Update rules - Activation error - in cube 0PAPA_C02
Hi All,
When i am activating the update rules of 0PAPA_C02 cube, i am encounting the following error for key fig "Headcount Change FTE Employee".
Empty or invalid formula 8RFPFLULBJGBAO07IDMZGMPXR.
Please let me know your thoughts.
Thanks & Regards,
Eswari.
Hi,
And also make sure that <b>all</b> target fields has proper maapings. i.e either a direct assignment with source field,or routine or formula or constant. Some times sytem shows a routine as update method but blank routine. It happens after,when you include a field to data target or coping the update rules.
Most of the time, you can solve this type of error by studing very carefully the existing mappings(routines,formulas).
With rgds,
Anil Kumar Sharma .P
Similar Messages
-
RSAU466 : Update rule Activation error
Hello Guys,
We upgrated BW3.5 to BI7.0 SP13
We're facing problem on Update Rule activation
the message is an RSAU466, I have locked for solution on service sap, they suggering to run SP13, but we're already on SP13
Any one have an idea ?I recreated the update rule
-
Hi all:
I had add a new key infobject to an existing ODS (the ODS is empty) and then I active the ODS, all runs properly. Now I modify the update rule to fill the new added infoobject with a constant. When I try to active the update rules, the system returns RSAU206 error. No routine has been created for InfoObject & (data field: &) but the infoobject hasn´t routine. Can anyone help me?
Thanks in advance
AbelHI Diego:
I just checked one by one all routines in update rules and all of them are rights. I try to display activated program ( in extras menu) and itsn´t appear. This is not the first time happend, sometimes when I add a new infoobject to an existing ODS I have problems to active the update rules. The only way taht I know is delete and make again the update rules.
Thanks -
Hi guru's,
I changed the update routine for one of the infoobject and tried to activate it again.But it is giving error message "message_type_x".the message number it is giving as 108.
can anyone help me on this.This is the new rouine i modified.
SELECT SINGLE BILL_TYPE FROM /BIC/AZOOBK00 INTO UR_Billingtype
where DOC_NUMBER = COMM_STRUCTURE-DOC_NUMBER
and bill_type NE space.
It is telling that <b>datafields are already updated for infosource zdil_vl with move</b> .
the error number it is giving for this dump is 108 of RSAA class.
I dont no how to check apart from this. can u pls help me. -
Update rules installation error for BI statistics
Hi all,
I am trying to activate the update rules for the BI statistics cubes and am getting the below error.
"Object Update rules CSE83E58JTY9E8RQFR74SB5P3: Error installing the Content version
Message no. RSO431"
I am able to install the cubes and info sources/data sources but not the update rules.
Our system is on below versions:
SAP_BW 701 0004 SAPKW70104
BI_CONT 703 0014 SAPKIBIIQ4
Please guide if you have come across into the same.
Thanks,
RamanaI think you're going to have to open an SAP Message for this issue. There is an OSS Note that perfectly matches the description of the error you're getting, but because you're on BI 7.0 EHP1, the change in that OSS Note is already made in the affected Class and Methods.
-
Regarding update rules activation in inventory management(2LIS_03_BF)
Hellow gurus,
i am working on inventory management with snap shot scenario for that we are using 3 business content datasources they are (2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM), now i want to activate the update rules for infosource(2LIS_03_BF) & cube, when i check the update rules it shows every thing is ok, but not activating ,please could you give me the suggestions
Regards,
Chandra.bf setuptable filling based on posting date
give the posting date and give the name of job run
give the termination date and time
execute in background.you you can start the more jobs
depending on your data.you have bulk data you can divide the
jobs in based on posting date.
after that check the status in sm37. -
Hi,
Can some help me out for ODS (0SD_O03) update rules activation,I am not finding any thread related to this issue.
Please donot suggest for RSAU_UPDR_REACTIVATE_ALL prg.It is for only Infocube update rules activation
Thanks,
PraveenHi Praveen,
RSAU_UPDR_REACTIVATE_ALL program is not only for InfoCubes update rules activation. You can activate any update rule through this program.
In program
S_UPDID give updaterule technical name such as(CONA85AOASV0HQ3B8I6E2EBJM)
S_TARGET give 0SD_O03
S_SOURCE give infosource name -
Formulas in Update rule active Program
Hi,
I would like to know whether is it possible to see the formulas applied in the update rule active program generated .
for exampkle: (IF TRANINDIC = 0, NET_VALUE,0).....This formula has been applied for a specific kefigure in update rule.
I just wanted to see the above formula in the update rule activer progrma...so is it possible to see....if it is possible please let me know some tips and tricks to check the same.
Thanks
SujanHi,
In rsa1 open upadate rules. and in the main menu. check for option generated program under menu options.
you can get the program. -
Update rules activation giving dump
Hello
I have inserted three new characteristics in already created cube and tried to activate the update rules but it started giving dump error.
To get back to original conditions, I have deleted newly inserted infoobjects but while activating update rules it is still giving dump error.
Can any one help with this issue?
there is no syntax error.Hi abhishek,
First delete the contents of the cube , and then delete the inserted characteristic. Now, you will be able to delete the new characteristics.
Regards,
Krishna. -
Update rules Activation Problem
Hi,
Iam getting the error while transporting the update rules to production,saying error mesage,
Start of the after-import method for object type R3TR UPDR (Activation Mode)
Update rules 4AR6MO7P6M428KB2RPA65E9EX read in version M
Error when activating update rule 4AR6MO7P6M428KB2RPA65E9EX
Activation of the update rules for ZCG_O15 ZBW_CRTDN
IC=ZCG_O15 IS=ZBW_CRTDN error when checking the update rules.
from Dev to QA successfully transported and data hasbeen loaded with out any issues,
I didnot changed any thing in ODS,I Just created the new infosource with only two characteristics and created the update rules direct updating,with out any routines.
I activated the update rules in Dev couple of times and transported to PD,but every time it is giving same error,there was no issues upto QA,
Please suggest anybody how to resolve this issue.
Thanks
BI USERHi
Thanks for your replies,
Iam checking from transport request error log,iam getting error message as I mentioned in my question,
iam not getting detail information on error log,Update rules are available in PD system but in inactive state,
I did the Update rules check it is giving message 'no erreors found in update rules'.
I collected all dependent objects from transport collecter,still same error,I tried from Program
RSAU_UPDR_REACTIVATE_ALL,but my PD system is in not modifiable state.
Thanks -
"update rules inactive " error when importing transport request
Hi experts,
I am stuck while importing transport request of update rules. I am moving transport request of update rules from 1 system to another and stuck while importing it in 2nd system. Only two update rules are stuck among all giving an error of "inactive update rules".
I have again tranported it twice after activating theose two update rules.
Please help!!!!!Hi Heena,
Can you provide more details of the issue like is it a DSO to DSO transformation, error message etc. -
Message RSAU466 when update rules activation
Hi everybody,
I did some corrections in an ABAP routine in update rules. When I try to activate them this message appears :
Message no. RSAU466
Diagnosis
When generating the update program for data target XXXXX, InfoSource YYYYY, a syntax error occured in row 1.980.
System response
The update rules cannot be activated.
Procedure
If the error message Incorrect logical expression. is cut off, do the following to get the complete error message:
Go into the update rule maintenance, choose Extras -> Display Activated Program and carry out a syntax check there. You can then find out what the error was.
I've tried to display the acitvated program but this message occurs : Unable to find a tool to process the request
I don't want to delete and recreate my update rules because thes are very complicated and it's very risky.
Any idea ?
Edited by: maredami on Jun 11, 2010 1:55 PMThanks for your help !
RSAU_UPDR_REACTIVATE_ALL doesnt work (No message exists).
I've already seen these notes but we don't want to import support packages...
I've found the generated program of the update rules (GPxxxxxxxxxxxx) and at the line 1980 that is wrote : S_COB_PRO_PLANT TYPE RSD_S_COB_PRO.
I have no idea what to do now... -
0CCA_C11 Infocune : Update Rule Migration Error
Hello,
I have installed the cube 0CCA_C11 from the standard BI content and started the migration of the update rule.
Here, i am getting an error in one routine. There is one field in the cube "0CO_REPLINE", which is mapped with all fields of infosource.
there is a routine on the field 0CO_REPLINE.
when i tried to migrate the update rule it will give me following error.
Rule (target: 0CO_REPLINE, group: 01 Standard Group): Syntax error in routine
And when i cheked the routine it will give the following error
E:The type "_TY_S_SC_1_FULL" is unknown
Please guide me and suggest.
Regards,
Macwan James.Hi ,
There is a small change inthe routine whichi your have to do.
Here is the code for the routine. Hope this helps
$$ begin of routine - insert your code only below this line -
Data:
COMM_STRUCTURE type tys_TG_1_full,
l_subrc type sy-tabix,
l_abort type sy-tabix,
ls_monitor TYPE rsmonitor,
ls_monitor_recno TYPE rsmonitors.
REFRESH:
MONITOR.
Runtime attributs
SOURCE_SYSTEM = p_r_request->get_logsys( ).
MOVE-CORRESPONDING SOURCE_FIELDS to COMM_STRUCTURE.
Migrated update rule call
Perform routine_0002
USING
COMM_STRUCTURE
CHANGING
RESULT
l_subrc
l_abort.
*-- Convert Messages in Transformation format
LOOP AT MONITOR INTO ls_monitor.
move-CORRESPONDING ls_monitor to MONITOR_REC.
append monitor_rec to MONITOR.
ENDLOOP.
IF l_subrc <> 0.
RAISE EXCEPTION TYPE CX_RSROUT_SKIP_RECORD.
ENDIF.
IF l_abort <> 0.
RAISE EXCEPTION TYPE CX_RSROUT_ABORT.
ENDIF.
$$ end of routine - insert your code only before this line -
ENDMETHOD. "compute_0CO_REPLINE
Regards,
Macwan James. -
Cannot Create Update Rule from Infosource to Cube
Hello;
I am a beginner to BI and am learning. This may be a very basic question, but I got stuck.
In the create update rule screen, I get an error message that says
Data Source (whatever the name is) not maintained. (check your entries)
Could some one help as to where I went wrong?
Thx,
Sushma
SuGoto your InfoSource and open DataSource Structure and transfer structure. Check if the structure is correct, make the necessary changes if required and activate it. Then create update rules providing correct infosource name. Until you create /activate your transfer structure, you won't be able to create update rules.
Reward point if helps.
Regards,
Ashok
Message was edited by:
ashok saha -
Hi Gurus,
i have changed a datasource and an <b>ODSA</b>
and this <b>ODSA</b> which also acts as a datamart to <b>ODSB</b>
so i have transported, transfer rules, transfer structure, infosource, update rules of <b>ODSA</b> and also the
update rules of <b>ODSB</b> as well
And before realsing the request into quality i have replicated the datasource from R/3 as well and then realsed this request to Quality everything is active like transfer rules, infosource, transfer structure
<b>ODSA</b> update rules
But the <b>ODSB</b> update rules are not active kindly tell how to make them active.
so again i have regenerated the export datasource and then again i transported only update rules of
<b>ODSB</b>.
but still the update rules are inactive, kindly someone guide me how to make them active
as i have to send this to production which is having 4 years of historical data so please kindly
help me.
thanks and regards
HarishHi A.H.P, vishvesh, anil, and buvanna
thankyou guys for your info and support i tried all that u have said
except activating them manually...as it is urgent i am going with manually activating
and vishvesh i could do check the update rules by basis help. thanks for that
A.H.P i have manually activated the update rules its working fine, so i am praying that everything should be fine in production as i have requested to have permissions to activate in prd as well
thankyou very much for all the support.
i am relieved that i have at last solved it
thanks and regards
harish
Maybe you are looking for
-
How do I use my mid 2010 iMac as display with mid 2011 macbook pro?
I have a mid 2010 iMac and I want to use it as a display for my mid 2011 macbook pro. The iMac has a mini display port and the macbook has a thunderbolt port. Does anyone know if this is possible and what I need to make it possible? Cheers! -Sean
-
Is HTML's image mapping in OWA not supported?
We compose a mail inserted with a HTML page which contains a image devided into serveral parts by using <map> and <area> tages. People received mail can follow the hyperlinks set in the different part of the image to be directed to various web pages
-
Our WMS 2011 Premium server boots and then after the association of the mouse and keyboard the screen saver starts and then simply moves when the mouse moves or the keyboard is touched. There is no way to get around the screen saver and the system
-
Floor Plan Manager - GAF configuration
Hi Experts, In my application, I have only one WINDOW and three views. While configuring teh GAF, I get the option to enter the window name only. So I create three main steps. However while execute the application and click on main step2, it still sa
-
Warum wird die Zeichenkodierung nicht automatisch erkannt?
In einer Webseite erscheinen die berühmten "Fragezeichen". Obwohl diese Seite ausdrücklich ISO-8859-1 "anfordert", bleibt die Auswahl in Ansicht stur UTF-8. Noch sonderbarer ist es, dass die Zeichen überhaupt verkehrt angezeigt werden, da diese von d