Update service

NI Update Service error communicating with National Instruments.
Service has worked in the past so I'm not sure if some sort of enterprise restrictions have been pushed out or not. I've installed the latest version of NI Update Service, I have an internet connections, and firewalls have been disabled.
The following error shows up in the log if I run the update service from the command line (niupdateservice -log logfile.txt):
[2015-03-25 09:34:48.070]
[2015-03-25 09:34:48.070] ***ERROR: WebPipeline:: PingPipeline: Could not connect to Pipeline: 0x80002001
[2015-03-25 09:34:48.070]
Solved!
Go to Solution.

Hi John,
Have you tried doing the same in another computer in the same network under the same circumstances? This is to determine if it is a network related issue or not. You could also try doing so in a computer outside of the network.
A. Acuna

Similar Messages

  • Adobe Flash Player Update Service 11.3 r300 has encountered a problem and needs to close.  We are

    I get following message:
      Adobe® Flash® Player Update Service 11.3 r300 has encountered a problem and needs to close. We are sorry for the inconvenience.
    How can I solve this?

    People,
    Listen. This service is, has been and seemingly will be: FREE. So while emotions are running on the hot side of the guage, let's remember; it is FREE. Adobe owes no one anything. Now who's to blame, really? We, the people are to blame. Why? Because everyone has been ok with the fact that one company essentially designed and released a technology for streaming from the net. One company. And almost all of us are using this one company's technology to stream; for FREE.
    But now we are not ok with it when, after we are prompted to update, we have the issue of it not working? We all never saw the ridiculously high potential for this one company to screw things up, intentionally or otherwise? What the ramifications, that we are now experiencing, might be? Nah, we just took it for granted that we would continue to be served. Well the serve came, everyone. Mistake or otherwise.
    It's like this country [US], up until four-years ago. Everyone was either running around with snow shovels and hefty garbage bags to gather all the money they were making or sailing the seas of expectation and an, 'I am out there to get mine' attitude, and then the sh*t hits the fan and now people are complaining? About the very system until four years ago was spoon feeding them poolside with mai-tai's? While it was crushing everyone else in the known world?
    No doubt it seems incredulous that a multi-billion dollar company has an IT department that would include in an update, for their own software, that would be inconducive to working. No doubt. But keep in mind: we are all either using browsers by Apple or MS. Anything happens to these browsers, including a virus or anything else that threatens our use of them and...?
    So climb off the haughty, 'I deserve' crap and walk on the solid ground of trying to resolve this issue here at Adobe and around the net. If we were to band together, as the 99%, we could solve this, no problem. But then that holds true with resolving this fictitious economic downturn nonsense, that we solidly take for truth at face value, because our mainstream media says so. But no other species on this rock flying through space would know what the f*ck we were talking about.

  • Remote update service on sony ericsson G502 does not work

    I have a Sony Ericsson G502.  The phone has a problem  which causes it to restart when I am on a call.  Sometimes it just restarts on its own.  I searched on the net and found that other people have also seen the same issue and I believe a software upgrade will fix the problem.
    I dont have the usb cable of the phone so I cannot do the upgrade using the 'Update Service' software from the pc.  I tried doing a 'remote update service' from the phone in Menu-->Update Service-->Search for Update, but it just says that your phone is running the latest software.  The current software version on my phone is 1203-8254 R1FA031 080512.  Is this the latest software available?  I have bought the phone 2 years back (but used it sparingly), and I am not convinced that there is no update to this software.
    Please suggest a way I can upgrade this phone?  I like the phone, but this restart problem makes the phone very unreliable for everyday use.   Kindly help.

    Your best bet is to get a USB cable and update the software with SEUS on your PC.If, as the remote update service tells you, you already have the latest software, you can only re-install the software via PC anyway.Alternatively, you can perform a master reset on the phone and see if that fixes the problem.Hope this helps.

  • Software Update Service house cleaning

    What controls house cleaning for the Software Update Service? If I ask it to stop mirroring updates that have long since been applied, the files still hide in /usr/share/swupd/.
    Deselecting the mirroring of an update doesn't help.
    The normal house keeping tasks don't seem to clear it out.
    I could just navigate to the directory and delete by hand, but that just doesn't seem The MacWay™...

    This is probably because you had it set to copy everything automatically in the first place and then you switched that option off. We run into the same problem and, unfortunately, you just have to bear the huge download of the last 4 years worth of Apple updates... Once that has been downloaded SUS will obey new settings. You may need to manually enable the updates if you changed that setting since the download started.
    Mind it, since you would have everything there anyway there would be less of an issue leaving on the automatic download option...

  • Is there a way to change the Windows Update service startup type on Windows Server 2012 R2?

    We have a number of newly built 2012 R2 servers that we have HP Operations Manager agent running on that monitors the status of several services and reports if they are "stopped". One of these services is Windows Update. Every day we
    get at least one alert saying:
    "Service "Windows Update" is not started. Current state is stopped"
    Checking the event logs shows that the Windows Update service stops, then a while later it just starts again. Not an error, just an information event.
    In Windows 2012 R2 the Windows Update service is set to "Automatic (Trigger Start)", where in previous versions we run (2012/2008R2) it would be set to just "Automatic" or "Automatic (Delayed Start)"
    I have come to understand that this behaviour is normal for Windows 2012 R2, and that Trigger Start services by design stop themselves after a period of inactivity. I was unable to find any info on how this works. Our client would like this to
    be changed and the Windows Update service stay running all the time, understanding that this impacts performance.
    Is there a way to change the Windows Update service in Server 2012 R2 to the old Automatic startup behaviour so that it stays running all the time instead of stopping and starting periodicall? There is no option to do this via the services mmc
    gui.
    So far I have tried:
    Removing the Triggers using the command: sc triggerinfo wuauserv delete
    This works temporarily, the service then shows as just Automatic in the services console, however if you restart the server or restart the service it goes right back to being Automatic (Trigger Start).
    Any kind of help would be appreciated.

    This one might help.
    Allow configuration of Automatic Updates in Windows 8 and Windows Server 2012
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Problems with Lion Software Update service

    I just recently upgraded our Xserve to Lion server so we could start deploying Lion clients.  The upgrade seemed to go fine, but the Software Update service may end up being a deal breaker.  I can get Lion clients to connect to the server for updates, that is not a problem.  The problem is when Lion client says it needs to download additional software to run a program, in our case a Java runtime environment.  When it looks on the software update server it says "The software is currently unavailable, please try again later."  If I point it back to Apple it works just fine.  We need to have our clients recieving updates locally for bamdwisth reasons, but if they cant get the software that they need then it makes having a local SU server useless.  Anyone know how to fix that?  And on a side note the new Server app that is supplied with Lion doesn't list SU as a service, and I can't figure out how to add or remove the services.  Am I missing something?  Thanks.

    To access many of the Server Tools in Lion Server you'll have to go to apple's website and download the Server Admin for 10.7 Server. This is the familar to 10.6.x server admin tool that apple does not include as the standard set of tools. Once you download it you'll have access to these additional services via the GUI:
    DHCP
    DNS
    Firewall
    Mail
    NAT
    NetBoot
    Open Directory
    Podcast Producer
    RADIUS
    Software Update Xgrid
    LJS

  • The lastest version of Flash on my pc has a typo in the properties, see as follows: "Adober Flashr Player Update Service 13.0 r0". Notice the "r" at the end of both Adobe and Flash. Is this malware of just a poorly completed application?

    Is this malware, OR just a poorly completed application?
    It updates to a version that is not the absolute latest on the Adobe website downloads page which is what first got my attention. Yesterday I had to delete the updater executable to get Flash to update to the latest. Yet today here goes the updater again with the properties: "Adober Flashr Player Update Service 13.0 r0".

    Can you post a screenshot of what you see: https://forums.adobe.com/thread/1070933

  • Error while installing the BAM Updater Service in Windows

    Hi all,
    I am getting an error while installing the BAM updater service in Windows. When i type the "oraclebpmdatawarehouse install " command in the command prompt it gives error as follows:
    d:\OraBPMEnterpriseHome\bin>oraclebpmwarehouse install
    Installing...
    wrapper | OpenSCManager failed - Access is denied. (0x5)
    Please can anyone tell me how to get rid of this error.
    I have already done everything else like setting the database and other things.
    Thanks.

    From the error message you specified, I guess you are trying to install MS Office SP2 package. If you are then its not MS Office package its just a Service Pack; something like a patch. You need to install a Full Base package first. Again, as mentioned by Rajiv - refer to MS Support

  • Configuration failed for Windows Server Update Services on Server 2012 R2 Essentials (Trial Version)

    Hi,
    I'm trying to setup the WSUS on the Server 2012 R2 Essentials (Trial Version) but with no luck. Below are the logs generated. Hopefully someone can guide me on this. Thanks.
    2014-10-15 12:23:06  Postinstall started
    2014-10-15 12:23:06  Detected role services: Api, UI, WidDatabase, Services
    2014-10-15 12:23:06  Start: LoadSettingsFromXml
    2014-10-15 12:23:06  Start: GetConfigValue with filename=UpdateServices-Services.xml item=ContentLocal
    2014-10-15 12:23:06  Value is true
    2014-10-15 12:23:06  End: GetConfigValue
    2014-10-15 12:23:06  Start: GetConfigValue with filename=UpdateServices-Services.xml item=ContentDirectory
    2014-10-15 12:23:06  Value is C:\WSUS
    2014-10-15 12:23:06  End: GetConfigValue
    2014-10-15 12:23:06  Content directory is C:\WSUS
    2014-10-15 12:23:06  Database roleservice is not installed
    2014-10-15 12:23:06  End: LoadSettingsFromXml
    Post install is starting
    2014-10-15 12:23:06  Start: Run
    2014-10-15 12:23:06  Fetching WsusAdministratorsSid from registry store
    2014-10-15 12:23:06  Value is S-1-5-21-308464661-3380577483-199018475-1000
    2014-10-15 12:23:06  Fetching WsusReportersSid from registry store
    2014-10-15 12:23:06  Value is S-1-5-21-308464661-3380577483-199018475-1001
    2014-10-15 12:23:19  Configuring content directory...
    2014-10-15 12:23:19  Configuring groups...
    2014-10-15 12:23:19  Starting group configuration for WSUS Administrators...
    2014-10-15 12:23:19  Found group in regsitry, attempting to use it...
    2014-10-15 12:23:22  Writing group to registry...
    2014-10-15 12:23:22  Finished group creation
    2014-10-15 12:23:22  Starting group configuration for WSUS Reporters...
    2014-10-15 12:23:22  Found group in regsitry, attempting to use it...
    2014-10-15 12:23:22  Writing group to registry...
    2014-10-15 12:23:22  Finished group creation
    2014-10-15 12:23:22  Configuring permissions...
    2014-10-15 12:23:22  Fetching content directory...
    2014-10-15 12:23:22  Fetching ContentDir from registry store
    2014-10-15 12:23:22  Value is C:\WSUS
    2014-10-15 12:23:22  Fetching group SIDs...
    2014-10-15 12:23:22  Fetching WsusAdministratorsSid from registry store
    2014-10-15 12:23:22  Value is S-1-5-21-308464661-3380577483-199018475-1000
    2014-10-15 12:23:22  Fetching WsusReportersSid from registry store
    2014-10-15 12:23:22  Value is S-1-5-21-308464661-3380577483-199018475-1001
    2014-10-15 12:23:22  Creating group principals...
    2014-10-15 12:23:22  Granting directory permissions...
    2014-10-15 12:23:23  Granting permissions on content directory...
    2014-10-15 12:23:23  Granting registry permissions...
    2014-10-15 12:23:23  Granting registry permissions...
    2014-10-15 12:23:23  Granting registry permissions...
    2014-10-15 12:23:23  Configuring shares...
    2014-10-15 12:23:23  Configuring network shares...
    2014-10-15 12:23:23  Fetching content directory...
    2014-10-15 12:23:23  Fetching ContentDir from registry store
    2014-10-15 12:23:23  Value is C:\WSUS
    2014-10-15 12:23:23  Fetching WSUS admin SID...
    2014-10-15 12:23:23  Fetching WsusAdministratorsSid from registry store
    2014-10-15 12:23:23  Value is S-1-5-21-308464661-3380577483-199018475-1000
    2014-10-15 12:23:23  Content directory is local, creating content shares...
    2014-10-15 12:23:25  Creating share "UpdateServicesPackages" with path "C:\WSUS\UpdateServicesPackages" and description "A network share to be used by client systems for collecting all software packages (usually applications) published
    on this WSUS system."
    2014-10-15 12:23:25  Creating share...
    2014-10-15 12:23:25  Share successfully created
    2014-10-15 12:23:25  Creating share "WsusContent" with path "C:\WSUS\WsusContent" and description "A network share to be used by Local Publishing to place published content on this WSUS system."
    2014-10-15 12:23:26  Creating share...
    2014-10-15 12:23:26  Share successfully created
    2014-10-15 12:23:26  Creating share "WSUSTemp" with path "C:\Program Files\Update Services\LogFiles\WSUSTemp" and description "A network share used by Local Publishing from a Remote WSUS Console Instance."
    2014-10-15 12:23:27  Creating share...
    2014-10-15 12:23:27  Share successfully created
    2014-10-15 12:23:27  Finished creating content shares
    2014-10-15 12:23:27  Stopping service WSUSService
    2014-10-15 12:23:27  Stopping service W3SVC
    2014-10-15 12:23:27  Configuring WID database...
    2014-10-15 12:23:27  Configuring the database...
    2014-10-15 12:23:27  Establishing DB connection...
    2014-10-15 12:23:27  Checking to see if database exists...
    2014-10-15 12:23:28  Database exists
    2014-10-15 12:23:28  Switching database to single user mode...
    2014-10-15 12:23:32  Loading install type query...
    2014-10-15 12:23:32  DECLARE @currentDBVersion       int
    DECLARE @scriptMajorVersion     int = (9600)
    DECLARE @scriptMinorVersion     int = (16384)
    DECLARE @databaseMajorVersion   int 
    DECLARE @databaseMinorVersion   int 
    DECLARE @databaseBuildNumber    nvarchar(10)
    IF NOT EXISTS(SELECT * FROM sys.databases WHERE name='SUSDB')
    BEGIN
        SELECT 1
    END
    ELSE
    BEGIN
        SET @currentDBVersion = (SELECT SchemaVersion FROM SUSDB.dbo.tbSchemaVersion WHERE ComponentName = 'CoreDB')
        SET @databaseBuildNumber = (SELECT BuildNumber FROM SUSDB.dbo.tbSchemaVersion WHERE ComponentName = 'CoreDB')
        DECLARE @delimiterPosition INT = CHARINDEX('.', @databaseBuildNumber)
        IF (@delimiterPosition = 0)
        BEGIN
            RAISERROR('Invalid schema version number', 16, 1) with nowait
            return 
        END 
        SET @databaseMajorVersion = SUBSTRING(@databaseBuildNumber, 1, @delimiterPosition - 1)
        SET @databaseMinorVersion = SUBSTRING(@databaseBuildNumber, (@delimiterPosition + 1), (10 - @delimiterPosition))
        IF @currentDBVersion < 926
        BEGIN
            SELECT 3
        END
        ELSE
        BEGIN
            IF (@scriptMajorVersion > @databaseMajorVersion OR
               (@scriptMajorVersion = @databaseMajorVersion AND @scriptMinorVersion > @databaseMinorVersion))
            BEGIN
                SELECT 2
            END
            ELSE IF (@scriptMajorVersion = @databaseMajorVersion AND
                     @scriptMinorVersion = @databaseMinorVersion)
            BEGIN
                SELECT 0
            END
            ELSE
            BEGIN
                SELECT 4
            END
        END
    END
    2014-10-15 12:23:32  Install type is: Reinstall
    2014-10-15 12:23:32  Creating logins...
    2014-10-15 12:23:32  Fetching account info for S-1-5-20
    2014-10-15 12:23:32  Found principal
    2014-10-15 12:23:32  Found account
    2014-10-15 12:23:32  Got binary SID
    2014-10-15 12:23:35  Fetching WsusAdministratorsSid from registry store
    2014-10-15 12:23:35  Value is S-1-5-21-308464661-3380577483-199018475-1000
    2014-10-15 12:23:35  Fetching account info for S-1-5-21-308464661-3380577483-199018475-1000
    2014-10-15 12:23:35  Found principal
    2014-10-15 12:23:35  Found account
    2014-10-15 12:23:35  Got binary SID
    2014-10-15 12:23:35  Setting content location...
    2014-10-15 12:23:35  Fetching ContentDir from registry store
    2014-10-15 12:23:35  Value is C:\WSUS
    2014-10-15 12:23:40  Swtching DB to multi-user mode......
    2014-10-15 12:23:47  Finished setting multi-user mode
    2014-10-15 12:23:47  Writing DB settings to registry...
    2014-10-15 12:23:47  Marking PostInstall done for UpdateServices-WidDatabase in the registry...
    2014-10-15 12:23:47  Starting service W3SVC
    2014-10-15 12:23:47  Configuring IIS...
    2014-10-15 12:23:47  Start: ConfigureWebsite
    2014-10-15 12:23:51  System.Runtime.InteropServices.COMException (0x80070003): The system cannot find the path specified.
       at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
       at System.DirectoryServices.DirectoryEntry.Bind()
       at System.DirectoryServices.DirectoryEntry.get_AdsObject()
       at System.DirectoryServices.PropertyValueCollection.PopulateList()
       at System.DirectoryServices.PropertyValueCollection..ctor(DirectoryEntry entry, String propertyName)
       at System.DirectoryServices.PropertyCollection.get_Item(String propertyName)
       at Microsoft.UpdateServices.Administration.UseCustomWebSite..ctor()
       at Microsoft.UpdateServices.Administration.PostInstall.ConfigureWebsite(Int32 portNumber)
       at Microsoft.UpdateServices.Administration.PostInstall.Run()
       at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)
    Fatal Error: The system cannot find the path specified.

    2014-10-15 12:23:47  Start: ConfigureWebsite
    2014-10-15 12:23:51  System.Runtime.InteropServices.COMException (0x80070003): The system cannot find the path specified.
    Looks like it failed trying to setup the website.
    2014-10-15 12:23:27  Configuring WID database...
    2014-10-15 12:23:27  Configuring the database...
    2014-10-15 12:23:27  Establishing DB connection...
    2014-10-15 12:23:27  Checking to see if database exists...
    2014-10-15 12:23:28  Database exists
    This also looks like its a RE-installation of WSUS.
    Any chance the "WSUS Administration" v-root is already present and did not get deleted after the last uninstallation?
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • Can not update service call

    Hello
    i try to update Service Call  and i get this error :
    This entry is already exists in the following tables ASC5 ODBC-2035
    and i can not update.
    how can i solve this error?
    Edited by: Einat Yulzari on Dec 14, 2010 10:11 AM

    Hello,
    You have to restore the numbering series to get this issue resolved however, this has to be done under supervision of SAP. You may take a back up of the database, restore the numbering series to see if this issue still exists or not?
    Thanks,
    Joseph

  • Could not find a part of the path 'C:\Program Files\Update Services\Schema\

    clean SC 2012 R2 RTM.
    1. had problems with WSUS installation/post configuration
    2. found a blog with an identical problem where the problem was solved with the call to Microsoft. Tools directory was missing.
    I followed the suggestion: reinstalled WSUS using ps and wsusutil.
    I canceled WSUS configuration at recommended step. Everything looked fine.
    But after SUP creation I found SMS_WSUS_CONFIGURATION_MANAGER warning.
    I checked WCM.log and found Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.
    When checked there was no Schema folder in the path above. So it's just missing as folder TOOLS before troubleshooting.
    Any suggestions for fixing this.
    Thanks.
    Here is partial WCM that could help to find the issue, I clearly see that there is no Schema directory in C:\Program Files\Update Services:
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Verify Upstream Server settings on the Active WSUS Server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    No changes - WSUS Server settings are correctly configured and Upstream Server is set to Microsoft Update SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Refreshing categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Successfully refreshed categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:14 PM 4536 (0x11B8)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:20 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:20 PM 4536 (0x11B8)
    Successfully inserted WSUS Enterprise Update Source object {91F81925-CC1D-40C0-98C3-902AD3717594} SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:21 PM 4536 (0x11B8)
    Configuration successful. Will wait for 1 minute for any subscription or proxy changes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:21 PM 4536 (0x11B8)
    Setting new configuration state to 2 (WSUS_CONFIG_SUCCESS) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:21 PM 4536 (0x11B8)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:21 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:21 PM 4536 (0x11B8)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~   at System.IO.__Error.WinIOError(Int32
    errorCode, String maybeFullPath)~~   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath,
    Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)~~   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)~~  
    at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)~~   at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)~~   at System.Xml.XmlTextReaderImpl.FinishInitUriString()~~  
    at System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)~~   at System.Xml.Schema.XmlSchemaSet.Add(String targetNamespace, String schemaUri)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage.Verify(String
    packageFile)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage..ctor(String packageFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String sdpFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String
    sdpFile)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    ERROR: Failed to publish sms client to WSUS, error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    STATMSG: ID=6613 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=confman.contoso.lan SITE=MON PID=1716 TID=4536 GMTDATE=Sat Dec 07 22:10:22.831 2013 ISTR0="8427071A-DA80-48C3-97DE-C9C528F73A2D" ISTR1="5.00.7958.1000"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    Failed to publish client with error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    completed checking for client deployment SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    HandleSMSClientPublication failed. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    Shutting down... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:51:31 PM 4536 (0x11B8)
    Shutting Down... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:51:31 PM 4536 (0x11B8)
    SMS_EXECUTIVE started SMS_WSUS_CONFIGURATION_MANAGER as thread ID 4168 (0x1048). SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:38 PM 2008 (0x07D8)
    This confman.contoso.lan system is the SMS Site Server. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Populating config from SCF SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Setting new configuration state to 1 (WSUS_CONFIG_PENDING) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Changes in active SUP list detected. New active SUP List is: SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
        SUP0: confman.contoso.lan, group = CONFMAN, nlb = SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Updating active SUP groups... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Waiting for changes for 1 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Wait timed out after 0 minutes while waiting for at least one trigger event. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:43 PM 4168 (0x1048)
    Timed Out... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Checking runtime v2.0.50727... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Did not find supported version of assembly Microsoft.UpdateServices.Administration. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Checking runtime v4.0.30319... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Found supported assembly Microsoft.UpdateServices.Administration version 4.0.0.0, file version 6.3.9600.16384 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Found supported assembly Microsoft.UpdateServices.BaseApi version 4.0.0.0, file version 6.3.9600.16384 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Supported WSUS version found SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:55 PM 4168 (0x1048)
    Verify Upstream Server settings on the Active WSUS Server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:55 PM 4168 (0x1048)
    No changes - WSUS Server settings are correctly configured and Upstream Server is set to Microsoft Update SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Setting new configuration state to 4 (WSUS_CONFIG_SUBSCRIPTION_PENDING) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Refreshing categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Successfully refreshed categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:27 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:32 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:32 PM 4168 (0x1048)
    Configuration successful. Will wait for 1 minute for any subscription or proxy changes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:32 PM 4168 (0x1048)
    Setting new configuration state to 2 (WSUS_CONFIG_SUCCESS) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:32 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:32 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:32 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:34 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:34 PM 4168 (0x1048)
    PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~   at System.IO.__Error.WinIOError(Int32
    errorCode, String maybeFullPath)~~   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath,
    Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)~~   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)~~  
    at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)~~   at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)~~   at System.Xml.XmlTextReaderImpl.FinishInitUriString()~~  
    at System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)~~   at System.Xml.Schema.XmlSchemaSet.Add(String targetNamespace, String schemaUri)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage.Verify(String
    packageFile)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage..ctor(String packageFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String sdpFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String
    sdpFile)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    ERROR: Failed to publish sms client to WSUS, error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    STATMSG: ID=6613 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=confman.contoso.lan SITE=MON PID=1668 TID=4168 GMTDATE=Sat Dec 07 22:55:35.051 2013 ISTR0="8427071A-DA80-48C3-97DE-C9C528F73A2D" ISTR1="5.00.7958.1000"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    Failed to publish client with error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    completed checking for client deployment SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    HandleSMSClientPublication failed. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    Trigger event array index 0 ended. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    SCF change notification triggered. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:40 PM 4168 (0x1048)
    Populating config from SCF SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:40 PM 4168 (0x1048)
    Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:40 PM 4168 (0x1048)
    "When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

    >Any Errors in SUPSetup.log and WSUSCtrl.log log files?
    No errors in these files. As I mentioned there is no Schema folder in  Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~ 
    Here are 3 repetitive errors in WCM.log:
    1. PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~   at System.IO.__Error.WinIOError(Int32
    errorCode, String maybeFullPath)~~   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath,
    Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)~~   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)~~  
    at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)~~   at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)~~   at System.Xml.XmlTextReaderImpl.FinishInitUriString()~~  
    at System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)~~   at System.Xml.Schema.XmlSchemaSet.Add(String targetNamespace, String schemaUri)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage.Verify(String
    packageFile)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage..ctor(String packageFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String sdpFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String
    sdpFile)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile)
    2. Failed to publish client with error = 0x80070003
    3. HandleSMSClientPublication failed.
    "When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

  • Mavericks 10.9.1 update not appearing in Server's Software Update service?

    While I have been able to update my server to 10.9.1, my client computers all rely upon my server for their software updates.  And although i have repeatedly had the Software Update service fetch all new updates over the last day or so, the Mavericks 10.9.1 update still isn't showing up.
    Does anyone else who is using the Software Update service actually have that update available to them, or is this a case of Apple simply not having made this update available to that service yet?  And if so, does anyone have an idea of how much of a delay should I expect?

    Hi again
    Try running the following command in the terminal on your clients:
    defaults read /Library/Preferences/com.apple.SoftwareUpdate CatalogURL
    The desired return value should be*:
    http://server.mydomain.com:8088/content/catalogs/others/index-10.9-mountainlion- lion-snowleopard-leopard.merged-1.sucatalog
    *The base URL might be different depending on if you are using standard SU settings or if you have moved the files somewhere else.
    If this is not your return value try running this on your clients again:
    sudo defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL http://server.mydomain.com:8088/content/catalogs/others/index-10.9-mountainlion- lion-snowleopard-leopard.merged-1.sucatalog
    You can reset the settings by running this command:
    sudo defaults delete /Library/Preferences/com.apple.SoftwareUpdate CatalogURL

  • [Oracle BPM 6.0.2 - formerly ALBPM 6.0.2] Error using BAM Updater Service

    Hi All -
    I'm getting a similar error to the one below (posted byFabricio Soares) when the BAM updates service is working. We are using ALBPM 6.0.2 alongwith Oracle OID / LDAP (integrated using a custom FDI plugin).
    Any idea what could cause this problem? I've verified the BAM configuration - and the database tables exist (though are empty...).
    Thanks in advance -
    Deepak Natarajan
    From: Fabricio Soares [mailto:[email protected]]
    Sent: 17. december 2008 14:10
    To: /USER bpmblazers
    Subject: problem when I try to update the BAM
    Importance: High
    Hi Folks,
    I'm having the following problem when I try to update the BAM.
    If anyone knows about this problem I appreciate.
    In attachment have the complete logs files.
    Thanks and Regards,
    Stack trace:
    <S> 17/12/08 10:08:29]
    java.lang.NullPointerException:
    at fuego.analyzer.OrganizationMetadata.getDWInForOU(OrganizationMetadata.java:92)
    at fuego.analyzer.OrganizationMetadata.synchronizeParticipants(OrganizationMetadata.java:422)
    at fuego.analyzer.OrganizationMetadata.synchronize(OrganizationMetadata.java:135)
    at fuego.analyzer.UpdaterRunner.synchronizeMetadata(UpdaterRunner.java:467)
    at fuego.analyzer.UpdaterRunner.run(UpdaterRunner.java:280)
    at fuego.analyzer.UpdaterRunner.runUpdater(UpdaterRunner.java:183)
    at fuego.analyzer.service.BAMUpdaterRunnerService.run(BAMUpdaterRunnerService.java:135)
    at fuego.analyzer.service.WarehouseService$WarehouseServiceThread.runItem(WarehouseService.java:421)
    at fuego.analyzer.service.WarehouseService$WarehouseServiceThread.run(WarehouseService.java:354)
    [<S> 17/12/08 10:08:29] Updater runtime exception.
    Caused by:
    fuego.analyzer.UpdaterRuntimeException: Updater runtime exception.
    at fuego.analyzer.UpdaterRuntimeException.wrapException(UpdaterRuntimeException.java:87)
    at fuego.analyzer.UpdaterRunner.synchronizeMetadata(UpdaterRunner.java:518)
    at fuego.analyzer.UpdaterRunner.run(UpdaterRunner.java:280)
    at fuego.analyzer.UpdaterRunner.runUpdater(UpdaterRunner.java:183)
    at fuego.analyzer.service.BAMUpdaterRunnerService.run(BAMUpdaterRunnerService.java:135)
    at fuego.analyzer.service.WarehouseService$WarehouseServiceThread.runItem(WarehouseService.java:421)
    at fuego.analyzer.service.WarehouseService$WarehouseServiceThread.run(WarehouseService.java:354)
    Caused by: java.lang.NullPointerException:
    at fuego.analyzer.OrganizationMetadata.getDWInForOU(OrganizationMetadata.java:92)
    at fuego.analyzer.OrganizationMetadata.synchronizeParticipants(OrganizationMetadata.java:422)
    at fuego.analyzer.OrganizationMetadata.synchronize(OrganizationMetadata.java:135)
    at fuego.analyzer.UpdaterRunner.synchronizeMetadata(UpdaterRunner.java:467)
    ... 5 more

    I've received a reply from the support guys at BEA:
    I just got notified from several other engineers , here at the labs , that there’s an issue on the installer itself . The BUG report has been already filed .
    In the meantime the only alternative is to install ALBPM Studio 6.02 from scratch , with the following considerations :
    - Uninstall
    - Make sure that the directory had been fully erased
    - Reboot the machine
    - Install ALBPM 6.02
    - Apply the latest Hotfix

  • How to download older updates in Software Update Service?

    Hello,
    In our company, we have a mixture of Mac OS X 10.6.2, 10.6.3 and 10.6.4 servers. Due to proxy-restrictions, only one of these servers is able to download updates directly from Apple (this one has 10.6.4 installed). We have set up the Software Update Service on this server to distribute the updates to all other servers and at first sight, it seemed to work fine.
    However, we noticed that our Software Update Server is only downloading the most recent versions of all software updates. e.g. Security Update 2010-05 and Security Update 2009-05 are available, but not Security Updates 2009-01 up to 2009-04. They don't even show up in the list of available updates. Since Security Update 2009-05 requires at least 10.6.4 (but Security Update 2010-04 can still be installed on 10.6.2) we're unable to install any recent security update on our 10.6.2-servers.
    Is there a way to configure Software Update Service to download older Security Updates? Running a centralized update server offers little benefit to us if it doesn't allow to install security updates on older Mac OS X releases... Updating all servers to 10.6.4 is not an option, as the software running on the servers is not always supported on the very latest Mac OS X releases.
    Thanks,
    Filip

    fvvjqe3 wrote:
    Thanks for the suggestion. I just tried the following:
    - stop Software Update Service
    - remove /var/db/swupd/html and /etc/swupd to restore default settings
    - start SUS again
    - now both "Copy all updates from Apple" and "Delete outdated software updates" were unticked. That should be fine I suppose, as I don't want to download all the updates (e.g. we don't want printer drivers, Final Cut and so no), but only the ones we select. However, we still don't see e.g. Security Update 2010-04 in the list of available updates. Am I missing something here?
    2010-05 includes all the previous security updates, I cannot find any reference to a 2010-004 update for Snow Leopard, only for Leopard (10.5). There was a 2010-003 for Snow Leopard, Mac OS X 10.6.4 Update would also have included previous security updates. It looks like there was never a 2010-004 for Snow Leopard.

  • Error 1923: Adobe Acrobat Update Service (AdobeARMService) could not be installed

    When I try to update my copy of Adobe Reader, I get
    Error 1923: Adobe Acrobat Update Service (AdobeARMService) could not be installed.
    Verify that you have sufficient privileges to install system services.
    This occurs even when I run the install program with "Run as Administrator".
    And it occurs for release 11 and the older release 10.
    How do I get around this problem?

    Hi,
    Please check the following thread for solution: http://forums.adobe.com/message/4789492
    Thanks

  • Adobe flash player update service 11.3 r300 has stopped working, what causes it and how do I fix it?

    I get this message once and a while: "adobe flash player update service 11.3 r300 has stopped working"  I have reenstalled the flash player but it came back.  any ideas?

    This may help.
    https://bugbase.adobe.com/index.cfm?event=bug&id=3225162
    Good luck,
    Keith

Maybe you are looking for

  • Logical Database Tutorials

    Can any one provide me with the Logical Database Tutorials? I need basic explonation abt the LDB's, I mean their archtecture and how do hey work? Have a great day! Regards, Krishna Chaitanya

  • Ocfs with standard edition

    Dear all, We need to install 11.2.0.2 RAC on linux rhel Red Hat Enterprise Linux v5.5,x86-64 (64 bit machine) and client needs standard edition. Can I use OCFS with standard edition or do I have to use ASM ? kai

  • Discs Will Not Eject from Internal or External Burner

    Am attempting to transfer my entire iTunes libraries to iTunes on a new PC. I go to backup on disk, choose "Backup entire iTunes Library and playlists", select the burner, and leave preferred speed at max possible. It says it will take six discs, I s

  • Blue selection when scrolling

    when i"m using the trackpad on my air, especially in safari, it will select the text (in blue) and sometimes click without me clicking...Is this a software issue?

  • Accessing Variant config characterisctics during CONDITION BASE formula

    Hi, I would like to access the characteristics values for a variant config during the SD pricing in the order. Since I don't have the batch at that point, how to I read from the variant itself? The document may not even be saved at that point yet. An