Update table which provide information about NAT feature support in Catalyst switches?

Hi,
I'm searching an update table which provide information about NAT feature support in Catalyst switches.
I would like to know if the Nexus 7000 support NAT but my table below is too old -> Updated: Apr 05, 2006.
From my research, it's not possible but i'm looking for an official documentation.
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a008011c629.shtml
Thanks in advance
François

Hi,
No support of NAT on N7ks, see this posthttps://supportforums.cisco.com/thread/2045647
Your table is the latest one I know of so you'll have to look at the switches datasheets to really know but I highly doubt that newer switches not in the table support this feature.
Regards
Alain
Don't forget to rate helpful posts.

Similar Messages

Table which hold information for BW & DB statistics updated for the Cube

Hello SDN,
I want to know is there any table which gives information about all Cubes, for which DB and BW statistics and DB indexes are maintained (and with green light).
Thanks in advance.
Regards,
Yash.

Hi Yash.....
RSDCUBE
Also u can check in Metadata Repository ............RSA1 >> Metadata Repository >> Click on infocube...........there u will get list of all cubes.......
Tcode : RSORMDR
U can also check in table DD02L............In this table u will get list of all tables.....
Regards,
Debjani....

Tables which contain details about queries

Hi All,
I would like to know the database tables which hold information about queries like structure, fields, Query elements etc. Thanks in advance
thanks & regards
satish murthy d.s

try RSZCOMPDIR ??
have a look at tables: rsrworkbook , rsrw*
Re: Where-used list of an attribute (either display or navigational)
Also try : RRMX_WORKBOOK_QUERIES_GET
Re: Query Detailes
Re: Query-InfoObject - Tables
Re: Query Issues
Re: Workbooks - Where-Used
assign points if useful ***
Thanks,
Raj

Which table stores the information about a user (name, username etc.)

Which table stores the information about a user (name, username etc.) .Is it LDAP server or MSSQL server? then hw to go to that table ?

I guess this is a question about CAD - and it doesn't matter much if it's UCCE or Express. The info is in the LDAP called Directory Services. In UCCE the Sync process updates the LDAP from the ICM config database.
You can use a free LDAP browser to connect to the LDAP (anonymous connection) and read the LDAP.
Regards,
Geoff

Provide information about handling units

Plz provide information about handling units. Explain all the paths and information about HU.

Hi,
Purpose
You can use Handling Unit Management (HUM) to reflect packing-based logistics structures in the SAP System. Using this method, you track the movements of entire handling units and the materials they contain rather than tracking each material individually.
When you base logistics processes on handling units, goods movements processing is made easier, which in turn optimizes all logistics operations. This simplified processing includes the existing packing function in shipping and warehouse processing in the Warehouse Management system, which is expanded here.
Features
In the system, the handling unit (HU) expands on the shipping unit. Handling units can be nested, which means that you can create new handling units from several handling units as often as you like. At the material item level, HUs contain the complete material identification, the quantity, and, in the case of serial numbers, the respective object list. Handling units have unique, scannable identification numbers that can be developed according to standards such as EAN 128 or SSCC.
Handling units contain all inventory management information of the materials they contain that are maintained in Inventory Management. There are also status messages that you can call up at any time that indicate whether a handling unit is only planned or if the ship-to party has been notified of the arrival of this handling unit, or whether it is in the warehouse or has already been posted to goods issue. The integrated history function also records each business process in the life cycle of each handling unit, meaning that you can track the handling units path and development at any time.
In HU-managed storage locations, all goods movements are executed through the specification of the respective HUs, and Inventory Management is performed through the handling units. If you are not working with HU-managed storage locations, you can use handling units (without stock information) as before in the delivery and in the shipment.
In HU-managed storage locations, materials can be managed in HUs only. Mixed stock (stock made up of packed and non-packed materials within the same storage location) is not supported. HUs can also be managed in interim storage types. Unpacking a material from an HU means that the stock of the material is posted to a storage location that is not HU-managed.
If you call up normal material movements in connection with an HU-managed storage location, a delivery is created, rather than a direct material posting, which has been the procedure up to this point.
Handling units are unique at client level in at least one system. Using an indicator at client level (see Unique Identification of Handling Units), you can control whether you are going to work with the HU functions. Since the handling unit is a physical unit, the central logistics processes are controlled through the input of the handling unit identification. These processes include putaway, picking, and stock transfers, as well as goods receipts and goods issues.
A handling units mobility can be limited if quality checks are active. Changes in the stock category caused by a quality inspection are made using a posting change in the handling unit.
There is also a report available that you can use to find and display handling units using different selection criteria such as material, packing instruction, or storage location.
Although the handling unit is basically a unit that remains constant in the system, you can change it by repacking the materials it contains. All the packing functions, such as packing, repacking, and unpacking, are completely supported by the handling unit function. In this way, handling units can be created in production, during goods receipt, or in the packing areas of the warehouse. If you have automatic packing, the handling unit is created from the packing proposals defined in the system (from the packing instructions, for example).
Regards
Adarsh Mathur

Table which has info about all "Query views" in the system

hi all,
which is the table that stores information about all the "Query views" present in the system?
i searched in tables RSRREPDIR and RSZELTDIR, but i could not find any query view that is already present in the system.
regards,
Rk

To know execution time, execute the query and then analyze the table RSDDSTAT using t-code se16..
i think u need to check the value of QTIMEOLAP var in the table for getting query execution time..
more info please refer the note 130696
U can execute query in RSRT also after setting options for Statistics

RSS feed just providing information about security updates & new versions of firefox

Hey all
Didn't find any RSS feed which provides just information about new security udpates and versions of firefox.
Does there exist any?
Thanks for you help
Greetings,
Stefan

http://blog.mozilla.com/feed/

Questions about divulging information about future features

Good morning,
I'm making my way through this thread for the first time.
As someone who has passed the California Bar and who has been a stockbroker in the past, I would like to comment on the statement of Steve Forde, who was the Senior Product Manager for Visual Effects for Adobe for portions of 2011.
Steve said,
"Unfortunately - we get stuck in a legal pinch about commenting on ANYTHING that may or may not be in future products, off the record or otherwise."
I'm asking that you consult your internal SENIOR legal counsel again regarding this statement that you assert prohibits you from giving any details whatsoever about what the Adobe Team may or may not aspire to having in future versions of After Effects.
I'm asking this of you for a couple of reasons.
Firstly, no attorney denies that the law changes over time and recent court decisions have made shareholder derivative lawsuits much less popular as a way for the plaintiff's bar to make a quick buck by extorting money from companies who may have made aspirational statements to shareholders or others in conference calls or elsewhere.
As I understand the current trends in Delaware Law, (which, as the situs for quite a few corporations governs large swaths of their conduct) as long as appropriate disclaimers are clearly communicated at the time of the aspirational statement, such language is now permissible.
Such standard disclaimers could include language such as
"we cannot guarantee whether any feature discussed will appear within one year or within five years or whether it will ever appear at all. It is currently a goal of the design team to reintroduce this feature, but we reserve the right, in our exclusive discretion to change that decision for any reason whatsoever, without consequence.
Additionally, you are vested with no rights to rely on any assertion or representation made based on any such aspirational statement and we insist and demand you consult an attorney before embarking on any course of conduct, such as purchasing stock or altering any current or projected business plan, based in any manner upon what we say here.
However, given the above caveats, it is the current goal of the Adobe design team to reintroduce this feature within the next three releases of AE again, subject to change at our sole and exclusive direction in any manner, time or mode of our choosing, without prior notice of any kind."
If you had a standard disclaimer such as the above that you attached to any and all such statements (by having it appear within the signature block of any Adobe employee posting to this forum), it could take conversations such as this to a more rewarding level for both Adobe staff (who could share their very profound dreams and aspirations with us) and the Adobe community at large, which provides inspiration and helpful feedback to Adobe employees seeking to assist us.
Then the focus could shift to whether or not you were divulging trade secrets. But it would still permit you to be more informative in a general way.
So I ask that you run this by your SENIOR legal counsel again. Remember, just as there can be different ways to tackle the same 3D graphics animation challenge, each with rewarding results, attorneys similarly can vary from attorney to attorney and new and bright ideas on how to approach such issues do occur from time to time, especially in light of the massive favorable swings in case law supporting the rights of massive global corporations such as Adobe viz a viz the rights of the little guy.
Sincerely, Matt Dubuque
Here is Steve's quote in its entirety, from May 26, 2011:
Unfortunately - we get stuck in a legal pinch about commenting on ANYTHING that may or may not be in future products, off the record or otherwise.
That being said, as Michael explained in a previous post, Vector Paint got stuck in the conversion of AE to 64 bit. It's something we hear quite a bit from our users that Vector Paint is important. Again - wish I could give you more than that, but we are bound by very strict rules.
Therefore - it is important to us, and the more we hear via this form the more likely it is to get resources behind it in a future release. Again I realize it is impersonal, but the results of this form are sent via email to a real human every time someone hits submit; then that person brings the results of submission to a weekly meeting on the AE team where we discuss features and scheduling.
Steve
Sr. Product Manager - Visual Effects
Adobe Systems Inc.

Attaching an appropriate disclaimer may be fine for an attorney to dot all the i's and cross all the t's, but there is one thing it will NOT do: it won't stop people from misinterpreting what they read.
Most people go by what they PERCEIVE to be true and not the ACTUAL truth, a fact that people in marketing like me deal with all the time.
Steve Forde might write the following totally hypothetical and totally fictional line in a blog:
"We're thinking about a feature for a future version. Right now we call it the Clean Plate Generator. You would be able to shoot a single clip, panning and tilting the camera as desired, and After Effects would automatically create an image whose total size matches the totality of the image shot in the clip. It would even remove selected foreground subjects such as a stray person who inadvertantly walks into the shot."
Sounds great, yes? And with your proposed disclaimer, all would be good; Adobe would have covered its corporate pink posterior. Or would it?
Do you wish to speculate how many people would read that as a statement of a definitely-going-to-be-there feature in the next AE version?
Can you imagine the can of worms that would open when this fictional feature isn't in the next version?
Would it really be worth the massive and expensive fence-mending campaign Adobe would have to undertake among angry users who were erroneously looking forward to this fictional feature?
All of which could have been avoided simply by not saying a word?
I can see where attorneys may like a hypothetical situation as the one above: they could charge more billable hours! I doubt Adobe would like it, however.
Legalese is one thing, maintaining happy customers is another, and there is no amount of legalese that can overcome people's nasty tendancy to perceive what they read as what they WANT to read instead of what is actually written.
If people would read what was actually written, there would be far fewer posts in this forum that say in essence, "Hey, how come it takes two weeks to render ray tracing on the brand-new HP student laptop I just got from Wal-Mart?"

In what table are stored information about BOR objects

Hi Gurus,
I have to find all objects like classes, function modules, reports and other related to BOR objects. Let say that I have BOR object type. With this information where can I find information about it? In which table this information are storred?
Best regards
Marcin Cholewczuk

Hi ,
SWOTDI Definition Interfaces
TOJTB Business object repository: Basic data
u can use search help in SE11 with table name equal to TOJ*

Table that stores information about function module

Hi All,
I know that table TFDIR stores primary information about any function module.
Could anyone tell me where the code of that function module gets stored in?
Also.. If I want to write an ABAP code to read the function module code then what is the best possible solution?
Thanks in advace and any answer will be appreciated.
Regards
Jignesh

Hi All,
Apologies for the same!
The codes are not stored in any table, they are stored as cluster.
To read the code, you can use READ REPORT.
But there you must provide the Include Name For Example , If you want to read the code of READ_TEXT,
READ REPORT 'LSTXDU01'.
You can get this include name inside include LSTXDUXX
Table TFDIR also stores the program name and include number.
You need to truncate first 3 char 'SAP' and append UXX at the end and that will be your program name.
Then we can use READ REPORT!!!
Regards
Jignesh

Timeout occuring running a report which displays information about users

Hi,
I developed a report using JSPDynPages which displays the following information about all the users in a particular Group.
1)Uid
2)FirstName
3)LastName
4)EMail
5)Account status (active/locked)
6)R3 UserName
In the group for which i am running the report consists of about 4,500 users and the report is getting timedout.
My logic in the code is to iterate through all the users in the group and collecting their information and populating a array which will then be given to the DefaultTableViewModel to display the info in a tabular form.
Obviously this process is taking more than the predefined timeout time (i guess it is 1 min) and hence the timout is occuring.
Can anyone suggest a solution to this problem (other than increasin the timeout param).
Thanks in Advance,
Sudhir

Could you tell me how to display the first name and last name in a Bex Analyzer. I want the user to see their name when they log into the report screen.
Please help.
Regards
Anita

How to update table which has column name as Oracle keyword?

Hi All,
Somebody has created one table which has column name as "OPTION", now i am trying update this table column value and its throwing an error. "Invalid Identifier".
Could you please help me in this?
Thanks in advance.
Regards,
Ganesh Patil

check this :
batch@DOLN1> create table "from" ("select" varchar2(10));
Table created.
batch@DOLN1> desc "from";
Name Null? Type
select VARCHAR2(10)
batch@DOLN1> update "from" set "select" = 'hello World';
0 rows updated.
batch@DOLN1> insert into "from" values('hello World');
insert into "from" values('hello World')
ERROR at line 1:
ORA-12899: value too large for column "TCM_BATCH"."from"."select" (actual: 11, maximum: 10)
batch@DOLN1> update "from" set "select" = 'hello';
0 rows updated.
batch@DOLN1> insert into "from" values('hello');
1 row created.
batch@DOLN1> commit;
Commit complete.
batch@DOLN1> update "from" set "select" = 'World' where "select" = 'hello';
1 row updated.
batch@DOLN1> select * from "from";
select
World

How to get informed about new features and version...

Hello,
I used to get informed on skype when a new version is launched, but now I dont. I noticed it when I delete skype and re-install again from the site for a reason. Also I want to learn about the new features via e-mail. What should I do?
Regards

To manually check for new updates, you can click the Check Update option in the Help menu in the Skype software window. Then if there are new versions released and you want to know what new features are added in that release, you can check the Skype Blog's Garage section -
http://blogs.skype.com/category/garage-updates/
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES

Tables that provide information on infoproviders

HI ,
I need a table in BW/BI system which must have details of the infoproviders
1) How often they are loaded ?
2) whether been used in reports?
It is OK if the information is spread across multiple tables
Thanks

Hi
For Infoobjects
InfoObject
RSDIOBJ     Directory of all InfoObjects
RSDIOBJT   Texts of InfoObjects
RSDIOBJ   Directory of all InfoObjects
RSDIOBJT Texts of InfoObjects
RSDATRNAV Navigation Attributes
RSDATRNAVT Navigation Attributes
RSDBCHATR Master Data Attributes
RSDCHABAS Basic Characteristics (for Characteristics,Time Characteristics, and Units)
RSDCHA
Characteristics Catalog
RSDDPA
Data Package Characteristic
RSDIOBJCMP
Dependencies of InfoObjects
RSKYF
Key Figures
RSDTIM
Time Characteristics
RSDUNI
Units
For InfoCube
RSDCUBE Directory of InfoCubes
RSDCUBET Texts on InfoCubes
RSDCUBEIOBJ Objects per InfoCube (where-used list)
RSDDIME Directory of Dimensions
RSDDIMET Texts on Dimensions
RSDDIMEIOBJ InfoObjects for each Dimension (Where-Used List)
RSDCUBEMULTI InfoCubes involved in a MultiCube
RSDICMULTIIOBJ MultiProvider: Selection/Identification of InfoObjects
RSDICHAPRO Characteristic Properties Specific to an InfoCube
RSDIKYFPRO Flag Properties Specific to an InfoCube
RSDICVALIOBJ InfoObjects of the Stock Validity Table for the InfoCube
ODS Object
RSDODSO Directory of all ODS Objects
RSDODSOT Texts of all ODS Objects
RSDODSOIOBJ InfoObjects of ODS Objects ODSOATRNAV Navigation Attributes for ODS Object
RSDODSOTABL Directory of all ODS Object Tables
Hope this helps
Regard
Shilpa

Where is the best place to see videos and other information about the features in the ipad

I keep hearing about the 200 new features in the IPad 2 where can i find all 200

Some of them are for developers and is not surface into the UI. But anyway here is a place to start:
http://www.apple.com/ios/features.html

Update table which provide information about NAT feature support in Catalyst switches?

Similar Messages

Maybe you are looking for