Update Rules changes from 1 ODS to another disappear upon activation

Dear Experts,
We have encountered a situation whereby we have an update rule from ODS feeding a field update to another ODS. 
This update rule change works correctly as I have debugged it and you can see the resultant changed in the new (40) table.  But upon activating this change, the field change disappears.
Can anyone provide an explaination and how I can go about fixing this ?
Thanks
Craig

Hi,
If the data source support deltas and we load the data into ODS then the update type for the keyfig. Amount and the quanty always Choose as "Addition" .So you change the update type for that KF as Addition .
Thanks & regards,
venkata sharma.

Similar Messages

  • Update Rule Migration from ODS to Cube --Error

    Hello SAP Experts,
    I am triing to migrate Update Rule (from 3.x to 7.0 transformation) from DSO 0QM_DS01 to Cube 0QM_C12 and i am getting error.
    Error message:
    Internal error: 32 0NOTIFICATN 01 Standard Group MASTER - Contact SAP.
    Similary with another update rule migration from DSO 0QM_DS02 to Cube 0QM_C13 .
    Error message:
    Internal error: 41 0NOTIFICATN 01 Standard Group MASTER - Contact SAP.
    I dont have any clue about the error message. Need your help to figure it out the issue.
    Thanks in Advance.
    Lasya.

    MR..V.. you are the man... my problem has been solved.
    Anyway my problem has been solved.. do you mind asking one more question regarding the above error?? how did you think about the above solution.. just changing it from read master data --> direct assingmen then back to read master data.. Please tell if i come accorss anything in future shall i follow the same.. please tell me..
    I have assigned full points to you.
    Thanks for all your help.
    Lasya.

  • How to publish infopath list form changes from one environment to another

    How can we move InfoPath customized list form changes from one environment to another example Development environment to UAT environment? We can save that as source file and update url on the .xsn file. But is there any other way we can do it?
    Rajasekar A.C

    Hi,
    You can save the list as template in source environment. Download the template for List Templates, upload in the same location in Destination site. The customized infopath should go with it. Let us know if that doesnt work.
    Regards, Kapil ***Please mark answer as Helpful or Answered after consideration***

  • Advice on Promoting Master Data Services Changes from one environment to another, e.g. DEV to UAT

    Hi,
    Has anyone got experience of creating a script to promote Master Data Services changes from one environment to another, e.g. Development to Production please?
    The changes basically consist of adding several new MDS members which can be accessed via Excel.
    Thanks in advance,
    Kind Regards,
    Kieran.
    Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

    In MDS terminology an Entity is metadata, and Entity Members are the data. 
    Typically changes to an Entity (ie model design changes) are promoted to different environments.  Model design changes can be replicated manually in each environment or you can Export the model and Import it into the target environment.
    Adding, editing and deleting entity members is performed directly in each environment.
    If you want to selectively import data from a Dev environment, you can use staging.
    David
    David http://blogs.msdn.com/b/dbrowne/

  • Hi, I have a Iphone 4s and I have a problem because I can't change from one screen to another by dragging my finger, it does't respond, in addition to access to an icon I have to double click instead of one.

    I can't change from one screen to another by dragging my finger, it does't respond, in addition to access to an icon I have to double click instead of one.

    That's correct.  Unless you can magically unlock your 4S, you can't sync it.  It's broken.  Had you been using the phone properly, you would have been synching it frequently and would have had a recent backup from which to restore your iPhone 5.

  • [svn:osmf:] 11996: Updates and changes from the spec review for FMMLoader.

    Revision: 11996
    Revision: 11996
    Author:   [email protected]
    Date:     2009-11-19 11:12:19 -0800 (Thu, 19 Nov 2009)
    Log Message:
    Updates and changes from the spec review for FMMLoader.
    Modified Paths:
        osmf/trunk/framework/MediaFramework/org/osmf/proxies/LoadableProxyElement.as
    Added Paths:
        osmf/trunk/framework/MediaFramework/org/osmf/net/FMMLoader.as
    Removed Paths:
        osmf/trunk/framework/MediaFramework/org/osmf/net/ManifestLoader.as

    Hi
    I've Updated App Builder, gone back to the DPS App Builder portal, regenerated new zip and ipa files and downloaded them.
    I clicked the Application Loader 3.0 link, downloaded the latest Appication Version, clicked on the "Deliver your App" button, and submitted the newly built App that was built using 32.4.2 version. (All the app icons were listed as "stored on server" so I presume they are all ok). The .zip file appeared to 'deliver' to Apple successfully. I've tried to resubmit it but get ta "Redundant Binary Upload. There already exists a binary upload with build version..." error message, so presume the orginal binary upload was successful. I have no idea how I can get this app from the "prepare for submission", to "in review". The last time I thought I'd submitted this app I got as far as the "waiting for review" status, and no further.
    At the moment I don't have a"+" button in the Build section - as mentioned on page 66 of Adobe's Step_by_step_guide_to_dps_se.pdf.
    So I can't add the new .zip file to the iTunes Connect > My Apps portal in the Build section of the Versions tab.
    I have put a support email into Apple, but don't expect a reply any day soon.
    The problem with starting all the way back through the App wizard is that I really want to use all the same App Name, Bundle ID, and details etc.
    Do you mean, going back to the Folio Producer Panel, and building a whole new App?
    This process certainly isn't for the faint-hearted!
    HELP!

  • I changed from one iPhone to another and backed the first one up to the icloud. I have restored the content to my new iphone but cannot download the photos. Any advise will be greatly appreciated

    I changed from one iPhone to another and backed the first one up to the icloud. I have restored the content to my new iphone but cannot download the photos. Any advise will be greatly appreciated

    Welcome to the Apple Community.
    Photos and some other items are added back after the restore has completed, you may need to wait a while.

  • Update rule changes

    hi
    is there a way to compare previous & currently active Update rules ...somebody has changed the update rules and i have no clue what changes have been made ..
    i need to check changes to 0recordmode
    thanks

    Hi Koops
    Check the Update routine as well as field wise routine
    Click on any field in the update rules it will take to you to the another screen there u will click on the field  wise code u will know.Normally for our seek when ever changes are made @ that time we will put a comment along with the date.
    Hope it will clear.If not let me know for further.
    Regards
    RMK
    **No need to say assisgning pointz is the only way of saying thanx IN SDN**

  • Updating Config Changes from integration process

    Hi
    I've constructed a ccBPM integration process
    then put together the config in the integration directory
    If I then go back and make further changes to the ccBPM, the changes are not reflected in the Integration directory.
    How do I update the Integration directory with changes from the integration process, without creating a new integration process in configuration after every change?
    We are currently running PI 7.1
    thanks
    Geoff

    >
    Geoff Hall wrote:
    > Hi
    > I've constructed a ccBPM integration process
    > then put together the config in the integration directory
    >
    > If I then go back and make further changes to the ccBPM, the changes are not reflected in the Integration directory.
    >
    > How do I update the Integration directory with changes from the integration process, without creating a new integration process in configuration after every change?
    >
    > We are currently running PI 7.1
    >
    > thanks
    > Geoff
    Have you activate the updated Bpm?
    Edited by: spantaleoni on Jan 18, 2011 3:59 PM

  • Format changes from one computer to another.....how come?

    Just bought a new laptop.......I have been doing all my editing on the computer at home without a problem......all clips are saved in MPEG and everything works fine.....(ultimately posting them all on YouTube).  As I needed to get a new laptop anyway, I set it up so it would have plenty of giddyup to work on videos away from home.  When I copy the folder containing the video clips (all in MPEG) on the desktop at home and then copy the folder to the desktop on the new laptop, the clips have changed from MPEG to MOD format........This results in an error message when I try to preview the clip (in Windows Media Player) about being unable to find the app that created the clip......I can click "try it anyway" and the video will play but minus the audio.  I do all my previewing in Media Player to go through the clips quickly to sort out what I want to keep and what to toss out.
    Why would the format change from MPEG to MOD when I copy the files from desktop at home to laptop?....anyone have any ideas?.....is there a phone number at Adobe that anyone knows of with a human on the other end that may be able to answer if I can figure it out here.  Thanks for any suggestions.

    Welcome to the forum.
    Now,
    When I copy the folder containing the video clips (all in MPEG) on the desktop at home and then copy the folder to the desktop on the new laptop, the clips have changed from MPEG to MOD format
    This is a new one to me. I have never seen any version of Windows that would change the file extension of any file copied, regardless of whether it was over a network, or to a new drive/folder.
    Now, with the JVC cameras, their files are MOD and TOD (for HD material). Could you have copied the wrong folder? Otherwise, something really odd is going on. Could it be that you thought that you had copied a certain folder and actually got one with the same file names, but at the original level, when they were still .MOD?
    Good luck,
    Hunt

  • Block Diagram Changes from one computer to another.

    When programming in LabVIEW, I generally try to make my block diagrams as neat and orderly as possible. This gives the code a more professional look, as well as making it easier for someone else to quickly understand the program. However, I recently have started doing programming on more than one computer, and have found that my block diagram does not look the same from one computer to another (due to different monitor resolutions). Because of this, the nice, orderly block diagram that I made on one computer looks a bit jumbled on another. Is there any way to fix this, short of standardizing the monitor resolutions on every computer?

    One problem you might encounter is how the application font is rendered on different machines. All text-based diagram nodes (labels, property nodes, globals, locals,...) are affected (grow/shrink) if the font is not the same.
    LabVIEW, C'est LabVIEW

  • Code to sum up multiple record key figure values from one ODS to another OD

    We've got two ODSs: ODS1 and ODS2 and ODS1 feeds data to ODS2 through update rule.  In ODS1, multiple records could contain one same doc records and we would like to sum up a key figure value for these multip records with the same doc number in the update rule and populate a key figure (a sum-up value or total value) in ODS2 for this doc number.  We wonder how the code would look like.
    Welcome the valuable input!
    Thanks

    Hello Kevin,
    In this case there is no need of a code. As in ODS2, contract number is a key and PO is not a part of key, you can have update type for the key figure as "Addition". Value for that particular key figure will be added for all the recordes with same contract number irrespective of PO number.
    Hope it helps.
    Regards,
    Praveen

  • Time Quotas Updation when EE change from one grp to another group

    Hi Experts,
    Actually I have Two Quotas "A and B " in my Project will be updated based on EE Subgrp on monthly bases
    when EE change EE subgrp in the mid of Month will new quota get generated or not ?
    if Yes, how the process of Quota Updation please let me konw.
    Thanks
    Sreeni

    Hi
    Please make your Question more clear and Try to generate absence Quota through the Tcode pt_qta00 in Test mode and check the result.
    Regards
    Suresh.V

  • Database not updating with changes from SQL*plus

    I’m having some issues with updating my database. I want to delete some rows in a table that has 323 records, so I run the SQL in SQL*Plus. It tells me that I’ve deleted 222 rows. I then get a count of the number of rows in the table, and it tells me 101. But if I open another SQL*Plus window and get a row count, the original count (323) is what it says. The enterprise manager also tells me 323 records are in that table. Am I missing something here?

    Aimee-
    Until you 'commit' from the session you have issued the 'delete' statement, the other sessions will not be able to see the changes. In other words, the other sessions are getting you a read consistent view of the data.

  • Error while loading Delta request from one ODS to another

    Hi,
    I have 2 ODS . ODS1 is the source ODS and ODS2 is the target ODS. ODS1 has full loads daily
    I have initialised delta from ODS1 to ODS2 and i was loading delta on a daily basis.
    Today while loading from ODS1 to ODS2 it failed. Then i deleted the data from ODS2 (Target ODS) and tried loading again. But it again said 'No delta possible'. So i deleted the full loads from ODS1. But when i load again it says the previous delta is invalidated since the full loads in the ODS1 are deleted. Can anyone of you please let me know how to handle this situation without re-initialising.
    Regards,
    Pramod

    Hi,
    I am not sure if you can go ahead without initializing again.
    I feel you may not have reset the datamart before pulling the repeat delta. This was a mistake. On top of that you have pulled a Full request. It should have been ideally a full repair.
    If you still have that full request in target try converting that into full repair by using this SE38 > RSSM_SET_REPAIR_FULL_FLAG (Change a full request to full repair request )  .
    If it works you have a chance of continuing with your deltas. But you may have lost the last delta.
    If it doesnt work and you have not pulled any delta after that load you have two options to retrieve the delta.
    1. See if its in PSA. then pull from PSA and once done force request to green , next delta should be fine.
    2. If its not there try reset the datamart in source ODS and pulling the delta again.
    If both doesnt work you may need to perform full repair and then reinit.
    Thanks,
    JituK

Maybe you are looking for