Update table ADRC

Hi All
I have to update table ADRC from another internal table of type ADRC.
My question is by which Function Module i can put a lock on ADRC  and then release after update.
Regards
Jai

<b>Lock table</b>
CALL FUNCTION 'ENQUEUE_E_TABLE'
EXPORTING
tabname = table_name
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
<b> Unlock Table</b>
CALL FUNCTION 'DEQUEUE_E_TABLE'
EXPORTING
tabname = table_name
chk this BAPI
<b>BAPI_BUPA_ADDRESS_CHANGE</b>
Message was edited by:
        Chandrasekhar Jagarlamudi

Similar Messages

  • Database error when updating table ADRC

    Hi,
    We are on ECC 5.0 & are facing a problem whille maintaining anything relevant to table ADRC.
    For eg., if we try to maintain storage location or create a vendor code (XK01), for some inputs it works ...but most times the update just terminates with a message "Database error when changing table ADRC".
    Pls. help.
    Thanks,
    Saba.

    Hi
    You can refer to following SAP Notes in case they help:
    385440   Repairing inconsistencies in Customizing addresses
    417809    Customizing objects display incorrect addresses
    186910    Customers / vendors with incorrect address
    Otherwise i want to know more about the error you are getting to help you in better way.
    Thanks and Regards
    Esha Rajpal

  • FM or BAPI that will change the address in table ADRC

    Hello,
    Is there any Function module or BAPI that will change the address in table, ADRC?
    Regards,
    Remi

    Hi,
    I don't use Business Partners / Biller Direct related information... So, the related FMs :
    BUPA / EBPP might not help
    My aim is to update ADRC table.
    I have found a couple of FMs that has to be followed in an Order :
    For inserting an Record :
    1) ADDR_INSERT
    2) ADDR_NUMBER_GET
    3) ADDR_MEMORY_SAVE
    4) ADDR_MEMORY_CLEAR
    For Updating :
    1) ADDR_UPDATE
    2) ADDR_MEMORY_SAVE
    3) ADDR_MEMORY_CLEAR
    But i don't know what to fill for address_handle !!
    How do i use these FMs??
    Regards,
    Remi

  • Database error reading table ADRC

    Hi,
    I am trying to add address in adrc table using the function module ADDR_SAVE_INTERN.
    When i pass the value of ADRC tables contents in this function module, I am getting an error saying "Database error reading table ADRC". Can you guess let me know what is this error?
    Thanks
    Slasher

    Hi slasher,
    it is always difficult and therefore not recommended to use SAP internal functions for any kind of database update. Addresses are part of business objects as all kinds of business partners, users, companies and the like. You should rather try to associate your addresses with one of those objects and do the maintenance by maintaining the business object. For this purpose you have a lot of BAPI functions like i.e. BAPI_BUPA_ADDRESS_CHANGE.
    Regards,
    Clemens

  • "Error in updating Table J_1iexchdr"

    Hi ,
    When I am creating the excise invoice, It's terminated the program and gives the following error
    "Error in updating Table J_1iexchdr"
    What can be the reason?
    Regards
    Prem

    Hi prem
    Look if these threads can help
    RG23C Update Problem
    Problem in SAP Script
    billing document not creating
    return delivery
    ************Reward points if usefull**************

  • Error in updating table J_1PART2

    Hi,
       I am getting an error while saving the excise invoice as 'error in updating table J_1PART2'.
    What would have gone wrong?????? please help!!!
    Thanks ,
    Ramya

    Discussion moved from SAP ERP Sales and Distribution (SAP SD) to Internationalization and Unicode
    Please use Internationalization and Unicode for you CIN related queries

  • Error in updating table J_1IEXCHDR,J_1IEXCDTL in tcode J1IJ

    Hi,
    while cancelling excise invoice in Tcode J1IJ ,
    we are getting 'error in updating table J_1IEXCHDR,J_1IEXCDTL'.
    what is missing or tell the procedure to resolve the issue.
    Regards,

    Discussion moved from SAP ERP Sales and Distribution (SAP SD) to Internationalization and Unicode
    Please use Internationalization and Unicode for you CIN related queries

  • Bapi : BAPI_ALM_ORDER_MAINTAIN not updating table AFVU-USR08

    Hi,
    I have a requirement to update table AFVU-USR08.I am actualy dealing with tcode IW32/IW33 where in we need to update operation-->enhancement tab.I am using BAPI : BAPI_ALM_ORDER_MAINTAIN to do this.I am testing the BAPI directly( Not called in any program ),I can see a message like so and so order saved under notification,But there is no entry in table AFVU-USR08.
    If any one have come across this prob. and got the sol. Pl. share it with me.
    Your solution will be more helpful.
    Thanks,
    Bharani.

    Hi Ferry,
    1. I have also tried ur given code before BAPI_TRANSACTION_COMMIT.
        l_fname = 'SOBKZ'.
        l_fvalue = 'U'.
        CALL FUNCTION 'CO_BH_MOD_SINGLE_FIELDS'
          EXPORTING
            aufnr_imp = wa_meth-objectkey(12)
            field1    = l_fname
            value1    = l_fvalue.
    but this program is giving dump for only this particular Value saying that This is PROTECTED field.
    Can anyone help me out on How to Update Special Stock Indicator on Components Tab of Maintenance Order (IW32).
    If anyone has faced such type of problem & solved it then please let me also.
    2. Which BADI to use for Updating Special Stock Indicator when we press enter on Components tab in Transaction IW32 ?..
    Thanks in advance,
    Hope to get the solution soon from all SAP gurus.
    and help will be appriciated .
    Gaurav.

  • Creating a better update table statement

    Hello,
    I have the following update table statement that I would like to make more effecient. This thing is taking forever. A little background. The source table/views are not indexed and the larger of the two only has 150k records. Any ideas on making more effecient would be appreciate.
    Thanks.
    Ryan
    Script:
    DECLARE
    V_EID_CIV_ID SBI_EID_W_VALID_ANUM_V.SUBJECT_KEY%TYPE;
    V_EID_DOE     DATE;
    V_EID_POE     SBI_EID_W_VALID_ANUM_V.POINT_OF_ENTRY%TYPE;
    V_EID_APPR_DATE DATE;
    V_CASE_CIV_ID     SBI_DACS_CASE_RECORDS.CASE_EID_CIV_ID%TYPE;
    V_CASE_DOE     DATE;          
    V_CASE_POE SBI_DACS_CASE_RECORDS.CASE_CODE_ENTRY_PLACE%TYPE;
    V_CASE_APPR_DATE           DATE;
    V_CASE_DEPART_DATE           DATE;
    V_SBI_UPDATE_STEP SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP%TYPE;
    V_SBI_CIV_ID SBI_DACS_CASE_RECORDS.SBI_CIV_ID%TYPE;
    CURSOR VALID_CIV_ID_FROM_EID IS
         SELECT EID.SUBJECT_KEY,
              TO_DATE(EID.PROCESS_ENTRY_DATE),
              EID.POINT_OF_ENTRY,
              TO_DATE(EID.APPREHENSION_DATE),
              DACS.CASE_EID_CIV_ID,
              TO_DATE(DACS.CASE_DATE_OF_ENTRY,'YYYYMMDD'),
              DACS.CASE_CODE_ENTRY_PLACE,
              TO_DATE(DACS.CASE_DATE_APPR,'YYYYMMDD'),
              TO_DATE(DACS.CASE_DATE_DEPARTED,'YYYYMMDD'),
              DACS.SBI_UPDATE_STEP,
              DACS.SBI_CIV_ID
         FROM SBI_EID_W_VALID_ANUM_V EID,
    SBI_DACS_CASE_RECORDS DACS
    WHERE DACS.CASE_NBR_A = EID.ALIEN_FILE_NUMBER;
         BEGIN          
              OPEN VALID_CIV_ID_FROM_EID;
    SAVEPOINT A;
              LOOP
                   FETCH VALID_CIV_ID_FROM_EID INTO V_EID_CIV_ID, V_EID_DOE, V_EID_POE,V_EID_APPR_DATE,V_CASE_CIV_ID, V_CASE_DOE,V_CASE_POE,V_CASE_APPR_DATE,V_CASE_DEPART_DATE,V_SBI_UPDATE_STEP,V_SBI_CIV_ID;     
    DBMS_OUTPUT.PUT_LINE('BEFORE');
                   EXIT WHEN VALID_CIV_ID_FROM_EID%FOUND;
    DBMS_OUTPUT.PUT_LINE('AFTER');
              UPDATE SBI_DACS_CASE_RECORDS
    SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_CASE_CIV_ID,
                   SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 1
    WHERE V_CASE_CIV_ID IS NOT NULL
    AND V_CASE_CIV_ID <> 0;
    UPDATE SBI_DACS_CASE_RECORDS
              SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
                   SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 2
    WHERE V_SBI_CIV_ID IS NULL AND V_SBI_UPDATE_STEP = 0
                   AND V_EID_DOE = V_CASE_DOE
                   AND V_EID_POE = V_CASE_POE
                   AND V_EID_APPR_DATE = V_CASE_APPR_DATE
                   AND V_EID_APPR_DATE = V_CASE_DEPART_DATE;
                   UPDATE SBI_DACS_CASE_RECORDS
              SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
                   SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 3
    WHERE V_SBI_UPDATE_STEP = 0
                   AND V_EID_DOE = V_CASE_DOE
                   AND V_EID_POE = V_CASE_POE
                   AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
    UPDATE SBI_DACS_CASE_RECORDS
              SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
                   SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 4
    WHERE V_SBI_UPDATE_STEP = 0
                   AND V_EID_DOE = V_CASE_DOE
                   AND V_EID_POE = V_CASE_POE
                   AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) > -4
                   AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) < 4 ;
         UPDATE SBI_DACS_CASE_RECORDS
              SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
                   SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 5
    WHERE V_SBI_UPDATE_STEP = 0
                   AND V_EID_DOE = V_CASE_DOE
                   AND V_EID_POE <> V_CASE_POE
                   AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
    UPDATE SBI_DACS_CASE_RECORDS
              SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
                   SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 6
    WHERE V_SBI_UPDATE_STEP = 0
                   AND V_EID_POE = V_CASE_POE
                   AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
    UPDATE SBI_DACS_CASE_RECORDS
              SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
                   SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 7
    WHERE V_SBI_UPDATE_STEP = 0
         AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
              UPDATE SBI_DACS_CASE_RECORDS
              SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
                   SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 8
    WHERE V_SBI_UPDATE_STEP = 0
    AND V_EID_DOE = V_CASE_DOE
                   AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) > -4
                   AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) < 4;          
                   UPDATE SBI_DACS_CASE_RECORDS
              SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
                   SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 9
    WHERE V_SBI_UPDATE_STEP = 0
    AND V_EID_DOE = V_CASE_DOE
                   AND V_EID_POE = V_CASE_POE;
              UPDATE SBI_DACS_CASE_RECORDS
              SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
                   SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 10
    WHERE V_SBI_UPDATE_STEP = 0
    AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) > -4
                   AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) < 4;     
              END LOOP;
              CLOSE VALID_CIV_ID_FROM_EID;
         COMMIT;
         END;     
    -----Thats it. Thanks for your help.
    Ryan

    Please use [ code] or [ pre] tags to format code before posing:
    DECLARE
         V_EID_CIV_ID SBI_EID_W_VALID_ANUM_V.SUBJECT_KEY%TYPE;
         V_EID_DOE DATE;
         V_EID_POE SBI_EID_W_VALID_ANUM_V.POINT_OF_ENTRY%TYPE;
         V_EID_APPR_DATE DATE;
         V_CASE_CIV_ID SBI_DACS_CASE_RECORDS.CASE_EID_CIV_ID%TYPE;
         V_CASE_DOE DATE;
         V_CASE_POE SBI_DACS_CASE_RECORDS.CASE_CODE_ENTRY_PLACE%TYPE;
         V_CASE_APPR_DATE DATE;
         V_CASE_DEPART_DATE DATE;
         V_SBI_UPDATE_STEP SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP%TYPE;
         V_SBI_CIV_ID SBI_DACS_CASE_RECORDS.SBI_CIV_ID%TYPE;
         CURSOR VALID_CIV_ID_FROM_EID IS
              SELECT EID.SUBJECT_KEY,
               TO_DATE(EID.PROCESS_ENTRY_DATE),
               EID.POINT_OF_ENTRY,
               TO_DATE(EID.APPREHENSION_DATE),
               DACS.CASE_EID_CIV_ID,
               TO_DATE(DACS.CASE_DATE_OF_ENTRY,'YYYYMMDD'),
               DACS.CASE_CODE_ENTRY_PLACE,
               TO_DATE(DACS.CASE_DATE_APPR,'YYYYMMDD'),
               TO_DATE(DACS.CASE_DATE_DEPARTED,'YYYYMMDD'),
               DACS.SBI_UPDATE_STEP,
               DACS.SBI_CIV_ID
              FROM SBI_EID_W_VALID_ANUM_V EID,
               SBI_DACS_CASE_RECORDS DACS
              WHERE DACS.CASE_NBR_A = EID.ALIEN_FILE_NUMBER;
    BEGIN
         OPEN VALID_CIV_ID_FROM_EID;
         SAVEPOINT A;
    LOOP
         FETCH VALID_CIV_ID_FROM_EID INTO V_EID_CIV_ID, V_EID_DOE,
              V_EID_POE,V_EID_APPR_DATE,V_CASE_CIV_ID, V_CASE_DOE,
                   V_CASE_POE,V_CASE_APPR_DATE,V_CASE_DEPART_DATE,V_SBI_UPDATE_STEP,V_SBI_CIV_ID;
         DBMS_OUTPUT.PUT_LINE('BEFORE');
         EXIT WHEN VALID_CIV_ID_FROM_EID%FOUND;
         DBMS_OUTPUT.PUT_LINE('AFTER');
         UPDATE SBI_DACS_CASE_RECORDS
          SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_CASE_CIV_ID,
           SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 1
         WHERE V_CASE_CIV_ID IS NOT NULL
          AND V_CASE_CIV_ID <> 0;
         UPDATE SBI_DACS_CASE_RECORDS
          SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
           SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 2
         WHERE V_SBI_CIV_ID IS NULL AND V_SBI_UPDATE_STEP = 0
          AND V_EID_DOE = V_CASE_DOE
           AND V_EID_POE = V_CASE_POE
            AND V_EID_APPR_DATE = V_CASE_APPR_DATE
             AND V_EID_APPR_DATE = V_CASE_DEPART_DATE;
         UPDATE SBI_DACS_CASE_RECORDS
          SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
           SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 3
         WHERE V_SBI_UPDATE_STEP = 0
          AND V_EID_DOE = V_CASE_DOE
           AND V_EID_POE = V_CASE_POE
            AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
         UPDATE SBI_DACS_CASE_RECORDS
          SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
           SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 4
         WHERE V_SBI_UPDATE_STEP = 0
          AND V_EID_DOE = V_CASE_DOE
           AND V_EID_POE = V_CASE_POE
            AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) > -4
             AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) < 4 ;
         UPDATE SBI_DACS_CASE_RECORDS
          SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
           SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 5
         WHERE V_SBI_UPDATE_STEP = 0
          AND V_EID_DOE = V_CASE_DOE
           AND V_EID_POE <> V_CASE_POE
            AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
         UPDATE SBI_DACS_CASE_RECORDS
          SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
           SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 6
         WHERE V_SBI_UPDATE_STEP = 0
          AND V_EID_POE = V_CASE_POE
           AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
         UPDATE SBI_DACS_CASE_RECORDS
          SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
           SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 7
         WHERE V_SBI_UPDATE_STEP = 0
          AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
         UPDATE SBI_DACS_CASE_RECORDS
          SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
           SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 8
         WHERE V_SBI_UPDATE_STEP = 0
          AND V_EID_DOE = V_CASE_DOE
           AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) > -4
            AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) < 4;
         UPDATE SBI_DACS_CASE_RECORDS
          SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
           SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 9
         WHERE V_SBI_UPDATE_STEP = 0
          AND V_EID_DOE = V_CASE_DOE
           AND V_EID_POE = V_CASE_POE;
         UPDATE SBI_DACS_CASE_RECORDS
          SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
           SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 10
         WHERE V_SBI_UPDATE_STEP = 0
          AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) > -4
           AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) < 4;
    END LOOP;
    CLOSE VALID_CIV_ID_FROM_EID;
    COMMIT;
    END;Peter D.

  • Update table a columns using columns from table b (values of 2 columns of table b need to taken from table c)

    Guys,
    I need to update table A columns col3, col4, col5 and col6 by table b columns col3, col4, col5 and col6 however table b col5 and col6 values need to come from table c col1.
    Means table b col5 and col6 have values in it however i need to replace them with value from table c col1 and need to update table a col5 and col6 accordingly.
    table a and table b has col1 and col2 in common.
    i am trying something like this.
    Update a
    a.col3 = b.col3,
    a.col4 = b.col4,
    a.col5 = (select col1 from table_c c where c.col2=b.col5),
    a.col6 = (select col1 from table_c c where c.col2=b.col6)
    from table_A a inner join table_b
    on  a.col1=b.col1 and a.col2=b.col2
    can someone help me reframe above update query?
    thanks in advance for your help.

    Try the below:(If you have multiple values, then you may need to use TOP 1 as commented code in the below script)
    create Table tableA(Col1 int,Col2 int,Col3 int,Col4 int,Col5 int,Col6 int)
    Insert into tableA values(1,2,3,4,5,6)
    create Table tableB(Col1 int,Col2 int,Col3 int,Col4 int,Col5 int,Col6 int)
    Insert into tableB values(1,2,30,40,50,60)
    create Table tableC(Col1 int,Col2 int,Col3 int,Col4 int,Col5 int,Col6 int)
    Insert into tableC values(100,50,30,40,2,2)
    --Insert into tableC values(200,50,30,40,2,2)
    Insert into tableC values(100,60,30,40,2,2)
    Select * From tablea
    Update a Set
    a.col3 = b.col3,
    a.col4 = b.col4,
    a.col5 = (select col1 from tablec c where c.col2=b.col5 ),
    a.col6 = (select col1 from tablec c where c.col2=b.col6 )
    from tableA a inner join tableb b
    on a.col1=b.col1 and a.col2=b.col2
    --Update a Set
    --a.col3 = b.col3,
    --a.col4 = b.col4,
    --a.col5 = (select Top 1 col1 from tablec c where c.col2=b.col5 Order by c.Col1 asc),
    --a.col6 = (select Top 1 col1 from tablec c where c.col2=b.col6 Order by c.Col1 asc)
    --from tableA a inner join tableb b
    --on a.col1=b.col1 and a.col2=b.col2
    Select * From tablea
    Drop table tablea,Tableb,TableC

  • Help with UPDATE table and database RELATIONSHIPS

    HI there, I have been trying to create an update table for
    weeks now and keep getting error messages.
    The database has a table named:
    "books" in the table cells are "idbook" and "book".
    "suppliers" in the table cells are "idsupplier" and
    "supplierName".
    "category" in the table cells are "idcategory" and
    categoryName"
    They all have a relationships with this table:
    "results" in the cells are "idbook", "idsupplier" and
    "idcategory".
    This "results" table brings all of the above tables together.
    When I try to do an update, i am doing one to the results
    table. Is this correct?
    The updates have problems because when drawing the text to
    the update table to view it comes in text form.
    When trying to update, it wont becuase all of the cells in
    the results table are numeric. This is because of the
    relationships.
    Can anyone suggest where i may be going wrong.
    Ask anything you need to.
    TA

    MM_editCmd.CommandText = MM_editQuery
    MM_editCmd.Execute
    MM_editCmd.ActiveConnection.Close
    If (MM_editRedirectUrl <> "") Then
    Response.Redirect(MM_editRedirectUrl)
    End If
    End If
    End If
    %>
    <%
    Dim Recordset1__MMColParam
    Recordset1__MMColParam = "1"
    If (Session("MM_UserName") <> "") Then
    Recordset1__MMColParam = Session("MM_UserName")
    End If
    %>
    <%
    Dim Recordset1
    Dim Recordset1_numRows
    Set Recordset1 = Server.CreateObject("ADODB.Recordset")
    Recordset1.ActiveConnection = MM_connSeek_STRING
    Recordset1.Source = "SELECT * FROM Query1 WHERE UserName = '"
    + Replace(Recordset1__MMColParam, "'", "''") + "'"
    Recordset1.CursorType = 0
    Recordset1.CursorLocation = 2
    Recordset1.LockType = 1
    Recordset1.Open()
    Recordset1_numRows = 0
    %>
    <%
    Dim rsUpdate
    Dim rsUpdate_numRows
    Set rsUpdate = Server.CreateObject("ADODB.Recordset")
    rsUpdate.ActiveConnection = MM_connSeek_STRING
    rsUpdate.Source = "SELECT * FROM tblSpecies"
    rsUpdate.CursorType = 0
    rsUpdate.CursorLocation = 2
    rsUpdate.LockType = 1
    rsUpdate.Open()
    rsUpdate_numRows = 0
    %>
    <%
    Dim Repeat1__numRows
    Dim Repeat1__index
    Repeat1__numRows = -1
    Repeat1__index = 0
    Recordset1_numRows = Recordset1_numRows + Repeat1__numRows
    %>
    <html>
    <head>
    <link href="css%20files/paragraph.css" rel="stylesheet"
    type="text/css">
    <script language="JavaScript" type="text/JavaScript">
    <!--
    function MM_preloadImages() { //v3.0
    var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new
    Array();
    var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0;
    i<a.length; i++)
    if (a
    .indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a;}}
    //-->
    </script>
    </head>
    <body bgcolor="#FFFFFF" leftmargin="0" topmargin="0"
    marginwidth="0" marginheight="0"
    onLoad="MM_preloadImages('images/Publicationb.gif','images/Factsheetsb.gif')">
    <table width="100%" height="100%" border="1"
    cellpadding="0" cellspacing="0" bordercolor="#5D5D5D">
    <tr>
    <td colspan="2">
    <div align="right"></div>
    <div align="left"></div>
    </td>
    </tr>
    <tr>
    <td colspan="2"><table width="100%" height="100%"
    border="0" cellpadding="0" cellspacing="0"
    bordercolor="#5D5D5D">
    <tr>
    <td valign="top"><form
    ACTION="<%=MM_editAction%>" METHOD="POST" name="form1">
    <table width="90%" border="0" align="center"
    cellpadding="0" cellspacing="0">
    <tr>
    <td valign="top"><div
    align="center"></div> <table border="1" align="center"
    cellpadding="2" cellspacing="0" bordercolor="#FFFFFF">
    <tr bgcolor="ECECD7">
    <td colspan="2"><div align="center">
    <p><strong><font size="3">Update Key Word
    &amp; Category</font></strong></p>
    </div>
    </td>
    </tr>
    <tr>
    <td><div align="center">
    <p><font size="1">Enter Up to 10 Species /
    Product
    Name</font></p>
    </div>
    </td>
    <td><div align="center">
    <p><font size="1">Select a
    Category</font></p>
    </div>
    </td>
    </tr>
    <tr>
    <td colspan="2" bordercolor="#D0D09D">
    <%
    While ((Repeat1__numRows <> 0) AND (NOT
    Recordset1.EOF))
    %>
    <table width="100%" border="0" cellspacing="0"
    cellpadding="0">
    <tr><td width="50%"><div align="center">
    <input name="f1" type="text" id="f13"
    value="<%=(Recordset1.Fields.Item("TimberSpecies").Value)%>"
    size="33">
    </div></td>
    <td width="45%"><div
    align="center"></div></td></tr></table>
    <%
    Repeat1__index=Repeat1__index+1
    Repeat1__numRows=Repeat1__numRows-1
    Recordset1.MoveNext()
    Wend %>
    <div align="center"> </div> <div
    align="center">
    </div></td></tr><tr>td
    colspan="2"> </td></tr><tr><td
    colspan="2"><div align="right"><p><font
    size="1">To Finalise Your Changes Please Press the Update
    Button      
    <input name="update2" type="submit" id="update"
    value="Update">
    <input type="hidden" name="MM_update" value="form1">
    <input type="hidden" name="MM_recordId" value="<%=
    rsUpdate.Fields.Item("TimberSpecies").Value %>">

  • What are the Update tables?

    In LO Delta scenario, Data posted parallel into document tables and update tables. What are the Document tables? What are the Update tables?
    Give example for Application 11, which is document tables, and update tables?

    Hello Mannev,
    Document tables are the actual application tables where the data is posted when you post a document in R/3.
    Examples can be MSEG, VBRK etc.
    Update tables are the intermediate tables which store data read from document tables. The V3 runs collects deltas in form of LUWs from these update tables and populates the delta queues.
    hope this helps..
    thanks,

  • How to update table in EJB QL

    Hi friends,
    Anybody tell me how to modify data in the table using EJB QL....
    I am using XDoclet,Weblogic,EJB,MySQL
    I want to update table data using EJB QL,Xdoclet...Anybody help me
    thanks in advance
    priya

    don't double post. You can edit posts you know, or add a reply with the additional information.
    http://forums.sun.com/thread.jspa?threadID=5417462&tstart=0

  • How to update a table of contents when the feature "update table of contents" is unavailable?

    Hello folks,
    I've been struggling all morning with this issue and am completely desperate.
    First, some info:
    - I am making a spanish versions of an english documents: everything in the original doc was then edited, including TOCs. What I got at first, was a first spanish document already filled with spanish content.
    - I was not the primary creative of the document I'm workin on and am unable to get in touch with whoever that can be.
    - My document is a 200 pages text only document, with 12 chapters and, at the beginning of each chapter, a specific TOC for that very chapter.
    - Inside each chapter, there are only Sections and Subsections, no other style. Those are the two levels in the TOCs.
    - There is also a General TOC at the beginning of the document: that one only shows the Chapter names and the page number where to locate them.
    My problem:
    - Somewhere along the way, from one doc to another, the TOCs stopped to update the page numbers automatically.
    - Now I have sections and subsections that are shown in one page (for instance 204) but they actually are on page 135.
    - When I try to update the TOCs, I stand on the TOC itself as I was told in many tutorials, but the "update table of contents" feature is unavailable, even in the main TOC at the very beginning of the doc.
    It is like if I wasn't standing in the actual TOC, but there is no actual TOC anywhere that I could refer to.
    What can I do? I am changing the wrong page numbers manually but, of course, that is not ideal... and it may become more and more tricky while I keep producing new documents each based on the previous one.
    Any help will be much appreciated.
    Warm regard from sunny Paris, France!
    Sasha

    You've just confused me.
    My understanding of how this is set up is that either:
    This is a book, and there is a master TOC that includes all book documents and a document-specific TOC in each component file, or
    This is a single file and there is one master TOC that includes all sections and a section-specific TOC that includes only the individual section.
    In the first case, I think you would want two TOC styles set up, one that includes the chapter heads (if I understood how you said this worked) for the for the master, and you would include all docs in the book when you generate it, and a second style for the individual chapters, with the subheadings you want to include.
    In the second case, it would be similar, but instead of only one style to cover the section TOCS, I think you would need to create a unique set of pargraph styles for the headings in each section (they can all be the same format, based one section, just with unique names), and then make a TOC style for each section that includes only the styles from that section.
    OK,  wait a sec. I just reread what you said: "Another thing: when the numbers are "linked" and updating well, they  display indide a little box. Not a text box, but a kind of little frame  around the numbers. That frame makes it imposible to delete just one  number: when the TOC says that Section 6.1 is in page 135, for example,  you cannot delete just the 5, it deletes, not just the 3 numbers, but  also the doted tab."
    I think these are NOT normal TOCs created by using Layout > TOC (but you could replace them with ones that are, if you set up your styles properly and the text you want to include is appearing on the pages). Those little boxes you mention sound like cross-references, which should update automatically without any intervention at all. Unfortunately, cross-refs can be flakey, especially if they point to another document. I'd open the cross-refs panel and see if you need to recreate a bunch of links.

  • Add Fields from table ADRC (Fields Name 1 to 4) for Open Item Processing

    Hi SAP Expert:
    Our client requires vendor/customer name to be displayed in the open item processing line layout for transaction code f-58, so they can double check if the vendor name is complete as intended. 
    We intend to add fields from table ADRC instead of REGUH since the characters in maintaining vendor/customer name is 40 characters and REGUH - ZNME1s are only 35 characters. 
    We have managed to add fields from ADRC and change the SAPDF05X program and were able to display the names in open item layout, except that the program seems to "automatically" create a generic table which only carries 30 characters of the vendor/customer name.  The source table should be RFOPS_DK but the program automatically looks up from table RFOPS_GEN for the particular fields - Name 1 to 4.  Is there a way to "instruct" the program to use RFOPS_DK instead of RFOPS_GEN?
    Hope this will merit somebody's attention... Thanks !!!

    Thanks,  i have assigned the layout via o7v3,  it is the program that i have a problem with,  actually another program that we change is the program MF05BFPO where it generates data to be displayed in the FBZ4 screen,  though we add a field with 40 characters (ADRC Name 1 to 4)  what the program dispalys is a 30 character Name1 to 4 from structure RFOPS_GEN. 
    My question is can i extend/change the structure RFOP_GEN to 40 characters,  is there any SAP standard program that will aftected if i do so?  thank very much...
    Lorena

Maybe you are looking for

  • Titles and Transitions doe not work after upgrading to Snow Leopard

    I can not get my Titles or transitions to work in iMovie any more after upgrading to Snow Leopard. Everything goes to a black screen. I am having problems with final cut express also. Anyone have an idea when there will be a patch to fix this? I woul

  • Games into my ipod trouble

    hello, i have a 5th gen ipod video, and i have games ready to be put into my ipod. when i plug it in and try to sync it, i get this error, "some of the games...blah blah blah... because you are not authorized for them on this computer. so i try to go

  • Altering a DOM once it has been created after parseing an XML file

    Does anyone know of a nice easy way to edit a DOM once I have parsed it in so that I can write an altered XML file back to disk. (I can do the reading and writing easy enough, I just need the editing part. I used to have code that worked if the child

  • ITunes Store new Album list

    Hi all, I hope this is the correct section... I remember that some times ago, when I had to search the new album list in iTunes Store, I had a screen divided in 4 sections (1 for each week) with all the new albums / singles... Now I'm not able anymor

  • OCT MSP File Not Applying Changes

    Hello All, I am trying to use an msp file to apply some settings changes; e.g. add and remove a new Normal.dotm, themes, Outlook defaults, etc.  When I edit the file, everything entered in correctly.  I have tried using a batch file and manually runn