Update rule for ODS problem

Hi experts,
I have a ODS which is created on another ODS. The unerlying ODS had one infoobject and later on it was removed. The problem occurs when creating the udpate rules for the top ODS. The deleted infoobject comes in the update rules of the ODS as grey but I think it shouldnt be there .

Hey, in the Update Rules, you have 2 sections.
1) Source ODS InfoObjects
2) Taget ODS InfoObjects
If you want, remoe the InfoObject from both the ODS.
Also, activate the Source ODS again and also Activate the Update Rules too.
Uday-Ram Chamarthy

Similar Messages

  • RSAU461, problem with activating update rules for cube 0csrv_c01

    Hello,
    I have added new fields to data source 0CRM_SRV_PROCESS_H, then changed transfer rules, added characteristics to ODS 0crm_proh, and reactivated update rules 80crm_proh. But now I have problem with second update rules for this cube named 80crm_cnfh. It is not active and all fields in it have red status, error RSAU461, and I cannot activate it.
    What I should do? Should I change somehow that second source for data to my cube (change infosource, ods, rule?)
    Regards
    Radek

    hi
    As said by the Mti u have just changed the info objects in the ods and u need to map them with the specific info objects from the ods.
    double click on the Update rules of the cube and go to the characteristic tab there map the newly added info objects with the IO in the ods.
    Khaja

  • Update Rules to ODS

    I have created an ODS which includes 3 key figures as data fields.
    When I create update rules to this ODS the key figures do not appear in the Update rules.  Is there any reason why and how can I resolve? Thanks
    This is specifically for an update rule to an Inventory management snap shot ODS for the InfoSource 2LIS_03_BX, if I look to create update rules for 2LIS_03_BF and 2LIS_03_UM the key figures are available in the update rules
    Message was edited by: Niten Shah

    HI Niten,
        After long time on this thread.
        But i came across the same problem now which u did last year .
        Did u solve this probelm of missing key figures in update rules 2lis_03_bx??
    Can u let me know how to solve this problem.
    regards,
    Sujai.

  • How to debug start routines of update rules from ODS to InfoCube

    Dear gurus,
      I have an update rule from ODS to InfoCube. I wrote a start routine in the update rule. Now I want to debug it. I went to monitor and simulate update the data package and only got the prompt "No data exists in the corresponding PSA table". So how can I debug this start routine?
      Thanks in advance.
    Jin Ming

    Jin,
    In order to use PSA between ODS and InfoCube, you may have to use an exclusive InfoPackage and load separately. In that InfoPackage, choose the radio button to use a PSA.
    I think you are currently updating the InfoCube directly without using a separate InfoPackage.
    Look for an InfoSource under DataMarts (search for 8<ODS Technical name>) and create your InfoPackage there.
    Good luck.

  • Error while copy of Update Rules from ODS 0SD_O03 to InfoCube 0SD_C13

    Hi all,
    I work on a NW04s SPS9 System I would like to simply copy Update Rules (from an ODS to an InfoCube) from the BCT to the 1:1 Z-Copies of these Objects.
    To do so, I copied the InfoProviders 0SD_O03 and 0SD_C13 to Z-Versions. In SAP BCT the InfoCube is updated from the ODS. The ODS itself is updated from InfoSource.
    After successfully copying the two InfoProviders as next step I tried to copy the Update Rules from the Content version Objects to the Z-Version Objects to link them.
    Similar to copying update rules in 3.5 I tried
    - right click on "ZSD_C13"
    - choose Additional Functions - Create Update Rules"
    - choose DataSource: ODS Object "ZSD_O03"
    - choose Copy from: InfoCube "0SD_C13"
    This result in the error "0SD_C13 is not suitable as a template for copying update rules".
    Some hints that might help:
    1. The very same error occurs if I try to copy the Update Rules from 0SD_O03 to 0SD_C13.
    2. I also tried to copy both Update Rules (to C12 & C13) on a BW 3.5 system where it worked fine: The update rules from both Z-ODSs to both Z-Cubes were copied correctly 1:1 and without any errors.
    3. In the NW04s System I was able to copy the Update Rules from the InfoSource 2LIS_11_VAITM to 0SD_O01 (as well as from 2LIS_11_VAHDR to ODS 0SD_O03). So I only cannot copy Update Rules from ODSs to InfoCubes while it is possible to copy Update Rules from InfoSources to ODSs.
    4. During copy of 0SD_O03 the system warned: "InfoObject 0FISCVARNT needs to be in key for DataStore object ZSD_O03". No matter whether I move this IO to the keys of the Z-ODS, the Update Rules copy does not work.
    - This warning does not show up on BW3.5 when I copy the very same ODS. Can anyone explain this?
    - This warning is not displayed during the copy of ODS 0SD_O01, just for 0SD_O03.
    5. Obviously during a preceding test I actually must have been able to copy the Update Rules for another copy of 0SD_C13 (as I can see the Update Rules in the SAPGUI). I stopped this first test as I was not able to do the Update Rules copy for 0SD_C12.
    Yet as of today I cannot copy Update Rules this for both cubes 0SD_C13 as well as 0SD_C12. So yesterday there was no error on copying the Update Rules to InfoCube ZSD_C13, but today there is. To my knowledge nothing has been changed in the System Setup / Customizing in the mean time.
    6. For both cubes ZSD_C13 as well as ZSD_C12 it is possible to copy Update Rules that map from the BCT ODS to the Z-InfoCbes. So I can copy Update Rules from 0SD_O03 to ZSD_C13 and from 0SD_O01 to ZSD_C12. This would point in the direction that the copied ODSes are the source of this behavior?
    I am not sure whether this is a special NW04s behavior and how to use it correctly so the Update Rules can be copied.
    Please could you help on how to copy these Update Rules in NW04s or share your experience if you had similar?
    Thanks a lot,
    Werner

    Hi Vinod,
    Check the update rules for the original cube. Are they active? It appears that they contain a formula...check this too.
    Hope this helps...

  • Missing Update Rules for 0IC_C03 in Business Content

    We had a problem with 0IC_C03,  so we decided to reload from Business Content and then migrate to 7.0 format again.
    However, when we try to gather all of the dependent objects for the InfoCube in Business Content, we only get one set of obsolete update rules (2LIS_40_S278), and the update rules for 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM do not show up.  They do not appear under update rules, either.
    I know they were there at one point because I activated and migrated the cube once already.
    Can someone help us find our lost update rules?

    Hi Dan,
    There are no update rules deliverd with BI 7.0 for 0IC_C03. There are only
    transformations Delivered as part of the content. In the new release
    Transformation replace the update rules and the transfer rules.                                                                               
    You have the 3 data sources and the associated transformations to  
    upload data to the infoCube.                                                                               
    Transformations installed                                          
    TRCS 2LIS_03_BF_TR -> CUBE 0IC_C03                                 
    TRCS 2LIS_03_BX_TR -> CUBE 0IC_C03                                 
    TRCS 2LIS_03_UM_TR -> CUBE 0IC_C03                                                                               
    DataSources installed                                             
    2LIS_03_BF                                                        
    2LIS_03_UM                                                        
    2LIS_03_BX

  • Update rule key figure problem

    Hello All,
    I am busy creating update rules for an InfoCube. I have defined the update type for the key figure as "addition", I have also selected the source key figure (Budget Volume APO PC) but get the message "Target unit and source unit for the key figure Budget Volume APO PC must be the same" and it gives a red status to the key figure. Please explain what I should do to rectify the problem?
    Thank you and kind regards,
    Keith

    Hello KeItH,
    how r u ?
    first analyze the InfoObject and then if it is not going to be added up for the result value then u can try selecting OVERWRITE option, but this will overwrite your old values and hold the latest one.
    Best Regards....
    Sankar Kumar

  • UPDATE RULE ON ODS

    Hello,
    I am trying to create update rule on ODS but it does not let me do that....says...."INFOOBJECT 0RECODMODE IS MISSING"
    Can anyone help.
    Thanks

    Hi,
    Your infosource should have the infoobject 0RECORDMODE, it is mandatory infoobject, if you are creating an update rule from the infosource. This infoobject will give you before after image. So Solution is you can include the the 0recordmode directly in the communication structure of the infosource and leave it umapped, and then create and update rule with it.
    For further infomation about 0RECORDMODE go through this link below.
    /people/swapna.gollakota/blog/2007/12/27/how-does-a-datasource-communicates-delta-with-bw
    hope this helps.
    (Assign me points).
    Thanks,
    Lasya.

  • Error when activating update rules for R/3 training and event management

    hi all,
    when iam trying to activate update rules for training and event management cube it is giving fallowing error."IC=0PE_C01 IS=0HR_PE_1 error when checking the update rules
    Message no. RSAU461".
    please guide me how to solve this issue.
    thanks & regards
    Vamshi D Krishna

    Hi Vamsi,
    Have you followed the following document to implement HR ?
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0780530-bf03-2b10-d5ad-e9e8a53def23

  • Error while maintaining the Update Rules for the Infostructure

    Hi,
    I have added 2 new characteristics for the existing infostructure S9xx and executed the same. While maintaining the Update Rules for the same, system is giving the error message 1. "Field 'PARVW' unknown" and 2. Error generating program RMCX0011.
    Please guide me in resolving the issue.
    Thanks & Regards,
    Kumar.

    Hi,
    This is with reference to my earlier question that an error is occuring while maintaining the update rules for the existing Infostructure.
    Solution provider for this will be rewarded with good points.
    Regards,
    Kumar.

  • Add update rule for new key figure in one info struc

    Hi, everyone
    I would like to know how to add update rule for new key figure in one info struc.
    Thanks ahead.
    Eric

    1)I have created the update rule for one info structure
    2)add one key figure in the info structure due to business requirement
    3)then I use MC25 to add update rule for the new key figure, but I find that there no relevant menu to do such operation.
    Can anybody tell me how to do with it?
    Any answer will be appriciated.

  • Transport update rules or ODS

    Hi,
    Do i need to transport update rules or ODS object first
    Thanks

    You can transport them both in the same transport.  But if you have to separate them, then the ODS should go first.

  • Error while installing 2LIS_03_BX update rules for 0IC_C03

    Dear experts,
    when i am trying to install the standard business content
    update rule for 0IC_C03 for the datasource 2LIS_03_BX,
    it throws me a error stating
    "Object UPDR BW9VUFZSUYTTIZS0HT9I4U3RP could not be found"
    I need the cause and solution for this error.
    With regards,
    Meiyappan

    Please choose to install the Update Rule between InfoSource 2LIS_03_BX to InfoCube 0IC_C03.
    You have probably not selected to install the Update Rule which is throwing an error.
    While Installing, after choosing the required Objects, please also change the Display to "List" to be able to view all objects clearly.
    Regards
    Anujit Ghosh

  • BW 3.5 update rules for master data

    Hi all,
             I create a dummy report in that report lifnr is charactics and name its att. after  this i create a application component and assign data source and create infopkg   data coming in lifnr and name field properly <b>i assign data source using direct master data update</b> after this i create infocube and assign dim.
    but when i rgt click on infocube and display dataflow it shows only one level and when i open bex and open that it shows no application data found why this happened after creating infocube it is nessory that i creat update rule for this am i right plz send your openion.
    thx

    Hi Ankit,
                  Yoy have to load data to the cube.For that you need update rules.
    Steps to load data to the cube
    1.Replicate the datasource.
    2.Assign Infosource
    3.Create transfer rules
    4.Maintain the update rules to the cube.
    5.Right click on the datasource and schedule an infopackage for it.
    Execute the Infopackage and pull the data to the cube.
    Hope this helps
    Regards
    Karthik

  • Update rule for COSTCENTER master data

    Hello All,
    Cost Center is not an attribute of 0EMPLOYEE, neither a field provided by the table PERSON.
    0COSTCENTER gets data from the MASTER Datasource 0COSTCENTER_ATTR. When writing an update rule for this characteristic, what code should be written?
    and Which fields should be considered from the table /BI0/MCOSTCENTER.
    Thanks in advance.
    Regards,
    KP

    Hello,
    Lets consider a ZINF infoObject with time dependent attribute as ZDEPART.
    When writing an update rule, I do a lookup on ZINF. Do  I have to write a code for this llokup (mapping this infoObject)?
    After writing a code for a lookup on ZINF, will this InfoObject be available for selection in "Master data attribute of"?
    Kindly reply.
    Regards,
    KP

Maybe you are looking for