Update table after every hour

Hi friends,
I want to write a database trigger, function or a procedure that fires after every hour. check a certain condition and if satisfied update records of the table.
How can i do this????
Pliz help
mirza Imran Baig

If you have access to this site you have access to the documentation: there's a link from the OTN home page. For your convenience, here is the link to the DBMS_JOB docs: http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96612/d_job.htm#999107
You don't say which version of the database you have - this the 9i docs, but the 817 docs are also on OTN. Besides, I don't think DBMS_JOB has changed much.
Cheers, APC

Similar Messages

Exchange 2013 disconnects externally after every hour but works fine internally

Hello All,
I have a very strange problem in my office. At the new years eve, there was a disconnection in our Internet from our ISP and everything came back online again after 1 hour. before this happened everything was working fine such as externally all the mobile
devices were able to connect to exchange 2013 and event owa was working fine and laptop devices as well. All was good, but once the disconnect happened, i am only able to access my emails over 3 G connection but not over the ISP connection, what i mean from
that is that if i try to connect to owa or my outlook from home DSL connection i cannot connect but with my 3g connection on my phone i can connect and everything works fine. i have re issued the certificates and installed them again, but still the same thing,
after every hour or sometimes less the exchange 2013 sort of disconnects and starts working when i restart the CAS server where the traffic is routed to.
Has any one faced this issue, please help, i was thinking that something wrong with my firewall as i was not even able to connect to my ssl vpn so i thought that firewall is culprit, but i have replaced the firewall as well and still the same issue.
Please help, i am trying to troubleshoot this problem since last 10 days but with no luck.
Thank You.

Have you checked the network settings? Do you have multiple network adapters? May be DNS related also. Check, if you have configured DNS correctly.
Regards from ExchangeOnline.in|Windows Administrator Area | Skype:[email protected]

Schedule my report to run after every hour

Hi All,
Can someone please tell me how can I schedule my report to run after every 1 hour so that the dashbaord performance increases.I have started the scheduler service .
Thanks a lot for your help

Hi,
create an ibot for the report.
first configure the BI delivers, you can find the steps here,
http://oraclebizint.wordpress.com/2007/09/13/oracle-bi-ee-10133-configuring-delivers-ibots/
sorry. as you have already started the scheduler service you don need to go thru the above link.
thanks,
karthick
Edited by: kart on May 24, 2010 12:44 PM

Update table after filling an adobe interactive form inside a workflow

Hi
I have the following workflow problem:
I made a webdynpro application that incudes an adobe interactive form. An user fill this form. After filling the form he will press the submit button. The data will be introduced in the custom table and a workflow will be started.
Inside the workflow, I attached the form filled by the user. After attaching it I introduce a user decision step in order to see the content of the pdf attachment, modify it and send again. So, the person that will execute the workitem has to open that pdf and fill some additional fields. The information should be updated in the table and then send to other persons. I don't know how to update the table with the new values that are inserted in the form in that decisional step and send the updated form to the other users.
Thank you in advance !
Iulia

Hi Iulia
You cannot do that through decision step with attachment. You have to do with task registation in t-code SWFVISU. so the work item will come to UWL once the approver clicks the work item it opens and entered his comments, You have to caputer the comments and pass these comments to the workflow container element from there you update to your custom table.
Regards
vijay

Changing Automaticaly WPA key After/Every hours Airport / Widget

Hello all,
I was wondering if there is a way or an app that could change the WPA key (of Aitport) automatically, either at regular intervals or else.
Thanks

I'm not a wireless security expert, but I do read a bit. I guessing that you used a pretty weak password.
I don't know if what you propose is possible, but I suspect it's not in consumer level electronics. People who do security for a living don't find it 'tedious'. It's a fact of doing business. I don't see where it would be workable on a network with more than just a couple of devices. Recent history has shown that just about every wireless security method chosen will eventually get hacked. Wireless is insecure by nature and should not ever be used if a network must be 'secure'. Reference TJMaxx.
The acceptable risk factors can be adjusted for by taking the time to set up and use the highest levels available today on the consumer market, even if this means buying later model wireless equipment. At present, the best consumer level of wireless security is WPA2. I've still got clients running wireless wide open because they can't be bothered, or they are running WEP because that's the level on the router the phone company provided. Those are the targets for the War Drivers.
Since even WindowsXP with Service Pack 3 can now use WPA-AES, if the hardware supports it, then there is no valid reason not to upgrade your wireless hardware to that standard. The problems I run into is with clients who have to maintain lower standards for older equipment, then worry that they can be hacked. You don't get it both ways. If the old laptop can only do WEP which has been cracked since 2001 then chuck it or get a different wireless card for it.
Here is a related thread:
http://discussions.apple.com/thread.jspa?threadID=1852904
As a side note: every demonstration I've bothered to watch on YouTube that purports to having cracked WPA wireless is an exaggeration. There are methods available to see some of the data in the stream, and guess the rest, and then run a dictionary attack to eventually be able to login to an access point. When you use a 26 digit alphanumeric password, the time it takes to actually get the password becomes many years using several computers 24x7. The resources for this kind of hack wouldn't be cheap and probably not in your apartment building or on the neighborhood block (think governments). Running VPN deals with this pretty well - re-encrypt the data in the tunnel that's inside the encrypted connection.
Only the people who update their equipment, and their OS will have any sort of protection over time. People who don't become roadkill.

IPhoto updating library after every iPhone pic transfer is the Problem! PLS Help

Hello.
Everytime I plug in my iPhone, iphoto opens us and promtly asks me if I wish to download all the new picutres, as it should.
Once I complete the transfer, I exit the iPhoto program, and without fail, iPhoto begins to update my ENTIRE photo library of over 45K pictures, dating back to the early 2000's.
I am NOT using any cds, I just got this great new iMac in March of 2011, so i know its got the newest and truest hard and software installed. I just cannot figure out why it needs to update the old data too.
Anyone else feeling my pain and has since fixed it?
please advise...
Thank you in advance.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Updating modem after many hours

So my kin two has been in the "updating modem do not remove the battery" screen for a day now and doesnt seem to be doing anything. I took out the battery, tryed the sync and nothing has worked. I took it to the store and they said there was nothing they could do and only option is to get a new phone.
Does anyone know how to fix this? I think is **bleep** to have to pay for a new phone since we dont have insurance and they sold a defective piece of C%$p phone.

Hello ihatekintwo,
Thank you for sharing your concern with the community. I would like to investigate this issue further for you. May I ask that you send me a private message with your full name, mobile number, and a brief description of what happened before you had this error message on the device. I appreciate you patience and understanding on this issue.

HT1222 This update stuck after 4 hours of "preparing" and "downloading". Why?

Why is this download update to my iOS 6.1 ipad 2 taking so long? It seems stuck!

If you are doing this over WiFi, try using iTunes on your Computer.

NTFS server keeps dies every hour.

I have iFS up and running on an NT 4.0 machine. I am using SMB for users to access their information.
(1) I would like to know why the NTFS server keeps dying after every hour or so.
(2) How I can avoid this from happening again.
Thanks.

You need to make sure first that if you have enough memory. See our installation guide for memory requirements. If you have your Database on the same machine as iFS, you need at least 512 MB of memory.
If the problem still exists, we need more information to diagnose what is wrong. Can you provide your NTFS log file?
null

Generate every hour event 2331 for each DP after Software update Deployment Package deletion

We have an organization build on SCCM 2012 R2 with 270 DPs configured with DP Pulls function. The centralized point contains DP sources available for all DP Pull.
We have some problems with Windows Update deployment package, and we decide to delete them. We first remove them from all DPs. After more than a month we delete the deployment package. From this day, we see that the SMS_Distribution_Manager service generate
every hour logs for contacting each of the 270 DPs to ask them for deleting the package.
Remark: At the time we run the delete, some of the DPs were not connected. After 3 weeks all of them were connected. A month later, the SMS_Distribution_Manager
generate always these events every hour.
Each DP responds with a 2331 event that seems OK. Every hour the system begin with two events (2301 and then 2300 for this package, after a 2331 for each
DP). All these events are also present in the application log of the Event Viewer. After the last DP connection that respond with 2331 event, there are no event that generalize a task for the package to definitively remove it from the database.
Could anyone help me to correct the system?

There are no error messages. There are only messages generated in Distribution_manager logs and Event Viewer, showing us server processing and network activity on package that was deleted over 40 days, and that happened every hours. The Microsoft support
give us directives to delete orphan records in 4 tables
pkgServers_L,pkgServers_G,PkgStatus_L,PkgStatus_G)
At this time the correction has positive effect.
A sample of event generated
Log Name:      Application
Source:        SMS Server
Date:          26.02.2014 09:56:19
Event ID:      2331
Task Category: SMS_DISTRIBUTION_MANAGER
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      wwww.xxxx.yyyy.zzz
Description:
On 26.02.2014 09:56:19, component SMS_DISTRIBUTION_MANAGER on computer wwww.xxxx.yyyy.zzz reported: Distribution Manager successfully removed package "PS100066" from distribution point "["Display=\\aaa.bbb.ccc.dddd\"]MSWNET:["SMS_SITE=xxx"]\\aaa.bbb.ccc.dddd\".
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="SMS Server" />
    <EventID Qualifiers="16384">2331</EventID>
    <Level>4</Level>
    <Task>12</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-02-26T08:56:19.000000000Z" />
    <EventRecordID>825362</EventRecordID>
    <Channel>Application</Channel>
    <Computer>wwww.xxxx.yyyy.zzz</Computer>
    <Security />
</System>
<EventData>
    <Data>PS100066</Data>
    <Data>["Display=\\aaa.bbb.ccc.dddd\"]MSWNET:["SMS_SITE=PS1"]\\aaa.bbb.ccc.dddd\</Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>On 26.02.2014 09:56:19, component SMS_DISTRIBUTION_MANAGER on computer wwww.xxxx.yyyy.zzz reported: </Data>
    <Data>
    </Data>
</EventData>
</Event>
Regards

HT4623 My iphone5 keep restarting every hour after i update it with the new ios 7.1.1.Do u know why?

My iphone5 keep restarting every hour after i update it with the new ios 7.1.1.Do u know why?

have you ever tried itunes on your friends pc or someone if you have trusted that pc in your iphone then you can

[FEATREQ] New 'Live Updating' option: realtime, every x hours, every day...

Hey all,
I just posted this as feedback to Apple, but I would like to hear your opinions on this as well.
The problem is that my iTunes and computer are stuttering at the beginning of every song, because all my smart playlists have to be updated with the new information that the previous song has been played. This causes iTunes to freeze up for about 20 to 25 seconds at the start of every new song, despite having quite a fast computer with plenty of RAM.
The culprit of course is that I have a large library (13k songs), as well as dozens of smart playlists depending on each other. However, the question is whether I should be punished for this? After all, you want to fill up that 80GB iPod, no? Anyways, I'm suggesting an extra option that would get rid of these issues no matter how big your library is or how many smart playlists you've got.
The feature I'm suggesting that would get rid of this issue is the following: instead of updating all smart playlists 'realtime', give the user the option of doing this live updating real time, every x hours, every day or only at startup. You could give the user this option either for every playlist independently, or globally in the settings for iTunes. With this extra option, I would configure iTunes to update my playlists every 4 hours or something like that, and I would get the stuttering only every 4 hours instead of every 4 minutes, as it's right now.
Are there any other people who would like this option?
What do you think? Useful? Rubbish?
Sincerely,
Tijl Kindt

Are you sure that this is the problem? I have a 300 gig library with numerous interdependent smart playlists. I also mostly play iTunes over Airtunes. I don't have this problem. I do see some slowness in launching iTunes as a result of the smart playlists but once it's open, I don't have a problem. I'm guessing you turned live updating off on all the playlists to see if that solved the problem as I don't know how else you would have come to this conclusion.
The only short term fix I can see is to turn off live updating on at least some of the playlists and then turn it back on periodically.

IPhone 3G freezes after every call after 4.2 update

There isn't much more to say other than that. As soon as I installed the 4.2 update my phone now freezes after every call. It stays frozen for hours, right now it's been frozen over 12 hours (screen is even still lit up). I'm tired of completely restoring my phone after every phone call!!!

its nt a casual evente in many iphone 3G with OS 4.2
really apple is the responsable.
we are honest users, and we need a real answer.
No reset the phone many tiemes, or change the phone.
The problem is sorftware and internal politics in apple.
no more dirty play ...
other companies lets that a user continue with her device, by 5 or more years.
an spencive device need to be by more time.
why apple continue selling Iphone 3G? ...

HT4528 Recovery mode after every update.

With every new update, my iPhone 4S goes into recovery mode. Is this normal? After the IOS 7.0.4 update, it took 4 hours to get my phone back working. Am I doing something incorrectly?

I had this problem with my wife's iPad when I updated to 7.0.3 via OTA. It was easily fixed for me, and I assume it should work for everyone else.
It appears that sometimes during installation of the OTA update to 7.0.3, it gets stuck in recovery half way through.
You can connect it to iTunes and restore it, which will wipe it, OR you can download TinyUmbrella and kick it out of recovery. Once you do that, the installer should complete normally (it did for me).
1) Download and install TinyUmbrella for your PC/Mac.
2) Make sure iTunes isn't running and connect your device via USB.
3) Open up TinyUmbrella. Your device should show up on the left. Click on it and then choose "exit recovery".
4) Profit.

Creative Cloud won't recognise my updated payment details after 24 hours. DESPERATELY NEED HELP

I try to open Premiere although it closes and opens the application manager instead, insisting me to update payment details to reactivate my expired plan. SO i did this , and have now done it four times. Every time it charges $1 to my credit card, although after 24 hours from each time it still does not work. Can anyone help me?

You can try with below steps
If you still face same issue , you need to contact Adobe Support and confirm whether the subscription is active or not .
1) Right click on the Finder icon on dock and select "Go-To Folder" option.
2) You will get a text box, type-in below mentioned command and then hit 'Return' key.
/etc
3) It will open the etc folder, please look for file named "hosts" and copy the same to Desktop screen.it
4)Double click on Hosts file , it will open it with TextEdit, If present Delete Adobe entries present inside Hosts file like 127.0.0.1 activate.adobe.com.......etc
5)Copy and paste the Hosts file back to "Etc" folder.
When asked to Authenticate , enter your Mac Password.
Make sure to select "Replace" option when prompted.
Then launch Premiere pro cc and check.
Note: If the hosts file does not have Adobe entries , you can try below steps:
1) Right click on Finder icon and select "Go-To" Folder option.
2) You will get a text box, type-in below command and then hit 'Return' key.( Do not miss ~ symbol)
~/library
3)Then navigate to Application Support>Adobe>OOBE. Open OOBE folder and delete opm.db file.
Once you had deleted opm.db file , launch Creative Cloud desktop application and sign in with valid email ID.
Then launch Premiere pro cc and check.

Update table after every hour

Similar Messages

Maybe you are looking for