Update SNMP to v3 on WLCs. Update also required on WCS?
Hi all,
I need to update the SNMP version on our WLCs to v3, using MD5 and aes128. This looks easy enough to do:
Management > SNMP > SNMP v3 users > new
From here i can add a new user (ie SNMPV3) and set MD5 and aes128 passwords. I will update our monitoring software to match the SNMP version and credentils, and our monitoring of the WLCs will then run under SNMP v3.
However, we also use a WCS to manage the WLCs (we use templates for wireless key changes etc)
I suspect i will need to update the SNMP details on here too, PER WLC ?
Configure > Controllers > (IP of specific WLC) > Properties > SNMP Properties
Within here i believe i need to add the MATCHING SNMPv3 credentials that i added to the WLC in queston, presumably so the WCS can still talk to the WLC..? Is this correct, or is there more than this that is required?
I also assume that any SNMP update on the WLCs and WCS will NOT impact the APs, because they chat to the WLCs via LWAPP and *not* SNMP...?
Thoughts appreciated,
Thanks in advance!
You are quite correct. You will need to update the v3 user on the WCS per WLC. And yes, it will not affect the AP.
Cheers,
Steve
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.
Similar Messages
-
My ipod touch 4g just updates today on itunes and the update caused more trouble than good for me. My ipod will no longer show me the battery percentage in the top right hand corner and I am not allowed to drag other applications to the bottom panel. Also my itunes doesn't allow "enable disk use" anymore. Can anyone help? My ipod now says that it's the 4.3.4 version
- Unjailbroken iPod never showed % battery. Just the icon.
- Unjailbroken iPod Touches never had a disk mode.
- What happens when you try to drag a wiggling app to a empty space in the bottom? Does it move and snap back? -
Is anybody else still not able to use the App Store? I can't download nor update any apps. I have an IPhone 5 device not currently updated to iOS 7 as my partner also has an iPhone 5 running iOS 7 and it seems to have some issues at the moment.
Hi Tech5Apple,
Thanks for visiting Apple Support Communities.
If you continue to see unexpected behavior when accessing the iTunes Store, the troubleshooting steps in this article can help:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
All the best,
Jeremy -
since I did the update to OS5 I can't update any apps on my iphone4 and also had to make a new account before it would do the update. now it won't let me sign in to my original itunes and tells me the password is wrong and I know it isn't.
I having same problem is there a solution ?
-
When I am trying to upgrade my iOS version I am getting an error message saying " the iPad software update server could not be contacted", I also get an error message prior to that which says the certification of the server is invalid?
Temporarily disable any security software on the computer and try again.
-
My iPad mini retina is still having random reboots with blue screen after updating to iOS 8.0.2.i also did reset my iPad.But the problem still persists
Could you add your problem here: https://discussions.apple.com/thread/6569052? This makes sure the discussion and in one place and we can attract more attention from Apple.
-
after updating my ios 6 to ios 7 also when i open apps like whatsapp r wechat or adobe reader its screen is still vibrating being blurred and fluctuate... i cdnt undrstand why its so and hw to resolv ths.????? pls help me
shillshocked wrote:Since version 1.12, LightDM now relies on systemd-logind for seat
management. It means LightDM van load seats automatically as they are added
from logind.
Ha! I searched something like that during my investigations, I was wondering if it wasn't about the recent logind changes, but I gave up due to the lack of documentation -
I have apps that want to get updated but when i try to update them, the progress bar appears but also dissapeares again, the app isnt updated..
I keep trying but i cant update the apps..First reboot the iPad by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
If that doesn't work then reset the phone by going to settings/general/reset/reset all settings -
I have the first iPad and it will not update to IOS 6. It is also dropping wifi. Any ideas
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
What is correct update or upgrade for Mac OSX v 10.5.8? Also can't use sites without updates on firefox & safari. Auto update shows none available?
Click here.
(89934) -
I updated operating system to OS X Yosemite, also updated pages. Now when I try to open files I am told to update pages
You have both Pages 5.5.2 and your older version of Pages on your Mac .
Pages 5.5.2 ids in your Applications folder.
Pages '08/'09 is in your Applications/iWork folder.
When you double click on a file either version may open, but usually the older, and it can not open files from the newer version.
Right click on the file instead and choose which version to open from.
Peter -
i have purchased a 3gs and its jail broken. i tried to update it and it did get update also but it is not working, and techinal person said it is a locked.now how do i factory unlock it?
It is not always possible to return a jailbroken phone to a pristine state. Jailbroken devices can NOT be discussed here per the terms of service. As for unlocking. It was previously hacked and has re-locked to the original carreir. ONLY the carrier it is locked to can authorize unlocking it. Find out who that is and contact them or do as steve359 advised above and try to return it for your money back.
-
I have an iPod touch, 3rd generation, and when I push the button to put it to sleep, my iPod takes a screen shot. It's really annoying. Is this a result from updating to iOS 4.3.3? Also, my screen is EXTREMELY sensitive—breathe on it and it turns on.
- Are you also having problems with the Home button? Maybe it is sticking a little since to take a screen shot you depress the Home and Power/Sleep buttons at the same time.
- I have not seen your problem discussed here before.
- I would first try resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next would be to restore the iPod via iTunes. First from backup and if problem persists, restore to factory defaults/new iPod. -
i downloaded the latest update ios 7.0.4 and update my iphone 5, but to my surprise i couldnt locate the downloaded file on itunes and i've also checked my itunes folder, still cant see the file. pls anybody who can help.
The downloaded file is probably stored at C:\Users\<User>\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates. In general it is probably best to "download and install" updates than download and then install later. Note that you cannot revert to the older firmware if you don't like the update, even if you have the old .ipsw files.
tt2 -
My iphone nas numerous apps that need updated. My iphone and itunes are current with the latest updates.
When I try to update my apps I get the message" cannot connect ti itunes store". Any help ?Content bought using one Apple ID cannot be merged or transferred to another Apple ID.
All you need to do is delete those apps belonging to your wife.
Check Settings > iTunes & App Store > Apple ID: > your own Apple ID here. If not, sign out here and sign in yours.
Maybe you are looking for
-
How to see the print preview of outgoing excise invoice.
Hi Experts, How to see the print preview of outgoing excise invoice. Thanks, srinivas.
-
What is the price to upgrade to the new CC version? I can't get any information on anything from Adobe. I am so annoyed with their website, I really have lost interest. I don't use the cloud, and only want to use 1 or 2 of their products. The las
-
Set batch management for reasons of cost management item cannot be deleted
Discovery was made that a material should have had batch management MARC-XCHPF selected. Within that time sales orders were created as well as sales order stock. 411E movements were done to get rid of the sales order stock, and it can not be seen i
-
File adapter - connection mode
Hi, RE: File adapter Can someone please supply me with some information: What is the difference between connect mode - permanently/file per transfer? When does the connection get closed? Thanks, Leanne
-
Bapi for release purchase order
Hi Experts Is there any BAPI available to release the Purchae Order. Pls advise me to do the same. regards rajaram