Update should not happen in the name of WF-BATCH

Hi All,
I have a requirement to change the WF-BATCH to the other user id.
The task completion or update should not happen in the name of WF-BATCH, instead it should happen with the name of the other user id.
Please can anybody suggest on this..
Thanks and Best Regards,
Sushmitha

Hello Sushmitha,
Like I said, it is only working if a previous step was a dialog step for the same user.
Then when all steps have advance with dialog it will automatically execute the "background" step (which is now dialog).
If the "background" step is the first to be executed then this scenario does not work.
It will only work if the agent has a previous work item AND is the one you want as the changed_by user.
A work around would be to either
a) check what the method does. If it executes a FM and if that FM has a parameter for changed by you can create a new method where you pass the changed_by user
b) check if a bapi/fm exists which allows you to change the user
c) create a program to execute the same logic as the method. Now you must create a new method where you can schedule this program as a background job with another user as the person who executes it.
Kind regards, Rob Dielemans

Similar Messages

Update does not happen in the infostructure

I have created an infostructure with 2 key figures
Invoiced quantity                 VD         A     03
Order quantity                     VA        A     03
Rules for Key figure invoiced quantity are
Source table   MCVBRP
source field name FKIMG
Rules for Key figure order quantity are
Source table   MCVBAP
source field name KWMENG
Rules for characteristic invoiced quantity are
Sales organization       MCVBRK                 VKORG
Division                       MCVBRK                 SPART
Material                       MCVBRP                 MATNR
Plant                           MCVBRP                 WERKS
Rules for characteristic order quantity are
Sales organization       MCVBAK                 VKORG
Division                       MCVBAK                 SPART
Material                       MCVBAP                 MATNR
Plant                           MCVBAP                 WERKS
the updating parameter is Synchronous updating
When I test this in MC30, the infostructure does not update, and I get the following information message.
Information 310 ***** No formula, requirement or external routine used
Message no. M2310
Diagnosis
When determining the key figure neither a formula, nor a requirement nor
an external routine are used.
Please let me know what setting I have to carry out to do the updating?

Dear,
Please refer the OSS Notes 377165 and 18613.
Useful transaction for infostructures - MC18,MC21,MC24 and MC30.
Check T.code OMOD for OS22 it should be should be set to asynchronous update.
Regards,
R.Brahmankar

Should not happen unless default context failed to deploy

 Can somebody please throw some light on this error?
 <Mar 5, 2001 10:07:26 AM EST> <Error> <HTTP> <HttpServer5173817,null
 default ctx,POSDev01) found no context for "GET /classes/ringout_statelessSession3@/RingoutSessionBeanHomeImpl_WLStub.class
 HTTP/1.0". This should not happen unless the default context failed
 to deploy.>
 Myself and lot of other people in my team are getting this error
 when using beans in a cluster.
 I am getting this error consistently whenever I make some code
 changes in my bean class (not interface changes) and redeploy it
 and try to lookup through a stand-alone client.
 The only way I could find to overcome this problem is:
 1) edit config.xml to remove the Application element completely
 corresponding to the bean
 2) remove jar files from the applications directory
 3) re-deploy and run the client again.
 Thanks a lot
 Kiran Ganuthula


Partly it could be WLS problem also. Under any circumstances default webapp should be able
 to deploy. I have seen somebody else also reported the same problem. The current problem is
 if you delete anything from apps dir, the corresponding entry is not being deleted from config.xml
 So next time when you boot the server, it tries to deploy the webapp and eventually it fails.
 I 'm not sure if this is the situation in your case.
 In anycase somehow Targets tag is not being picking up. That's why i asked you add
 "WebServers" tag. I think we have done some major changes in SP1, to make sure that
 default webapp deploys all the times.
 If you still have problems, post it to servlet or management group, we will discuss there.
 Kumar
 Kiran G wrote:
 > I edited the config.xml ONLY after getting this error. And, it worked.
 >
 > BTW, can you please be more specific about the changes to config.xml
 > to solve the problem?
 > If possible, can you give pertinent portion(s) of config.xml, highlighting
 > the changes.
 >
 > Thanks
 > Kiran G
 >
 > Kumar Allamraju <[email protected]> wrote:
 > >
 > >
 > >It appears your "default webapp" failed to deploy.
 > >Did you messed up with the config.xml?.
 > >
 > >Add the following to your default webapp tag?
 > >
 > ><Application
 > > Deployed="true"
 > > Name="DefaultWebApp_vindev1"
 > > Path="./config/vindev1/applications"
 > > >
 > > <WebAppComponent
 > > Name="DefaultWebApp_vindev1"
 > > Targets="vindev1"
 > > WebServers="vindev1"
 > > URI="DefaultWebApp_vindev1"
 > > />
 > > </Application>
 > >
 > >
 > >Here vindev1 is my domain's name..
 > >
 > >BTW, this is not a clustering question. So you better
 > >post it to servlet newsgroup where you get much
 > >better answers..
 > >
 > >Kiran G wrote:
 > >
 > >> I forgot to give these details about the problem.
 > >> I am running this cluster using WebLogic 6.0 on a SUN
 > >sparc machine.
 > >>
 > >> The error text given in my original posting appears
 > >in the managed
 > >> weblogic server's log. The exception that the client
 > >receives while
 > >> lookup is :
 > >>
 > >> javax.naming.CommunicationException. Root exception
 > >is java.rmi.UnmarshalException:
 > >> failed to unmarshal class java.lang.Object; nested exception
 > >is:
 > >> java.lang.ClassNotFoundException: RingoutSessionBeanHomeImpl_WLStub
 > >> java.lang.ClassNotFoundException: RingoutSessionBeanHomeImpl_WLStub
 > >>
 > >> "Kiran G" <[email protected]> wrote:
 > >> >
 > >> >Can somebody please throw some light on this error?
 > >> >
 > >> ><Mar 5, 2001 10:07:26 AM EST> <Error> <HTTP> <HttpServer5173817,null
 > >> >default ctx,POSDev01) found no context for "GET /classes/ringout_statelessSession3@/RingoutSessionBeanHomeImpl_WLStub.class
 > >> >HTTP/1.0". This should not happen unless the default
 > >context
 > >> >failed
 > >> >to deploy.>
 > >> >
 > >> >Myself and lot of other people in my team are getting
 > >> >this error
 > >> >when using beans in a cluster.
 > >> >
 > >> >I am getting this error consistently whenever I make
 > >some
 > >> >code
 > >> >changes in my bean class (not interface changes) and
 > >redeploy
 > >> >it
 > >> >and try to lookup through a stand-alone client.
 > >> >
 > >> >The only way I could find to overcome this problem
 > >is:
 > >> >1) edit config.xml to remove the Application element
 > >completely
 > >> >corresponding to the bean
 > >> >2) remove jar files from the applications directory
 > >> >3) re-deploy and run the client again.
 > >> >
 > >> >Thanks a lot
 > >> >Kiran Ganuthula
 > >> >
 > >> >
 > >> >
 > >> >
 > >> >
 > >
 > >
 > ><!doctype html public "-//w3c//dtd html 4.0 transitional//en">
 > ><html>
 > >It appears your "default webapp" failed to deploy.
 > > Did you messed up with the config.xml?.
 > >Add the following to your default webapp tag?
 > ><Application
 > > Deployed="true"
 > > Name="DefaultWebApp_vindev1"
 > > Path="./config/vindev1/applications"
 > > >
 > > <WebAppComponent
 > > Name="DefaultWebApp_vindev1"
 > > Targets="vindev1"
 > > 
 > >WebServers="vindev1"
 > > URI="DefaultWebApp_vindev1"
 > > />
 > > </Application>
 > > 
 > >Here vindev1 is my domain's name..
 > > 
 > >BTW, this is not a clustering question. So you better
 > >post it to servlet
 > >newsgroup where you get much
 > > better answers..
 > >Kiran G wrote:
 > ><blockquote TYPE=CITE>I forgot to give these details about
 > >the problem.
 > > I am running this cluster using WebLogic 6.0 on a
 > >SUN sparc machine.
 > >The error text given in my original posting appears
 > >in the managed
 > > weblogic server's log. The exception that the client
 > >receives while
 > > lookup is :
 > >javax.naming.CommunicationException. Root exception
 > >is java.rmi.UnmarshalException:
 > > failed to unmarshal class java.lang.Object; nested
 > >exception is:
 > > java.lang.ClassNotFoundException:
 > >RingoutSessionBeanHomeImpl_WLStub
 > > java.lang.ClassNotFoundException: RingoutSessionBeanHomeImpl_WLStub
 > >"Kiran G" <[email protected]> wrote:
 > > >
 > > >Can somebody please throw some light on this error?
 > > >
 > > ><Mar 5, 2001 10:07:26 AM EST> <Error> <HTTP>
 > ><HttpServer5173817,null
 > > >default ctx,POSDev01) found no context for "GET /classes/ringout_statelessSession3@/RingoutSessionBeanHomeImpl_WLStub.class
 > > >HTTP/1.0". This should not happen unless the default
 > >context
 > > >failed
 > > >to deploy.>
 > > >
 > > >Myself and lot of other people in my team are getting
 > > >this error
 > > >when using beans in a cluster.
 > > >
 > > >I am getting this error consistently whenever I make
 > >some
 > > >code
 > > >changes in my bean class (not interface changes)
 > >and redeploy
 > > >it
 > > >and try to lookup through a stand-alone client.
 > > >
 > > >The only way I could find to overcome this problem
 > >is:
 > > >1) edit config.xml to remove the Application element
 > >completely
 > > >corresponding to the bean
 > > >2) remove jar files from the applications directory
 > > >3) re-deploy and run the client again.
 > > >
 > > >Thanks a lot
 > > >Kiran Ganuthula
 > > >
 > > >
 > > >
 > > >
 > > ></blockquote>
 > ></html>
 > >
 > >
 [att1.html]

Issue in Workflow- Field Update is not happening

Hi Friends,
I am facing an issue to update a check box field Released.
I have created a task having Advance with Dialog opiton,Background processing to update the Checkbox field.
The BOR Object type used is BUS1006 and method is CHANGE. Everything looks fine when tested the task as well as the workflow in test mode and it is working fine in both the cases. But some how, this field update is not happening over the CRM 2007 Web UI. We are assuming it is due to user authorizations or some other settings ( like assignment of backend user to the workflow)
for doing this task. Can some one give us some pointers on this. This will be of great help.
Thanks,
Udaya

Hi Imtiaz,
I am new to this. Can you please give me some pointers on how to check whether WF-BATCH has the needed authorisations and the process can be executed in background.
Reply me at your convenient time.
Thanks a lot for your response.
Regards,
Udaya

Can't update to ios7 on ipod touch 4th generation on this ipod. had facetime but now it requires ios7 so i have it no more and used it a lot with family. would have to buy new ipod. apple should not take away the capabilities you have already paid for

found out i can't update ipod touch 4th generation to ios7 which is now required to use facetime. have used facetime for several years with family now can't use. Apple should not take away the capabilities you already have paid for!!

No correct, you do not need iOS for FaceTime. You only needed to update to iOS 6.1.6.
Unable to make or receive FaceTime calls after April 16, 2014
If you are having problems:
iOS: Troubleshooting FaceTime

We have adobe acrobat pro installed on our computer - we have changed the password - but it is still not giving us access to update our adobe reader. The name is showing as Marriner. Is this linked to our account?

We have adobe acrobat pro installed on our computer - we have changed the password - but it is still not giving us access to update our adobe reader. The name is showing as Marriner. Is this linked to our account?

What is your operating system?
To install/update Adobe Reader or Acrobat you need to supply your computer's Administrator password.

HT3669 This software update keeps popping up almost everyday in my iMac 27 although I keep updating. Looks like the either the update is not happening on my machine or some other problem. Anyone else know of this?

This software update keeps popping up almost everyday in my iMac 27 although I keep updating. Looks like the either the update is not happening on my machine or some other problem. Anyone else know of this? Everytime I check for updates (I have the setting to manual check), an alert pops up in Apple store with the phrase "Lexmark Printer Software Update 2.11" available for download.
Is there a way I can turn off this notification for Printer updates until it is resolved? It is pretty annoying.
Thanks

Not sure this will help yet, having just noticed it myself, but you can now get the Lexmark driver 3.0 for download here: http://support.apple.com/kb/DL1397
I'm going to give that a try to see if I stop getting the constant reminder for 2.11.

JWSDP1.5: wscompile error: "(should not happen): tie.generator.002

Hi all,
I'm working with a doc/lit webservice; I have a WSDL and I'm attempting to generate Java artefacts with wscompile. I'm using JWSDP1.5. I've had a range of errors (I'm updating an old WSDL for the Tentative Hold Protocol, see http://www.w3.org/TR/tenthold-2/). The latest, though, is problematic. The final error message is:
error: generator error: internal error (should not happen): tie.generator.002I have included the full output from wscompile at the end of this posting; I'll post the full WSDL in a reply. Any advice would be much appreciated!
Cheers,
--Tim West
Full output (from wscompile Ant task) - added linebreaks for readability
Buildfile: C:\common\eclipse-projects\thp\build.xml
wscompile-init:
ANEW-generate-server-binding:
[wscompile] command line: wscompile -d C:\common\eclipse-projects\thp\zant-build \
-features:documentliteral,wsi -g -gen:server -keep -verbose \
C:\common\eclipse-projects\thp\server-wscompile-config.xml -classpath (path omitted for readability)
[wscompile] [CustomClassGenerator: generating JavaClass for: userDefinedBody]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdRequestHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdHeader]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdRequestAckHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdModifyRequestHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdModifyResponseChoiceHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdModifyGrantHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdGrantHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdModifyDenialHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdDenialHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdCancellationRequestHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdCancellationResponseHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdStatusQueryHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdStatusResponseBody]
[wscompile] [CustomClassGenerator: generating JavaClass for: statusStructure]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdStatusResponseHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: userDefinedBody]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdHeader]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdRequestHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdRequestAckHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdModifyRequestHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdGrantHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdModifyGrantHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdDenialHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdModifyDenialHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdModifyResponseChoiceHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdCancellationRequestHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdCancellationResponseHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdStatusQueryHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: statusStructure]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdStatusResponseBody]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdStatusResponseHdr]
[wscompile] error: generator error: internal error (should not happen): tie.generator.002
BUILD FAILED: C:\common\eclipse-projects\thp\build.xml:342: wscompile failed
Total time: 2 seconds

Hi again,
The offending WSDL is below. I should add that I Googled this and couldn't find anything useful. Axis is happy with the WSDL, as is the validator at http://www.soapclient.com/SoapTools.html (though I'm not sure of its quality). I'm now downloading IBM Websphere 6 to see how that goes.
Thanks again,
-Tim West
<?xml version="1.0" encoding="UTF-8"?>
<definitions
 name="TentativeHold"
 targetNamespace="http://www.w3.org/2001/08/thp/definitions"
 xmlns:tns="http://www.w3.org/2001/08/thp/definitions"
 xmlns:holdSchema="http://www.w3.org/2001/08/thp/schemas"
 xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
 xmlns="http://schemas.xmlsoap.org/wsdl/">
<types>
 <schema xmlns="http://www.w3.org/2001/XMLSchema"
 xmlns:holdSchema="http://www.w3.org/2001/08/thp/schemas"
 targetNamespace="http://www.w3.org/2001/08/thp/schemas">
 
 
 
 
 
 
 
 
 <complexType name="holdHeader">
 <sequence>
 <element name="holdID" type="int"/>
 <element name="customerID" type="string"/>
 <element name="replyTo" type="string"/>
 <element name="comment" type="string"/>
 </sequence>
 </complexType>
 
 
 
 
 
 
 <complexType name="userDefinedBody">
 <sequence>
 <element name="someRequestField" type="string"/>
 </sequence>
 </complexType>
 
 
 
 
 
 <complexType name="holdRequestHdr">
 <sequence>
 <element name="baseHeader" type="holdSchema:holdHeader"/>
 </sequence>
 </complexType>
 
 
 
 
 
 <complexType name="holdRequestAckHdr">
 <sequence>
 <element name="baseHeader" type="holdSchema:holdHeader"/>
 <element name="timeUntilResponse" type="duration"/>
 </sequence>
 </complexType>
 
 
 
 
 
 <complexType name="holdGrantHdr">
 <sequence>
 <element name="baseHeader" type="holdSchema:holdHeader"/>
 <element name="holdDuration" type="duration"/>
 </sequence>
 </complexType>
 
 
 
 
 
 <complexType name="holdDenialHdr">
 <sequence>
 <element name="baseHeader" type="holdSchema:holdHeader"/>
 <element name="reason" type="string"/>
 </sequence>
 </complexType>
 
 
 
 
 
 <complexType name="holdModifyRequestHdr">
 <sequence>
 <element name="modifiedHoldRequest" type="holdSchema:holdHeader"/>
 </sequence>
 </complexType>
 
 
 
 
 
 <complexType name="holdModifyGrantHdr">
 <sequence>
 <element name="modifiedHoldRequest" type="holdSchema:holdGrantHdr"/>
 </sequence>
 </complexType>
 
 
 
 
 
 <complexType name="holdModifyDenialHdr">
 <sequence>
 <element name="modifiedHoldRequest" type="holdSchema:holdDenialHdr"/>
 </sequence>
 </complexType>
 
 
 
 
 
 
 <complexType name="holdModifyResponseChoiceHdr">
 <sequence>
 <element name="grant" type="holdSchema:holdModifyGrantHdr"/>
 <element name="deny" type="holdSchema:holdModifyDenialHdr"/>
 </sequence>
 </complexType>
 
 
 
 
 
 <complexType name="holdCancellationRequestHdr">
 <sequence>
 <element name="customerHold" type="holdSchema:holdHeader"/>
 <element name="customerReason" type="string"/>
 </sequence>
 </complexType>
 
 
 
 
 
 <complexType name="holdCancellationResponseHdr">
 <sequence>
 <element name="customerHold" type="holdSchema:holdHeader"/>
 </sequence>
 </complexType>
 
 
 
 
 
 <complexType name="holdCancellationNotificationHdr">
 <sequence>
 <element name="customerHold" type="holdSchema:holdHeader"/>
 <element name="cancellationReason" type="string"/>
 </sequence>
 </complexType>
 
 
 
 
 
 <complexType name="holdStatusQueryHdr">
 <sequence>
 <element name="customerHold" type="holdSchema:holdHeader"/>
 </sequence>
 </complexType>
 
 
 
 
 
 <complexType name="holdStatusResponseHdr">
 <sequence>
 <element name="baseHeader" type="holdSchema:holdHeader"/>
 </sequence>
 </complexType>
 
 
 
 
 
 <complexType name="statusStructure">
 <sequence>
 <element name="itemHeader" type="holdSchema:holdHeader"/>
 <element name="holdState" type="string"/>
 </sequence>
 </complexType>
 
 
 
 
 
 
 <complexType name="holdStatusResponseBody">
 <sequence>
 <element name="holdItemsCount" type="int"/>
 <element name="itemList" type="holdSchema:statusStructure" minOccurs="0" maxOccurs="unbounded"/>
 </sequence>
 </complexType>
 
 
 
 
 
 
 <complexType name="holdError">
 <sequence>
 <element name="baseHeader" type="holdSchema:holdHeader"/>
 <element name="holdErrorType" type="int"/>
 <element name="holdErrorDesc" type="string"/>
 </sequence>
 </complexType>
 
 <element name="userDefinedBody" type="holdSchema:userDefinedBody"/>
 <element name="holdRequestHdr" type="holdSchema:holdRequestHdr"/>
 <element name="holdRequestAckHdr" type="holdSchema:holdRequestAckHdr"/>
 <element name="holdGrantHdr" type="holdSchema:holdGrantHdr"/>
 <element name="holdDenialHdr" type="holdSchema:holdDenialHdr"/>
 <element name="holdModifyRequestHdr" type="holdSchema:holdModifyRequestHdr"/>
 <element name="holdModifyGrantHdr" type="holdSchema:holdModifyGrantHdr"/>
 <element name="holdModifyDenialHdr" type="holdSchema:holdModifyDenialHdr"/>
 <element name="holdModifyResponseChoiceHdr" type="holdSchema:holdModifyResponseChoiceHdr"/>
 <element name="holdCancellationRequestHdr" type="holdSchema:holdCancellationRequestHdr"/>
 <element name="holdCancellationResponseHdr" type="holdSchema:holdCancellationResponseHdr"/>
 <element name="holdCancellationNotificationHdr" type="holdSchema:holdCancellationNotificationHdr"/>
 <element name="holdStatusQueryHdr" type="holdSchema:holdStatusQueryHdr"/>
 <element name="holdStatusResponseHdr" type="holdSchema:holdStatusResponseHdr"/>
 <element name="holdStatusResponseBody" type="holdSchema:holdStatusResponseBody"/>
 <element name="holdError" type="holdSchema:holdError"/>
 </schema>
</types>
<message name="HoldRequest">
 <part name="headerHoldRequest" element="holdSchema:holdRequestHdr"/>
 <part name="bodyHoldRequest" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldRequestAck">
 <part name="headerHoldRequestAck" element="holdSchema:holdRequestAckHdr"/>
 <part name="bodyHoldRequestAck" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldGrantResponse">
 <part name="headerHoldGrantResponse" element="holdSchema:holdGrantHdr"/>
 <part name="bodyHoldGrantResponse" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldDenialResponse">
 <part name="headerHoldDenialResponse" element="holdSchema:holdDenialHdr"/>
 <part name="bodyHoldDenialResponse" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldModifyRequest">
 <part name="headerHoldModifyRequest" element="holdSchema:holdModifyRequestHdr"/>
 <part name="bodyHoldModifyRequest" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldModifyResponse">
 <part name="headerHoldModifyResponse" element="holdSchema:holdModifyResponseChoiceHdr"/>
 <part name="bodyHoldModifyResponse" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldCancellationRequest">
 <part name="headerHoldCancellationRequest" element="holdSchema:holdCancellationRequestHdr"/>
 <part name="bodyHoldCancellationRequest" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldCancellationResponse">
 <part name="headerHoldCancellationResponse" element="holdSchema:holdCancellationResponseHdr"/>
 <part name="bodyHoldCancellationResponse" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldCancellationNotification">
 <part name="header" element="holdSchema:holdCancellationNotificationHdr"/>
 <part name="body" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldStatusQueryRequest">
 <part name="headerHoldStatusQueryRequest" element="holdSchema:holdStatusQueryHdr"/>
 <part name="bodyHoldStatusQueryRequest" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldStatusResponse">
 <part name="headerHoldStatusResponse" element="holdSchema:holdStatusResponseHdr"/>
 <part name="bodyHoldStatusResponse" element="holdSchema:holdStatusResponseBody"/>
</message>
<message name="HoldErrorResponse">
 
 <part name="bodyHoldErrorResponse" element="holdSchema:holdError"/>
</message>
<portType name="TentativeHoldServicePortType">
 <operation name="InitiateHold">
 <input message="tns:HoldRequest"/>
 <output message="tns:HoldRequestAck"/>
 
 </operation>
 <operation name="InitiateHoldModify">
 <input message="tns:HoldModifyRequest"/>
 <output message="tns:HoldModifyResponse"/>
 
 </operation>
 <operation name="InitiateHoldCancellation">
 <input message="tns:HoldCancellationRequest"/>
 <output message="tns:HoldCancellationResponse"/>
 
 </operation>
 <operation name="InitiateStatusQuery">
 <input message="tns:HoldStatusQueryRequest"/>
 <output message="tns:HoldStatusResponse"/>
 
 </operation>
</portType>
<portType name="TentativeHoldNotificationServicePortType">
 <operation name="NotifyHoldGranted">
 <output message="tns:HoldGrantResponse"/>
 </operation>
 <operation name="NotifyHoldDenied">
 <output message="tns:HoldDenialResponse"/>
 </operation>
 <operation name="NotifyServerHoldCancellation">
 <output message="tns:HoldCancellationNotification"/>
 </operation>
</portType>
<binding name="TentativeHoldSoapBinding" type="tns:TentativeHoldServicePortType">
 <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/>
 <operation name="InitiateHold">
 <soap:operation soapAction="http://www.w3.org/2001/08/thp/InitiateHold"/>
 <input>
 <soap:body use="literal"/>
 </input>
 <output>
 <soap:body use="literal"/>
 </output>
 
 </operation>
 <operation name="InitiateHoldModify">
 <soap:operation soapAction="http://www.w3.org/2001/08/thp/InitiateHoldModify"/>
 <input>
 <soap:body use="literal"/>
 </input>
 <output>
 <soap:body use="literal"/>
 </output>
 
 </operation>
 <operation name="InitiateHoldCancellation">
 <soap:operation soapAction="http://www.w3.org/2001/08/thp/InitiateHoldCancellation"/>
 <input>
 <soap:body use="literal"/>
 </input>
 <output>
 <soap:body use="literal"/>
 </output>
 
 </operation>
 <operation name="InitiateStatusQuery">
 <soap:operation soapAction="http://www.w3.org/2001/08/thp/InitiateStatusQuery"/>
 <input>
 <soap:body use="literal"/>
 </input>
 <output>
 <soap:body use="literal"/>
 </output>
 
 </operation>
</binding>
<service name="TentativeHoldService">
 <documentation> Mythical Tentative Hold Web service</documentation>
 <port name="TentativeHoldPort" binding="tns:TentativeHoldSoapBinding">
 <soap:address location="http://xyz.com/tentativeHold/"/>
 </port>
</service>
<service name="TentativeHoldNotificationService">
 <port name="NotificationPort" binding="tns:TentativeHoldSoapBinding">
 <soap:address location="http://xyz.com/tentativeHoldNotification"/>
 </port>
</service>
</definitions>

Should not happen at all...

Hello, I am extremely upset with Nokia.
After plugging in my Nokia 6280 the PC Suite notified me that there were updates available for my phone - naturally I clicked to continue and update my phone, making sure it was fully charged and connected properly. It was 'bricked.'
Upset, I decided to take to the internet to find out if this had happened to others and it seems its a major issue and is happening to many people.
This is insane. The update should not be offered if it is known to break mobiles.
I understand that if I take this to a Nokia Service Center then I will be able to have my problem corrected, is this right?
Do I need proof of purchase? As I am not sure I still have any.
Thanks,
Giuseppe Landolina

Ciao Giuseppe!
You should take a look at this:
6280 Updates (Still) Not Possible?
You will find it very useful.

PR to PO conversion should not happen in case of expired pricing condition in Info Record

Hi All,
Issue – PR to PO conversion should not happen in case of expired pricing condition in Info Record.
In case of creation of PR/ PO, the Price is pulled out from the Info Record of the material. In our case if the Price in the Info Record is expired, it should give the Error Message & should pick the Price from the last PO created for the same combination of Plant, Vendor, Company code.
Request you to please let us know if there is any way out.
Regards,
Karthick.V

Hi,
As per your requirement if info record price is not valid and in auto PO creation from PR, price should get picked from last PO, this is standard behavior and it will happen.
If you check in customization MM - Purchasing - Environment Data - Define Default Values for Buyers -Settings for default values
Default values if you check under price adoption , it has to be Always copy ( copying of conditions from last PO) . Pls check

Reversal of a reversed document should not happen

Dears
In our system, user is able to reverse an already reversed document, which should not happen.
In the Message Control F5 361, nothing has been changed to make this warning or information.
Hence the standard is 'error'. But why the system is allowing the reversal of a reversed document then ?
Could you please provide inputs ?

Hello Nikitha,
Please create one validation according to your requirement. PFB the relevant T codes to create validation.
GGB0 - Create Validation
OB28 - Activation of FI validations
GCT9 - Transport: Validations
Please let us know do you still require any more information
Thanks & Regards,
Lakshmi S

Related Content does not display on the name change page

Hi all,
Currently, i am doing some research for the related content. I find that delivery configuration has been on the Name Change component (self service). Then I do the security configuration but the related content option does not display on the name change component. No idea which step next i should take.
Please advise.
Any reference or docs is also welcomed.
Dennis

Hi,
What do you mean by my two nodes are all local.
Are you trying to use Related Content within one environment?
Make sure you have an authentication domain set on your webprofile and that your hosts file reflects this.
Make sure there is no proxy or firewall in the way.
Make sure Integration Broker is setup correctly.
Try pinging your server including the authentication domain.
Try looking for log files in the application server and errorLog.html in the Webserv folder.

Order is showing in T code# VKM3, which should not happen.

Client using automatic credit check. Customer maintained credit master data for which system is doing credit check. As per client requirement the future orders created for this customer system should not do a credit check.
For this we have created a new risk category and in the T code #ova8 , unchecked all the settings for this combination of credit control area, risk category and credit group. We maintained the new risk category in the credit master data of that customer, and created a new order and found that the system is not doing any credit check and system is allowing for the billing. However when but this order is showing in T code# VKM3, which should not happen.

Hi- SAP always shows orders in VKM3 even though they do not have credit hold... SAP lists all orders which have item cat deliver or billing relevant..
Reg
Siva

Purchase order printout should not happen without release of PO

I have made all the settings for PO release strategy and printout settings. But printout can be taken even before final release. I checked the settings and this printout should not happen before release. Please help me out.
Thanks in advance.

Hi,
Thank ypu for your reply. PO was not released. Printout wa snot able to be taken in ME9F. But Printout can be taken using Print preview in Tcode ME22N. Can we avoid such printing using Print preview option.
Thank you in advance

HT4972 I have had an iphone 3g and recently had to restore my factory settings, when I have tried to add facebook on again it says that the relevant update of 4.3 is not available, however the 4.3 update is not available for the iphone 3g. how can i solve

I have had an iphone 3g and recently had to restore my factory settings, when I have tried to add facebook on again it says that the relevant update of 4.3 is not available, however the 4.3 update is not available for the iphone 3g. how can i solve this and get facebook back on my phone

You cannot.
Unless you have done as you should and have the old facebook app on your computer.

Update should not happen in the name of WF-BATCH

Similar Messages

Maybe you are looking for