Update SPAM
Hello everyone, I update SPAM (KD70037), the old version is KD70026, in the step current action: SPAM update import , spent about six hours, Not completed,is normal? , The system no error message. SPAM status IS RED.
Its not normal. It should not take more than 5-15 min to update SPAM.
Did you run update statistics before applying SPAM update & also plz check if missing statistics available in you system .Please check with these two points & rectify if any missing statistics are present in DB02old Tcode.
After this your SPAM update will work fine.
Thanks..
Mohit
Similar Messages
-
Dear All,
Since, i was not able to find a forum for basis, i'm using this forum for my query.
I want to update SPAM inmy system.The current version is 9 and i want to update it. I have downloaded the current version sof SPAM, BUT UNFORTUNATELY I don't know how to update SPAM !. Can anyone help me out with a step by step procedure to update SPAM?
Regards.
NaveenHi Naveen,
The procedure on how to update SPAM is described in the Support Package Stack Guide (http://service.sap.com/instguidesNW04). The following procedure is extracted from this guide:
The Support Package Manager (SPAM) imports ABAP Support Packages into an ABAP system.
Before using Support Package Manager, see SAP Note 672651.
We recommend that you always use the latest version of Support Package Manager. You can get it at SAP Service Marketplace http://service.sap.com/spmanager --> Download SPAM/SAINT Update.
To import Support Packages, proceed as follows:
1. Log on to SAP Web AS with client 000.
2. Start the Support Package Manager by choosing SAP Menu --> Tools --> Maintenance --> Support Package Manager or use the transaction code SPAM.
3. Load relevant Support Packages.
4. Define a Support Package queue.
5. Import the defined Support Package queue.
Kind regards,
René van Es -
UPDATE SPAM/SAINT TRANSACTION (SAPKD70023)
I am trying to Update SPAM/SAINT transaction in Client 000. The log reports finished with return code 4, but the transaction still runs and the message below is: DD IMPORT finished with retyurn code 4. But it is working, yet.
I am updating the SPAM/SAINT transaction in Solution Manager 4.0 and the kernel release is 7.00 with patch level 83.Import of the current OCS Queue (02.11.2007, 16:44:06)
The import is continued in phase 'CHECK_REQUIREMENTS'
Import phase 'PROLOGUE' (02.11.2007, 16:44:11)
Import phase 'PROLOGUE' was successfully finished (02.11.2007, 16:44:12)
Import phase 'CHECK_REQUIREMENTS' (02.11.2007, 16:44:12)
Import phase 'CHECK_REQUIREMENTS' was successfully finished (02.11.2007, 16:44:13)
Import phase 'DISASSEMBLE' (02.11.2007, 16:44:13)
Import phase 'DISASSEMBLE' was successfully finished (02.11.2007, 16:44:17)
Import phase 'ADD_TO_BUFFER' (02.11.2007, 16:44:17)
Import phase 'ADD_TO_BUFFER' was successfully finished (02.11.2007, 16:44:18)
Import phase 'MODIFY_BUFFER' (02.11.2007, 16:44:18)
Import phase 'MODIFY_BUFFER' was successfully finished (02.11.2007, 16:44:18)
Import phase 'TEST_IMPORT' (02.11.2007, 16:44:18)
Import phase 'TEST_IMPORT' was successfully finished (02.11.2007, 16:44:23)
Import phase 'IMPORT_OBJECT_LIST' (02.11.2007, 16:44:23)
Import phase 'IMPORT_OBJECT_LIST' was successfully finished (02.11.2007, 16:44:28)
Import phase 'OBJECTS_LOCKED_?' (02.11.2007, 16:44:28)
Import phase 'OBJECTS_LOCKED_?' was successfully finished (02.11.2007, 16:44:28)
Import phase 'SCHEDULE_RDDIMPDP' (02.11.2007, 16:44:28)
Import phase 'SCHEDULE_RDDIMPDP' was successfully finished (02.11.2007, 16:44:28)
Import phase 'IMPORT_PROPER' (02.11.2007, 16:44:28)
The 'IMPORT_PROPER' phase started at 16:44:28 but at now it is still running, at status line stays - "DD Import finished with returncode 4" ...
Can anybody helps to update SPAM/SAINT proper? -
Problem updating spam/saint
Hi all,
While updating spam/saint i m getting following error.
- Error in step: CHECK_REQUIREMENTS
- Reason for error: TP_CANNOT_CONNECT_SYSTEM
- Return code: 0212
Any idea how to resolve this. This system is connected to another system in tms , the latter being domain controller. The tp versions in these 2 sys are diff. Can this be the prob..
Any suggestion?
Thanks,
AjithHi,
You didn't say what system you using ? Anyway, go into SM59 and find the RFC connections used for TMS(usually two) under ABAP connections, try do a connection test, is it successful ? ..if not check technical settings are correct.
See note 96907 for further troubleshooting.
Nelis -
How long may it take to update SPAM/SAINT?
Hello,
I'm updating SPAM/SAINT Update - Version 700/0027; it has run for a long time during DDIC Activation. How long may it take for the whole process of update of SPAM/SAINT?
Thanks and regards,
SaidDear Sayid ,
SPAM update generally not took tooo much time , in your case please check the log in
\usr\sap\trans\log for better understanding , there you can track the changes / update / error .
Hope this input help you to track / solve issue .
Regards ,
Santosh -
Updating SPAM : Warning , No Response
While Updating SPAM on my IDES SAP ECC 6.0 server , i got this error log and the update process doesn't respond at "DD IMPORT finished with returncode 4" . Here is the error log file .
Sat Oct 20 00:56:08 2007
Trace File of External Event Raiser (Level=2, Append=0)
EventID: SAP_TRIGGER_RDDIMPDP
SAP message server host: sdisvr36
SAP message server service (new): 3900
SAP message server service (old): sapmsS36
MsIAttachEx: connect to sdisvr36 / 3900
NiIInit: allocated nitab (2048 at 00EDB080)
NiHsLInit: alloc host/serv bufs (100/100 entries)
NiPGetNodeAddrList: got 1 interface(s) from operating system
[0] IP-Address: 192.168.1.36
NiHsLGetNodeAddr: got hostname 'sdisvr36' from operation system
HN='sdisvr36'; Add[0]=192.168.1.36
NiIGetNodeAddr: hostname 'sdisvr36' = addr 192.168.1.36
NiIGetServNo: servicename '3900' = port 0F.3C/3900
NiICreateHandle: hdl 0 state NI_INITIAL
NiIInitSocket: set default settings for new hdl 0 / sock 3948 (I4; ST)
NiIBlockMode: set blockmode for hdl 0 FALSE
NiITraceByteOrder: CPU byte order: little endian, reverse network, low val .. high val
NiIConnectSocket: hdl 0 is connecting to 192.168.1.36:3900 (timeout=5000)
Sat Oct 20 00:56:09 2007
SiPeekPendConn: connection of sock 3948 broke (10061-WSAECONNREFUSED: Connection refused)
NiHsLGetHostName: found address 192.168.1.36 in cache
NiIGetHostName: addr 192.168.1.36 = hostname 'sdisvr36'
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2764]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 3948
(SI_ECONN_REFUSE; I4; ST; 192.168.1.36:3900) [nixxi.cpp 2764]
NiICloseHandle: closing initial hdl 0
ERROR => MsIAttachEx: NiBufConnect to sdisvr36/3900 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
ERROR ***: MsAttach (host=sdisvr36, serv=3900), rc = -100
MsIAttachEx: connect to sdisvr36 / sapmsS36
NiHsLGetNodeAddr: found hostname 'sdisvr36' in cache
NiIGetNodeAddr: hostname 'sdisvr36' = addr 192.168.1.36
NiHsLGetServNo: got service name 'sapmsS36' from operation system
SN='sapmsS36'; Port=0E.10/3600; PC=tcp
NiIGetServNo: servicename 'sapmsS36' = port 0E.10/3600
NiICreateHandle: hdl 0 state NI_INITIAL
NiIInitSocket: set default settings for new hdl 0 / sock 3948 (I4; ST)
NiIBlockMode: set blockmode for hdl 0 FALSE
NiIConnectSocket: hdl 0 is connecting to 192.168.1.36:3600 (timeout=5000)
Sat Oct 20 00:56:10 2007
SiPeekPendConn: connection of sock 3948 broke (10061-WSAECONNREFUSED: Connection refused)
NiHsLGetHostName: found address 192.168.1.36 in cacheReturn code 4 is a warning so you should be able to proceed. Did you restart the SPAM import process (just re-run transaction SPAM and restart the import from the menu)? Having to restart the SPAM import is fairly common.
Hope that helps.
J. Haynes
Message was edited by:
Joe Haynes -
No DDL commands found for activation while updating SPAM/SAINT
Hi,
Hi,
While updating SPAM/SAINT version 0053 (SAPKD70053) we are getting
error in activation.
If we check the logs we found error related to no ddl command found for
activation
No DDL commands found for activation of /SDF/SWCM_PAT03D
No DDL commands found for activation of /SDF/SWCM_PAT03P
No DDL commands found for activation of /SDF/SWCM_PAT03Q
No DDL commands found for activation of CLNT_CVERS
No DDL commands found for activation of CLNT_CVRS2
No DDL commands found for activation of CVERS_SUB
No DDL commands found for activation of PAD03
No DDL commands found for activation of PAT05
No DDL commands found for activation of PAT06
No DDL commands found for activation of PAT09
No DDL commands found for activation of PAT10B
No DDL commands found for activation of PATPRDVRS
No DDL commands found for activation of PATRTVERS
No DDL commands found for activation of PATSWFEATR
No DDL commands found for activation of PATSWFTINC
No DDL commands found for activation of PRDVERS
No DDL commands found for activation of STACKCOMPS
No DDL commands found for activation of SWFEATURE
No DDL commands found for activation of SWFEATUREINC
No DDL commands found for activation of TECHUSAGES
No DDL commands found for activation of TFDIR_INIM
No DDL commands found for activation of TRBAT3
We try to activate the table but were not able to activate it.It giving message that Table cannot be activated.
Attaching the error log files
System Details:
SAP NetWeaver 2004s
Database: DB2 10.5
Can anyone help us in thisHi Amit,
From the logs you attached
2WETP000 13:44:36: Retcode 1024: error in DDL statement for "CLNT_CVRS2 " - repe
2WETP000 at
2EETP345 13:44:48: Retcode 1024: SQL-error "-601-SQL0601N The name of the object to be created is
2EETP345 identical to the existing name "SAP<SID>.CLNT_CVRS2" of type "VIEW". SQLSTATE=42710" in DDL
2EETP345 statement for "CLNT_CVRS2
Can you check in database for the existence of the object.
Also what is your kernel level ?
Regards,
Deepak Kori -
Hi,
Updating SPAM to patch SAPKD64036 I get the error message:
Retcode 1: error in DDL statement for VE071LOCKFLAG - repeat
Error 1031-ORA-01031: insufficient privileges when executing ADD-FIELD of
Error VE071LOCKFLAG when executing ADD-FIELD of
(dummy, do not translate)
No DDL commands found for activation of VE071LOCKFLAG
Any idea?
Regards.Hi,
Please let us know which version of oracle you are running. Assuming it
is 10, please review the following notes :
- 1028220 - ORA-01031: Insufficient privileges despite SAPCONN role
- 985607 - ORA-01031 Creating views after upgrade to Oracle 10g;
It is probable that the database user does not have required privileges.
After executing SAPCONN_ROLE.SQL, restart the SAP system. Otherwise, the
connected WP still will use the old authorizations.
After you try the above, continue the SPAM import again.
Aidan -
Hi,
I am getting the error TP_CANNOT_CONNECT_SYSTEM while doing SPAM Update in CRM 7.0. My kernel patch level is 55.
Even i have upgraded with latest tp and r3trans.
Please suggest me the solution.
Regards
KarunakarHi Karunaker, Did you tried re-importing SPAM version again from SPAM transaction.
Try <Import SPAM/SAINT update> again and let us know if you still face the same error then as said by Sourabh.
Please paste the SLOG and ALOG files log to have further analysis on it.
Hope it helps.
Regards, Amber S | ITL
Edited by: Amber S on Mar 5, 2010 1:13 AM -
Updating spam/saint manager
I have a freshly installed SAP ERP 6 system.
1. I can see that most components are on 600 and NW components on 701 release. When I navigate to transaction SPAM, the menu says Support Package Manager version 7.01 / 0033.
However, when I goto the OCS package directory, it shows SAPKD70029 and SAPKD70033.
Should the files not be SAPKD701** as its version 7.01 listed in menu bar ?
2. What is the latest level I can update it to ? Should it be SAPKD70043 or SAPKD70143
3. For downloading the latest package, from sap software download center, how do I know which of the following should I go for ?
SPAM/SAINT UPDATE 620
SPAM/SAINT UPDATE 640
SPAM/SAINT UPDATE 700
SPAM/SAINT UPDATE 701
SPAM/SAINT UPDATE 702
SPAM/SAINT UPDATE 710
SPAM/SAINT UPDATE 711
SPAM/SAINT UPDATE 720
SPAM/SAINT UPDATE 730
SPAM/SAINT UPDATE 800
If its just spam version, why dont we go for SPAM/SAINT Update 800 ?
Thanks,Hi,
As I can see, you have installed EHP4 ready system whose netweaver version is 7.01. So, you should install SPAM update of 701 release i.e. SPAM/SAINT UPDATE 701.
SPAM updated of other release will not work because you need to install SPAM update based on netweaver release.
Thanks
Sunny -
Update SPAM/SAINT package for release 7.00 terminated
Hi All,
We have installed solman 4.0 on windows environment. when i tried to import spam/saint update, it got terminated in the phase IMPORT_PROPER.
Also, in SM50 it is showing on workprocess running for long and gets terminated. I also have run SGEN once my installation was over.
0 DIA 4028 Running Yes 649 SAPMS38L 000 DDIC Delete D010INC
can anyone suggest what the problems would be..
Thanks and Regards,
sailesh KHi
I have tried three times. In fact I also restarted SAP System by changing rdisp/max_wp_runtime to 0 as there were lot of short dumps with timeouts.
I notice that currently job RDDGEN0L is running at present.
Also,
1) Dialogue work process running Report SAPMS38L with action Delete on Table D0101NC (User DDIC).
2) BGD Work process Status On Hold Reasn RFC with report SAPLSDDD (User DDIC).
SPAM Status is "MOVE NAMETABS FINISHED WITH RETURN CODE 0". Import logs finished with error code 4.
Regards
Chandu
P.S : FYI I am opening another thread with the same message. -
Dear all,
I have 3 SAP servers:prd、dev、qas(new),i want to update the qas's SPAM/SAINT,prd&dev's version is the same as 700/0020、700/0021、700/0024,but i can't find these packages at SAP site now,there are only 0038/0039 packages,if i don't update all 3 servers to 0038/0039,i just want to update to 0020/0021/0024,how should i do?
BTW:i am new about SAP basis,can you tell me how to install SPAM/SAINT?
Thank you in advance.Dear Damon,
Before upgrading the support packages, you need to update the spam in the particular server.
log into the server via 000 client --> Run transaction spam / click on support packages and click on import spam/saint upgrade.
The system will automatically get upgraded to the latest spam version.
Coming to the support packages you need to decide which support packages you need to install in all the Dev/Qa/PRD server.
start applying support packages from dev server download it one server and start applying from one server to the other server.
Regards
Nizam -
Latest iTunes update spams my console messages with this: Failed to create replacement string
iTunes seems to work, but I keep getting this message when I open and close the program. Any ideas as to why?
I get the same message. Anyone have a fix for this yet? Just installed iTunes update today, 9/20, and console is spammed with hundreds of these messages - Failed to create replacement string".
MBA mid 2012. on latest Mavericks, have not installed iOS8 on anything yet. -
Hi everyone
While i was upgrading the SPAM 23 - 26 it is getting struck @ stage
TBATG CREATIONG OF ENQUE OBJECTS
It is running for more that 18 hours.
Can any one help on this.
Thank you
KiranKumarHi
We found a Solution .We have implemented SAPNOTES 1132422 and 1138351 which solved our problem.This is very Typical problem while applying SAPM SP26.
Regards -
Dear All,
while i am updating spam / saint in saint t code I am facing an error TP_INTERFACE_FAILURE and reason for the error is TP_CANNOT_CONNECT_SYSTEM
the error details are
The installation was stopped, since an error occurred during the phase
CHECK_REQUIREMENTS, which the Add-On Installation Tool is unable to
resolve without your input.
After you have corrected the cause of the error, continue with the
import by choosing Continue in the queue display.
The following details help you to analyze the problem:
- Error in phase: CHECK_REQUIREMENTS
- Reason for error: TP_CANNOT_CONNECT_SYSTEM
- Return code:
- Error message: TP_INTERFACE_FAILURE
Notes on phase CHECK_REQUIREMENTS
n this phase the system checks the various requirements for the add
nstallation. The following are reasons why this phase may fail:
TP_CANNOT_CONNECT_TO_SYSTEM: tp cannot log on to the system
database.
Check the action log (in the menu, choose Goto -> Action Log). Y
may be able to use the detailed tp error message in this log to
identify and remove the cause of the error.
QUEUE_NOT_EMPTY: There are still OCS requests in the transport
buffer which are not completed. You can show these requests with
following tp command:
tp SHOWBUFFER <SID> -DSOURCESYSTEMS= TAG=SPAM
These requests have to be completed or deleted from the buffer
before you can continue importing the queue.
o CANNOT_DROPBUFFER: tp cannot delete old, incompletely processed
Support Packages from the tp buffer.
Check the action log (in the menu, choose Goto -> Action Log). You
may be able to use the detailed tp error message in this log to
identify and remove the cause of the error.
The Add-On Installation Tool requires that the Change and Transport
System (CTS) be configured correctly. For more detailed information,
read the online documentation available from Help -> SAP Library ->
mySAP Technology Components -> SAP Web Application Server -> BC Change
and Transport System .
A list of the most important SAP Notes for Online Correction Support
(OCS) is available in SAP Note 97620, which is updated regularly.
please help me, its very important to complete this job i am in a critical position
Thanks
SenthilDear,
Please refer these links,
tp_cannot_connect_system
Problem loading a package in the SAINT transc. (TP_CANNOT_CONNECT_SYSTEM)
Regards,
R.Brahmankar
Maybe you are looking for
-
It's possible to open an Flash Lite movie locally from the browser
Hi there, I'm trying to open an swf movie (Flash Lite) in the Nokia s603rd Browser like this "file:///e:\documents\movie.swf" and it gives a msg error "Web memory full. Close some applications and try again". I open an html file in the same way and w
-
App won't install with the prerequisite SAP Crystal Reports Runtime Engine
On installing with the following prerequisite checked: SAP Crystal Reports Runtime Engine for .NET Framework 4.0 .. received this error: Crystal Reports for .NET Framework 4.0\CRRuntime_32bit_13_0.msi has changed since it was initially published
-
Saving Drafts on IMAP account that's forced to use SMTP outbound server
Hi! Occasionally, I'll get messages from OSX Mail telling me that it can't save a copy of a draft on an IMAP address, and when I send said message, it never shows up in my sent items folder. Due to limitations with my ISP, I cannot use the IMAP outbo
-
Extract CDATA section from a KML file
Hi all, I have a kml file as shown below. I need to extract the path of all the files listed under the Images section and as well under the Links section. Can i get some hwlp... currentl am able to retrieve the cdata text content as a string and henc
-
Geturl to open at specific page width
how do I get the new window (mytestpages.html) to open to a specific width (600pixels). This is the script i have now and it works just fine but the page is full screen: on (release) { getURL("mytestpages.html", "_blank"); Thanks in advance