Update rules are inactive

Hello All,
i have added another dimension 0mat_unit to the existing infocube of multiprovider to create a report.
As i added new dimensions underlying update rules became inactive and when i try to activate them iam getting message IC=xxxx IS=yyyy error when checking the update rules.
can you please give ur advice to solve the problem

Hi,
When you add some new objects to your cube then you have to add them in your info source and data source in order to get correct data and if you dont want to populate data to them from source then you can have your own rules like routines and formulas so please add them to comm structure and transfer structure and map the rules and then try to activate them it will work,
Thanks,
Pavan.M

Similar Messages

0PS_C02 update rules are not getting activated when i install 4rm BI conten

Hi All,
In BI Dev. sys for PS module- Project System - Dates 0PS_C02 cube- update rules are not getting activated when i install from the business content and its giving the error " IC=0PS_C02 IS=0PS_DAT_PRJ error when checking the update rules Message no. RSAU461" .
I deleted the inactive update rules(6 nos) and installed again from BI Content, then the same issue raising.
Can anyone help me out as i stuck up with this to move to go-live.
Thanks,
Sakali

Hi Vassu,
here are some of the reasons for getting error in update rules activation.
1. Check the formula or routines that are used in Update rules and check is there any syntax errors.
2. check whether the mappings are correct or not.
3. check the info objects which ur used for mapping are in active or not..
(or) if the info object may be deleted which ur using for mappings.
Thanks
Sai Chand.

Update Rules gets inactive automatically

Hello All,
After the transport of the Update rules with the related objects to the not modifiable system, everything works fine for some time. But after sometime many update rules gets inactive automatically. We hav'nt changed the Info provider or transported any thing.
We are in BI 7.0.Can any one help me to analyse this issue.
Thanks,

Hi,
This problem may ocurs due to dependecies on the objects that you transported, any way you can activate them using the below Program,
Go to SE38
Run the program : RSAU_UPDR_REACTIVATE_ALL
Give the necessary details and execute the Program.

Transfer Rules are Inactive in BI 7.0

Hi,
I installed info bjects from Business Content, after installing transfer rules are inactive for project claims(0PS_CLM_CST). I am getting this type errors, object 0PS_CLM_CST Object version not found in table.
and also i am running the program in se38 (RS_TRANSTRU_ACTIVATE_ALL) It is showing errors.
Object 0PS_CLM_CST object version not found in table
Object 0PS_CLM_CST object version not found in table
Transfer structure 0PS_CLM_CST_BB NOT activated successfully Activate manually.
Please provide me solution.

>
subba reddy wrote:
> Hi,
>
>
> I installed info bjects from Business Content, after installing transfer rules are inactive for project claims(0PS_CLM_CST). I am getting this type errors, object 0PS_CLM_CST Object version not found in table.
> and also i am running the program in se38 (RS_TRANSTRU_ACTIVATE_ALL) It is showing errors.
> Object 0PS_CLM_CST object version not found in table
> Object 0PS_CLM_CST object version not found in table
> Transfer structure 0PS_CLM_CST_BB NOT activated successfully Activate manually.
> Please provide me solution.
Hi,
After running the above program,catchup your infosurce and do manually activation of your transfer rules and updates as well,if present.
check whether all the InfoObjects are mapped correctly and the status is active or not.
Hope it helps...

Update rules are not active

update rules are not active when transported to quality.
what can possibly be the error. where to check and correct this issue ?
thanks,
Amit

Amit,
In your update rules ,i hope there some start routine of update routines couls be there and those rotines didn't transported successfully .Check your update rules in DEV
Regards
Prasad

Transfer rules are inactive in BW Production system

The transfer rules are inactive in BW(Production) for the datasource 0FI_GL_4. I tried to activate by executing a program "RS_TRASNSTRU_ACTIVATE_ALL" and another option by moving transport request from Quality to production( I have done the replicate datasource as well). In the quality system the data flow is ok to ODS(0FIGL_O02). but in Production not able to activate the transfer rules. please suggest me the best practice.
Regards,
Leo.

Hi,
Whenever we get such an error, we first need to check the Transfer Rules (TR) in the Administrator Workbench.
Check each rule if they are inactive. If so then Activate the same.
You need to first replicate the relevant data source, by right click on the source system of D/s ->Replicate Datasources.
Now execute the following ABAP Report Program u201CRS_TRANSTRU_ACTIVATE_ALLu201D.
It asks for Source System Name, InfoSource Name, and 2check boxes. For activating only those TR/TS which are set by some lock, we can check the option for u201CLOCKu201D. For activating only those TR/TS which are Inactive, we check for the option for u201COnly
Inactiveu201D.
Once executed it will activate the TR/TS again within that particular InfoSource even though they are already active.
Regards,
Suman

Update rules are red..?

Hi Guru's ,
The update rules for a particular currency fields are not gree in update rules when we are updating the data from ODS to Cube.There two currency fields which are associted with a currency fields one is with 0currency and other one is 0crm_currency.It is avialable in ODs and also in the cube.
What might be the reasons for the update rules to be in red status,
Thanks in advance.
vasu.

Hi
From the error, it is clear your mapping is not done for that particular infoobject
You just press any infoobject mapping..go to charecteristics tab...here you are supposed to write a routine for that infoobject depending on your requirement
Or give it as initial value or give some constant date if routine is not applicable for your business requirement...then it will become green
Hope this helps
Bye
N Ganesh

Updates rules are not active when transported from developmet to quality

Dear friends,
I had made some in changes in strat routine in update rules BW development and saved in request and transported to qaultiy
se09-child request -parent request -
In bw testing I have activated the update rules and saved in different request but I now updates rules not acitve .
Please suggest me where ihave gone wrong ..
Regards
shekar reddy

Hi Sriram,
Download the below documents for reference related to Transports
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50b1d20e-c1e8-2c10-d9b9-d48eb3a83d89
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/205caa59-a948-2e10-b397-9ccafd3d4f5b
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/2050db8b-9d90-2c10-2980-b13a4b0938f6
Regards,
Venkatesh

Urgent....Transported Update rules active version but still not active....

Hi Gurus,
i have changed a datasource and an ODSA
and this ODSA which also acts as a datamart to ODSB
so i have transported, transfer rules, transfer structure, infosource, update rules of ODSA and also the
update rules of ODSB as well
And before realsing the request into quality i have replicated the datasource from R/3 as well and then realsed this request to Quality everything is active like transfer rules, infosource, transfer structure
ODSA update rules
But the ODSB update rules are not active kindly tell how to make them active.
so again i have regenerated the export datasource and then again i transported only update rules of
ODSB.
but still the update rules are inactive, kindly someone guide me how to make them active
as i have to send this to production which is having 4 years of historical data so please kindly
help me.
thanks and regards
Harish

Hi A.H.P, vishvesh, anil, and buvanna
thankyou guys for your info and support i tried all that u have said
except activating them manually...as it is urgent i am going with manually activating
and vishvesh i could do check the update rules by basis help. thanks for that
A.H.P i have manually activated the update rules its working fine, so i am praying that everything should be fine in production as i have requested to have permissions to activate in prd as well
thankyou very much for all the support.
i am relieved that i have at last solved it
thanks and regards
harish

Update rule activation......

Hi,
I have added one of the fileds in ODS. This ODS gets data from 6 ODS.
All the update rules got deactivated.
Any reason why?
what we have to do ?
Will all the activation of all the update rules need to get transported again?
Thanks & Regards,
Jeetu

Hi,
BW don't know if/how this field should be updated from 1 or several of the 6 ODS'es. Therefore the update rules are inactive and you have to activate them AND updatethe new field if you want or set it to initial if you don't want to update it.
And yes, you should then transport this.
Kind regards
/martin

"update rules inactive " error when importing transport request

Hi experts,
I am stuck while importing transport request of update rules. I am moving transport request of update rules from 1 system to another and stuck while importing it in 2nd system. Only two update rules are stuck among all giving an error of "inactive update rules".
I have again tranported it twice after activating theose two update rules.
Please help!!!!!

Hi Heena,
Can you provide more details of the issue like is it a DSO to DSO transformation, error message etc.

What are the special conversions for time in update rules?

What are the special conversions for time in update rules?

Hello,
Special conversions for time in update rules are automatically conversion rules.
Example: If the cube contains calendar month and your transfer structure contains date, the date to month is converted automatically.
Assign points if this helps,
Regards,
Jorge Diogo

UPDATE RULES INACTIVE WHEN BI CONTENT INSTALL

Hi,
When i activating business content update rules are not coming as active.
when i raise OSS note to SAP the following suggession given.
editing the UPDRs, and changing the update method from the Time Ref. tab.
how to edit update rules, from time Ref tab there is routine, for 0cal year/month i need assign source field in time ref. tab.
what is the code for it please let me know/ how to resove the issue.
unless i write the code / assiging the source field the update rules cannot be activated.
Thanks,
Sakali

Hi,
You can easily edit your update rules by getting into change mode.
Step 1: Double Click on your KF relevant Ty column
Step 2: After doing necessary mappings in KF Calculation Tab, Chars Tab
Step 3: Click on Time Ref Tab and again click on Method of your Time Char
You need to be careful about How you want to map your Time Chars. It depends on your business logic. Discuss with your Functional team or please cross check with your Blue print before you map any fields.
Regards,
Suman

Updates rules inactive after add KF

Hi experts,
we have to add aditional key figures to a infocube that is already in Q and P systems (with data).
Now we are not being able to transport the update rules to those systems.
Correct me if i'm wrong but if you add aditional characteristic's or key figures you don't need to delete data in the infoproviders in the ohter systems.
we have already try to transport:
cube and then update rules;
all together cube and update rules
in both cases it fails.
thanks in advance for any sugestion

Varadarajan, our database is in SQL the spaces requirements that you refer are the same for this scenario? The fact table for this infop is 43G in Q system and our database have enough space.
am i making this analysis ok including the Db space?
Praveen the update rules are not datamart's.
The transport ends with a 8 code and for each update rule inlcude gives the message:
Update rules 2237DNCKOFJ13SFIK2PT581MQ read in version M
Error when activating update rule 2237DNCKOFJ13SFIK2PT581MQ
Sadeesh, all necessary objects are in the destiny system and no modifications were made at infosource/data source level.
Thank you all for the answers.

Update rules Activation Problem

Hi,
Iam getting the error while transporting the update rules to production,saying error mesage,
Start of the after-import method for object type R3TR UPDR (Activation Mode)
Update rules 4AR6MO7P6M428KB2RPA65E9EX read in version M
Error when activating update rule 4AR6MO7P6M428KB2RPA65E9EX
Activation of the update rules for ZCG_O15 ZBW_CRTDN
IC=ZCG_O15 IS=ZBW_CRTDN error when checking the update rules.
from Dev to QA successfully transported and data hasbeen loaded with out any issues,
I didnot changed any thing in ODS,I Just created the new infosource with only two characteristics and created the update rules direct updating,with out any routines.
I activated the update rules in Dev couple of times and transported to PD,but every time it is giving same error,there was no issues upto QA,
Please suggest anybody how to resolve this issue.
Thanks
BI USER

Hi
Thanks for your replies,
Iam checking from transport request error log,iam getting error message as I mentioned in my question,
iam not getting detail information on error log,Update rules are available in PD system but in inactive state,
I did the Update rules check it is giving message 'no erreors found in update rules'.
I collected all dependent objects from transport collecter,still same error,I tried from Program
RSAU_UPDR_REACTIVATE_ALL,but my PD system is in not modifiable state.
Thanks

Update rules are inactive

Similar Messages

Maybe you are looking for