Update rules for infocube

hi all,
i am new to SAP BIW. i am trying to extract transaction data. i have assigned my data source to a certain structure in SAP DR3 500 client. this structure is also replicated in the source sysytems of the BW client. however, when i go to create update rules, it asks me for an infosource. then when i give my data source as my entry, it says that 'the name of my data source is not maintained.
can you please suggest how to maintain an infosource in such a case???
regards,
kaustubh

Hi Kabre,
i think u know that the steps to be followed?
please follow this steps:
1) replicate the data source( in ur case, replication is already done)
2) create application component and create infosource under application component and give your infoobjects and activate your communication structure.
select infosource 3.x, if you are using older versions
3) right click on infosource, create transfer rules in that map the objects and activate transfer rules.
if you want to write transfer routine for a particular info object, you write accordingly.
4)go to ur datatarget(ODS or Infocube) rightclick you will find additional functions, create update rules.
there you can create ur update rules and activate
Thanks & Regards
Swathi

Similar Messages

Not Showing Update rule for Infocube IC_C03

Hii
When I transfering infocube IC_C03 with grouping dataflow before and afterwards .The update and transfer rules for infosoures and datasources that are mentioned below are not coming up
Infosources :
2LIS_03_BF
2LIS_03_BX
2LIS_03_UM
Data Sources:
2LIS_03_BF
2LIS_03_BX
2LIS_03_UM
Regards
Viki

Hi
See here -> SAP best practice to Activate BC for 0IC_C03
http://help.sap.com/bp_bw370/BBLibrary/documentation/B82_BB_ConfigGuide_EN_DE.doc
Link: [http://help.sap.com/bp_bw370/BBLibrary/documentation/B82_BB_ConfigGuide_EN_DE.doc]
http://help.sap.com/bp_hightechv1600/HighTech_DE/documentation/BI/B82_BB_ConfigGuide_EN_DE.doc
Regards,
sanjyot

Missing Update Rules for 0IC_C03 in Business Content

We had a problem with 0IC_C03, so we decided to reload from Business Content and then migrate to 7.0 format again.
However, when we try to gather all of the dependent objects for the InfoCube in Business Content, we only get one set of obsolete update rules (2LIS_40_S278), and the update rules for 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM do not show up. They do not appear under update rules, either.
I know they were there at one point because I activated and migrated the cube once already.
Can someone help us find our lost update rules?

Hi Dan,
There are no update rules deliverd with BI 7.0 for 0IC_C03. There are only
transformations Delivered as part of the content. In the new release
Transformation replace the update rules and the transfer rules.
You have the 3 data sources and the associated transformations to
upload data to the infoCube.
Transformations installed
TRCS 2LIS_03_BF_TR -> CUBE 0IC_C03
TRCS 2LIS_03_BX_TR -> CUBE 0IC_C03
TRCS 2LIS_03_UM_TR -> CUBE 0IC_C03
DataSources installed
2LIS_03_BF
2LIS_03_UM
2LIS_03_BX

Error while installing 2LIS_03_BX update rules for 0IC_C03

Dear experts,
when i am trying to install the standard business content
update rule for 0IC_C03 for the datasource 2LIS_03_BX,
it throws me a error stating
"Object UPDR BW9VUFZSUYTTIZS0HT9I4U3RP could not be found"
I need the cause and solution for this error.
With regards,
Meiyappan

Please choose to install the Update Rule between InfoSource 2LIS_03_BX to InfoCube 0IC_C03.
You have probably not selected to install the Update Rule which is throwing an error.
While Installing, after choosing the required Objects, please also change the Display to "List" to be able to view all objects clearly.
Regards
Anujit Ghosh

BW 3.5 update rules for master data

Hi all,
I create a dummy report in that report lifnr is charactics and name its att. after this i create a application component and assign data source and create infopkg data coming in lifnr and name field properly <b>i assign data source using direct master data update</b> after this i create infocube and assign dim.
but when i rgt click on infocube and display dataflow it shows only one level and when i open bex and open that it shows no application data found why this happened after creating infocube it is nessory that i creat update rule for this am i right plz send your openion.
thx

Hi Ankit,
Yoy have to load data to the cube.For that you need update rules.
Steps to load data to the cube
1.Replicate the datasource.
2.Assign Infosource
3.Create transfer rules
4.Maintain the update rules to the cube.
5.Right click on the datasource and schedule an infopackage for it.
Execute the Infopackage and pull the data to the cube.
Hope this helps
Regards
Karthik

Program to activate update rule for master data (info objects)..very urgent

Hi all,
I have an info provider(A0CUSTOMN). For this the update rules are not active.In production system i am not able activate.Please let me know if there is any program to activate the update rule for masterdata(info object).
Thanks=points
Manjula

Hi Manjula,
Leave the id and infocube field blank. Just provide the infosource name.
BTW is this a direct update master data object? In that case all this is not relevant.
Check if it appears as an Infoprovider.
I did not ask enough questions to start with.
BR/
Mathew.

Update rules for 0PU_C02

I am working on the Funds Management and the Standard Business content cube 0PU_C02, which pulls the data from 7 ODSs through the Update rules. The update rules does not have characteristics fields that needs to passed on to the cube, but it has the Key figure fields (0Amount) to pull. However, On looking in the Infocube content, the data are availble for the Characteristics field along with the expected Key Figure value.
How is this situation possible, where we are getting the data (in the infocube) for the characteristics, which does not have any field specified in the Update rules. I checked other update rules too for getting to the bottom of this.
Thanks

Hi Saura,
In the update rules screen, click on an update rule for the key figure (in column Ty.) In the screen that opens up you should be able to see update rules for the chars on the char tab.
Hope this helps...

Error when activating update rules for R/3 training and event management

hi all,
when iam trying to activate update rules for training and event management cube it is giving fallowing error."IC=0PE_C01 IS=0HR_PE_1 error when checking the update rules
Message no. RSAU461".
please guide me how to solve this issue.
thanks & regards
Vamshi D Krishna

Hi Vamsi,
Have you followed the following document to implement HR ?
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0780530-bf03-2b10-d5ad-e9e8a53def23

Error while maintaining the Update Rules for the Infostructure

Hi,
I have added 2 new characteristics for the existing infostructure S9xx and executed the same. While maintaining the Update Rules for the same, system is giving the error message 1. "Field 'PARVW' unknown" and 2. Error generating program RMCX0011.
Please guide me in resolving the issue.
Thanks & Regards,
Kumar.

Hi,
This is with reference to my earlier question that an error is occuring while maintaining the update rules for the existing Infostructure.
Solution provider for this will be rewarded with good points.
Regards,
Kumar.

Add update rule for new key figure in one info struc

Hi, everyone
I would like to know how to add update rule for new key figure in one info struc.
Thanks ahead.
Eric

1)I have created the update rule for one info structure
2)add one key figure in the info structure due to business requirement
3)then I use MC25 to add update rule for the new key figure, but I find that there no relevant menu to do such operation.
Can anybody tell me how to do with it?
Any answer will be appriciated.

Update rule for COSTCENTER master data

Hello All,
Cost Center is not an attribute of 0EMPLOYEE, neither a field provided by the table PERSON.
0COSTCENTER gets data from the MASTER Datasource 0COSTCENTER_ATTR. When writing an update rule for this characteristic, what code should be written?
and Which fields should be considered from the table /BI0/MCOSTCENTER.
Thanks in advance.
Regards,
KP

Hello,
Lets consider a ZINF infoObject with time dependent attribute as ZDEPART.
When writing an update rule, I do a lookup on ZINF. Do I have to write a code for this llokup (mapping this infoObject)?
After writing a code for a lookup on ZINF, will this InfoObject be available for selection in "Master data attribute of"?
Kindly reply.
Regards,
KP

RSAU461, problem with activating update rules for cube 0csrv_c01

Hello,
I have added new fields to data source 0CRM_SRV_PROCESS_H, then changed transfer rules, added characteristics to ODS 0crm_proh, and reactivated update rules 80crm_proh. But now I have problem with second update rules for this cube named 80crm_cnfh. It is not active and all fields in it have red status, error RSAU461, and I cannot activate it.
What I should do? Should I change somehow that second source for data to my cube (change infosource, ods, rule?)
Regards
Radek

hi
As said by the Mti u have just changed the info objects in the ods and u need to map them with the specific info objects from the ods.
double click on the Update rules of the cube and go to the characteristic tab there map the newly added info objects with the IO in the ods.
Khaja

Update rule for cube 0PY_C02

Hi ,
Please let me know the update rule for cube 0PY_C02 as I am not able to locate it in the Business content data flow or meta data repository.
thanks

Hi,
Check the output in the transaction LISTCUBE it will give you better picture of the data coming in the multicube.
Check whether the char in the rows of the report is coming from one of the cube only and the key figure which you are looking is coming from different cube.
Also check for the selections on the report if the selection variable is on a char having identification from only of the cube.
this can cause the filtering of data from one of the cube and you will get all the value as # for that particular field.
Take DESG characterstic into the cube 0PY_C02 also.in the update rule(of cube) for this Infoobject take Master data lookup concept.
Make the Identification mapping for the IO DESG of Multiprovider iwth the chacterstic DESG of both cubes .
Then activate the Master data 0Emlyoee_ATTR.
Reupload the data into 0PY_C02.
Hareesh

Update Rules for 0SD_C03

Hi,
There are 6 KF in 0SD_C03 infocube which comes from update rules with routines e.g. "Subtotal 1 from Pricing Procedure in Statistics Currency". I cannot understand what the routine brings. anyone have an idea?
Thanks,
<b>the routine is:</b>
DATA: VALUE LIKE COMM_STRUCTURE-NET_VALUE.
DATA: US_RATE_TYPE LIKE COMM_STRUCTURE-RATE_TYPE.
CLEAR RESULT.
IF NOT COMM_STRUCTURE-SUBTOTAL_1 IS INITIAL AND
     COMM_STRUCTURE-DOC_CURRCY NE COMM_STRUCTURE-STAT_CURR.
    US_RATE_TYPE = COMM_STRUCTURE-RATE_TYPE.
    IF US_RATE_TYPE EQ SPACE.
      US_RATE_TYPE = 'M'.
    ENDIF.
ENDIF.
IF COMM_STRUCTURE-DOC_CURRCY NE COMM_STRUCTURE-STAT_CURR.
    CALL FUNCTION 'CONVERT_TO_STAT_CURRENCY'
         EXPORTING
              DATE                 = COMM_STRUCTURE-ST_UP_DTE
              DOCUMENT_AMOUNT      = COMM_STRUCTURE-SUBTOTAL_1
              DOCUMENT_CURRENCY    = COMM_STRUCTURE-DOC_CURRCY
              LOCAL_CURRENCY       = COMM_STRUCTURE-LOC_CURRCY
              STAT_CURRENCY        = COMM_STRUCTURE-STAT_CURR
              LOCAL_RATE           = COMM_STRUCTURE-EXCHG_RATE
              STAT_RATE            = COMM_STRUCTURE-EXCHG_STAT
              LOCAL_TYPE_OF_RATE   = US_RATE_TYPE
              STAT_TYPE_OF_RATE    = US_RATE_TYPE
         IMPORTING
              STATISTICAL_AMOUNT   = VALUE
         EXCEPTIONS
              LOCAL_RATE_NOT_FOUND = 1
              STAT_RATE_NOT_FOUND = 2.
    CASE SY-SUBRC.
      WHEN 0.
        RESULT = VALUE.
        RETURNCODE = 0.
      WHEN 1.
        CLEAR MONITOR.
        MONITOR-msgno = '005'.
        MONITOR-msgid = 'SDBW'.
        MONITOR-msgty = c_msgty_e.
        MONITOR-msgv1 = COMM_STRUCTURE-DOC_NUMBER.
        MONITOR-msgv2 = COMM_STRUCTURE-ST_UP_DTE.
        MONITOR-msgv3 = COMM_STRUCTURE-DOC_CURRCY.
        MONITOR-msgv4 = COMM_STRUCTURE-LOC_CURRCY.
        append MONITOR.
        RETURNCODE = 4.
      WHEN 2.
        CLEAR MONITOR.
        MONITOR-msgno = '006'.
        MONITOR-msgid = 'SDBW'.
        MONITOR-msgty = c_msgty_e.
        MONITOR-msgv1 = COMM_STRUCTURE-DOC_NUMBER.
        MONITOR-msgv2 = COMM_STRUCTURE-ST_UP_DTE.
        MONITOR-msgv3 = COMM_STRUCTURE-DOC_CURRCY.
        MONITOR-msgv4 = COMM_STRUCTURE-STAT_CURR.
        append MONITOR.
        RETURNCODE = 4.
    ENDCASE.
ELSE.
    RESULT = COMM_STRUCTURE-SUBTOTAL_1.
ENDIF.
IF COMM_STRUCTURE-DOC_CATEG CA DEB_CRED.
    RESULT = RESULT * ( -1 ).
ENDIF.

Is the question what are the subttoal 1-6 or what does the routine do?
Sub totals 1-6 are user defined fields in the SD pricing block - if the SD consultants haven't already used them for their purposes it is a good idea to use them to denote surcharges etc that you want in BW (without having to use the condition extractors or user exits to get the sales order breakdown)
What does the routine do?
Exchange rate conversion then multiple by -1 if it is a credit note (or similar)

Update Rule for 0PP_C02 -- 2LIS_04_MATNR

We installed the cube, update rule, infosource, Transfer rules from Business Content for InfoCube 0PP_C02. Everything installed well, but when I try to activate the update rule I get the following error: "Field "/BI0/APP_O0100" is unknown It is neither in one of the specified tables nor "DATA" statement "DATA" statement."
I see that /BI0/APP_O0100 is referenced in the Start Routine. I assume that I need to install another object from business content but I not sure what. Does anyone know what my next step should be to get the update rule activated?
Thanks,
Chris

Hi,
The table which you have mentioned referrenced in the update routine is an Active table of 0PP_O01. Check whether 0PP_O01 has been already installed and active. If no you many need to install and active the same. If yes, please give the exact details of the error which you are getting while activating the update rules.
Thanks & regards,
Namrata

Update rules for infocube

Similar Messages

Maybe you are looking for