UPDATE SPAM/SAINT TRANSACTION (SAPKD70023)
I am trying to Update SPAM/SAINT transaction in Client 000. The log reports finished with return code 4, but the transaction still runs and the message below is: DD IMPORT finished with retyurn code 4. But it is working, yet.
I am updating the SPAM/SAINT transaction in Solution Manager 4.0 and the kernel release is 7.00 with patch level 83.
Import of the current OCS Queue (02.11.2007, 16:44:06)
The import is continued in phase 'CHECK_REQUIREMENTS'
Import phase 'PROLOGUE' (02.11.2007, 16:44:11)
Import phase 'PROLOGUE' was successfully finished (02.11.2007, 16:44:12)
Import phase 'CHECK_REQUIREMENTS' (02.11.2007, 16:44:12)
Import phase 'CHECK_REQUIREMENTS' was successfully finished (02.11.2007, 16:44:13)
Import phase 'DISASSEMBLE' (02.11.2007, 16:44:13)
Import phase 'DISASSEMBLE' was successfully finished (02.11.2007, 16:44:17)
Import phase 'ADD_TO_BUFFER' (02.11.2007, 16:44:17)
Import phase 'ADD_TO_BUFFER' was successfully finished (02.11.2007, 16:44:18)
Import phase 'MODIFY_BUFFER' (02.11.2007, 16:44:18)
Import phase 'MODIFY_BUFFER' was successfully finished (02.11.2007, 16:44:18)
Import phase 'TEST_IMPORT' (02.11.2007, 16:44:18)
Import phase 'TEST_IMPORT' was successfully finished (02.11.2007, 16:44:23)
Import phase 'IMPORT_OBJECT_LIST' (02.11.2007, 16:44:23)
Import phase 'IMPORT_OBJECT_LIST' was successfully finished (02.11.2007, 16:44:28)
Import phase 'OBJECTS_LOCKED_?' (02.11.2007, 16:44:28)
Import phase 'OBJECTS_LOCKED_?' was successfully finished (02.11.2007, 16:44:28)
Import phase 'SCHEDULE_RDDIMPDP' (02.11.2007, 16:44:28)
Import phase 'SCHEDULE_RDDIMPDP' was successfully finished (02.11.2007, 16:44:28)
Import phase 'IMPORT_PROPER' (02.11.2007, 16:44:28)
The 'IMPORT_PROPER' phase started at 16:44:28 but at now it is still running, at status line stays - "DD Import finished with returncode 4" ...
Can anybody helps to update SPAM/SAINT proper?
Similar Messages
-
Problem updating spam/saint
Hi all,
While updating spam/saint i m getting following error.
- Error in step: CHECK_REQUIREMENTS
- Reason for error: TP_CANNOT_CONNECT_SYSTEM
- Return code: 0212
Any idea how to resolve this. This system is connected to another system in tms , the latter being domain controller. The tp versions in these 2 sys are diff. Can this be the prob..
Any suggestion?
Thanks,
AjithHi,
You didn't say what system you using ? Anyway, go into SM59 and find the RFC connections used for TMS(usually two) under ABAP connections, try do a connection test, is it successful ? ..if not check technical settings are correct.
See note 96907 for further troubleshooting.
Nelis -
How long may it take to update SPAM/SAINT?
Hello,
I'm updating SPAM/SAINT Update - Version 700/0027; it has run for a long time during DDIC Activation. How long may it take for the whole process of update of SPAM/SAINT?
Thanks and regards,
SaidDear Sayid ,
SPAM update generally not took tooo much time , in your case please check the log in
\usr\sap\trans\log for better understanding , there you can track the changes / update / error .
Hope this input help you to track / solve issue .
Regards ,
Santosh -
No DDL commands found for activation while updating SPAM/SAINT
Hi,
Hi,
While updating SPAM/SAINT version 0053 (SAPKD70053) we are getting
error in activation.
If we check the logs we found error related to no ddl command found for
activation
No DDL commands found for activation of /SDF/SWCM_PAT03D
No DDL commands found for activation of /SDF/SWCM_PAT03P
No DDL commands found for activation of /SDF/SWCM_PAT03Q
No DDL commands found for activation of CLNT_CVERS
No DDL commands found for activation of CLNT_CVRS2
No DDL commands found for activation of CVERS_SUB
No DDL commands found for activation of PAD03
No DDL commands found for activation of PAT05
No DDL commands found for activation of PAT06
No DDL commands found for activation of PAT09
No DDL commands found for activation of PAT10B
No DDL commands found for activation of PATPRDVRS
No DDL commands found for activation of PATRTVERS
No DDL commands found for activation of PATSWFEATR
No DDL commands found for activation of PATSWFTINC
No DDL commands found for activation of PRDVERS
No DDL commands found for activation of STACKCOMPS
No DDL commands found for activation of SWFEATURE
No DDL commands found for activation of SWFEATUREINC
No DDL commands found for activation of TECHUSAGES
No DDL commands found for activation of TFDIR_INIM
No DDL commands found for activation of TRBAT3
We try to activate the table but were not able to activate it.It giving message that Table cannot be activated.
Attaching the error log files
System Details:
SAP NetWeaver 2004s
Database: DB2 10.5
Can anyone help us in thisHi Amit,
From the logs you attached
2WETP000 13:44:36: Retcode 1024: error in DDL statement for "CLNT_CVRS2 " - repe
2WETP000 at
2EETP345 13:44:48: Retcode 1024: SQL-error "-601-SQL0601N The name of the object to be created is
2EETP345 identical to the existing name "SAP<SID>.CLNT_CVRS2" of type "VIEW". SQLSTATE=42710" in DDL
2EETP345 statement for "CLNT_CVRS2
Can you check in database for the existence of the object.
Also what is your kernel level ?
Regards,
Deepak Kori -
Updating spam/saint manager
I have a freshly installed SAP ERP 6 system.
1. I can see that most components are on 600 and NW components on 701 release. When I navigate to transaction SPAM, the menu says Support Package Manager version 7.01 / 0033.
However, when I goto the OCS package directory, it shows SAPKD70029 and SAPKD70033.
Should the files not be SAPKD701** as its version 7.01 listed in menu bar ?
2. What is the latest level I can update it to ? Should it be SAPKD70043 or SAPKD70143
3. For downloading the latest package, from sap software download center, how do I know which of the following should I go for ?
SPAM/SAINT UPDATE 620
SPAM/SAINT UPDATE 640
SPAM/SAINT UPDATE 700
SPAM/SAINT UPDATE 701
SPAM/SAINT UPDATE 702
SPAM/SAINT UPDATE 710
SPAM/SAINT UPDATE 711
SPAM/SAINT UPDATE 720
SPAM/SAINT UPDATE 730
SPAM/SAINT UPDATE 800
If its just spam version, why dont we go for SPAM/SAINT Update 800 ?
Thanks,Hi,
As I can see, you have installed EHP4 ready system whose netweaver version is 7.01. So, you should install SPAM update of 701 release i.e. SPAM/SAINT UPDATE 701.
SPAM updated of other release will not work because you need to install SPAM update based on netweaver release.
Thanks
Sunny -
Dear all,
I have 3 SAP servers:prd、dev、qas(new),i want to update the qas's SPAM/SAINT,prd&dev's version is the same as 700/0020、700/0021、700/0024,but i can't find these packages at SAP site now,there are only 0038/0039 packages,if i don't update all 3 servers to 0038/0039,i just want to update to 0020/0021/0024,how should i do?
BTW:i am new about SAP basis,can you tell me how to install SPAM/SAINT?
Thank you in advance.Dear Damon,
Before upgrading the support packages, you need to update the spam in the particular server.
log into the server via 000 client --> Run transaction spam / click on support packages and click on import spam/saint upgrade.
The system will automatically get upgraded to the latest spam version.
Coming to the support packages you need to decide which support packages you need to install in all the Dev/Qa/PRD server.
start applying support packages from dev server download it one server and start applying from one server to the other server.
Regards
Nizam -
Update SPAM/SAINT package for release 7.00 terminated
Hi All,
We have installed solman 4.0 on windows environment. when i tried to import spam/saint update, it got terminated in the phase IMPORT_PROPER.
Also, in SM50 it is showing on workprocess running for long and gets terminated. I also have run SGEN once my installation was over.
0 DIA 4028 Running Yes 649 SAPMS38L 000 DDIC Delete D010INC
can anyone suggest what the problems would be..
Thanks and Regards,
sailesh KHi
I have tried three times. In fact I also restarted SAP System by changing rdisp/max_wp_runtime to 0 as there were lot of short dumps with timeouts.
I notice that currently job RDDGEN0L is running at present.
Also,
1) Dialogue work process running Report SAPMS38L with action Delete on Table D0101NC (User DDIC).
2) BGD Work process Status On Hold Reasn RFC with report SAPLSDDD (User DDIC).
SPAM Status is "MOVE NAMETABS FINISHED WITH RETURN CODE 0". Import logs finished with error code 4.
Regards
Chandu
P.S : FYI I am opening another thread with the same message. -
Importing a SPAM/SAINT Update
Hello,
I am trying to update SPAM/SAINT.
In Transaction SPAM, when I import SPAM/SAINT Update the package SAPKD70139 is proposed for the queue.
I need to import this one SAPKD70042, that already decompressed in EPS/in.
(Both are displaying in OCS overview)
Could anybody help me to find the way deleting a Not imported Package (SAPKD70139) in OCS Packages / SPAM ?
Many Thanks in advance
LatifIssue is solved.
Regards -
I was importing a Support Package update (SPAM/SAINT-Update Version 7.00/0026) by SPAM transaction but it displays me a message saying that there's a previous update at queue which has to be imported first, this update is SPAM/SAINT-Update Version 7.00/0022 but it has error status, I applied note 684564 and reset its status from 'Imported' to 'New', but I didn't backup the file ($DIR_EPS_ROOT/in ) in the server, I tried to dowload it again from the SAP marketplace but isn't available anymore, the name of the object is SAPKD70022.
Is there a different place to download this object or a way to delete it from SPAM queue?In Se37,Use the function module OCS_RESET_QUEUE --- >execute --->IV_TOOL=SPAM, IV_FORCE=X
Deleted all the files from \usr\sap\trans\tmp..
Please make sure thatthere is no TP process
or R3trans process running in the system at Operating system level.
If any process exist, Please kill the process.
Upload the spam/saint package again
Scheduled the program RDDIMPDP using Report RDDNEWPP in se38.
Edited by: Venkatramani Hariharan on Jun 6, 2008 2:15 PM -
Dear All,
while i am updating spam / saint in saint t code I am facing an error TP_INTERFACE_FAILURE and reason for the error is TP_CANNOT_CONNECT_SYSTEM
the error details are
The installation was stopped, since an error occurred during the phase
CHECK_REQUIREMENTS, which the Add-On Installation Tool is unable to
resolve without your input.
After you have corrected the cause of the error, continue with the
import by choosing Continue in the queue display.
The following details help you to analyze the problem:
- Error in phase: CHECK_REQUIREMENTS
- Reason for error: TP_CANNOT_CONNECT_SYSTEM
- Return code:
- Error message: TP_INTERFACE_FAILURE
Notes on phase CHECK_REQUIREMENTS
n this phase the system checks the various requirements for the add
nstallation. The following are reasons why this phase may fail:
TP_CANNOT_CONNECT_TO_SYSTEM: tp cannot log on to the system
database.
Check the action log (in the menu, choose Goto -> Action Log). Y
may be able to use the detailed tp error message in this log to
identify and remove the cause of the error.
QUEUE_NOT_EMPTY: There are still OCS requests in the transport
buffer which are not completed. You can show these requests with
following tp command:
tp SHOWBUFFER <SID> -DSOURCESYSTEMS= TAG=SPAM
These requests have to be completed or deleted from the buffer
before you can continue importing the queue.
o CANNOT_DROPBUFFER: tp cannot delete old, incompletely processed
Support Packages from the tp buffer.
Check the action log (in the menu, choose Goto -> Action Log). You
may be able to use the detailed tp error message in this log to
identify and remove the cause of the error.
The Add-On Installation Tool requires that the Change and Transport
System (CTS) be configured correctly. For more detailed information,
read the online documentation available from Help -> SAP Library ->
mySAP Technology Components -> SAP Web Application Server -> BC Change
and Transport System .
A list of the most important SAP Notes for Online Correction Support
(OCS) is available in SAP Note 97620, which is updated regularly.
please help me, its very important to complete this job i am in a critical position
Thanks
SenthilDear,
Please refer these links,
tp_cannot_connect_system
Problem loading a package in the SAINT transc. (TP_CANNOT_CONNECT_SYSTEM)
Regards,
R.Brahmankar -
Error in Spam / saint update TP_STEP_FAILURE and DDIC_ACTIVATION
Dear All,
While updating spam/ saint update I am facing this error
Details of Error:
The installation was stopped, since an error occurred during the phase
DDIC_ACTIVATION, which the Add-On Installation Tool is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Continue in the queue display.
The following details help you to analyze the problem:
- Error in phase: DDIC_ACTIVATION
- Reason for error: TP_STEP_FAILURE
- Return code: 0008
- Error message: tp step A, return code
0008
Notes on phase DDIC_ACTIVATION
In this phase the system activates the imported Data Dictionary objects.
This phase may terminate for several reasons:
o TP_INTERFACE_FAILURE: The system was unable to call the tp
interface.
o TP_FAILURE: The system was unable to execute the tp program. For
more information, see the SLOG or ALOG log file.
o TP_STEP_FAILURE: The system was unable to perform the tp step DDIC
activation successfully. To see the cause of the problem in the
activation log, choose Logs.
If you import two or more OCS packages in one installation queue,
and activate the Data Dictionary objects in the incorrect sequence,
this can cause errors. In this case, the activation errors disappear
if you repeat the activation run. To do this, choose Continue.
The Add-On Installation Tool requires that the Change and Transport
System (CTS) be configured correctly. For more detailed information,
read the online documentation available from Help -> SAP Library ->
mySAP Technology Components -> SAP Web Application Server -> BC Change
and Transport System .
A list of the most important SAP Notes for Online Correction Support
(OCS) is available in SAP Note 97620, which is updated regularly.
Please help me
Thanks
SenthilHi,
i am having the same problem with SPAM
Error in phase: DDIC_ACTIVATION
Reason for error: TP_STEP_FAILURE
Return code: 0008
Error message: OCS Package SAPKA70012, tp step A, return code
0008
however i dont have the option to continue.. Please help
thanks -
SPAM/SAINT update error patch 23 - 640
Hi:
I´m recieving the following dump when updating SPAM/SAINT patch 23 under 640:
Syntax error in program "SAPLOCS_UI "
Error in ABAP application program.
The current ABAP program "SAPLSPAM" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "SAPLOCS_UI ", the following syntax error occurred
in the Include "LOCS_UIU15 " in line 1:
"Function "OCS_DISPLAY_WITH_USER_BUTTON" not found in Function Library."
In program "SAPLOCS_UI ", the following syntax error occurred:
"Function "OCS_DISPLAY_WITH_USER_BUTTON" not found in Function Library."
Thanks a lot,
ArmentaHii read modification adjustments in this document u will get a clear idea.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCUPGOCSSPAM/BCUPGOCSSPAM.pdf
Award points if useful -
SPAM/SAINT Version Updation Problem
hi,
I have installed ECC 5.0 and i have also updated the Kernel,
but when i go to update the SPAM/SAINT Manager Version it shows that it requires at least 0018 Version of the Support Manager.
Can any body please suggest that what is the process of upgrading the SPAM Manager and if there any downloads required to update the SPAM/SAINT Manager.
It's Urgent.....!
Regards,
Ashish
Edited by: Ashish Chugh on Feb 18, 2008 11:58 PMHi,
You need to download the patch for SPAM/SAINT upgrade.
Http://service.sap.com/patces --> Enty by application group --> Additional components --> SPAM/SAINT update --> SPAM/SAINT update <version>
Download the latest version.
Uncar in /sapmnt/trans at OS level. Go to SPAM and click support package --> import SPAM/SAINT update
Best Regards,
Srividya.R -
SUM - SPAM/SAINT 7.3 Update using SQL2012
Hi,
I installed a SAP NW BW 7.3 in Windows Server 2012 / SQL 2012 and I'm trying to update SPAM/SAINT via SUM, but this errors occurs:
1 ETQ359 RFC Login to: System="BWD", AsHost="atlas" Nr="00", GwHost="atlas", GwService="sapgw00"
2 ETQ232 RFC Login succeeded
4 ETQ010 Date & Time: 20140527175641
1 ETQ233 Calling function module "OCS_API_DELETE_QUEUE" by RFC
1EETQ235 Call of function module "OCS_API_DELETE_QUEUE" by RFC failed (error-status "3")
2EETQ360 RFC of "OCS_API_DELETE_QUEUE" failed:
2EETQ361 code/exception : 3
2EETQ362 key : DBIF_RSQL_SQL_ERROR
2EETQ399 SQL error 515 while accessing table PAT05.
4 ETQ010 Date & Time: 20140527175641
1EETQ399 Last error code set is: RFC error system BWD nr 00 function 'OCS_API_DELETE_QUEUE' failed with code 3 key DBIF_RSQL_SQL_ERROR: SQL error 515 while accessing table PAT05.
1EETQ204 Upgrade phase "SPAMCHK_INI" aborted with severe errors ("20140527175641")
And generate these two short dumps:
1)
Category ABAP Server Resource Shortage
Runtime Errors DBIF_RSQL_SQL_ERROR
Except. CX_SY_OPEN_SQL_DB
Date and Time 27.05.2014 18:32:53
Short text
SQL error 515 while accessing table "PAT05".
What happened?
Database error text: "Cannot insert the value NULL into column
'DDIC_ACT_SUBSET', table 'BWD.bwd.PAT05'; column does not allow nulls. UPDATE
fails."
2)
Category ABAP Server Resource Shortage
Runtime Errors DBIF_RSQL_SQL_ERROR
Except. CX_SY_OPEN_SQL_DB
Date and Time 27.05.2014 18:45:59
Short text
SQL error 515 while accessing table "PATHISTORY".
What happened?
Database error text: "Cannot insert the value NULL into column 'DACT_SUBSET',
table 'BWD.bwd.PATHISTORY'; column does not allow nulls. INSERT fails."
Can anyone help me?
I didn't find any SAP note, or documentation about this problem.
Thanks!
MarcelloHi Reagan,
I read this note, but the solution is to re-install the application.
I will do this in last case.
Thanks! -
To reset SPAM/SAINT update
Hi!
I have started to update SPAM/SAINT (from 26 to 30).
The update is stopping in phase IMPORT_PROPER.
How can I sdelete this patch in tcode SPAM?
I would like to install new kernel patch firstly (from 133 to 159).
Thank you very much!
regards
Thomas G.D'oh!
Maybe you are looking for
-
Want to Replicate Dynmic Tree of HR organization
I need your help. I have one requirement. I want replicate one tree that is shown in Transaction pposa . Details of Requirement. If you go to pposa .You can see Find By option at top. In that on click of Organization Units >> Structure Search it sho
-
Log In to Windows 8 by RDP with Assigned Access User
I've set up a user account called Kiosk that has Google Chrome as it's assigned app and seems to work fine when I log on locally. However, when trying to connect to the machine by RDP with the Kiosk user it logs in and immediately logs out without sh
-
ADD_JOB_EMAIL_NOTIFICATION failed
Hi Oracle expert, I downloaded the job email notification and installed in our existing development DB oracle 10g. The installation was successfully. However when I tried to run the procedure it endup with errors as follows: SQL> exec add_job_email_n
-
Multi-monitor window wont stay put :(
so i have 4 monitors, 3 of which are together and 1 off in another area for other stuff. this is done w 2 standard apple video (Nvivia GT120) cards and a few monitors. the middle one has a higher res than the others but not so much to need the dual d
-
I am half way through a 120 page Keynote presentation and am having trouble reopening my work. I'm receiving the message "Import Error, out of memory" when trying to reopen. I'm new to iMac, and not sure how to solve the problem. Does anyone have