Update SPS4 to SPS10 For Solman 7.1 with SUM Problem

Hello,
I am trying to update SOLMAN 7.1 SPS4 to SPS10.
I launched SUM, I have put the files Stacks ABAP & JAVA in /usr/sap/trans/EPS/in
I put the SUM directory in /usr/sap/SID with 60GB of size
Now I am faced with this error:
An error has occurred during the execution of the Validate queue step with action configure. Service com.sap.sdt.jspm.service.JspmService failed with the following message:
Checking of deployment queue completed with error.
You can find more information in the files /usr/sap/SID/SUM/sdt/log/SUM/VALIDATE-QUEUE_03.LOG and ProcessOverview.html.
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
SUM,configure,create-queue,validate-queue,com.sap.sdt.jspm.service.JspmService,class com.sap.sdt.jspm.service.JspmServiceException
VALIDATE-QUEUE_03.LOG








Apr 8, 2014 3:04:10 PM [Info ]: Validating Java development components...
Apr 8, 2014 3:04:22 PM [Error ]: The following problem has occurred during step execution: com.sap.sdt.jspm.service.JspmServic
eException: Checking of deployment queue completed with error.
java.lang.NullPointerException: while trying to invoke the method com.sap.sdm.repo.Sdu.getComponent() of an object loaded from
local variable 'sdu'
I need your help
Many Thanks

Hi
Could you refer the SAP Note
1938098 - SUM tool fails with error java.lang.NullPointerException during VALIDATE-QUEUE
1761799 - Software update manager failed during deployment
Could you paste or attach the DEPLOY-COMPONENTS*.log
Regards
Sriram

Similar Messages

What is the best way to export and import updates between WSUS servers for specific KB's with environments that have different data sets?

We are under strict regulations and monitoring at my company. Because of this, we have to define what updates are being installed during a patch cycle by KB Article. Two production networks and one test network. The installed updates have to be the exact
same in the test environment, run for a few days with no problems, and then we install them in our production networks. The issue is, not all of the software in the environments is identical.
I need to figure out a way to take failed/needed updates from production that are unapproved, export that list so I can approve all of those updates in the test env.. Then once I approve those and any other needed updates in test, I need to be able to export
all approved updates from the test env (which includes the needed ones from production) and import those approvals in production.
How can this be done?
Thanks!

the easiest way will be to use a single wsus infrastructre for all your environments.
Tis blog article explains how to duplicate the approvals over groups:
https://thwack.solarwinds.com/community/application-and-server_tht/patchzone/blog/2013/08/06/duplicating-approvals-from-a-test-group-to-a-production-group
MCP/MCSA/MCTS/MCITP

2 days ago my FF3.6.3 started becoming extremely slow/delayed on EVERYTHING/ALL ACTIONS (I have been using 3.6.3 for a few months with NO problems, until 2 days ago). Scrolling going in delayed/slow 'waves' motion (not smooth & fast), Right-click box ver

2 days ago my FF3.6.3 started becoming extremely slow/delayed on EVERYTHING/ALL ACTIONS (I have been using 3.6.3 for a few months with NO problems, until 2 days ago). Scrolling going in delayed/slow/jerky 'waves' motion (not smooth & fast), Right-click box very delayed/hangs in coming up, Text typing lagging/intermittent, activity extremely slow/delayed when pointing mouse over anything, changing from tab to tap extremely slow. Bascially EVERYTHING has become sooo slow, delayed, lagging etc. I have tried ALL possible checks (extensions, add-ons, plug-ins, download history, cache, cookies) & viewed nearly ALL the FF help sites. Is this a sudden/recent bug?? It doesnt only happen with Facebook, but EVERY window I open!!
== This happened ==
Every time Firefox opened
== approx. 2 days ago

I've personally not seen this behaviour since Firefox version 2. It however re-appeared for me in 3.6.6 and 3.6.7 (current) and it's bloody awful. Makes everything I do take 50% longer ..... great for efficiency in the modern world.
This 3.6 branch is so riddle with flaws which seem never to be fixed. Each fix / update brings with it more problems ... worst of all I see version 4 is already in development but they cannot even get 3.6 right ??? WTF ????
Mozilla must stop chasing version numbers as has become the trend in the software world. Fix an existing version to perfection then start working on a new branch of the product.

HT1452 I have a Toshiba Canvio 1TB external hard drive on my Mac. I've used it for 4-5 months with no problems, but now cannot add to it (I use it mostly for photo storage) to it. I can still access information previously added. Ideas?

I have a Toshiba Canvio 1TB external hard drive on my Mac. I've used it for 4-5 months with no problems, but now cannot add to it (I use it mostly for photo storage) to it. I can still access information previously added. Ideas?

I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots. Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
See Pondini's page for more explanation: What are Local Snapshots? http://pondini.org/TM/FAQ.html
I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
You have tested the library on the external drive, and so your photos are save there.
The local TimeMachine snapshot probably now contains a backup of the moved library. Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots.

I have Lookout 6.5 running with Windows 7, the process has been running for about 2 months with no problems, but today the Citadel stopped working! I am having a hard time getting it started again, need help!

I have Lookout 6.5 running with Windows 7, the process has been running for about 2 months with no problems, but today the Citadel stopped working!
How could this have happened and what can I do to get it running again?

Didnt realize there was a response, late getting back to you.
Save your process files outside of the NI progam directory (you should have external backups already right ). THey should not be deleted.
Any customizations to the lookout.ini and lookout.sec file may be lost.
Mike
Forshock - Consult.Develop.Solve.

My iphone is getting hot and draining the battery, it just started yesterday, I've had it for over a year with no problems

My iphone is getting hot and draining the battery. This started yesterday, I've had the phone for over a year with no problems,

Delete and re-download the Dropbox app. You will have to sign in again and adjust app settings.

Installation of Photoshop update 13.1.2 for creative cloud fails with error code U44M1P7 I need help

I need help installing update 13.1.2 for Photoshop creative cloud, installation fails with error code: U44M1P7. Could someone please help?

Sorry to bother you.
I could find the answer after searching previous posts about this language problem.
Had to change my language in AAM profile and then download PS CS6 again ( english version ).
Then open the actual Photoshop and in preferences > interface you can besides the Dutch also option for English.
restart application and Voila.
Greetz, Jeroen

Why did my calendar view suddenly change? Using iOS 7.1 and I've been using this version for a few weeks with no problem with my calendar. Now the view has changed and I can't view a list mode without seeing the month too

Why did my calendar view suddenly change in iCal? I've been using ios7 fôr a few weeks now with no problems. Suddenly, without any updates or anything, the calendar view changed and I can no longer view it as a list without having the entire month seen as well.

Hey Gattypyle,
Thanks for the question. You simply need to go back to Day/Week view, then tap the list-view icon once more.
Calendar at a glance - iPhone
http://help.apple.com/iphone/7/#/iph3d110f84
View a list of events. In month view, tap to see a day’s events. In day view, Tap the to view a list of events.
Thanks,
Matt M.

Trying to update from OS X 10.6.8 operating with zero problems to 10.9.2. Install over current OS results in inability to cold boot to mavericks. Must use option key to select 10.9.2 volume to boot to.

Will boot from cold start sometimes but eventually will not boot at all. Just white screen. Have tried safe boot and cleaning out folders suggested by Apple care advisor. This helps temporarily. But white screen issue returns. Have removed all periferals problem persists. Have tried reseting Pram. This results in the Mac booting up into 10.6.8. ( I keep a backup clone on a different internal physical drive.) I've tried a clean install using migration assistant to bring over all my stuff. This results in a permissions mess that disk utility cannot fix.) I've tried migrating my data from snow leopard during the install process. Same permissions mess. Snow leopard works great but I'm concerned about lack of support with security updates going forward. I have three macs in the family. Have been a mac user since 2002. Paid the premium because Macs just WORK and I've not had to mess with them to stay alive. Mavericks has changed all that. I want to get past this and go back to just using my Mac. Open to help please. Two other things. In all instances of trying to use Mavericks I cannot get finder to retain my preference settings. They always return to default when I reboot. Microsoft Entourage always opens with a new email draft now instead of just opening to the inbox like under Snow Leopard when started from the dock. When started from applications Entourage opens to the inbox normally. Thanks

Here is how I solved this issue on my early 2008 Mac Pro- Formatted and zeroed my boot drive. Disconnected all periferals except monitor (Dell DVI), wired mac keyboard, Logitech wireless usb 2 mouse. Removed my ATI 5770 upgrade Video card and replaced with original Nvidia card. Did clean 10.9 install. Immediately updated to 10.9.2. Checked finder preference retention issues- Gone. Checked reboot and boot after PRAM reset issue. Still boots back to 10.6.8. Hmmmm though about how the order of my physical drives in the bays was now different than before 10.9. Previously 10.6 startup was in bay 3 and my 10.6 clones were in bay 4. Never had a clone boot on startup. Now 10.6 is in bay 2 and 10.9 is in bay 3. Does the mac start looking for a boot volume in bay 1 then 2,3,4. Answer- Yes! When I moved the 10.9 drive to bay 1 kept 10.6 in bay 2 the crazy start up switch no longer occurs. So, I used the system like that for a couple of days rebuilding my files and reinstalling applications. Then I pulled the nVidia card and put the ATi 5770 back in. All is well. The system works perfectly no more issues. This has been a lot of work and I can't tell what the specifict conflict was, but I'm up and running Mavericks with no problems. All my hardware is back as it was before. All periferals working fine. Glad I am still able to make use of my ATi video card because it is superior. Hope this helps others use mavericks on their older Macs.

HT201210 In the attempt of updating the latest itune software, i am faced with the problem of not being able to be connected to itunes with my ipod touch that is blocked living the USB cable and the itune icons on my touch sceen. Can some one help me out

In the attempt of updating my ipod touch, i am faced with the problem of not being able to be connected to the itunes in my computer (windows xp ) because my ipod touch got blocked up, leaving the icon of USB cable and itunes on my touch screen. I am asked to restore my ipod first, but i have tried using all the examples stated and still can't help. Please please, can some one help me out ? Ones in the process of trying, i see an error code: 1656 and most of the time nothing. Thanks

See if placing the iPod in Recovery mode will allow a restore via iTunes
Next try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can also try another computer to help determine if you have a computer or iPod problem.

I have been using Firefox for over 10 years with minimal problems, but recently (within the past 2 months) something has changed and I cannot get any sound to play, even on previous web sites that did work. I'll just have to go back to IE!

Windows XP, Firefox 3.6.13 version, I am thinking it would be better to back up to a previous version of Firefox that did work! What was the latest version as of October 2010?

Thanks to some hints in several strings, I went back to the Control Panel in XP, clicked on Sounds and Devices, clicked on Audio, then changed the default device to the Realtek HD Audio output I have on my computer. Now I can hear You Tube video sound and other Internet audio fine, at least for now. I will come back if it stops again. Thanks to all who posted.

For all of those with DM problems

I have read quite a few of threads where people describe problems they are having...I know it can be frustrating. So let me make some general comments:
1. RIM is not involved with this site as far as support goes (TMK), just a bunch of users
2. Mac users are used to things going fairly smoothly with new software installation...
3. RIM is a direct competitor of Mac (iPhone...LOL)
4. Diagnosing a software issue can be difficult (especially when no information is supplied regarding Mac system, Mac OS, Device, Device OS, and what other software did you or do you have installed)...
5. My first recommendation is to reinstall the DM software following this thread:
http://supportforums.blackberry.com/t5/BlackBerry-for-Mac/Proper-DM-Install/td-p/381491
6. The thread that is a sticky at the top by FozyBear is also great:
http://supportforums.blackberry.com/t5/BlackBerry-for-Mac/Mac-version-of-BlackBerry-Desktop-Manager-...
7. Do not expect perfect one-to-one sync of contacts, calendar events and notes. The field maps are different...remember they are competing software platforms. You may have to "clean up" either your device or iCal/Address Book BEFORE you sync...and always archive.
8. If it fails the first thing to do is delete the blackberrydesktop folder from user/username/library/application support restart, repair permissions, clear cache and try again.
4.6.1.305 hybrid
Mac Pro 2X2.8 Quad SL

HI Jeff,
Try posting in the Developer Forum here. http://discussions.apple.com/forum.jspa?forumID=727
Carolyn

Error while updating SP's for Solman

Hello ,
I am updating the SP's for Solman. and I have come across these 3 errors, how do I resolve them
1.Function RSDDTREX_INDEX_CHECK (RSDDTREX_CHECK     01) does not fit into the existing function group ((RSDDTREX     06))
2.Table RSBGUI_R_TEST is not in nametab.
3.     Phase ADDON_CONFLICTS_?: Explanation of Errors
     Conflicts were found between the Support Packages that you want to
     import and the Add-Ons installed in the system. To guarantee the
     consistency of your system, the import is interrupted until all Conflict
     Resolution Transports (CRTs) for the listed Support Packages are
     included in the queue.
     To include the CRTs in the queue, proceed as follows:
     #NAME?
     - Leave this screen by choosing 'Cancel' (F12).
     #NAME?
       Service Marketplace or request them from your Add-On supplier.
     #NAME?
     #NAME?
       the beginning.
     If the problem involves an SAP Add-On, see SAP Note 53902, which tells
     you which CRTs resolve the conflicts. Otherwise contact the supplier of
     your Add-On for details on how to proceed.
     The following contains a table of Support Packages for each Add-On for
     which conflicts were detected. The column 'Information on the Conflict
     Resolution' specifies how you can resolve a conflict. For more
     information, select the corresponding 'Information for the Conflict
     Resolution'.
     Note:
     You are importing the queue in the test scenario. As this scenario is
     only used for performing analyses, you can skip the errors and continue
     the import in the next phase.
     In the standard scenario, however, note that the errors have to be
     rectified before importing can be continued in the next phase.
     Conflicts Between Add-On ST-SER 700_2006_1 and Support Packages
     Component     Release     Support Package     Information onConflict Resolution
     ST     400     SAPKITL425     CRT: DUMMY
Thanks Druva

Hi there,
Thank you cauz I did get some lead into the issue with your response.
I missed on some ST's which did give me a CRT error and I downloaded them and the problem is fixed now.
I have another question in my new post please have a look at it.
I am closing this thread.
Thank you
Druva

Please update the functional specifications for Vendor Balance Report

Dear All,
Please update the functional specifications for Vendor Balance Report with
proper descriptions.
Please include
1. How your selection screen should look like..
2. Output format ( in an excel sheet)
3. Logic for every field in the output format (viz. .. how do link the
vendors from the selection screen to the BKPf and BSEG tables, how do you
find open and closed items in BSEG , etc.)
Please avoid statements like 'The total value of all the break-up should
tally with the balance as shown in FBL1N for a given vendor for the given
day.'
You need to give the logic for the FBL1N, in that case.
Regards
Rama Mohan

Hello again,
Regarding having them update the specs, one can dream. Dreams are free. LOL. Hopefully the memory makers will update their specs as more makers start supporting a large memory configuration.
The 4GB sticks I am using are http://shop.kingston.com/partsinfo.asp?ktcpartno=KTL-TP667/4G
I did not do an extended test of the sticks in my MBP. Their home is in the ThinkPad I have because it is running Windows Server 2008 with Hyper-V.
As you can see from the link above, these little suckers are pricey. But consider the price of 2GB SoDIMMs were $950 when they entered the market a couple of years ago. The price will drop.
I asked the Kingston rep that sent these to me if online sites like newegg.com would have them soon. She indicated no, but the corporate buying sites like CDW and Zone would. So check around. They just started shipped a couple of weeks ago so be patient.
If you have any other questions, please stop by http://blogs.technet.com/keithcombs/archive/2008/07/05/testing-my-apple-macbook- pro-with-8gb-of-ram.aspx and ask there. I'll see them much more quickly.
Cheers,
Keith Combs
Microsoft

Have used Firefox for over a year with no issues now can't access certain games......all else works, and the games can be accessed using Chrome and IE have run malware and still nothing

So I have used Mozilla for a long time with no problems. All of a sudden I cannot access certain games on facebook. All else works. First uninstalled and reinstalled. Then ran malware program. Still nothing and the games work off IE and Google Chrome. I really like Firefox and would like to be able to go back to it

So I have used Mozilla for a long time with no problems. All of a sudden I cannot access certain games on facebook. All else works. First uninstalled and reinstalled. Then ran malware program. Still nothing and the games work off IE and Google Chrome. I really like Firefox and would like to be able to go back to it

Update SPS4 to SPS10 For Solman 7.1 with SUM Problem

Similar Messages

Maybe you are looking for