Update rules, different source and target units (0BASE_UOM-- 0QVVMRA)

Hi,
I have a problem with update rules as I'm trying to map two keyfigures with different unit-types together. They are both kilograms (KG) but the source figure is defined as 0BASE_UOM and the target keyfigure is 0QVVMRA (Amount of sales).
How can I make this connection work? Do I have to use the 'Unit calculation in routine' -option or is there a more simple way? I a routine must ne written, please post an example or link to a thread which has one.
Thx!
-miikka

Hi,
The Problem is that you are trying to connect a Key Fig for Type Quantity with the Key Figure Amount.
The Amount Key Fig will have either 0CURRENCY or Fixed Currency.
Using Update Rules Coding you could transfer the Value but you will have problems with the Currency. You cant store a Unit like KG in 0CURRENCY.
Regards.

Similar Messages

The source and target structure have a different number of fields

Hi,
I am new to workflow and I am trying to create an attachment in Workflow (SAP ECC 6.0) and pass it through to a User Decision (User Decision works fine) however the workflow is failing on the attachment step with u2018The source and target structure have a different number of fieldsu2019. The bindings check ok. Please see details below.
I have used document u2018Creating Attachments to Work Items or to User Decisions in Workflowsu2019 by Ramakanth Reddy for guidance. Thanks in advance.
1) Workflow containers (SWDD)
WORKITEMID (import)
ZSWR_ATT_ID (export)
SOFM (export)
2) Task Container (PFTC)
1 Import parameter defined u2013 WORKITEMID (swr_struct-workitemid)
2 Export parameters defined
- SOFM (Ref. obj. type SOFM)
- ZSWR_ATT_ID (swr_att_id-doc_id)
Binding task -> Method
Binding for 1 parameter (import) defined
Task <- Method
Binding for 2 parameters (export) defined
3) Z BOR object created with a Method, Method Parameters and Event (SWO1)
1 import parameter defined
2 export parameters defined
Method calls FM SSF_FUNCTION_MODULE_NAME, CONVERT_OTF, SCMS_XSTRING_TO_BINARY and SAP_WAPI_ATTACHMENT_ADD
Workflow is triggered by FM SAP_WAPI_CREATE_EVENT, Return_code = 0
Event_id = 00000000000000000001
Test results
A) Triggered by ABAP/ FM SAP_WAPI_CREATE_EVENT - SWI2_DIAG results
Work item 14791: object <z bor object name> method <method name> cannot be executed. The source and target structure have a different number of fields (this message is repeated 3 times). Error handling for work item 14791. No errors occurred -> details in long text (message is repeated 3 times).
Message no. WL821, OL383, WL050 in long text
B) Z BOR Test method <execute>
Enter workitem id.
Runtime error - Data objects in Unicode programs cannot be converted. The statement "MOVE src TO dst" requires that the operands "dst" and "src" are convertible. Since this statement is in a Unicode program, the special conversion rules for Unicode programs apply.
In this case, these rules were violated.
Program                             SAPLSWCD
Include                                LSWCDF00
Row                                    475
Module type                        (FORM)
Module Name                      MOVE_CONTAINER_TO_VALUE
C) Z BOR Test method <debugging>
Enter workitem id.
SAP_WAPI_ATTACHMENT_ADD, return_code = 0, message_lines = Attachment created
both swc_set_element container work ok
Runtime error occurs after end_method executed. Data objects in Unicode programs cannot be converted.
D) Workflow test
Enter workitem id <execute>
Task started> Workflow log> Status = Error
Workflow errors in Attachment step (however Office document can be viewed in details for step).

Problem has now been resolved. Problem was related to use of swr_att_id structure and swc_set_element statement in BOR program - problem resolved by only setting w/f container to swr_att_id-doc_id.

Parametrized relation connections - don't work when source and target are different

Hi All,I have next problem:I am using parametrized relation connection firstConnection (user and (encripted)password are taken from parameter file). Here are values from param file: $DBConnection_source=firstConnection$DBConnection_source=firstConnection$ParamUser=svaba$ParamPwd=Dni32iRiH0Yjro1U04+RTC==  This is (source and target are same) working fine for years.
But now I need two different connection, i.e. source is (existing)   firstConnection and target is secondConnection. On both instances I have same user
  (svaba) with same password. I created second parameterized connection with user = $ParamUser    and password = $ParamPwd     Now, parameters are: $DBConnection_source=firstConnection$DBConnection_source=secondConnection$ParamUser=svaba$ParamPwd=Dni32iRiH0Yjro1U04+RTC== When run workflow, got error: ORA-01005: null password given: logon denied.I triede to change connections by entering values for password (not use parameters for password) got error: ORA-01017:invalid username/password:logon denied.When I am using same (parametrized) connection for source and target (any of these two) everything is fine. That is sign that connections are good. Does someone have any idea about this problem

Hi All,I have next problem:I am using parametrized relation connection firstConnection (user and (encripted)password are taken from parameter file). Here are values from param file: $DBConnection_source=firstConnection$DBConnection_source=firstConnection$ParamUser=svaba$ParamPwd=Dni32iRiH0Yjro1U04+RTC==  This is (source and target are same) working fine for years.
But now I need two different connection, i.e. source is (existing)   firstConnection and target is secondConnection. On both instances I have same user
  (svaba) with same password. I created second parameterized connection with user = $ParamUser    and password = $ParamPwd     Now, parameters are: $DBConnection_source=firstConnection$DBConnection_source=secondConnection$ParamUser=svaba$ParamPwd=Dni32iRiH0Yjro1U04+RTC== When run workflow, got error: ORA-01005: null password given: logon denied.I triede to change connections by entering values for password (not use parameters for password) got error: ORA-01017:invalid username/password:logon denied.When I am using same (parametrized) connection for source and target (any of these two) everything is fine. That is sign that connections are good. Does someone have any idea about this problem

Delta upload in different times and targets

Dear BW Gurus,
I have to fill a Master Data table with a delta (for performance reasons) from an ODS object, and later fill an InfoCube with the same delta from the same ODS Object. This two step approach is necessary because the Cube uses the Master Data filled in the first step - so I cannot do the two uploads within the same InfoPackage.
My approach was the following in a Process Chain:
1. Fill and activate "source ODS"
2. Load request from "source ODS" to PSA only
3. Update Material Master from PSA using "Read PSA and Update Data Target" process with the variant setting the PSA table and the Master Data InfoObject as Data Target.
4. Run "Attribute Change" process for the Master Data IO
5. Update InfoCube from the same PSA that was used for the Master Data InfoObject. This is also a "Read PSA and Update Data Target" process with the variant setting the same PSA table as before and now the InfoCube as the Data Target.
To me this seemed logical but when I run the Process Chain I got the following error message at point 3 (update Master Data from PSA): "No request for posting found in the variant".
This appears strange to me because if I specified the request, it would only work for the first upload and not for all the others.
Can anyone please help me how to overcome this issue of Delta upload in different times and targets?
Thanks in advance,
Attila

Gopi,
If I create two delta InfoPackages, the first one clears the delta queue, so the second InfoPackage won't find any data. This is unfortunately not the way to do...
Srini,
Your proposal is quite original - if I upload the same ODS with its data (amended by the date field) that would in fact generate a new delta for the same ODS.
However, in the meantime a more simple idea came up in our BW team, inspired by your proposal. For the uploading of the Master Data I now don't use the delta functionality of the ODS export Data Source, but instead I set up a full upload filtered for the actual date. This ensures the good performance of Master Data load (load time will not increase with time) and also we will have all recent Master Data uploaded from the ODS because that load is in the same Process Chain where the "Source ODS" is updated. Later in the same Process Chain I simply start the delta upload for the Cube.
Thanks a lot for all your help.
Attila
P.s. I will be out of office for until 24th July.

Issue in mapping the same source and target fields

Hi All,
I am working on PI 7.0 and currently I am connecting to PI 7.0 via citrix desktop . Problem here is : in the mapping , direct mapping option that is available to map the same source and target fields is disabled . I do know that this is due to some java version issue .
What I want to know is there any possibilty of solving this issue without installing an updated java version ?
Regards
Vinay P.

I've faced the same for many times and all of that were due to Java version.
1st of all, you have to check the authorizations you have. If you have enough (DEVELOPER_J2EE, CONTENT_ORGANIZER_J2EE, and so), and - obvious but very often forgotten - you have to assure you're trying to change it in the message mapping change mode On.
Then, last shot should be downgrade your Java version.
The 1.4.2 JRE version allow you to use not only the Mapp the Identical field but also Dependencies, Clear Mapping and some other tools/buttons. As mentioned above, if there's a fix in the new Java releases, I do not know (hope so) and would appreciate if you could let us know.
Tks.

LMDB - SLD "Source and target system have the same object server name"

Hi,
the system is a SM7.1 SP1
For some reason (Object-Server-Name changed), the job that syncs the sld and lmdb cancels...
I set the LMDB-Object-Server-Name to its original Name...
Now i've deleted the sync-config in the solman_setup and try to start a new sync, but i get the following error, when i try to configure the source-system:
'Source and target system have the same object server name: CISM318'
But the names are different: 'SM3' (LMDB) and 'CISM318' (SLD)
Any suggestions ?
best regards
Christoph
Edited by: Christoph Bastian on Aug 26, 2011 9:37 AM
Edited by: Christoph Bastian on Aug 26, 2011 11:18 AM

problem solved...
Apparently the sync needs some hours to finish a object-server-name-change...
best regards
Christoph

Source and Target Table in the Same schema........will that work in ODI

Hi ,
Is it possible to have my source and target tables in the Same achema.......will it have any performance issues or some other issues in our ODI.......
I would like to know whether it works well or not .........
( To my understanding it wont have any issues ......But I am not 100 % sure on my judgement)
Thanks
AK

Yes, you're correct.
Just be sure about you load strategy, it means, if you need only to insert use the KM Control Append, but if need update too, try the IKM Oracle Incremental Update... I believe that will work better for millions of lines.
Anyway be sure that your database has the necessary tablespaces to manage huge data volume.

How to find the source and target systems of an imported Transport Request?

Hello,
How to find the source and target systems of an imported Transport Request?
chinna.

Hi Chinna,
In your landscape the TMS must have configured.Let assume that you have four six systems in the land scape.
DEV->DEV1->QUA->PRD and other two systems (TR1 ,TR2)are at different domain amd both are connected to QUA and the requests are forwarded from there.Here normally the flow willl be from DEV to DEV1, then DEV1 to QUA and QUA to PRD.For other two systems (TR1 ,TR2 )the source system will always be QUA.
Regards
Ashok

HOWTO set source and target in WTK KToolbar

I am having trouble getting my MIDlet compiled when pressing the Build button in the WTK's KToolbar. I get the following error:
generics are not supported in -source 1.3
This is because I have JDK 1.6 installed and I'm trying to use a Vector in my code that is typed.
How do I configure the javac settings through the KToolbar so it uses the javac -source and -target arguments?
Thanks.

The thing is like
while practicing in my institute I had used "//ECCserver/SAPMNT" as path for both sender and reciever communication channels...
now i'm unable to write the path for both
please help me out

One problem with constraints missing in source and target database....

DB Gurus,
In my database I am going to export and import data using datapump but dont specify CONTENT clause.
so when I start working on my application, I came to know there are some constraints are missing. now how to check what are the constraints are missing from Source database and how to create those missing constraints on Target database?
Suggest me if you have any idea.

Create a database link between source and target schema.
Use all_/dba_/_user_constraints to generate the difference using MINUS operator.
something like this:
select owner,constraint_name,constraint_type from dba_constraints@source
MINUS
select owner,constraint_name,constraint_type from dba_constraints

Master Data ------ Source and Target Mapping

I want to know the source and target mapping of some master data elements like plant,vendor,customer,workcenter.
Where can I get it. Please provide the relevant documents or links.

Hi,
Check in RSOSFIELDMAP table.
Thanks
Reddy

OWB 10g -- Can't Create Database Links for Data Source and Target

We installed OWB 10g server components on a Unix box running Oracle 10g (R2) database. The Designer Repository is in one instance. The Runtime Repository and the Target are in another instance. The OWB client component was installed on Windows XP. We create a data source module and a target module in OWB. The data source is on another Unix box running Oracle 9i (R2) database. We try to create database links for data source module and target module, respective. But when we created and tested the DB links, the DB links were failed.
For the database link of data source, we got the following error message:
Testing...
Failed.
SQL Exception
Repository Error:SQL Exception..
Class Name: CacheMediator.
Method Name: getDDEntryFromDB.
Repository Error Message: ORA-12170: TNS:Connect timeout occurred
For the database link of target , we got the following error message:
Testing...
Failed.
API2215: Cannot create database link. Please contact Oracle Support with the stack trace and the details on how to reproduce it.
Repository Error:SQL Exception..
Class Name: oracle.wh.ui.integrator.common.RepositoryUtils.
Method Name: createDBLink(String, String, String, String).
Method Name: -1.
Repository Error Message: java.sql.SQLException: ORA-00933: SQL command not properly ended.
However, we could connect to the two databases (data source and target) using the OWBs utility SQL Plus.
Please help us to solve this problem. Thank you.

As I said prior the database link creation should work from within the OWB client (also in 10).
Regarding your issue when deploying, have you registered your target locations in the deployment manager and did you first deployed your target location's connector which points out to your source?
I myself had some problems with database link creations in the past and I can't remember exactly what they were but it had something to do with
- the use of abnormal characters in the database link name
- long domain name used in as names.default_domain in my sqlnet.ora file
What you can do is check the actual script created when deploying the database link so see if there's something strange and check if executing the created script manually works or not.

No mapping for Same structure in source and target

Hi Experts,
I want to transfer the source structure to two receivers . Here source and target structures are same so i dont need mapping.
My question is how many DT,MT and MI required .. mapping required or not.
Thanks in Advance
CS

hi CS,
here in your scenario as u have told that source and reciver are of same structure . definitely you didn't need any mapping . and you have to create two data type(one for sender and one for receiver) , two message types(one for sender and one for receiver)) , and two message interfaces(one for sender and one for receiver).
while creating message types it asks for data type and while creating message interface it asks for message type only . as the structures of sender and receiver are same then inspite of having two receivers we have to create ony one message interface on sender side . later the adapter will take care of further proceedings
but in case of configuration you have to import three business systems . one for sender and two for receiver systems . and you have to configure the communications channels accordingly. as per the receivers accepting the structures you have to use the relevant adaptors .

Entering Source and Target Values in Value Mapping

Hi,
Is there any auomative way of entering source and target values in Value Mapping or FixValues instead of manually entering the values.
I have around 400 values to be entered on both sides.....just thinking of an easy way to do it....
Thanks for suggestions.
Regards,
Bharani

Hi,
Use value mapping replication
chk this link as to what SAP docs say on value mapping replication
http://help.sap.com/saphelp_nw2004s/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/content.htm
Value Mapping replication - Value Mapping replication
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=value%20mapping%20in%20xi&cat=sdn_weblog
ValueMapping using the Graphical Mapping Tool
The specified item was not found.
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=value%20mapping%20in%20xi&cat=sdn_weblog
Regards,
Swathi

Can source and target tables be the same

Hi there,
I need to restate profit center column in the delivery fact table. Historical Profit Centers need to be populated since today is the first time we brought in Profit Center field from LIPS table. The source for the delivery fact table is SAP LIPS table. so what I did is:
joined the LIPS and delivery fact table on (LIPS.delivery number = deliveryfacttable.delivery number & LIPS.delivery line item number = deliveryfacttable.delivery line item number) to get the profit center.
So the source and the target delivery fact table are the same. Is this a good practice becuase Data services warns me that the source and target tables are the same.
Please let me know a better alternative approach to this OR a better approach to restate fields for historical data. Thanks in advance.
Regards,
samqiue

Arun,
actually the LIPS resides on another server and in order to fetch data I have to write an R3 ABAP data flow, so I cant use it directly in a lookup.
Except what Im thinking based on your reply to use a lookup table is: that I will extract 3 colums (delivery number, delivery line item number and profit center) to a table and then use the lookup.
Thanks.
Regards,
samique

Update rules, different source and target units (0BASE_UOM-- 0QVVMRA)

Similar Messages

Maybe you are looking for