Update Rule: error during activate process

Dear Guys!
I could not activate one of my update rules. When i go to transport connection
to try solve the problem, found this errors:
Object '0SPL_EXPHRZ' (IOBJ) of type 'InfoObject' is not available in version 'A'
Object '0SPL_TARGET' (IOBJ) of type 'InfoObject' is not available in version 'A'
Object '0SPL_TRSORD' (IOBJ) of type 'InfoObject' is not available in version 'A'
If i ignore this errors and transport the rule, i receive the RSAU466 message.
But i checked the rule's program and didn't found any error.
Can somebody please help?
Regards,
Wilson
PS.: Sorry my english, it's not my natural language.

Hi Manga!
First of all, thank you for the attention!
I solved the update rule's problem transporting the infocube and the rules again. The infocube after the rules.
Now every thing is OK. I sent your tips to the BW-Administrator, he will solve the problem about 0SPL_EXPHRZ, 0SPL_TARGET and 0SPL_TRSORD, because the rule's problem it wasn't related with this.
Best Regards
Wilson.

Similar Messages

DYNAMIC_CALL_FAILURE Error during proxy processing An exception with the ty

Hi,
SRM 7.0 contains 2 clients:
Sender: 100 for EBP, logical system is CLNT100
Receiver: 200 for SUS, logical system is CLNT200
both the clients are connected through PI 7.0, logical system of PI is CLNT001.
From SPROXY of 100EBP, i'm executing the outbound proxy, in moni sent msg success.
In PI also msg is processed.
But in SUS200, it is showing below error msg:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
<SAP:P2>CL_BBPX_TRADING_PARTNER_SUS_IN</SAP:P2>
<SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Pls help in resolving the same....
tnx n rgds,
balu

Hi,
How did you solve the issue? Can you please provide the solution.
Thanks,
-Devi Swain

Error during proxy processing

Hi Experts,
We have a web service hosted on PI and getting the Tax Jurisdiction values from Taxware via ECC(ECC has a TCP/IP connection to connect to Taxware system, From there ECC gets Taxjurisdiction Codes and gives back to PI).
When we make a call to this Web service following Error response has been given. Please let us know what could be the reason.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1 />
<SAP:P2>ZCL_GET_TAX_IN</SAP:P2>
<SAP:P3>GET_TAX_JURISDICTION_SYNC</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing Message E TAX_TXJCD 110 cannot be processed in plugin mode HTTP</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Thanks,
Sekhar.J

Hi,
We are using XI adapter. The same Web Service is working good in Development and Quality Enviroments, I am wondering why it is failing in Production Environement intermittently. And also in ECC we are using TCP/IP connection to fetch Tax Jurisdiction codes from TaxWare System. This TCP/IP connection was configured in SM59 of ECC. PI will make call to ECC and ECC will make call to TaxWare and returns the result back PI.
Thanks,
Sekhar.J

Error during proxy processing An exception with the type CX_BBPX1_STD_MESSA

Hello,everyone!
My PI version is 7.11,SRM SUS version is 7.0,ECC version is 6.0 ,When I import XI SRM CONTEN,sending IDOC in ECC,there is a error some of the mesages:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
<SAP:P2>CL_BBPX1_SUSPO_IN</SAP:P2>
<SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Detialed error from SXMB_MONI,
Error in XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner 0015111411 with type 'Vendor' I:R5:553 -'Different country' field contents deleted because identical to 'Country' E:BS:002 -"Create" is not allowed (SUS Purchase Order 7100076527 ) Program: CX_BBP_BD_ERROR===============CP; include: CX_BBP_BD_ERROR===============CM002; Line:
This issue only ocuured for partner 0015111411, but we tried with other partner ID and those messages are processed sucessfully and PO is created.
I have a doubt that, is there functionality in proxy to compare the country with partner in SRM system. Could please anyone help me one the same.
Regards,
Baskaran K

HI,
This is a standard proxy. I'm not sure how to debug the proxy with payload. Could you please tell me the steps.
We have one more error message
<FAULT_TEXT>Error in XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner XY91 with type 'Sold-to Party' E:BS:002 -"Create" is not allowed (SUS Purchase Order 7100076526 ) Program: CX_BBP_BD_ERROR===============CP; include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>
Is there any table to check these details like Sold-to Part, Vendor etc in SRM system?
Regards,
Baskaran K

Error during Proxy Processing from ECC system

Hi All,
I had created Webservice using ABAP in ECC system with Message interface designed in XI system. This Webservice will simply displays employee address when you enter employee id and address type.During my testing of Web service in ECC system via Tcode WSADMIN, I am getting below error
"An error has occurred. Maybe the request is not accepted by the server: "
"Error during proxy processing"
Request
POST /sap/bc/srt/xip/sap/Z_ADDRESS_01?sap-client=100 HTTP/1.1
Host: rpmsap3.rapidigm.com:8080
Content-Type: text/xml
Connection: close
authorization: <value is hidden>
Content-Length: 389
SOAPAction: ""
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Body><ns1:Request_Message xmlns:ns1='http://sap2webservice'><Employee_Id>MM01</Employee_Id><Address_Type>AM</Address_Type><Date>11/11/2006</Date></ns1:Request_Message></SOAP-ENV:Body></SOAP-ENV:Envelope>
Response
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Body><ns1:Request_Message xmlns:ns1='http://sap2webservice'><Employee_Id>MM01</Employee_Id><Address_Type>AM</Address_Type><Date>11/11/2006</Date></ns1:Request_Message></SOAP-ENV:Body></SOAP-ENV:Envelope> HTTP/1.1 500 Internal Server Error
set-cookie: sap-usercontext=sap-client=100; path=/
content-type: text/xml; charset=utf-8
content-length: 270
sap-srt_id: 20061111/154215/v1.00_final_6.40/A901A40749EEA74BB8D8AB72B56C02A7
server: SAP Web Application Server (1.0;640)
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/"><soap-env:Body><soap-env:Fault><faultcode>soap-env:Server</faultcode><faultstring xml:lang="en">Error during proxy processing</faultstring></soap-env:Fault></soap-env:Body></soap-env:Envelope>
Appreciate any help on above issue
Regards
Manish Mundra

Hi All,
Please help on below issue.
Thanks in Advance
Regards
Manish

Error during proxy processing An exception with the type CX_SY_OPEN_SQL_DB

Hi All,
I am facing the following problem in production server when even the file got processed successfully .
Error during proxy processing An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause The system tried to insert a data record, even though a data record with the same primary key already exists
Can you please suggest how it can be handled?
Regards,
Saras

You need to debug your proxy program and check all the insert statemrnts. Looks like there is an exception being thrown in the proxy (may be after the completion logic to push the data in to db) which is not being caught.
Proxies are object oriented and it is a good practice to implement Exception Handling mechanism.
VJ

Update Rule error while loading the data

Hello All,
I tried to do the init load for the datasource 2LIS_02_VAKON (Sales Document Condition), But it error's out in the Update rule saying:
Short text: Error when generating the update program
Long Text: Diagnosis
     An error occurred during program generation for InfoSource 2LIS_11_VAKON
     and InfoProvider 0SD_C15 . This may be extrapolated to incorrect update
     rules.
Procedure
     Check and correct your update rules and then generate the update program
     again. You can find help on the error in the error log.
The update rule looks very fine. I even deleted it and re created, but no success..... Please give me your thoughts abt it..... Any suggestions will be great for me.....

Hello Gokul,
I could'nt see any analyse button in RSMON. This is the only error message I could get from the Process monitor:
Short text: Error when generating the update program
Long Text: Diagnosis
An error occurred during program generation for InfoSource 2LIS_11_VAKON
and InfoProvider 0SD_C15 . This may be extrapolated to incorrect update
rules.
Procedure
Check and correct your update rules and then generate the update program
again. You can find help on the error in the error log.
Do you expect something else ? Also I went through your OSS note, they are asking to apply support pack 18. Is this a serious issue to apply SP? Because in Quality and Prod it loads fine......
Please let me know your idea

While creating Update rules -"Error Info source does not exist"

While creating an update rule I am getting an error that Info source doesnot exist though the inf source is active.
here is error:
No communication structure exists in version abc... A
Message no. RSAU251
Diagnosis
In order to be able to maintain the update rules an active communication structure must be available.
Procedure
This error message can have two causes.
No active communication structure exists.
Activate the communication structure in the Data Warehousing Workbench.
No communication structure exists for the InfoSource.
Create a communication structure in the Data Warehousing Workbench for the InfoSource.
<<text removed>>
Thanks,
Vasu
Edited by: Matt on Apr 26, 2010 9:31 AM

Hi Vasu,
as it clearly shows below message
No communication structure exists for the InfoSource.
Create a communication structure in the Data Warehousing Workbench for the InfoSource.
Create an info source first and assign it to your datasource and map the fileds in transfer rules and activate it.
Then try to create the update rules between your target and info source.
Hope this helps.
Regards,
Reddy

Update Rule Error

Hi Friends,
I am installing Update rule for info Cube name: 0PAPA_C02 ( HeadCount ).
I am facing problem in installing update rule wiht following error "Object Update rules 907KB92TLFDNXIKNGFCS15IN4: Error installing the Content version" , can any one will help on this.
I shall be glad for every one for positive reply.
Regards
Deepak

Hi Mansi,
As per SAP Note No 336229, we are installing info cube 0PAPA_C02 ( Headcount ) with Grouping selection as "In dataflow before and after" . On simulation we got this error only. pl. suggest where to find detail logs for this..
info source is active.
Note no 336229 Detail
Do the following steps in your BW System:
1. Transfer the Business Content in the Administrator Workbench:
Choose InfoCube 'Headcount' (0PAPA_C02), collect all objects with
grouping 'Data flow before and after' and copy them from the Business
Content afterwards.
Check whether key figures 0ANSAL_NC / 0ANSAL_VC, 0HDFTE_NC / 0HDFTE_VC
and 0HDCNT_NC / 0HDCNT_VC were activated in the process.In addition,
InfoCube 0PAPA_C02 itself, InfoSource 0HR_PA_PA_1 and the respective
update rules should be active.
Regards
Deepak

Error during activation process

hi all,
i have"error occured during activation process" DSO...but the request is available for reporting.what do i do?
thanks

Hello Dear
In the setting of infopackage you have following options
a. No update, no reporting (default)
If errors occur, the system terminates the update of the entire data package. The request is not released for reporting. However, the system continues to check the records.
b.Update valid records, no reporting (request red)
This option allows you to update valid data. This data is only released for reporting after the administrator checks the incorrect records that have not been updated and manually releases the request (using a QM action, that is, by setting the Overall status on the Status tab page in the monitor).
c.Update valid records, reporting possible
Valid records can be reported immediately. Automatic follow-up actions, such as adjusting the aggregates, are also carried out.
Check if you have selected the third option
Thanks
Tripple k

DSO - Cube : Update Rule Error

When trying to push data from an DSO to a ube, the request stays amber until finally short dumping.
The update rule is activated and all key figures, characteristics and time characteristics are filled correctly from the DSO.
The error message in the monitor of the request is:
<i>Update Rules (15199 => 0 records) : Errors Occurred</i>
How do I see the exact error description of what caused the update rule not to transfer any records? I can't seem to find much information in the monitor of what went wrong.
Thanks in advance,
Matt

There is a characteristic called 'Reporting Week' that uses some routine to convert the a document 'created on' date in the week/year format (e.g 01.2008).
Code of this routine is below. All other characteristics or key figures in this update rule are matched with source fields.
fill the internal table "MONITOR", to make monitor ent *ries
result value of the routine
DATA: i_per(3) type n,
i_year(4) type n.
CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
EXPORTING
I_DATE = COMM_STRUCTURE-createdon
I_PERIV = 'ZW'
IMPORTING
E_BUPER = i_per
E_GJAHR = i_year
EXCEPTIONS
INPUT_FALSE = 1
T009_NOTFOUND = 2
T009B_NOTFOUND = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
concatenate i_year i_per+1(2) into RESULT.
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 0.
if abort is not equal zero, the update process will be canceled
ABORT = 0.

Update rules error urgent

Hi friends,
Iam uploading data Parallely ODS &CUBE.
But iam getting Red in ODS and Yellow in CUBE.
When i check the error in ods level.
showing below error ...
Update rules ( 12485 -> 0 Records ) : Errors occurred
Fatal error in customer routine 9998.
What does it mean?
My routine progrm is written in ODS level like
fill the internal table "MONITOR", to make monitor entries
LOOP AT DATA_PACKAGE.
    IF DATA_PACKAGE-doc_categ NE 'C' AND
       DATA_PACKAGE-doc_categ NE 'I'.
      DELETE DATA_PACKAGE.
    elseif DATA_PACKAGE-recordmode eq 'R'.
      DATA_PACKAGE-recordmode = 'X'.
      modify DATA_PACKAGE.
    ENDIF.
ENDLOOP.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
HERE ANY CHANGESS REQURIED?
Kindly help me.
Thanks in advance
Ramya
Message was edited by:
        ramya thulluru

Hi Ramya,
You would need to debug the code to find the exact place where it is failing.
You would need to include an infinite loop in the start routine of the update rules. Your code may be as follows:
data: t_debug_flag_start value 'X'.
if t_debug_flag_start = 'X'.
do.
if t_debug_flag_start = ' '.
exit.
endif.
enddo.
endif.
Now when you execute the infopackage you would find that a generated program GP*** in sm50. You can debug the generated program by changing the value of t_debug_start.
Bye
Dinesh

Update rules error

Hi All,
I got this error when i try to activate the update rule of the InfoCube:
IC=(infocube's name) IS=8(ODS' name) error when generating InfoCube Update program.
IC=(infocube's name) IS=8(ODS' name) syntax error: The Dictionary structure or table "/BIC/DP_SRM011" rows 32
Does anyone know anything about this error?
Thanks!

Have a look at this:
Error in Update Rules
Regards

Error during Export process to Hyperion Planning:

Hello All,
I am trying to load data to Hyperion Planning from EBS GL. I have completed the setup including setting up source, target, mappings, rules, etc. The import and validate process from EBS is working fine but export to Hyperion Planning fails right away. In my limited experience with FDMEE, I have not seen this error before and your help is greatly appreciated.
Here is an excerpt of error from FDMEE process details which is the same error shown in ODI. Everything before this process seems to be working. It seems like it is complaining about a host name but not sure which host name should I be looking at.
Environment: EBS12, FDMEE 11.1.2.3.520, Everything is on 64bit Linux
Error:
2015-01-14 08:53:25,578 DEBUG [AIF]: AIFUtil.callOdiServlet - START
2015-01-14 08:53:25,690 FATAL [AIF]: Error in CommData.loadData
Traceback (most recent call last):
File "<string>", line 4853, in loadData
File "<string>", line 1122, in callOdiServlet
File "__pyclasspath__/urllib2.py", line 124, in urlopen
File "__pyclasspath__/urllib2.py", line 387, in open
File "__pyclasspath__/urllib2.py", line 497, in http_response
File "__pyclasspath__/urllib2.py", line 425, in error
File "__pyclasspath__/urllib2.py", line 360, in _call_chain
File "__pyclasspath__/urllib2.py", line 506, in http_error_default
HTTPError: HTTP Error 504: Unknown Host
2015-01-14 08:53:25,691 DEBUG [AIF]: CommData.updateWorkflow - START
2015-01-14 08:53:25,691 DEBUG [AIF]:
        UPDATE TLOGPROCESS
        SET PROCESSENDTIME = CURRENT_TIMESTAMP
        ,PROCESSSTATUS = 32
          ,PROCESSENTLOAD = 0
          ,PROCESSENTLOADNOTE = 'Load Error'
        WHERE PARTITIONKEY = 3 AND CATKEY = 1 AND PERIODKEY = '2011-04-30' AND RULE_ID = 24
2015-01-14 08:53:25,692 DEBUG [AIF]: CommData.updateWorkflow - END
2015-01-14 08:53:25,692 DEBUG [AIF]: Comm.executeScript - START
2015-01-14 08:53:25,692 DEBUG [AIF]: The following script does not exist: /u01/fdmee_app/ALPLAN/data/scripts/event/AftLoad.py
2015-01-14 08:53:25,692 DEBUG [AIF]: Comm.executeVBScript - START
2015-01-14 08:53:25,693 DEBUG [AIF]: The following script does not exist: \u01\fdmee_app\ALPLAN\data\scripts\event\AftLoad.vbs
2015-01-14 08:53:25,693 DEBUG [AIF]: Comm.executeVBScript - END
2015-01-14 08:53:25,693 DEBUG [AIF]: Comm.executeScript - END
2015-01-14 08:53:25,746 DEBUG [AIF]: Comm.finalizeProcess - START
2015-01-14 08:53:25,747 DEBUG [AIF]: CommData.updateRuleStatus - START
2015-01-14 08:53:25,747 DEBUG [AIF]:
    UPDATE AIF_BALANCE_RULES
    SET STATUS = CASE 'FAILED'
      WHEN 'SUCCESS' THEN
        CASE (
          SELECT COUNT(*)
          FROM AIF_PROCESS_DETAILS pd
          WHERE pd.PROCESS_ID = 173
          AND pd.STATUS IN ('FAILED','WARNING')
        WHEN 0 THEN 'SUCCESS'
        ELSE (
          SELECT MIN(pd.STATUS)
          FROM AIF_PROCESS_DETAILS pd
          WHERE pd.PROCESS_ID = 173
          AND pd.STATUS IN ('FAILED','WARNING')
        END
      ELSE 'FAILED'
    END
    WHERE RULE_ID = 24
2015-01-14 08:53:25,748 DEBUG [AIF]: CommData.updateRuleStatus - END
2015-01-14 08:53:25,749 FATAL [AIF]: Error in COMM Load Data
2015-01-14 08:53:25,749 DEBUG [AIF]: Comm.updateProcess - START
2015-01-14 08:53:25,751 DEBUG [AIF]: Comm.updateProcess - END
2015-01-14 08:53:25,752 DEBUG [AIF]: The fdmAPI connection has been closed.
2015-01-14 08:53:25,753 INFO [AIF]: FDMEE Process End, Process ID: 173

Yes it does. I was able to connect with planning and can see all planning dimensions in FDMEE. In this instance, everything is installed on the same box so it better be resolving the host

Error during propagation process in streaming

I am getting following error during propagation
ORA-12170: TNS:Connect timeout occurred ORA-12170: TNS:Connect timeout occurred
In order to resolve this i add following lines in sqlnet.ora on both nodes, but problem is still there....
SQLNET.SEND_TIMEOUT=300
SQLNET.RECV_TIMEOUT=300
SQLNET.INBOUND_CONNECT_TIMEOUT=300
SQLNET.DEFAULT_SDU_SIZE=32767
SQLNET.RECV_BUFF_SIZE=655336
SQLNET.SEND_BUF_SIZE=65536Need your help in resolving this issue........

Hi,
What is Resp. Resolver Name and Decision Type in your Process Level Definition? Did you create custom agent BADI implementation?
Regards,
Masa

Update Rule: error during activate process

Similar Messages

Maybe you are looking for