Update tab missing reader xi

Hi,
I just updated Reader 9 to Reader XI. At least in my install--perhaps faulty--there is nowhere a tab for updates. Is it missing from the product, or do I need to reinstall?
GaryK

This option is present is Reader XI, you might want to re install Reader XI on your machine.
Link to donwload : http://get.adobe.com/reader/?promoid=BUIGO
Regards,
Deepak

Similar Messages

  • HT5534 Use this method if you originally purchased Pages, Numbers, or Keynote from the Mac App Store.  Open the Mac App Store and go to the Updates tab to update the iWork applications you purchased.  There is no Updates tab.  Very frustrating!

    Update for iWorks message says go to Apple store and use "update" tab.  There is no updates tab. 

  • After updating to adobe  reader 11.0.3 my registry was corrupted with a gapi32.dll missing error. I

    after updating to adobe  reader 11.0.3 my registry was corrupted with a gapi32.dll missing error. It was not missing and was conflicting with outlook as this dll file is a common file. The only way I could fix the problem was to do a system restore back to when I had the 11.0.2 version and everything will work with that. You have a problem with version 11.0.3 installation. The same thing happened on 3 computers so I know it is this new version of adobe reader which is the problem.

    It would be great, if you could provide us with the following details:
    1. The OS you are working on.
    2. The version of MS Office installed on your machine.
    3. A screenshot of the error message along with the scenario in which the same is displayed.
    4. How exactly did you go about updating Reader 11.0.02 to 11.0.03. Was it via the updater mechanism or by downloading the patch from the Adobe site.
    Also, it would be great if you could let us know if there was any other Windows or Antivirus related updates applied on your machine in the same timeframe as the Reader update.

  • HT4623 The 'software update' tab is missing from the General menu. How do I get it reinstalled?

    Software Update tab is missing from General settings. How do I fix this.  I NEED TO LOAD NEW new a new iOS

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • Secunia Software Inspector Reporting Adobe Reader 8.1.2 Security Update 1 Missing

    After deploying Adobe Reader 8.1.2 Security Update 1 to all of our managed computers, I ran a vulnerability scan using Secunia Software Inspector (http://secunia.com/software_inspector) and it is reporting that Adobe Reader is insecure (it is version 8.1.0.137) and references Secunia advisory SA30832 (http://secunia.com/SA30832). Specifically it reports that C:\Program Files\Adobe\Reader 8.0\Reader\AcroRd32.exe is version 8.1.0.137, which it is. However, running Adobe Reader and selecting Help \ About Adobe Reader 8... from the menu reports that Adobe Reader is version 8.1.2. And selecting Help \ Check for Updates... from the menu reports "There are no updates available at this time." Shavlik NetChk also does not report Adobe Reader 8.1.2 Security Update 1 as missing.
    The security bulleting from Adobe (http://www.adobe.com/support/security/bulletins/apsb08-15.html) does not contain sufficient information to know if the security update has been correctly applied (there is no manifest of files with versions and dates to check).
    It appears to me that the file C:\Program Files\Adobe\Reader 8.0\Reader\AcroRd32.exe is not sufficient to determine the version of the installed Adobe Reader, that the update to Adobe Reader 8.1.2 does not update the version of this file, and that Adobe Security Update 1 does not update this file. Therefore, I suspect that Secunia Software Inspector is incorrectly reporting that Adobe Reader is vulnerable. However, without details from Adobe about what file are updated and what versions they should be, I cannot be sure.
    How can I be sure that Adobe Reader is not vulnerable (it is fully up-to-date)?

    July 9 2008 When I run secunia inspector I am still getting a message that I have an earlier version of Adobe Reader installed though I have 8.1.2 including the security update for 8.1.2 installed. Here is what I get:
    (quote)
    This installation of Adobe Reader 8.x is insecure and potentially exposes your system to security threats!
    The detected version installed on your system is 8.1.0.137, however, the latest secure version released by the vendor, fixing one or more vulnerabilities, is 8.1.2.215.
    Update Instructions:
    Update to Adobe Reader 8.1.2.215 and apply Security Update 1.
    http://www.adobe.com/products/acrobat/readstep2.html (end quote)
    Why is this?

  • Missing "illustrations" tab and read-only information

    After a Windows XP Home repair, no illustration tab and read-only information by new music downloads. Have most recent itunes. Can someone help me...please?

    Thanks Gilad, In that case, is there then a way (via a script) that if I leave field 2 as not readonly, so the cursor moves into this field on tab out of field one, that I can reject any input from the user, if field one does not contain any data ? I thought this might be a solution. I have the script with the If Else statement, that sets the value of field 2 to "", if the value of field 1 is also "", but what is the else statement required to accept the value, if the content of field 1 is not "" ?.
    The script preoduces an error, if field 1 is blank, and I try to enter data into field 2 and then tab out of field.

  • Update on 10.6.8 fails due to digital signature on update is missing

    wanting to install the Parallels version 10 and it won't work on 10.6.8 version of my Mac OS so I learned how to go to the software update which indicates an update is available. When I go ahead and load the update it runs fine and then stops with a message that the Macbook Pro EFI Firmware Update can't be saved. It says the digital signature on the update is missing or invalid.
    I don't know if the digital signature is on my computer or the update? I would upgrade to a more recent version of the OS but don't know what will work.
    Can anyone help?
    Dan

    Parallels 10 isn't compatible with 10.6 according to the web site.
    Mac Requirements
    Hardware:
    A Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor (Core Solo and Core Duo processors are no longer supported)
    Minimum 2 GB of memory (4 GB of memory is recommended to run Windows 7 in a virtual machine or if your host OS is Lion)
    About 850 MB of disk space on the boot volume (Macintosh HD) for Parallels Desktop installation
    About 15 GB of disk space for each virtual machine
    Software:
    OS X Yosemite 10.10 or later
    OS X Mavericks 10.9.4 or later
    Mac OS X Mountain Lion 10.8.5 or later
    Mac OS X Lion 10.7.5 or later
    Check that your computer is compatible with Mountain Lion/Mavericks/Yosemite.
    To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
    MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
    MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
    Your Mac needs:
    OS X v10.6.8 or OS X Lion already installed
    2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
    8 GB or more of available space
    Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.      
    Application Compatibility
    Applications Compatibility (2)
    Do a backup before installing. 
    If you can/do upgrade, I recommend you make a copy of the installer and move it out of your Applications folder. The installer self-destructs. The copy will keep you from having to download the installer again.  You can make a bootable USB stick to install using this free program.
    Bootable USB Flash Drive – Diskmaker X
    Mountain Lion
    Note - Mavericks is no longer available.

  • Can not update tab if its not the default sub-tab.

    Can not update tab if its not the default sub-tab.
    JDeveloper Version 10.1.2.1.0 (Build 1913)
    Hi. I have a problem with a “lovOpenWindowAction”
    The UIX is created with a master UIX and have several sub-tab that is included as UIX-pages.
    The lovOpenWindowAction lies in the included UIX-page
    The sub-tab I have a problem with has a table with users. Then I have a “Create New” button than I want to click on and select a new user that should be included in the table in the sub-tab.
    When I click on the button I open a LOV-window. Here I select the user that I want to add.
    In the LOV Action-class I save my new value in the database. Then in the method “onLovUpdate” I update the iterator with the new values from the database.
    But in my GUI the subtab is not updated until I click on it.
    But if I make the subtab the default subtab then it all works just fine and the GUI is updated directly.
    Here is the code for the tableAction in the subtab. This code lies in an included UIX-page. Target is the table id.
    <tableActions>
    <button text="Create New" id=" createNewRollperson" accessKey="N">
    <primaryClientAction>
    <lovOpenWindowAction destination="FiskeRollpersonerLOV.do"
    source=" createNewRollperson "
    targets="joinedRollpersfiskeer message"/>
    </primaryClientAction>
    </button>
    </tableActions>
    Here is some code from the master UIX-page
    <subTabLayout id="flikar">
    <subTabs>
    <subTabBar selectedIndex="${ui:defaulting(param.index,0)}">
    <contents>
    <link id="resorFlik" text="Resor"
    disabled="${sessionScope.fiske.id == null}"
    selected="${(param.source == 'resorFlik') or empty param.source}">
    <primaryClientAction>
    <firePartialAction event="changeTab" targets="flikar globalHeader">
    <parameters>
    <parameter key="source" value="resorFlik"/>
    </parameters>
    </firePartialAction>
    </primaryClientAction>
    </link>
    <link id="rollpersonerFlik" text="Rollpersoner"
    disabled="${sessionScope.fiske.id == null}"
    selected="${param.source == 'rollpersonerFlik'}">
    <primaryClientAction>
    <firePartialAction event="changeTab" targets="flikar globalHeader">
    <parameters>
    <parameter key="source" value="rollpersonerFlik"/>
    </parameters>
    </firePartialAction>
    </primaryClientAction>
    </link>
    </contents>
    </subTabBar>
    </subTabs>
    <contents>
    <switcher childName="${param.source}"
    defaultCase=”ResorFlik">
    <case name="resorFlik">
    <include node="${ctrl:parsePage(uix, 'includes/ResorFlik')}"/>
    </case>
    <case name="rollpersonerFlik">
    <include node="${ctrl:parsePage(uix, 'includes/FiskeRollpersonerFlik')}"/>
    </case>
    </switcher>
    </contents>
    </subTabLayout>
    What am I missing?? I can’t have this subtab as the default subtab! Please help me with a solution!

    hi,
    Change the condition type to manual entry.
    or
    for example delivery costs will be different at the time of PO and actual delivery costs then at the time of invoice we select planned delivery costs and settle them first with the actual delivery cost.
    Thanks & Regards,
    Kiran

  • My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but  when reinstalling I get an older version is installed and cannot be removed. I need a soluti

    My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but  when reinstalling I get an older version is installed and cannot be removed. I need a solution.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Stop firefox opening multiple update tabs automatically

    Hi there I'm having trouble with firefox opening up auto update tabs by itself. When you are on any site after about 5 seconds a new tab opens requesting you to auto update my video player. Then 5 seconds later another tab opens saying the same thing. and again. and again and so on perpetually. If left unattended for two minutes 85+ tabs will have opened. I am running firefox 30 on windows 7. I have found a temporary fix is to reset firefox. This works for a few days and then the update will occur 5-10 times in a session and then stop. Then a few days later it reaches critical mass and hijacks firefox, tab after tab after tab.
    I would like to have gotten a screen shot but the reset lost the tabs. I don't think the problem will have shown in the troubleshooting diagnostic (mainly due to the reset). I have gone through my history and have managed to get the common URLs of the tabs.
    An occasional one
    Install in a Flash http://lp.sharelive<i></i>.net/?sysid=406&appid=1154&lpid=2883&subid=0081487796556604012
    An occasional one (that I don't have a URL for) is your firefox video player may be out of date please check to see the latest version. I click on the apply and install button and it links me to Video Player Recommended http://www.lpmxp2016<i></i>.com/6E29324C312E33517057256558763C2FA181039CFE41D8B572BE703BC40F1AFB45E301310E1D0C1782598A403ED704FC?tgu_src_lp_domain=www.ultimateplayersetup<i></i>.com&CID=274930&ClickID=07_12005543_aa8381ee-014e-4747-8386-21904dcce45b&AffliateReferenceID=OTF8MzIwOXxBVXwyfDF8fA
    Another occasional one
    Install in a Flash http://lp.sharelive<i></i>.net/?sysid=406&appid=1154&lpid=2883&subid=0081487796556604012
    Another occasional one
    Offer http://clkmon<i></i>.com/static/lprdr.html?r=http%3A%2F%2Flp.sharelive<i></i>.net%2F%3Fsysid%3D406%26appid%3D1154%26lpid%3D2883%26subid%3D0081487796556604012
    One of the more prolific
    Download VLC Player http://www.onefloorserve<i></i>.com/VLC/lp1.aspx?appId=335717&source=saymedia_1fa&cid=273021&clickid=07_11728158_b4d3e85d-4125-48da-b75c-7c0dc50e5af8
    One of the more prolific
    1Player http://www.onefloorserve<i></i>.com/lps/player_lp7.aspx?appId=339032&source=saymedia_1fa&cid=277984&clickid=07_11728149_d772e93e-ffda-4d8a-8d4e-16dd2b91f4dc
    One of the more prolific
    Video Player Recommended http://www.lpmxp2017<i></i>.com/3D47345752317B4C21753046437649629852665CDE1580523D7CF3B5A0C54C81B5742D4921BEEE755BD11A6BCC59CDE0?tgu_src_lp_domain=www.ultimateplayersetup<i></i>.com&CID=274930&ClickID=07_11728221_307d54a4-a760-4345-a66c-b324eed6e5f0&AffliateReferenceID=OTF8MzQ0OXxBVXwyfDF8fA
    One of the more prolific
    Please Update to the Latest Version http://www.lpmxp2017<i></i>.com/2378404779436B40657C70674D262053FC84823728C5E60FC131B6089B40884DEE657F2A41E779910CB63298C57A3116?tgu_src_lp_domain=www.ultimateplayersetup<i></i>.com&CID=274546&ClickID=07_11790200_65a8241e-09cd-43a3-b451-2b21533c1292&AffliateReferenceID=OTN8NDMyNnxBVXwyfDF8fA
    A common variant
    1Player http://www.onefloorserve<i></i>.com/lps/player_lp8.aspx?appId=339033&source=saymedia_1fa&cid=277992&clickid=07_11800247_6eb3dc39-4717-412b-8138-45204c0ad363
    Another one
    Please Update to the Latest Version http://www.lpmxp2016<i></i>.com/5870494A472D7C6636547E5F5A337B6B5BB218B9DB583B83A898A86EEF2E49732FE672124E77A0568DCF43D9F0DAF327?tgu_src_lp_domain=www.ultimateplayersetup<i></i>.com&CID=274931&ClickID=07_11976377_fea87410-eb92-4004-a5fb-d58db3f6fbb3&AffliateReferenceID=OTF8MzE4MXxBVXwyfDF8fA
    During all this going on is a program file download/install box is appearing asking if I want to save the file. Its 1.2 meg entitled player_setup.exe from download source http://kyle.mxp2203<i></i>.com/I2ETeZ9CRw3yY0pXQgCz3Ks7vFKYiPYoWpVJ7FDEM_LNTKNN4VpnFBNK408G1M9qRBUoGCRE1XTI-LPLDH-vsA-jFn3DLSvbup3AAcZaR3XjA8bbIoFhtsDY4dpBIl6j
    I thought if I downloaded the file and ran it then the messages would disappear. The file was a media player file associated with multiple advertising addons that would be installed if you did a typical install. I did a custom install and only installed the player. This did not stop the problem. The tab thing remained. I have uninstalled the program. The problem existed a few weeks before I did this so installing was not a trigger for further attacks.
    I have discovered that resetting firefox also breaks a few links. I have to re-allow popups and re-enable my java plugins. I am enrolled in a tafe course and it also runs a diagnostic. This is what it checks.
    Skillsoft Browser Capabilities Check.
    Your browser results have been saved to our server and can be
    accessed for the next 30 days using this URL.
    http://browser.skillport<i></i>.com/bh/results.asp?resultsid=%7BCA2FAAE1%2D1E93%2D4B5B%2D81EA%2DB7D02252DB2B%7D
    User Details.
    Your e-mail damo74@iinet<i></i>.net.au
    IP Address 124.171.39.176
    Approximate Connection Speed 895 kbps
    Date and Time of Test 02 Jul 2014 00:46:41
    Proxy Via
    Combined Technical Specifications (20140520)
    This test checks compatibility for a combined specification of SkillSoft Course
    Player, Simulation Player and SkillPort
    Test Operating System
    Result Pass
    Your Computer Microsoft Windows 7
    Test Browser Type
    Result Pass
    Your Computer Firefox
    Test Browser Version
    Result Pass
    Your Computer 30.0
    Test Adobe Flash
    Result Pass
    Your Computer 13.0 r0
    Test Java Environment
    Result Pass
    Your Computer Oracle Corporation
    Version 7.0 Update 60 (1.7.0_60)
    Test PopUp Blocker
    Result Pass
    Your Computer No PopUp Blocker Detected.
    I have checked my plugins and have received the following text
    Plugin Status
    Step 1: Click Update to update a plugin.
    Step 2: Complete all recommended updates before restarting your browser.
    Potentially vulnerable plugins Plugin Status Action
    Shockwave for DirectorAdobe Shockwave for Director Netscape plug-in, version 11.6.3.633 vulnerable
    11.6.3.633
    Update Now
    Shockwave FlashShockwave Flash 13.0 r0 vulnerable
    13.0.0.214
    Update Now
    Unknown Plugins Plugin Status Action
    Microsoft Office 2010The plug-in allows you to open and edit files using Microsoft Office applications unknown
    14.0.4761.1000
    Research
    Windows Live™ Photo GalleryNPWLPG unknown
    15.4.3538.513
    Research
    PicasaPicasa plugin unknown
    3.0.0.0
    Research
    globalUpdate UpdateglobalUpdate Update unknown
    1.3.25.0
    Research
    These plugins are up to date Plugin Status Action
    Adobe AcrobatAdobe PDF Plug-In For Firefox and Netscape 10.1.9 Up to Date
    10.1.9.22
    Up to Date
    Silverlight Plug-In5.1.30214.0 Up to Date
    5.1.30214.0
    Up to Date
    Java Deployment Toolkit 7.0.600.19NPRuntime Script Plug-in Library for Java(TM) Deploy Up to Date
    10.60.2.19
    Up to Date
    Java(TM) Platform SE 7 U60Next Generation Java Plug-in 10.60.2 for Mozilla browsers Up to Date
    10.60.2.19
    Up to Date
    On top of the plugin assessment was a warning from firefox. "Firefox has prevented the unsafe plugin "java deployment toolkit" from running on www.mozilla.org continue blocking / allow. I chose to continue blocking.
    I had a bit more of a look at my plugins through the add-on manager. Java deployment toolkit 7 was installed. And came up with a warning message that Java deployment toolkit 7 was vulnerable. On checking for more information I get diverted to
    Add-ons for Firefox
    Blocklist
    Java Deployment Toolkit (click-to-play)
    Java Deployment Toolkit (click-to-play) has been blocked for your protection.
    I have since disabled the plugin.
    Can you shed any light on what is going on or have I stumbled across the solution by disabling the toolkit.
    Hopefully we can address the issue before it gets hijacked again.
    Please help cos I get really frustrated when it gets hijacked and I have to reset.

    Kindly check the addons in your firefox
    Tools > Addons
    Remove or Disable all unwanted / suspicious ones.
    Then try to browse again. See if the problem comes again.

  • IOS 6.1.3 / Windows 7 - 64 bit.  I am connecting my IPhone 4 to my Windows desktop, in ITunes I click on IPhone and then the "Check for Update" tab.  It takes me to a Windows explorer window.  How do I get it to find updates?

    IOS 6.1.3 / Windows 7 - 64 bit.  I am connecting my IPhone 4 to my Windows desktop, in ITunes I click on IPhone and then the "Check for Update" tab.  It takes me to a Windows explorer window.  How do I get it to find updates?

    Hello ibebry
    Try using the Software Update on your iPhone by going to Settings > General > Software Update. One thing to keep in mind if you are trying it on the computer is to make sure that you are not pressing any keys down when checking for updates as that may bring up a pop up window to find the update file. 
    Update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht4623
    Regards,
    -Norm G.

  • Windows XP won't install drivers - "UPDATE" file missing

    I have installed Windows XP SP2 successfully ( it was a bumpy road ) and have reached the step where I'm supposed to use a Leopard disc to install the necessary drivers for using Windows with the MacBook hardware (video, speakers, etc). When I insert the Leopard disc a window appears saying that the setup.exe file on the disc is newer than something or other, so I click OKAY ( the Boot Camp instructions say to agree to any windows at this point ). The window goes away, and another one immediately opens saying " the necessary UPDATE file is missing". I click OKAY and the window closes. The End. No driver installation. I can use XP, but there is no sound. Windows Movie Maker won't even launch because it says the audio components are not available. This is probably because the drivers weren't installed. I imagine there will be many other problems.... Anyone have this solution???

    Here is a correction to my post. The window says: "This package requires a newer version of Windows Installer. Do you want to update the version of the Windows Installer on your system?" ( I click yes and the window goes away). The second window says: "The required resource 'Update' is missing". ( I click yes and the window goes away ).
    I think maybe XP is trying to download something from the internet and maybe it can't since I probably need the drivers to do that....?

  • TS1702 I use iphone5, I see an app update on the app store. but when App store and click on the update tab, it doesn't show me which application to update.. just give me a blank page.!!!! what is the solution for this.!!!!

    I use iphone5, I see an app update on the app store. but when App store and click on the update tab, it doesn't show me which application to update.. just gives me a blank page.!!!! I wouldn't able to know what app has to be updated, untill and unless i get check for each every app on the app store installed on my iphone... what is the solution for this.!!!! can any1 one help me out.!!!!

    Cc2528 wrote:
    The iTunes Store on my iPad is set up with all my music already. And at the very bottom it shows my apple Id username. The only place it shows the previous owners id is in the App Store...
    You can probably change the ID in the "iTunes and App stores" settings on the iPad....click on the wrong account ID , select sign out, then log in with your own ID, I have not done this but I think it works.....
    but I would be more inclined to to the factory reset and start afresh.

  • I have OSX Lion 10.7.5 and iphoto 11 9.2.1 I have spent 3 days making a book for christmas and when I go to buy it I am told I need to update iPhoto.  I went to apps and clicked on the update tab but it showed no results.  HELP!

    I am trying to buy the book I created in Iphoto and it says I need to update iphoto.  I have OSX Lion 10.7.5 and Iphoto 11 9.2.1.  I don't know how to update.  I tried to follow the suggested instruction by going to Mac App, clicking on update tab but nothing was found.  I am not sure what to do.  I have spent three days creating this book for a Christmas present and I am 5 hours from the closest Apple store.  Can anyone help.  I don't mind paying for upgrades if that is what is needed I just don't know what is needed or how to do it. 
    Thanks,
    Linda

    Yep, just install iDVD (plus sounds and jingles) and iWeb if you want it (but note that iWeb apparently won't work if you upgrade to Mountain Lion).
    Then use Software Update to get any late iDVD updates.

  • "digital signature on the update is missing or invalid" 10.6.8 combo 1.1 from 10.6.3.

    Also got posted in '10.3 or earlier' community, where other posts are regarding this issue ... I get "digital signature on the update is missing or invalid" trying to install 10.6.8 combo on MacBook currently using 10.6.3.  Have used Disk Utility, Restart, Shut Down, with no luck.  Used Software Update from 2 different avenues, and also downloaded from apple site.  Also searched support.apple, no luck.  Thoughts?

    ok. i've done the moving of those plist files, restarted and tried again. it hasn't worked, but thank you for your suggestion. i got excited for a minute or two.
    it now says An unknown installation error occured. The installer encountered an error that caused the installation to fail. contact the software manufacturer for assistance.

Maybe you are looking for