Update teminated message after releasing and saving PO

Hello Friends,
After releasing and saving PO in ME29N ...when pressing BACK button...i am getting a pop message with "updated terminated".
then i enter...in inbox the below message i am getting.
System ID....   DEV
Client.......   600
User.....   ABAP
Transaction..   ME29N
Update key...   BAC6150D3B4CE853F588CFC55F23
Generated....   17.04.2007, 11:08:13
Completed....   17.04.2007, 11:08:53
Error info...   00 671: ABAP/4 processor: PERFORM_TOO_MANY_PARAMETERS
Even I debugged ...with break point satement with 'message' but not able to capture the "updated terminated'.
Let me know how to sort this bug??
With Ever Smile & Warm Regards,
Madhu..!!

Hi,
Go to ST22 Transaction and Analyse the DUMP of this clearly in detail
and discuss the same with a MM functional consultant and solve the issue.
reward if useful
regards,
Anji

Similar Messages

Update XDP datasets after fillong and saving static forms

Hi all,
I've got many static XFA forms, which does not behave the same way after filling-in and saving in Acrobat. Mosto of them updates the XDP datasets entry inside the XFA, but some of them does not. The result is, that after extracting the XDP from the pdf Form, the datasets contains just the default values and not the filled-in values.
Are there any rules for updating the datasets entry shen saving filled form?
Thanks for any help
Jozef

Hi all,
I've got many static XFA forms, which does not behave the same way after filling-in and saving in Acrobat. Mosto of them updates the XDP datasets entry inside the XFA, but some of them does not. The result is, that after extracting the XDP from the pdf Form, the datasets contains just the default values and not the filled-in values.
Are there any rules for updating the datasets entry shen saving filled form?
Thanks for any help
Jozef

Hi, i was recently on an IOS 7 update before it's release and downloaded it from the web and i just got this message saying that my device is not registered as a part of the iphone developer. i have been using this for about 2 months now. what is a fix?

hi, i was recently on an IOS 7 update before it's release and downloaded it from the web and i just got this message saying that my device is not registered as a part of the iphone developer. i have been using this for about 2 months now. what is a fix?

Were you running iOS 7 beta? If so, as a developer you need to log into the Developer forum for assistance.
Not a developer and running iOS 7 beta? <edited by host>

Process Orders, send idoc (LOIPRO) when its released and saved.

Hi ,
Here is my requirement.
For process Orders, send idoc (LOIPRO) when its released and saved. (COR2).
Here are the options I have tried.
- Create an enhancement spot after the commit statement, and submit RCCLORD
For some strange reason Submit to RCCLORD isn't working. Even I have tried to execute it independently, It isn't working properly. It is working fine from POIT, but not independently...
- Call CLOI_MASTERIDOC_CREATE_LOIPRO function module, but for this I have to get all the related data into proper tables, and I am not sure if it works either.
I have searched here in SDN to for some help, the closest thread talks about creating a ZFM for IDOC creation, but I dont have much of the details of that.
Re: Process Orders, send idoc (LOIPRO) while creation/modification(COR1+BADI)
Need some help on this.
Thanks & Regards,
Kalyan Venigalla.

Hi!
not sure, but maybe it will help you:
RCCLORD have code with check already sent orders
Try add this code before submit RCCLORD
* -> free global table for collecting order numbers
free memory id 'LOIAUFNRTAB'. "

Update to the new release and firefox hangs and becomes unresponsive each time I try to open it. I have tried removing firefox from my pc, restarted my pc. went to Google Chrome and downloaded it again. Still hanging. Please help

Update to the new release and firefox hangs and becomes unresponsive each time I try to open it. I have tried removing firefox from my pc, restarted my pc. went to Google Chrome and downloaded it again. Still hanging. Please help
I can open Google Chrome and IE without any problems. My new version of Thunderbird won't let me see messages.

So i have just unistalled itunes logged on to apple to try and download the itunes prog ,but it dont seem to have downloaded.can anyone help me please.
Could you walk us through what happened when you tried to do the download, please?

How can I clear a form after submitting and saving the data in the iOS Acrobat Reader App

How can I clear a form after submitting and saving the data in the iOS Acrobat Reader App

Darrell,
Thanks for this response. After I posted mine, I saw that the resetForm JavaScript method is documented as being supported starting with version 10.5: http://www.adobe.com/devnet-docs/acrobatetk/tools/Mobile/js.html
But I haven't been able to get it to work. Can you clarify if support was indeed added and if it works for you?

How to process an output message after pick and pack in LM46?

Hi,
I've implemented the User Exit to print the HU using LM18, it's working great but no output message is processed (and indeed, the sticker is printed on my own printer instead of the one defined in my Z custom output message).
I used LM46 to pick and pack the HU, am i missing a step?
In other words, how to process my custom output message after the pick and pack?
Is there some code I must add in the LM18 User Exit?

You know, in a user exit or a BADi you can access any variable of the program you want.
Just find what which program calls the Exit User, put a break-point in it, and find the variable you need to access.
Then add this kind code in your Exit :
DATA: l_var TYPE ....
FIELD-SYMBOLS: <fs_var> TYPE ANY.
ASSIGN ('(PGMNAME)variable') TO <fs_var>.
IF sy-subrc = 0.
l_var = <fs_var>.
ENDIF.
Same thing for a table :
DATA: lt_var TYPE TABLE OF....
FIELD-SYMBOLS: <fs_var> TYPE ANY.
ASSIGN ('(PGMNAME)table[]') TO <fs_var>.
IF sy-subrc = 0.
lt_var[] = <fs_var>.
LOOP AT lt_var ASSIGNING ...
ENDLOOP.
ENDIF.

Object locked after Release and Transport to QAS/PRD

During an attempted recovery of our DEV system, a tranport request that had been previously released and transported to QAS/PRD was copied back into the DEV system, over-writing an open change request (and associated lock) on the program.
As a result the object shows as 'Locked' in DEV, but the lock entry is on a 'Released' transport.
I have reviewed tables E070 and E071, and as expected the entries for the program show that the transport was released.
Table TLOCK contains an entry for the program indicating that it is locked under the change request described above, that has already be released.
I logged a message with SAP, and was directed to create a new change request and assign the program to that request. While this does work, and allows me to make corrections and transport them, it does not assign a lock to the new transport, and does not clear the existing lock.
The other comment in the message was that once a transport is released, the only other option is to 'hack the tables', but I am not sure I am ready to go that route.
Has anyone ever encountered this situation, and if so, do you have any situations as to how to clear the lock entry ?
Thanks in advance for any assistance you can provide.
R. Runtz
SAP Support, Government of Manitoba

Hi Robert
You can unlock objects using transaction SE03:
SE03 > Requests/Tasks > Unlock Objects (expert tool)
Imre Takácsi-Nagy
Senior Support Consultant II.
SAP Global Support Center Austria
Netweaver WEB Application Server ABAP / JAVA

Po change after release and printout

Dear Experts,
My client require if we change the PO in any field ( expect qty and amount ) our po should be go in the po release again we using release indicator 4 and 6 but we want release should be go if we change any field like date tax code text payment terms etc.
RCR

Hi,
System determines new release strategy only if there are any changes in the characteristic values in the PO. (The characteristics that you must have defined for the PO release strategy configured in your case, like PO value, document type, Plant, etc.)
By your question, it appears that you do not want to change even the date and text fields after PO is released, and in case you do the changes, then again the PO has to be released.
For this, you need to use the release indicator, which won't allow any changes after PO is final released. Hence, when any of the field is required to be changed, the release will be required to be cancelled first, then the changes can be done. After doing the necessary changes in your fields, like, date, text, etc., PO will again be subjected to release, and will have to be released again to proceed further.
Regards,
Zafar.

HT1925 Message after removing and trying to reinstall itunes 'The system administrator has set policies preventing this installation'. Can anybody help?

After removing and reinstlling iTunes .....message reads 'the system administrator has set policies preventing this installation'

Try the following user tip:
"The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

Error message after downloading and install rolled back (using up data limit)

error message after completing install of trial. then program was rolled back. I do not appreciate using up data allotment unnecesarily, people.Thanks for any assistance.

Rhumsike which Adobe software or service are you trying to install? Also which operating system are you using? Finally what is the error message which you are receiving?

Why do I get a loss of quality video when placing titels or grading in FCE. Even after rendering and saving to the final product? The video starts to get shaky

Whenever I place a title in my video in FCE, the part where I placed it losses its quality. Its getting shaky and blurred.
Even afther rendering and saving it to the final end product. The same problem occurs when I'm collor grading. I use the internal tools for titels and grading of FCE.

and some more specs;
My systsem >>
IMac 3.06 GHz Intel Core 2 Duo
8 GB 1067 MHz DDR3
clips and master on Imac
Scratchdisk on external disk with firewire 0.8
On both disks I have more tehn 0,5 TB geheugen left
Videocamera HF 100
Imported clips >>
- FXP 17 Mbps
For RT I use >>
- RT Unlimited
- Playback Video Quality high
- Playback framerate high
Videoclip =
- videorate 25 fps
- framesize 1920 x 1080
- compressor apple intermediate codec
- pixel aspect square

IPhone not showing contacts names in text messaging after sync AND reset

Three days ago, I bought the iPhone 4S as an updgrade from the 3GS. I also transferred my wireless service plan from AT&T to Verizon. Since doing that, very strange things are happening. For example, my contacts appeared to transfer without a problem, but whenever I attempt a call to a number that does not have a "1" stored in front of it, it tells me that I am attempting a long-distance or international call and the call won't go thru unless I place a 1 in front of the number and store it that way. Also, whenever I send text messages and someone replies, their message comes back to my phone under the phone number only and not the name that is stored in my contacts. This happens even when the contact sends a direct message to me that is not a reply. (Imagine all the "Merry Christmas" messages I received yesterday that I have no idea who they were from, except the 5 out of 300 contacts whose numbers I have memorized!!) I have gone to the Apple Store and the "Genius" there reset my phone, which temporarily fixed the problem, but now it is back. I did a soft reset, now it randomly selects which names will show up in my text message window. (For example, yesterday, the name "Jane" shows a message that says "Merry Christmas", but after the reset, only Jane's number shows up in the text screen with the same message from yesterday.)
Does anyone know what in the world is going on?? This is Very Annoying! I'm tempted to go back to AT&T, as I am being told that the iphone technology, even for 4S, is not as compatible on Verizon as it is with AT&T. Please help!

Not sure about the random contact name problem. I suspect a bad database. Use iTunes to delete and replace your contacts with a good list. If that doesn't work, do a 100% software reset and don't restore a backup, setup as a new device. Finally, if that fails go back to the apple store. The issue is not software fixable and the unit should be replaced.
The other issue with 1 dialing required... are you roaming? Disable wifi, should say Verizon 3G in the status bar.
When you are off your home area cell network, you are not dealing with Verizon directly.
Edit: your last question about using a Verizon 4S on AT&T's network. You are correct, out of the box the Verizon 4S is locked to only work on Verizon's network. The AT&T 4S and Sprint 4S have the same locks. You can purchase an unlocked iPhone directly from apple. I've also heard of people convincing Sprint customer service to unlock their phones for use out of the country,

Updation of table after Print and Print-Preview in smartform

Hi,
I am having a requirement where i need to print multiple deliveries with the sales order data each delivery on a new page using smartform.
Now , i am using SSF_OPEN, SSF_CLOSE Fm's for the same. I need to update a Z table after the user clicks on PRINT from the pop-up or print from the print preview screen.
I tried using the output_info parameter in the smartform where i read from a post that the OUTPUTDONE parameter becomes "X" in the job_output_info when the user clicks print wither in the two ways said before.
This does not work out in case if the FM'S SSF_OPEN and SSF_CLOSE are used.
Kindly help me on the same.
Thanks in advance

yes i tried that..using the AT new event for a Delivery and then a command to go to the NEW PAGE, but somehow when i execuet the form, i could not see the layout..so in the debug i saw the subrc after the FM is run..it says SUBRC = 2 i.e. internal error. I am not able to figure that out.
So i had to use these open and close, nowi just want to update a z table if the user clicks on the print button (print preview screen) after using the print preview .
Kindly suggest.
Thanks.

Signature is invalid after signing and saving

Hi,
I've been messing around with this problem for days and I don't find a solution.
I've a PDF document I created in LiveCycle Designer ES 8.2. This document will get populated with data from an XFDF file. After that, user can input data and data will be retrieved via Webservices too.
After finishing, the user has to sign the document and then it will be saved back to the server with a submit function.
When I reopen the signed document (or even after I click "save" without sending back to the server and reopening it), the signature is invalid. When I click on "Compare signed version to current version", I get the report "The pages are identical" and when I close the report, the signature isn't invalid anymore. Acrobat then writes: "At least one signature requires validating".
There are some JavaScript functions in the document which may cause the problem, but I already eliminated most of them, with docReady events, so they won't be executed on start.
Is there a way to debug the PDF document?
I've found some debugging hint on the internet from 2003 or 2004, but I can't even find the menus right now, so I think, there must be a new way for this in Acrobat 9.
I hope, someone can help me, this problem really drives me crazy.
Thanks.
Fritz

Hi Fritz,
In the interest of full disclosure, I got the answer to the problem from one of my distinguished colleagues, I'm just the messenger in this case.
The problem is that the form adds some items to the Arzneispezialität / Zusatztext combobox which are there during signing but the form doesn’t remember that it did this on the next form open.
Since this field is included in the MDP+ signature and the field has changed in the re-opened version vs. the signed version, the MDP+ signature becomes invalid.
XFA has a feature that remembers these kinds of things for you but it is turned it OFF. Please open the attached screen shot to see the control in question.
So, you can either (1) turn this feature ON (Automatically), or (2) write some script to clear the combobox items prior to signing or (3) write some script to repopulate the combobox items on the subsequent open to match the items that were there during signing.
Steve

Update teminated message after releasing and saving PO

Similar Messages

Maybe you are looking for