Update Rule Migration from ODS to Cube --Error

Hello SAP Experts,
I am triing to migrate Update Rule (from 3.x to 7.0 transformation) from DSO 0QM_DS01 to Cube 0QM_C12 and i am getting error.
Error message:
Internal error: 32 0NOTIFICATN 01 Standard Group MASTER - Contact SAP.
Similary with another update rule migration from DSO 0QM_DS02 to Cube 0QM_C13 .
Error message:
Internal error: 41 0NOTIFICATN 01 Standard Group MASTER - Contact SAP.
I dont have any clue about the error message. Need your help to figure it out the issue.
Thanks in Advance.
Lasya.

MR..V.. you are the man... my problem has been solved.
Anyway my problem has been solved.. do you mind asking one more question regarding the above error?? how did you think about the above solution.. just changing it from read master data --> direct assingmen then back to read master data.. Please tell if i come accorss anything in future shall i follow the same.. please tell me..
I have assigned full points to you.
Thanks for all your help.
Lasya.

Similar Messages

Updation of data from ods to cube

hi all,
I have 8 activated request in ODS . now I want to load data into a cube
from this ods .
is it possible to update request one by one so that I have same no. of request
in cube as in ods?
Thanks in adv.

Hi
If you want to do like that, you have to create an infopack which updates data from ODS to cube.....Go to datamart ODS in your Infosouces...create an infopack....and you can giv request id in selection and do one by one
Assign points if useful
Thanks
N Ganesh

Push from ODS to cube taking a long time

Hi All,
I've created a new ODS that pushes data to a new cube. I am trying to load 3000 records and its taking over 30 minutes, and I can never get it to complete successfully. When I look in sm50, there is nothing running. The are no short dumps in st22. But when I look in sm21 I get the following:
Documentation for system log message R6 8 :
An error has causes an SAP rollback. All database updates are reset.
Technical details
File................ 009581
Position............ 0000072900
Entry type.......... m      ( Error (Function,Module,Row)    )
Message ID.......... R6 8
Variable parts......                                       ThIRollroll bathxxhead1248
My update rules between the ODS and cube are very straightforward. All fields are a direct mapping to the ODS, no routines. I have a start routine, but when I comment out the entire start routine and run the update between ODS and cube, I still get the same issue. We are on version 3.5.
Any suggestions?
Thanks
Charla

Hi,
Try "generate export data source" from ODS and load the data. Sometimes there is problem in DDIC tables and structures are not generated properly.
Regards,
Kams

Delta Load failure from ODS to Cube

Experts,
After CRM upgrade, I had to reinitilized the delta process. In this, I reloaded ODS with first init delta without data and then delta load with new data created in CRM. This worked good so far. After this when I tried to load cube with init. delta without data, no issues. But delta load from ODS to Cube doesn't work. Does anybody have any suggestions, please?
Thanks,
Nimesh
Following error observed in Status for delta load from ODS to Cube.
Error when transferring data; communication error when analyzing
Diagnosis
Data Packets or Info Packets are missing in BW, but there were - as far as can be seen - no processing errors in the source system. It is
therefore probable that an error arose in the data transfer.
With the analysis an attempt was made to read the ALE outbox of the source system, which lead to error .
It is possible that no connection exists to the source system.
Procedure
Check the TRFC overview in the source system.
Check the connection of the source system for errors and check the
authorizations and profiles of the remote user in both the BW and
source systems.
Check th ALE outbox of the source system for IDocs that have not been

Hi,
As far as i understood, you have successful deltas' loading to the ODS and you want to update entire ODS data to the Cube followed by daily delta's.
If this is the case,
Make sure that you have active update rules exist between ODS and Cube.
First goto your ODS and right click and select option 'Update ODS data in data target'.
Select Init update > IT will take you to the init info package where you select init with data transfer (Init with data transfer will bring all the records from ODS to Cube)
Once init is completed ,you can schedule to load delta's regularly form ODS to Cube by following the same steps.
Hope this helps
Praveen
Message was edited by:
Praveen Vujjini

Error in updating data from ODS to CUBE.

Hi,
I am tryin to load data manually from ODS to CUBE in NW2004s.
This is a flat file load from the datasource to the ODS and then from the ODS to the CUBE.
In the CUBE, I am trying to populate fields by using the ODS fields.
For eg.
In the ODS, a CHAR Infoobject has the data in the timestamp format(i.e. mm/dd/yyyy hh:mm ). I need to split this data and assign them to the two individual DATE and TIME Infoobject in the CUBE.
For this, I have done the coding in the Transfer Structure in the Rule Group.
The time field is gettin populated , but the date field is not getting populated.
I get an error as Eg:
Value '04052007' for CHAR 0DATE is not plausible
Due to this, the corresponding records is not getting displayed
Also, the records where the time id displayed, the date is not getting displayed inspite of the date being correct.
Please help me with a solution for this.
REMOVED
Thanks In Advance.
Hitesh Shetty

Hello Hitesh
SAP accepts the date format in YYYYMMDD, so in the routine where you have concatenate the day month year...just do it in reverse order.....
Thanks
Tripple k

"Error when activating update rule" after changing ODS key

Hi Gurus,
I have problem when transporting in productive system an existing ODS & the update rule linked. The message is : "Error when activating update rule".
This is when i move one field from the key to a simple field of the ODS.
Before transporting requests, i deleted data in the ODS by right-click on ODS --> Request tab --> select the request --> click on delete....
I don't understand because i did the same in Qual environment and everything is OK : transport request & ODS loading...
Please help.....

Hello,
Please try to check/perform the following steps:
1- You must ensure for the update rule have mapping between infosources
   and ODS/CUBEs correct, this means that also these objects need
   to be of the same version in the source system of the transport as in
   target system.
2- Please ensure all infoobjects in the cube are active.Please
   reactivate all the objects again in source system.
3- Ensure all infoobjects are found in the communication structure.
4- Please try to collect the update rule via BW transport connection
   with the grouping option "only necessary objects" and then transport
   those objects again.
Could you please reactivate the infocube and its update rules again
and then create a new transport for this infocube and transport it
again.
Best regards,
Paula Csete

Error while uploading data from ODS to Cube

Hi All,
Will you please help out this issue.As this is a priority high issue,please reply if you know the answers.
I am facing an error while loading the data from ODS to CUBE,the error
is
1.Name is not in the namespace for generated BW Metaobjects
2.Error 18 in the update
And this error is occuring only in quality server.
Thanks,
Ram.

HI RAM SIVA,
make sure that the Data source is replicated and tranfer rules r active.
And also check whether the all transport requests r imported properly.
hope it helps
bhaskar

Error while loading data from ODS to CUBE.

Hi friends,
When l am loading data from ODS to Cube with help of data mart, I am getting error in QA system , IN DM system ,every thing went well.IF i see the detail tab in monitor under Processing .
Its is showing like this .
Transfer Rules : Missing Massage.
Update PSA : missing massage.
Processing end : missing message.
I have checked the coding in update rules, everything is ok.
Plz any inputs.
hari
Message was edited by:
hari reddy

Might means that IDocs flow is not defined properly in your QA system for myself-SourceSystem.
Regards,
Vitaliy

0CCA_C11 Infocune : Update Rule Migration Error

Hello,
I have installed the cube 0CCA_C11 from the standard BI content and started the migration of the update rule.
Here, i am getting an error in one routine. There is one field in the cube "0CO_REPLINE", which is mapped with all fields of infosource.
there is a routine on the field 0CO_REPLINE.
when i tried to migrate the update rule it will give me following error.
Rule (target: 0CO_REPLINE, group: 01 Standard Group): Syntax error in routine
And when i cheked the routine it will give the following error
E:The type "_TY_S_SC_1_FULL" is unknown
Please guide me and suggest.
Regards,
Macwan James.

Hi ,
There is a small change inthe routine whichi your have to do.
Here is the code for the routine. Hope this helps
$$ begin of routine - insert your code only below this line -
Data:
 COMM_STRUCTURE type tys_TG_1_full,
 l_subrc type sy-tabix,
 l_abort type sy-tabix,
 ls_monitor TYPE rsmonitor,
 ls_monitor_recno TYPE rsmonitors.
REFRESH:
 MONITOR.
Runtime attributs
 SOURCE_SYSTEM = p_r_request->get_logsys( ).
 MOVE-CORRESPONDING SOURCE_FIELDS to COMM_STRUCTURE.
Migrated update rule call
Perform routine_0002
USING
 COMM_STRUCTURE
CHANGING
 RESULT
 l_subrc
 l_abort.
*-- Convert Messages in Transformation format
 LOOP AT MONITOR INTO ls_monitor.
 move-CORRESPONDING ls_monitor to MONITOR_REC.
 append monitor_rec to MONITOR.
 ENDLOOP.
 IF l_subrc <> 0.
 RAISE EXCEPTION TYPE CX_RSROUT_SKIP_RECORD.
 ENDIF.
 IF l_abort <> 0.
 RAISE EXCEPTION TYPE CX_RSROUT_ABORT.
 ENDIF.
$$ end of routine - insert your code only before this line -
ENDMETHOD. "compute_0CO_REPLINE
Regards,
Macwan James.

Updating the last date request from ODS to CUBE

Dear Friends,
Please can someone explain me.
i allways update request from ods to cube, sometime there will be 3 to 4 request in the ods which wont have the Data mart (Tick) and when i update it to the cube. i can only see 1 request which is current date request. i dont know whether the previous days request has been updated to the cube.???
but i see in the ODS that all the data mart (tick) is available for all the request.
And please can someone explain me, if i have many request in the ods, current date previous day and so on.
Is there any way to update in such a way, where i can see all the dates in the Cube instead of only 1 request with current date in the cube.
when i delete the request from the cube and remove the tick from the ods, and refresh, then suddenly the current request and all the previous request TICK will be gone...
Thanks for your help.
will assign complete points.
Thank you so so much

Hi,
if you know everday how many request are getting updated in infocube as one request the you can check the added records in infocube .. it should be equal to the sum of all those request ..
but transferred can be more or equal .. also its depends on the
update rules ..designing ..
Hope this helps you ..
Regards,
shikha

Error while loading from ODS to CUBE

Hi guys,
I am loading data from source system to ODS and from ODS to CUBE. Ok. The data came successfully from Source System to ODS. But while coming to ODS to CUBE it is showing some error at Data Packet 13. Ok. In CUBE, I loaded the data by using update ODS data to data target, at that time it shows two options like FULL UPDATE and INIT UPDATE. Then I selected FULL UPDATE and then I checked in processing tab there is only one option enabled i.e. only data target. OK and then I loaded it. Now after getting the error where I can correct it. There is no PSA option in monitoring.
Other wise how I can change option in Processing tab of infopackage for PSA. But I know one point that when we load the data from one target to another the only one option available in processing tab is only data target. How can I change that option and how can I correct the error.
Thanks
Rajesh

Hi,
i solved my question like the following.
Go to monitoring of the CUBE and select the option "read every thing as manually" -> then it shows another screen for correcting the records -> correct all the records and load the data again. ok
Thanks
Rajesh

Error when loading from ODS to Cube

Hello Friends,
I am having trouble loading data from ODS to Infocube in my 2004S system.When loading data i get this message
07/03/2007     13:10:25     Data target 'ODSXYZ ' removed from list of loadable targets; not loadable.
07/03/2007     13:28:42     Data target 'ODSXYZ ' is not active or is incorrect; no loading allowed
I checked for ODSXYZ in my data target but there is nothing by that name.Even the infopackage doesnt have it.What needs to be done.Please help.
Thanks.

Its a expected behavior. When you migrate ur DS, the infopacks associated with it, will grey out all the data targets that they were feeding before, that applies to any infopack you create even after the migration. You womt be able to delete it.
Having said this, this shouldnt impact ur loads from ODS to Cube. As this shoudl be taken care of by ur DTP's rather than ur infopacks.
A few questions:
How are you loading ur cube?
Did the data get thru fine to PSA with the infopack in question?
How did you load ur DSO(assuming the load was successful)?
Message was edited by:
        voodi

Error when trying to load data from ODS to CUBE

hi,
Iam getting a short dump when trying to load data from ODS to CUBE. The Run time error is 'TYPELOAD_NEW_VERSION' and the short text is 'A newer version of data type "/BIC/AZODS_CA00" was found than one required.please help me out.

Hi,
Check this thread.........Ajeet Singh has given a good solution here.........
Re: Error With Data Load-Getting Canceled Right Away
Also check SAP note: 382480..................for ur reference............
Symptom
A DART extraction job terminates with runtime error TYPELOAD_NEW_VERSION and error message:
Data type "TXW_INDEX" was found in a newer version than required.
The termination occurs in the ABAP/4 program "SAPLTXW2 " in "TXW_SEGMENT_RECORD_EXPORT".
Additional key words
RTXWCF01, LTXW2U01, TXW_INDEX
Cause and prerequisites
This problem seems to happen when several DART extraction jobs are running in parallel, and both jobs access table TXW_INDEX.
Solution
If possible, avoid running DART extractions in parallel.
If you do plan to run such jobs in parallel, please consider the following points:
In the DART Extract configuration, increase the value of the parameter "Maximum memory allocation for index (MB)" if possible. You can estimate reasonable values with the "File size worksheet" utility.
Run parallel DART jobs on different application servers.
As an alternative, please apply note 400195.
It may help u.........
Regards,
Debjani.......

Date load error From ODS to Cube?

Guru's,
Here is a status of data load and suggest me.
Actually we are loading data from ODS to Cube which is full load.This loading is done thorugh process chain and it is loaded for every half an hour.Every time the earlier load will be deleted and next load will be taken to cube.Two days ago the load had gone wrong.When I tried to see cause for the failure in Monitor details I could see Update missing and processing missing.When I see in process chains log view I got info stating some invalid characterstic had appeared.But when I search in PSA the whole of the data packets are green.If there is any invalid characterstics PSA should show a red status.But it is not showing.Please guide me how could I solve this?
point will be definitely awarded for the proper answers.
Thanks in advance.
vasu.

Hi Vasuvasu
Once the edit is done and reloade the sata it wont show u the records in Red..
Hope itz Helps..!
Regards
KISHORE M REDDY
**Winners Don't Do Different things,They Do things Differently...!**
> I dont whink this is with Disk space Y because after
> every full load we are deleting data.

Problem with update from ODS to Cube

Hi All,
I had an issue, when i was loading from ODS to Cube everything was fine except one data package failed coz of some object locked( User : myself, though i wasn't running anything else except this), but i check in SM12 no locks exist for that particular time.
apparently the load failed coz of this single package, its a load from ODS to Cube, so no chance of Manual update from PSA.
any suggestion: do i have to repeat that load all over again( sucks !!! it is for 40 mil)
Regards,
Robyn.

Hi Hoggard
Check the Job log fro ur Job in the SM37 and check for that Datapackage is there any thing failed liek
"ARFCSTATE-SYSFAIL" if this is there .. it means its an Deadlock .. please check the ST22 dump...
U can use the PSA...
1) go to the 8ODS infosource and copy the Delta IP
2) check the option in the processsing as Update PSA and the subsequently into the data targets
3) Schedule the IP manually
hope it helps
regards
AK

Update Rule Migration from ODS to Cube --Error

Similar Messages

Maybe you are looking for