sizing Exchange 2010 since it is heavily dependent on your specific configuration. The key number to use for sizing the Mailbox server role is to know the number of messages sent/received per day. That number will help you size CPU and memory for your Mailbox server which will ultimately drive the sizing for the other roles.
A good place to start is the following article: http://technet.microsoft.com/en-us/library/ee712771(v=exchg.141).aspx
That article describes the impact of messages sent/received per day has on sizing the Mailbox server and shows the math that is involved as well. Once you know how to size the Mailbox server, you can size the other roles as well.
You can also use the Exchange Mailbox sizing calculator here ( Exchange 2010 Server Role Requirements Calculator - Exchange Team Blog - Site Home - TechNet Blogs), though be careful with this because if you aren't sure what you're entering in here you could end up with incorrect results.
Finally, here are some other great links that should be helpful to you in sizing your Exchange 2010 environment on vSphere:
http://technet.microsoft.com/en-us/library/dd346700.aspx
http://technet.microsoft.com/en-us/library/dd346699.aspx
VMware: Run Microsoft Exchange Server Software on a Virtualization Platform - United States
Hope these links help! If not feel free to post back here.
Matt
http://www.thelowercasew.com

"Message Queued for submission" performance counter high for Exchange Server 2010 Database

Hi,
We are receiving SCOM Alert as "Mail Submission service is experiencing issue: Messages Queued for Submission-sustained for 15 mins-RED (>25)".
After checking the "Messages queued for Submission" counter on the repective server it was found that the value is 66 but when we check the queue viewer we dont observe any messages stuck in Submission queue.
Would like to know what aspects can be checked here, in order to troubleshoot the issue?
The counter shows 0 value in perfmon for all other mailbox databases.
Thanks & Regards.

Hi,
This is a known issue with Exchange Server 2007 and Exchange Server 2010. We do not recommend that you use this counter for health alerts.
I recommend you refer to the following article:
http://support.microsoft.com/kb/2921142/en-us
It is caused by the MailSubmission service submits a message for delivery multiple times, the counter is incremented two times but decremented only one time. This situation can leave the counter with a positive value even though there
is no message in the queue. When you restart the service, the counter is reset.
Here is an similar thread for your reference:
http://social.technet.microsoft.com/Forums/en-US/c9b485a5-ef0e-4b9a-851e-28c4a4c0606a/msexchangeis-mailbox-messages-queued-for-submission-keeps-increasing?forum=exchangesvradminlegacy
Thanks.
Niko Cheng
TechNet Community Support

Enabling Webdav for exchange server 2010

Hi
As Webdav is not supported in exchange server 2010 , but it can be enabled in IIS server.
with doing this can webdav queries will be executed , or we have to have rewrite the code.
Regards,
Swati
SP Page: http://www.facebook.com/SharePointQ SP Blog: http://swatipoint.blogspot.com

WebDAV does not work with Exchange 2010. Use EWS instead.
Migrating from WebDAV to Exchange 2010.
Mike Crowley | MVP
My Blog --
Planet Technologies

Update Rollup 6/7 for Exchange Server 2010 SP2

Similar Messages

Maybe you are looking for