Update rules not active

Actually i installed the 0CDS_C01 AND ,0CDS_C02( Sales Scheduling agreement Processing).when i'm activating the update rules its giving error message like
"IC=0CDS_C02 IS=80CDS_DS07 error when checking the update rules".
whts reason for this? its urgent...
Thanks

the update rules get activated only when all the depenedent bject on
update rules get activated.
so go to object type and select the update rule with before collection and then
activate the same
pls assign points if helpful.

Similar Messages

For 0PS_C02 cube Project System - Dates update rules not activated!!

Hi All,
When we are trying to install update rules from the BI content for PS module for the cube "0PS_C02 Project System - Dates", the
update rules are not activating. under the cube when BI content activation. What is the issue in activating the update rules from BI content. From BI content the available version objects only will be activated i think. Please rectify and resolve the same at the earliest friends.
thanks,
Sakali

Hi,
Try to activate through program RSAU_UPDR_REACTIVATE_ALL.

Update rule not activating for Standard BI Content

Dear Reader,
I am unable to activate the BI Content update rule for sales cube. All the key figures listed in the update rule are RED.
How can i fix this?
Please advise.

HI,
This usually happens if if you have added new fields in the cube and if that field is not properly mapped , ie
no mapping being done but it looks like some routine there for that field but we would have not written the routine
just simply routine symbol appears in that case
if you dont have mapping assign it as initial in update rule or map them properly which will resolve your issue.
Thanks,
Arun.

Bi content update rule not in prod

Dear Experts,
I'm checking our BI production system today as part of our GO-LIVE activities and I realized that some objects are missing.
Namely the update rules for some attributes and texts of Master Data such as 0customer_ATTR,0customer_TEXT, 0Vendor_ATTR, 0Vendor_TEXT...
I don't know what went wrong as those objects are activated in our QA system.
I have only a few hours to check production then I am not supposed to access it.
Do you have suggestions on how to proceed?
Regards,
Alice

Hi,
Before coming to issue, check if the infoobjects are modeledby direct update. If it is direct update then there wont be any update rules.
You can check weather they are transported to the target system or not. Goto transport connection-->check the objects weather collected in a package or not. If the transport is released there wont be any request number against it.
The better option is to collect the missing objects in a new TR and transport it. There is no big deal doing it as it is only update rules.
Regards
R Karthik K

Update rule not reading MD correctly

I have an ODS that has update rules. One of the field (Substatus) has to read Appraisal Document Master data as per the update rule. The Appraisal Document master data has the Substatus valu of 3 which is correct. Unfortunately, the ODS shows the value as 0.
How could this happen?
Points will be assigned.
-Sonny

Hi,
which update u are loading delta or full
if u r loading delta update it only brings the changed records.
r u loading for the first time. if not it brings 0 because the data may not be changed in master data.
if u r loading for the first time then it brings the value 3.
check data in active data table and ur master data it will be ok.
thanks,
pavan.

RS_EXCEPTION230 object Update rule not found

hi guys
while extracting the standard business content for 0gl_account i am facing the problem RS_EXCEPTION230 update rule object not found .The update rule appears as a white.
please help as this preventing me to move forward
thanks
nitin

Exactly, i had the same problem and have solved it as follow:
First you have to select the update rules (for example) and transfer them (you have to select the option 'Transfer', of the 'Transfer command), you will see that they will be activated without error, next step you can simulate them or include them into an order to transport to another environment.
Hope this help.

Update rule not working with high data load.

Hi all,
i have a problem with a update rule: it's an update loop in a dso, in the start routine i do 3 select for all entries in data-package on the active table of another structure; then i read those table to update some values in my update rule.
I did some test and it seemed to work well (i tryed for example just for a plant) but when i launched it for all the records in the dso the result was differente and, for the same plant, the values where not updated correctly (they were blank).
Now the routine is really the same so it sound strange to me that launching the infopackage without filters i can't get the same correct result of my previous test but i was wondering what could be the reason of this error...
Anyone can help?
The start routine is this:
REFRESH i_tab.
SELECT field1 field2 field3
    INTO TABLE i_tab
    FROM target_dso
    FOR ALL ENTRIES IN DATA_PACKAGE
    WHERE deliv_numb = DATA_PACKAGE-deliv_numb
      AND deliv_item = DATA_PACKAGE-deliv_item
      AND act_gi_dte <> l_blank_date.
then i read this table in the other routines...

It is hard to say. What does the update rule look like?
after the read statement, you could check the return code. If it is not zero, go into an infinite loop, and debug it via SM37.
read table....
IF sy-subrc <> 0.
WHILE 1 = 1.
    "debug in SM37.
ENDWHILE.
ENDIF.

Update rules not getting installed from business content.

Hello,
One more major issue I am seeing is that my update rules for some cubes (0PUR_C01)are not getting installed at all from business content and the errors i am getting are like datasource 0vendor_text not maintained and then there is long list of such red lights. when actually I can see most of the datasources active in the datasource tab on BW side.
So i dont know how to get these update rules working.
Please advice,
Thanks

Hi Mukund,
please see also the answer that I provided to your thread
<a href="https://forums.sdn.sap.com/thread.jspa?threadID=121274&tstart=0">Strategy toward new and 3.x datasource / infosource</a>
In addtion, you might want to check
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/84/497e4ec079584ca36b8edba0ea9495/content.htm">help.sap.com DataWarehouse</a>
and the online documentation for more general information about data modeling / acquisition.
Cheers
SAP NetWeaver 2004s Ramp-Up BI Back Office Team

Reg: 0PUR_C01 - Update Rule - Not Getting Installed

Dear friends
I am trying to activate MM Cube (0PUR_C01)
But when collecting dependent objects for 0PUR_C01 with data flow before option, Once collection over, system throws the following message
1.             Object 0DB87SIC1 (InfoObject,IOBJ) could not be collected for object 0PUR_C01 (InfoCube,CUBE)
2.     Object 0DBGUDUNS (InfoObject,IOBJ) could not be collected for object 0PUR_C01 (InfoCube,CUBE)
3.     Object '0DB87SIC1' (IOBJ) of type 'InfoObject' is not available in version 'D'
4.     Object '0DBGUDUNS' (IOBJ) of type 'InfoObject' is not available in version 'D'
And also, I could able to see the following long text error message.
1.     You have collected objects in the BI Metadata Repository. Associated objects for object 0PUR_C01 of type InfoCube, CUBE have also been collected. Object 0DB87SIC1 of type InfoObject,IOBJ was among these objects
2.     However, this object 0DB87SIC1 of type InfoObject,IOBJ is not available in the metadata repository
3.     If this error occurs while you are installing BI Content, an error may have occurred during the delivery. Inform SAP. In all other cases, check that the object has not been deleted by another user during collection.
I tried to install those collected objects, the cube alone gets installed and visible in workbench. Update Rules are not getting installed. Even after,I have collected the update rule separately and tried to install lot of times, no luck for me
eventhough the job has been successful
If anybody came across this type errors, Please guide me to solve that
Points will be awarded for the right answers.
Regards
Raju Saravanan

hi raju
1. Object 0DB87SIC1 (InfoObject,IOBJ) could not be collected for object 0PUR_C01 (InfoCube,CUBE)
2. Object 0DBGUDUNS (InfoObject,IOBJ) could not be collected for object 0PUR_C01 (InfoCube,CUBE)
3. Object '0DB87SIC1' (IOBJ) of type 'InfoObject' is not available in version 'D'
4. Object '0DBGUDUNS' (IOBJ) of type 'InfoObject' is not available in version 'D'
u just ignore this errors and install. this wont affect.
u just try again colllecting the cube and collect it "befroe and after"
u wld get the update rules for the following datasources
2LIS_02_ITM
2LIS_02_S012
2LIS_02_SCL
Regards
Dina

Error in update rule during activation

Hi All,
I am updating data from a DSO to infocube which are all migrated versions from BW 3.5.to BI-7.0 The update rule to the infocube is fine and without errors when i check it. However on activation , a short dump is being generated. The message class of the eror is RSAA and message number is 108X,which says it is an internal error. Please can any of you advice a solution.
Many thanks in advance.

Ram,
Check your char and time char properly mapppled for all filed with refereing key figures.
Thnaks
Thota

Direct mapping in updates rules not functioning as expected

Hi experts,
I have a character string with only digits (NUMC) which is mapped in udpate rules of a ODS. Its a direct mapping from another ODS. Inspite of that, we are having scenarios where the source ODS is filled and the character in the destination ODS is coming as empty. The source ODS is looking up that value from another ODS.
I am wondering why is it so. I am in 3.5 enviornment.

Is it just this field coming up as blank or other fields too,
Do you any start routine or any kind of filtering in place in the update rules.
Just try to simulate a update and see if you can find anything.
/people/pavan.bayyapu/blog/2006/09/06/debugging-data-upload-in-bw
Also make sure you "No Update" is not selected in update rules for this field.
Edited by: sam hennry on Mar 28, 2008 1:15 PM
Edited by: sam hennry on Mar 28, 2008 1:17 PM

Transfer rules not activated

Hi Guys,
This is Venkat, unable to activate Transfer rules.It doesnot Showing any errors while activating the Transfer rules and also in the DISPLAY LOGS.But while trying to transfer the field(0crm_guid)from assignInfoobjct-field by using propose transfer rules spindle to Communication str/Transfer rules it was not allow this field to transfer into the transfer rules.After activating it was showing the message Transferstuctute was activated.
could u Pl help me .

Hello Venkat,
you made a detailed description. I just don't know, which transfer rules you mean. Which transaction code you are using?
Regards,
Christian

Transfer Rules not Activating when transported to QAS.

Folks:
We are on BW 3.5.
I have transported and activated the datasource in BW QAS.
But the Transfer rules are not activated in QAS.
I have transported the info-pakge successfully.
When I try to activate the transfer rules manually in QAS I get the following error message:
You do not have permission to create table /BIC/B0000116000
Message no. DT097
Is there a authorization issue here that is affecting the replication of the datasource?
Thanks
Denny

Folks:
I forgot to mention that the datasource is 0DIVISION_TEXT.
We are on BW 3.5.
I have transported and activated the datasource in BW QAS.
But the Transfer rules are not activated in QAS.
I have transported the info-pakge successfully.
When I try to activate the transfer rules manually in QAS I get the following error message:
You do not have permission to create table /BIC/B0000116000
Message no. DT097
Is there a authorization issue here that is affecting the replication of the datasource?
Thanks
Denny

BI Content Update rules not available for 0IC_C03 cube

Hi
We have recently did technical upgrade to our DEV box and made a system copy for sand box. I am trying to install the BI content for 0IC_C03 infocube. I cant see update rules for this data flow. I could see Transformations and can also see info source (ex: 2LIS_03_BF_TR) which we dont expect. We havent migrated or never used inventory BI content. What is the reason we could see transformations for this cube data flow in BI content? We are on SP15. I tried to install transformations but cant install them properly.

Hi A,
Business content it's still using 3.x data flow. That's why you see a 3.x infosource.
You won't have transformations for this. The update rules icon is like a transformation but with a small white square on the left.
So the dataflow you should have is:
Cube
Update Rules (0IC_C03 2LIS_03_BF)
    3.x InfoSource (Material movements (as of 2.0B))
      Transfer Rules
        Datasource
You'll see a small square next to all the objects, except for the cube. This means 3.x object.
Hope this helps.
Regards,
Diego

Update rule not working

Hi,
I have ods1, ods2. I am updating from ods1 to ods2. in ods2, i have KF 0conf_scrap. I have data like this 0.000,1.000.....I am writing the code in ods2 update rules on 0conf_scrap like this.
IF COMM_STRUCTURE-CONF_SCRAP <> 0.
RESULT = COMM_STRUCTURE-CONF_SCRAP.
ENDIF.
But I am still getting the 0 values. is anything wrong with the code? or is there any formula?
Thanks,
Sue

DATA: w_scrap type I.
clear w_scrap.
w_scrap = CEIL(COMM_STRUCTURE-CONF_SCRAP).
or
w_scrap = FLOOR(COMM_STRUCTURE-CONF_SCRAP).
IF w_scrap <> 0.
RESULT = w_scrap.
ENDIF.

Update rules not active

Similar Messages

Maybe you are looking for