Update sales orders for MPS

Hi Gurus,
We have the following problem. The project I am working in has 2 phases. In the first phase SD module was implemented. Now in the second phase we have implemented MPS in PP.
The point is that for all the new sales orders that are created in the system a  customer independent requirement is generated by the MPS but we do not know how to update all the old open sales orders to generate a requirement.
Is there any standard program or way to do so?
Thanks and regards,
Miguel

Hi Shivan,
Thanks for your reply. I have tested the program SDRQCR21 and works fine for all the orders I have created since I have activated the MPS becuase as far as I have seen the program checks the entries in table VBBE. The problem is that all the sales orders I create before the MPS was running has no entries in that table so it does not work for them.
Do you know if there is a way to get them in?
Kind regards,
Miguel

Similar Messages

  • User exit to update the incompletion log in sales order for pricing error

    Hi experts,
    I have to check the some mandotory pricing conditions in sales order, if that conditions are not exist in sales order then i need to show the information message as well as i need to update it in incompletion log of sales order. (incopletion log we can see on menu bar 'EDIT' or ctrl+F8 on main screen of VA01). So that user can save the sales order but it will be in incomplete status.
    I have completed it upto showing the information message using user exit 'MV45AFZZ', but after this i don't know how to update it in incompletion log of sales order for pricing. I tried to update in tables VBUK-UVPRS, but i am not getting the desired result.
    Please anyone can tell me how to update it. In which user exit i can update the incompletion log.
    Thanks and Regards,
    Vicky.

    Hi Vinod,
    I am sending you my code please check it,
       if TKOMK-SPART = 10.
        if XKOMV is not INITIAL.
          clear v_JEXP.
        READ TABLE XKOMV with key kschl = 'JEXP'.
        if sy-subrc = 0.
          check XKOMV-kwert = 0.
          message i003(ZT) with 'Value should not be 0 for conditioin type JEXP'.
          v_JEXP = 'X'.
        else.
          message i003(ZT) with 'Maintain the mandatory Conditioin type JEXP'.
          v_JEXP = 'X'.
        endif.
        if v_JEXP = 'X'.
      XVBUV-MANDT = sy-mandt.
      XVBUV-POSNR = '000010'.
      XVBUV-TBNAM = 'VBAP'.
      XVBUV-FDNAM = 'PRSOK'.
      XVBUV-FEHGR = 20.
      XVBUV-STATG = '06'.
      XVBUV-FCODE = 'PKON'.
      XVBUV-SORTF = 9999.
      XVBUV-LFDNR = 0000.
      XVBUV-UPDKZ = 'I'.
      append XVBUV.
        endif.
    endif.
    endif.
    Please suggest something to solve this.
    Thanks and Regards,
    Vicky.

  • Extension of input fileds in Sales order for account assignment

    Dear Gurus,
    Can anyone tell me how to extend input fields like Statistical order(COBL-AUFNR)  and cost center(COBL-KOSTL) in sales order for accounting assignment and these fields have to be ready for manual entries. The order types are ZHGA and ZHV.
    Which program has to be modified and how it can be modified?
    Thanks a lot for help and advice.
    Cheers,
    Ricky
    Edited by: Ricky.Martin on Apr 23, 2010 10:45 AM

    Dear Rajendra,
    There is a manual change for tax classification for material master in va02 initially it was blank now it is changed to ' 0 ' is any way influencing....?
    Definitely material Tax classification will influence to determine the Tax code.
    -->So Make sure that customer and material master having proper tax classification indicator.
    -->Have you Update the price after changing the tax classification in the sales order.by going to item dat -->condition tab then click on Update push button bottom of the conditions screen.
    -->Once again the check the condition record maintanence also for your MWST access sequence.
    I hope this will help you,
    Regards,
    Murali.

  • Update Sale Order Header Text through Enhancement

    Hi Experts,
             I Have a requirement to update the sale order Header Text , when the sale order is opened in VA02 and saved.
    Here in I tried using edit_text, it updates sale order header text  directly in DB during run time even before the save action is completed.
    But I need to just fill the header text and that has to be saved during the save action only.
    I tried coding the same in the user exit (userexit_save_document) but this user exit gets triggered only when there is some changes made to the document when opened in VA02 & Saved.
    Is there any  user exist to pass sale Order Header text and save when save button is clicked irrespective of the document been changed or not.
    Thanks in advance
    Sathish

    Hi Brad Bohn,
        My actual requirement is to trigger an Idoc when the user goes to VA02 transaction and clicks save.
    IDoc gets triggered only when there is some changes to that document, that is through NAST table entry based on the output configurations in NACE transaction.
    Now that the user wants to trigger an IDoc even if there is no change (ie. to reprocess the IDoc) when he just opens a sale order in VA02 and click save.
    It is not possible to trigger an IDoc through configurations when there is no actual change in VA02 and saved.
    So it has to be forcefully sent by making some additions to the Order through coding, so I choose that Text box to fill some additional data and save .
    Kindly Let me Know any thing could be done for this scenario.
    Thanks in advance
    Sathish

  • How to update sales orders using B1WS in SAP 8.8 PL18

    Hello all.
    We are having a problem updating sales orders using Sap Business One Web Service ( B1WS ).
    We are running SBO 8.8 PL18, MS-SQL 2008, and all is fine when using the SBO client.
    But when it comes to updating sales orders through B1WS we just cannot get it to work.
    We can add new orders easily without problems. Updating orders always gives this error:
    \[ORDR.PayDuMonth\]\[line: 0\] , 'Field cannot be updated (ODBC -1029)'
    We have checked and verified multiple times that our setup is correct.
    Also the WDSL files are verified.
    We can update orders just fine using the sboclient.
    And using B1WS we can basically do everything, besides updating.
    We have also tried this on different company db's, so we are quite sure this is not
    something related to some general setting we missed, but who knows?
    We have tried different ways to "assemble" the order before updating, but it always
    ends with the above error.
    Here is an example of one of the tests, where we load an order by docentry,
    increment the quantity of all open lines by '1', and then try to update it.
            protected void Page_Load(object sender, EventArgs e)
                // First we login
                string sessionId = "";
                LoginService.LoginService l_login = new LoginService.LoginService();
                LoginService.LoginDatabaseType l_dbtype = LoginService.LoginDatabaseType.dst_MSSQL2008;
                LoginService.LoginLanguage _lang = LoginService.LoginLanguage.ln_English;
                string _server = "SAP-8_8PL18";
                string _licserver = "SAP-8_8PL18:30000";
                string _db = "my_test_company";
                string _user = "manager";
                string _pass = "********";
                try
                    sessionId = l_login.Login(_server, _db, l_dbtype, true, _user, _pass,
                               _lang, true, _licserver);
                catch (Exception ex)
                    Response.Clear();
                    Response.Write(ex.Message);
                    Response.End();
                if (sessionId == "")
                    Response.Clear();
                    Response.Write("No sessionId");
                    Response.End();
                // We are logged in and have a sessionId
                // Now load a valid open order by docentry
                try
                    OrdersServiceRef.OrdersService orderService = new OrdersServiceRef.OrdersService();
                    orderService.MsgHeaderValue = new OrdersServiceRef.MsgHeader();
                    orderService.MsgHeaderValue.SessionID = sessionId;
                    orderService.MsgHeaderValue.ServiceName = OrdersServiceRef.MsgHeaderServiceName.OrdersService;
                    orderService.MsgHeaderValue.ServiceNameSpecified = true;
                    OrdersServiceRef.DocumentParams docParams = new OrdersServiceRef.DocumentParams();
                    docParams.DocEntry = 31; // Docentry of a known open order
                    docParams.DocEntrySpecified = true;
                    OrdersServiceRef.Document order = orderService.GetByParams(docParams);
                    OrdersServiceRef.DocumentDocumentLine line = null;
                    for (int i = 0; i < order.DocumentLines.Length; i++)
                        line = order.DocumentLines<i>;
                        if (line.LineStatus == OrdersServiceRef.DocumentDocumentLineLineStatus.bost_Open)
                            line.Quantity += 1;
                    orderService.Update(order);
                catch (System.Web.Services.Protocols.SoapException ex)
                    Response.Clear();
                    Response.Write(ex.Message);
                    Response.End();
                catch (Exception ex)
                    Response.Clear();
                    Response.Write(ex.Message);
                    Response.End();
                Response.Clear();
                Response.Write("All OK");
                Response.End();
    I hope that someone has an idea as to why this happens.
    The customer often changes quantity or adds lines on their orders,
    and the only way to solve it so far has been to make a new order and
    close the old one.
    Thanks in advance
    J. Thomsen

    Hi,
    Welcome you post on the forum.
    Have you checked if you only update a specific line instead of a loop?
    Thanks,
    Gordon

  • In sales order for the condition type MWST, **Tax code** is displaying wron

    Hi
    In sales order for the condition type MWST, *Tax code* is displaying wrongly at header level i.e. FF instead of AO (under account determination tab)
    AO tax is 0% but for FF it is 19%
    I have checked with the Access sequence it is picking access 08 correctly according to this it should show AO in tax code field for MWST but it is not so..
    There is a manual change for tax classification for material master in va02 initially it was blank now it is changed to ' 0 ' is any way influencing....?
    Even if I consider material tax classification and customer tax code  should not be FF because  tax code  FF is not maintained for the combination of access sequences for condition type MWST
    Please help me.
    Rajendra Prasad

    Dear Rajendra,
    There is a manual change for tax classification for material master in va02 initially it was blank now it is changed to ' 0 ' is any way influencing....?
    Definitely material Tax classification will influence to determine the Tax code.
    -->So Make sure that customer and material master having proper tax classification indicator.
    -->Have you Update the price after changing the tax classification in the sales order.by going to item dat -->condition tab then click on Update push button bottom of the conditions screen.
    -->Once again the check the condition record maintanence also for your MWST access sequence.
    I hope this will help you,
    Regards,
    Murali.

  • Update sales order qty through BAPI_SALESORDER_CREATEFROMDAT2

    HI
    Can anybody help me out.  I have the requirement for creating sales order through BAPI_SALESORDER_CREATEFROMDAT2. The sales order is created but with 0 quantity.
    I am using fields RNDDLV_QTY and TARGET_QTY and REQ_QTY in schedule lines & also setting the update indicator to 'X'  in the corresponding itemx structures.
    In fact it used to work earlier and has stopped now. I am also checking if there could be any change in configuration but don't think this should be the reason.
    Can someone guide me as to which quantity fields of the BAPI are the right ones to update sales order qty?
    thanks

    Hi,
    You are using the correct fields i.e. TARGET_QTY and REQ_QTY. Just check if you are passing the same Item Number in both the tables.
    Hope it helps...
    Lokesh

  • Updating Sales Order Status in Batch

    Hi
    Please let me know if we can update Sales Order Line details like Ship To Address , Date , Status in a batch?
    We are using 11.5.10
    Thanks

    Use the Order management API or the OM interface tables.
    See irep.oracle.com for details.

  • Purchase Order missing for some of the Sales Order for few customers

    Hi All,
    There are few sales orders for which corresponding PO is missing.
    But most of other Sales orders for the same set of customers, PO is coming.
    Could you please enlighten me how this PO is assigned to the Sales order or it is updated with the Inbound Idoc ..
    In any case what may be the reason for PO missing for these sales order...How I can explore this...?
    Thanks,
    Sanjeet

    Hi sanjeet,
       If your IDOC is ORDERS05, Check if you are getting the PO Number in : E1EDK01-BELNR
    Regards,
    Ravi

  • Updating Sales Order no in Production Order

    we have csenario for Sales Order :  Inquery - Quotation - Sales Order .
    In PP we have MTO scenarion . when i run MRP and convert the plan order to Production Order , in place of Sales Order it was updatin Quotation in Production Order .
    we have checked SD config for sales doc Item category =TAC and in Material Master we will used Item Category = NORM
    Please suggest is there any other setting for updating Sales Order no in Production Order .
    Thnx.

    Hi,
    I assume that you are using the strategy 20 (MTO). Go to OVZG here select the class 040 Indiv.cust.w/o cons., keep BLANK for account assignment consumption and rerun the whole cycle and check.
    Thanks
    Hrishi

  • Error message when updating Sales Orders

    Hi Experts
    Following an issue over the weekend when I was forced to perform a  hard reset we are now experiencing error message when trying to update some sales orders. 
    This entry already exists in the following tables " ADO1 (ODBC - 2035) [Message 131 - 183]
    it is not happening on all orders - i think only ones which were on the system prior to the reset.
    We also use webtools and the B1SyncService seems to be causing the SAP B1 system to become unusable - following each attempt to sync there is an error in the event log:
    Event Type:     Error
    Event Source:     B1SynchService
    Event Category:     None
    Event ID:     0
    Date:          29/06/2009
    Time:          13:42:38
    User:          N/A
    Computer:     SQL01
    Description:
    A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)
       at netpoint.api.data.DataFunctions.ExecuteScalar(String SQL, String connectionstring)
       at NetPoint.SynchSBO.SBOObjects.SBOUtility.SetCompany(Company TheCompany, SecurityTicket securityTicket)
       at NetPoint.SynchSBO.Synch.SetCompany()
       at NetPoint.SynchSBO.Synch..ctor(SecurityTicket ticket)
       at NetPoint.SynchSBO.Synch..ctor(SecurityTicket ticket, Int32 pricinginterval)
       at NetPoint.SynchService.NPSynchService.Synch(String profile, Mutex mutex)
       at NetPoint.SynchService.NPSynchService.Main(String[] args)
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    For now I have had to stop the SyncService to prevent B1 from becoming unusable (users are unable to start any AR module), but even after I have stopped the syncservice I still have the error when updating sales orders.
    Regards
    Jon

    Dear Johnny,
    the error reported sounds like a DB Corruption. I would advise you to log a message to SAP Support including all the details in order to obtain the error message. It is also a good idea and it will speed up the process if you include some print screens showing exactly the error message.
    Hope my reply helps you to solve the issue.
    Regards,
    Wesley Honorato

  • Problem updating sales order partner addresses

    Hi all,
    iam trying to update addresses on sales order if there is any update on on the delivery.
    I update the VBPA-ADRNR and create the same ADRC-ADRNR.
    but when iam updating VBAP-VBELN for order using BAPI_SALESORDER_CHANGE there is a new ADRNR being created in VBPA as opposed to using the ADRNR i pass to the BAPI which is the delivery ADRNR.
    Can someone help me resove this...
    and one more small question..
    what do i pass to the paramter addr_handle in the fm ADDR_NUMBER_GET..

    i need to insert/update a record in adrc as soon as an address is updated in VBPA-VBELN of delivery.
    for this want to use ADDR_NUMBER_GET , ADDR_UPDATE/ADDR_INSERT.
    and after this process i am updating sales orders.
    but iam filling the tables u mentioned...the problem is teh new adrnr the bapi is generating instead of the one iam passing it in ADDRNUMBER(new ADRNR) in PARTNERCHANGES table and also iam passing ADDRLINK(old adrnr) field in PARTNERADDRESSES table.

  • How to update Sales Order status using  BAPI_SALESORDER_CHANGE

    Hi,
    I want to update Sales Order status using BAPI_SALESORDER_CHANGE, this BAPI is called from middle ware, but there is no parameter to pass the status value to this function, please help me how to update sales order status using BAPI only.
    Thanks
    RK

    Hi,
    Can u give me details of what status u would like to update in sales order.
    If we are able to update the status from VA02, Then BAPI will assist for the same.
    Regards.

  • Updating sales order pricing after partial delivery

    I have a requirement where due to an enhancement being implemented I need to be able to update the item pricing on the sales order after the item has been partially-delivered. Currently the standard system
    controls do not allow access to the Update Pricing button in the item conditions tab after a partial delivery for the item. Is there any way around this using the standard functionality?
    Regards
    BK GAIKWAD

    Dear,
           For update in sales pricing after delivery you require to reverse and delete delivery.
          Without delivery deletion it is not possible to update sales order's price.
          One more option is you can update your price in billing if you can not accounting of invoice.
    Regards,
    Sandip

  • How to update Sales Order Delivery Block while saving Delivery ?

    Hi,
    I have a requirement wherein i need to update sales order delivery block field(VBAK-LIFSK) while saving the delivery for the order.
    Also I need to remove this block while execution of  Backorder Rescheduling program SDV03V02 (Tcode : V_V2),
    Can anybody help me out in this?
    regards,
    Nitin

    HI,
    try using BAPI_SALESORDER_CHANGE
    pass ur vbeln in SALESDOCUMENT
    pass an 'X' to    BAPISDH1-DLV_BLOCK
    and 'X' to        BAPISDH1X-DLV_BLOCK
    Also add the UPDATE task clause, you will want to set the flag only when delivery is being saved, not before that.

Maybe you are looking for