Update Rules inactive-Log not found in main memory

Hi
I am trying to active update rules but it is failing with log not found in main memory.
I tried update rules syntax check and system says no error when checking the update rules.
What could the reason? How can I dig this further? Please advise ASAP as this is urgent.
Regards
Vennela

Check out if there has been any update error in VA02 using transaction SM13.
Lokesh

Similar Messages

Background Job - Log Not found (in main memory)

Gents,
I am triggering a background through an RFC using JOB_OPEN,JOB_SUBMIT & JOB_CLOSE
the program associated with the Job is put in to execution immly I don't have any problem
but some Jobs are in Cancelled Status coz the program was terminated due to the Error Message
Log not found ( in main memory ) Message Class - BL Message ID - 207 all the cancelled jobs are
having the same message.
It's pretty sure that this message is not issued by my background program.How to get rid of this
is there any SAP Notes.
Best Regards-Sreeni Anbarasan

Check out if there has been any update error in VA02 using transaction SM13.
Lokesh

Error in integration Log not found (in main memory)

Hello Experts,
We are facing an error at the moment when we send a contract from CLM to the ERP, we run the transaction BBP_ES_ANALYZE and the error that we got is Log not found (in main memory).
We already reviewed all master data integration, any other suggestions?
Also, this integration was working fine at the beginning, but Basis team applied an update to our ERP system and after this it generates this error.
thanks in advance
Kind Regards

Hi,
Can you check the settings as per blog Debugging MA publish to ERP?
Unless the activate log is set, BBP_ES_ANALYSE will not be able to provide much information.
Ashwin

Error "massage not found in main memory"

While generating report in Portal, I am getting error message.
'Message Not Found (in main memory) '
Please help me
B/R
Faiz

No We we didnt get any error in RSRT and not even Portal... It is not reproducible...This error reported by Customer...
I asked to reisntall Application like I.E / SAP GUI / BEX etc.. She did that but still have the problem....

Update rules infocube 0py_c02 not found BI 7.0

Hello Forum,
By activating the infocube standard payroll (0PY_C02), I found the problem that the rules for updating the infocube not exist and neither are activated in the BI content version 7.0. I have written a note to Sap, and I say it is not a mistake that the rules in version 7.0 will have to manually create. But of course, I have a doubt. There are features and ratios that are calculated using ABAP and routines are not fed directly from the data source, therefore not as cargo and where can I get the code. Someone has an idea?
Thank you.

My mistake, I hadn't selected my system to view the metadata. I also deleted the original source system client and will re-start the replication and migration with the new client

Error "No message found(in main memory) " while creating new vendors

HI Experts,
I have just join a already going SRM project , i am creating vendors in SRM using su01 and then assigning a BP with the role of employees to that vendor.
But when i logged in to to the portal for the bid submission i am getting one alert message which states that
"message not found(in main memory)".
but if i am using already created vendors(some one else has created it before i joined the project) then it is working fine in the portal.
i have defined relationship also as it was done in those vendors still its not working.
Can any one help me in this.

Hi,
Please go through the follwoing notes:
Note 1037262 BBP_QUOT_BOB: Surrogate Bid receives Message not found error
Note 684024 Error "Message not found (in main memory)"
Thanks,
Pradeep

Log - hostapd trying to update accounting statistics, station not found , ] trying to deauthenticate to station, but not authenticated

I am seeing log entries and want to see is security problem.
Log Message from AP xxx.xxx.xxx.xxx
TIME                Priority Process Id                Message
Sep 18 2014 11:0       3        hostapd[941]            trying to update accounting statistics, station not found
Sep 18 2014 11:0       3        hostapd[941]            trying to deauthenticate to station but not authenticated

Hi mbalbuena
you are not mentioning what kind of authentication (WPA-Enterprise, WPA-PSK,..) are you using for your wifi network. That could be related to RADIUS accounting feature (in case of WPA-Enterprise with RADIUS accounting enabled/checked) but I am not sure.
But nevertheless of that I hope this is just information that:
Some client wanted to authenticate to your network, but it fails. This resulted to explicit deauthentication of that client by your WAP (regardless of fact if client was really authenticated or not at beginning). Forced deauthentication makes sense for example in case, that client was successfully connected to your Wifi, but it fails to reauthenticate (yes, every client is challenged to reauthenticate regularly after defined period of time) for some reason - in this case forced deauthentication ensures that user will get kicked off from your Wifi network. That's my explanation of second Log line.
First line is just triggered action resulted "deauthentication" process - i.e. gather accounting statistics of that client. But in your case it fails, because that client was never really connected to your Wifi network and thus there are no records in statistics table for him.

OBIEE 11g : query log not found

Hi,
I am not able to see the query log in 11g answers manage session throwing error query log not found.
I am using obiee 11g. 11g admin client is installed in local machine and I upload the rpd through enterprise manager. But I can not able to open the rpd in online mode that's why cannot change the query log level=2 (as in obiee 10g) for seeing the query log in Answers. Usually after making changes in 11g rpd, I upload that in server via enterprise manager console.
Can anyone please tell me what should be correct option to see the query log and how I can open the rpd in online mode and how I can set the query log level in obiee 11g????
Please help.
Thanks
Titas

Hi,
Its known bug and it can be done by below methods,
Method1:
If you enabled loglevel for each users wise it may be override with below place also can you confirm both places.
enabled Tools-->Options-->Repository-->
System log level by default will be 0 just try to increase to 2 or 3 and save it.
Method1:
by each report wise enabling loglevel
try putting the below syntax in prefix section of advanced tab.
SET VARIABLE LOGLEVEL=2,DISABLE_CACHE_HIT=1;
It should generate the log with database sql as well.
Method 3:
Create Session variable(LOGLEVEL) with initblock
in your init block --> datasource place put it like below query
select 3 from IW_POSITION
Note:just point any existing physical table from u r RPD.
Then try to save it and test it.
Refer screen
http://bidevata.wordpress.com/2012/03/03/no-log-found-error-in-obiee-11g/
Thanks
Deva
Edited by: Devarasu on Oct 11, 2012 11:44 PM

Archive log not found

Hi,
I want to run the RMAN backup, but I lost some of the archivers. How to take the backup excluding those lost archivers?
Thanks,
GK

Only as note: You are faced to the error RMAN-06059.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 03/05/2006 12:43:42
RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
ORA-19625: errore nell'identificare il file C:\ORACLE\DB\TEST\ARCHIVE\1_36.DBF
ORA-27041: impossibile aprire file
OSD-04002: impossibile aprire il file
O/S-Error: (OS 2) Impossibile trovare il file specificato.

"Old" update rule from ODS not working

Hi Gurus,
I need to set up the "old" fashioned update rule to load data from an ODS1 to another ODS2.
The thing is that I need to set up an update rule because I need to implement a Return Table Routine that is not supported (as far as I know) by the new Transformation/DTP.
When I select option (through the right mouse click over ODS1) "Other Options" - "Create Update Rule" it takes me out of the RSA1 and leaves me in the main menu making it impossible to create a new update rule.
The strange thing is that I have this working from and ODS to an InfoCube.....
Suggestions, a workaround??
Andrea.

Hi Jerry,
Just to confirm that this is not working. The tys_TG_1 structure only shows me the target infoprovider structure. Check that in the how to, to be able to derive employee first you need to assign eache source_filed to the result_field leaving employee blank.
I need to have in the same place, the source_field structure (source infoprovider field structure) and the result_field structure (target infoprovider structure). That is what the "old" return table gives me as in the same place I can have the communication_structure (source infoprovider field structure) with the return_table structure (target infoprovider structure).
Just to understand, in the source infoprovider I have 12 Key Figures (1 for each period) and I have to split each incoming record to 12 records. If I work only with the result_field structure tys_TG_1 and the result_package tyt_TG_1 I'm not able the see those 12 KF.
So... return table functionality is not fully supported by BW 7 as far as I know.
Any other ideas why I'm not able to create the old Update Rules from an ODS?
Regards,
Andrea.

"update rules inactive " error when importing transport request

Hi experts,
I am stuck while importing transport request of update rules. I am moving transport request of update rules from 1 system to another and stuck while importing it in 2nd system. Only two update rules are stuck among all giving an error of "inactive update rules".
I have again tranported it twice after activating theose two update rules.
Please help!!!!!

Hi Heena,
Can you provide more details of the issue like is it a DSO to DSO transformation, error message etc.

Apple Software Update error- "Entry Point not found"

I have had Apple Software Update/ iTunes on my PC for over 4 years. Today, randomly, when I went to update iTunes to the new 10.5 version, Software Update did not prompt me to update. That was odd, but I didn't realize anything was amiss yet at this point.
In iTunes, I went Help > Check for Updates which indicated the new version was downloaded. When promted whether I'd like to update, I hit yes, which even more oddly took me to apple.com to download iTunes all over again. (Normally, updates download from within iTunes and it's an update, not a full hour-long re-download.)
I didn't want to redownload iTunes (what would happen to all of my previously downloaded apps and music, set playlists?) so I opened Software Update, and got the following error message:
SoftwareUpdate.exe - Entry Point Not Found
The procedure entry point ?CreateProductsFromXML@CSUCatalogObject@@QAEXP6AIPAXIIJ@ZOIV?@CStringT@WV?$StrT raitMFC@WV?ChTraitsCRT@W@ATL@@@@@ATL@@@Z could not be located in the dynamic link library SoftwareUpdateFiles.dll
Strange, right?
So my questions.
1.) Does anyone know why Apple Software Update would suddenly get errors? I've used it recently (this past weekend?) and everything was fine.
2.) Is there a way to fix Software Update, since I'll surely need it in the future.
3.) In the meantime, should I proceed with re-downloading the full version of iTunes again, and will it mess up anything I currently have in my iTunes library? Would I need to back it up or do anything to help ensure there are no further problems?
Thanks for your help. To say I'm confused is an understatement!

Well... after I posted this, some info from other posts came up and I found the answer!
In case anyone has the same issue that runs across this... this worked for me perfectly.
Correct Answer by Sposivo on Aug 19, 2011 5:23 PM
"Start, Control Panel, Add & Remove Programs, Apple Software Update, Change, Repair" - this fixed it for me.
See the answer in context

Business Rule Error: Fact not found in the rule engine working memory, rule

I am trying to create a simple decision table with an input(ValidateInput) and a output(ValidateOutput). The input and output schemas have unbounded and nested elements(Parent-child relationship). When I create a condition(specific condition on input) and in the action I am asserting the output object. But when I run using EM it throws the following exception. It would be helpful if somebody could tell me what could be the problem. Please note when I set the output as ValidateInput object then it runs fine. Also it executes fine with ValidateOutput if it doesn't have unbounded(List) element inside it.
Error Message: {http://xmlns.oracle.com/OracleRules10/OracleRules10_DecisionService_1}operationErroredFault
Fault ID rules:211
Fault Time Jun 18, 2011 10:45:13 AM
Non Recoverable Business Fault :
Fact not found in the rule engine working memory, rule session execution failed. The rule session 270013 failed because an instance of the fact com.example.customer.ValidateResponse could not be found in the working memory of the rule session. This is most likely a rule modeling error. The decision service interaction expects the fact instance to exist in the working memory of the rule session. Check the rule actions in rule designer and make sure that a fact of the expected type is being asserted. If the error persists, contact Oracle Support Services. 270013
Edited by: reachsky on 18 Jun, 2011 9:57 AM

It's working now..I had to use Global variable to declare child element of the output variable and use the same during action.

BRARCHIVE fails with BR0017E error message: "off line redo log not found"

After upgrade, archive format was changed to introduce resetlogs id in archive log file name
Archive destination            /oracle/GDD/oraarch/GDDarch
Archive format                 %t_%s_%r.dbf
NOTE: %s log sequence number, %t thread number, %r resetlogs ID that ensures unique names are constructed for the archived log files across multiple incarnations of the database
We did have problems with this upgrade so database was recovered once and started with resetlogs (new incarnation created).
Now when we run brarchive it is trying to archive archive_log_file
BR0017E Offline redo log file '/oracle/GDD/oraarch/GDDarch1_853_544272161.dbf' not found
while on archive_log_dest we have files like "/oracle/GDD/oraarch/GDDarch1_853_618656359.dbf"
Can you please help me to find out from where brarchive is picking parameter for log_archive_format and why it is not picking up current one causing missmatch between archvie_redo_log_file create and one BRARCHIVE is trying to back up.

I already tried it (renamed archGDD.log to andrija.archGDD.log) and rerun
brarchive -c -u / -r initGDD.utl.nbkp.bdhp4320 -cs
it gave me output:
brarchive -c -u / -r initGDD.utl.nbkp.bdhp4320 -cs
BR0002I BRARCHIVE 7.00 (14)
BR0006I Start of offline redo log processing: advfexyn.cps 2007-05-08 08.33.13
BR0477I Oracle pfile /oracle/GDD/102_64/dbs/initGDD.ora created from spfile /oracle/GDD/102_64/dbs/spfileGDD.ora
BR0013W No offline redo log files found for processing
BR0007I End of offline redo log processing: advfexyn.cps 2007-05-08 08.33.15
BR0280I BRARCHIVE time stamp: 2007-05-08 08.33.15
BR0004I BRARCHIVE completed successfully with warnings
and in archGDD.log that is created there is againreference to 0544272161 which seems to be still reference to old resetlog ID:
bdhp4320:ac8558 41> vi archGDD.log
"archGDD.log" 4 lines, 322 characters
GDD util_file advfexyn cps 2007-05-08 08.33.13 2007-05-08 08.33.15 9 ...........         0        0        0
     0 -
7.00 (14) @0544272161
GDD util_file advfexyn cps 2007-05-08 08.33.13 2007-05-08 08.33.15 1 ...........         0        0        0
     0 -
7.00 (14) @0544272161
and in /oracle/GDD/saparch/advfexyn.cps file there is output like:
Name                           Value
oracle_sid                     GDD
oracle_home                    /oracle/GDD/102_64
oracle_profile                 /oracle/GDD/102_64/dbs/initGDD.ora
sapdata_home                   /oracle/GDD
sap_profile                    /oracle/GDD/102_64/dbs/initGDD.sap
backup_dev_type                util_file
util_par_file                  /oracle/GDD/102_64/dbs/initGDD.utl.nbkp.bdhp4320
system_info                    oragdd/oragdd bdhp4320 HP-UX B.11.11 U 9000/800
oracle_info                    GDD 10.2.0.2.0 8192 862 2969171885
sap_info                       640 SAPGDD GDD W1381514715 R3_ORA 0020195637
make_info                      hp_64 OCI_101 May 27 2006
command_line                   brarchive -c -u / -r initGDD.utl.nbkp.bdhp4320 -cs
BR0013W No offline redo log files found for processing
BR0007I End of offline redo log processing: advfexyn.cps 2007-05-08 08.33.15
BR0280I BRARCHIVE time stamp: 2007-05-08 08.33.15
BR0004I BRARCHIVE completed successfully with warnings

Can't update IPhoto because application not found?

I have had the latest iPhoto until yesterday when I did something dumb? then I couldn't open iPhoto anymore. I did create a new library, but discovered that the version of iPhoto I can now open is only a 2. Whenever I try to update to iPhoto 5 or 6, the screen says "you cannot install iPhoto update on this volume. An eligible iPhoto application was not found in the location / Applications/iPhoto.app" when I try to install it onto the hard drive. I'm an amateur at this and would surely appreciate some help. I don't want to be stuck with a version 2! I would also like to be able to import all my pictures back.

Hi lori,
From the beginning: We just bought this intel two months ago. I believe it came equipped with the latest iLife and therefore the latest iPhoto. The technician at the store booted up everything from our old broken iBook, which had older versions of everything (though I don't think the iPhoto was THAT early of a version.)
Recently, I set up a new user and I tried to copy (drag over) my old photo library from my iBook backup file, because this new user didn't have any pix on its iPhoto. When I tried to do that, I believe the computer asked me some questions, like I'm agreeing to certain terms of iPhoto. I thought this was required process under a new user. I really didn't pay attention to it and just clicked 'agree'. Then I couldn't open iPhoto anymore because it said I had done some changes to iPhoto and needed to reopen with a later version. I read some of your other posts and tried to create a new library, which I succeeded in doing. But now it's version 2. Really strange and frustrating.
I'm assuming that the latest iLife is on my computer already? We don't think our computer came with the CD/DVDs.
I SURE appreciate your help thus far! It's all new to me.

Update Rules inactive-Log not found in main memory

Similar Messages

Maybe you are looking for