Update termination error while doing PGR
Hi,
I got this error while doing PGR, please do suggest the dolution.
Update was terminated
System ID.... DPT
Client....... 900
User..... SDUSER
Transaction.. VL02N
Update key... 4BEAA8A2A6DA0609E1000000AC1107A7
Generated.... 12.05.2010, 18:38:55
Completed.... 12.05.2010, 18:38:56
Error Info... Update program: I/O error Error; function Update, RC= 4, key
Thanks,
Swapnil
Hi Lakshmipathi,
I have checked the analysis in SM13, got the folllowing,
Function Module SERIALNUMBER_POST
Status Update was terminated
Report LIEP1U01
Row 159
Error details Class: IS Number: 229
Update program: I/O error Error; function Update, RC= 4, key
Similar Messages
-
Update terminated error while doing changes in sales order
Hi
We had found below error message while trying to save a sales order
RV_sales_document_update
Report-LV45UF0V
Row 265
Error details-SAPSQL_ARRAY_INSERT_DUPREC-671
This had happened for 2 sales orders alone..
"SAPSQL_ARRAY_INSERT_DUPREC" "CX_SY_OPEN_SQL_DB"
"SAPLV45U" or "LV45UF0V"
"VBEP_BEARBEITEN"
We are not using any user exit for VBEP...
Can u please tell us how to overcome this error
Regards
SudhaHow was it solved ? I have the same Issue.
<< Moderator message - Everyone's problem is important. But the answers in the forum are provided by volunteers. Please do not ask for help quickly. And consider opening your own thread on this >>
Thanks
Abhinav
Edited by: Rob Burbank on Jan 12, 2011 4:08 PM -
Termination error while doing me31k
HI Experts,
This is the sincere apology for the previous thread which was in capital letter subject" termination error while doing me31k
Posted: Mar 6, 2012 2:56 AM
HI while performing transaction ME31K I'm getting follow error
Runtime error: DYNPRO_NOT_FOUND
What Happened?
Error in the ABAP application Program
The current ABAp program "SAPLXM06" had to be terminated because it has come across a statement that unfortunately canont be executed.
Error Analysis
The system attempted to use dynpro 0201 in program "SAPLXM06".
This dynpro does not exist.
Trigger Location of Run TIme Error
Program: SAPLXM06
Include: MM06E00C_CUSTSCR1_HEAD_SET_DAT
ROW: 10
There is a Edit button, that allows you to change the subject
Edited by: Jürgen L. on Mar 6, 2012 8:41 AMDear MM user,
Follow the documentation of this enhancement (see transaction SMOD):
Within the documentation of enhancement MM06E005, via TA SMOD, it specifically states that if you use the enhancement you must generate six listed dynpros (screens), even if you are not using them.
So you may goto transaction CMOD and enhance the same.
For example, the dynpro area should be like the following:
Calling screen No. Area Called screen No. ShortTxt
SAPMM06E 0101 CUSTSCR1 SAPLXM06 0101 Subscreen: PO header
SAPMM06E 0111 CUSTSCR1 SAPLXM06 0111 Subscreen: PO item
SAPMM06E 0201 CUSTSCR1 SAPLXM06 0201 Subscreen: agreement
Regards,
ian Wong Loke Foong -
Update Termination Error while creating Delivery
Hello Experts,
I am trying to create delivery with reference to Standard Order when I click on SAVE I am getting message that delivery is being created. But when I am trying to open the same delivery in change mode I am getting Update termination Error saying delivery not created.
So what I tried doing is while creating delivery I have given Picked quantity and done with PGI then i am able to save the Delivery successfully and table LIKP is also updated. But this is not always that I can do. In my production system, without doing PGI I should able to save Delivery.
Please could anybody help me on this ..is there any SAP notes?
PS: My system is upgraded from ECC 6.0 Ehp2 to ECC 6.0 Ehp7.
Many Thanks in advance.
Priyanka J.Hello Kiran, Hello Klaus,
Below are the details;
Function Module
RV_DELIVERIES_SAVE
Status
Update was terminated
Report
LV50UF0L
Row
50
Error details Class:
00
Number:
671
Internal session terminated with a runtime error POSTING_ILLEGAL_STATE
MENT (see ST22) -
Update was terminated error ,while doing PGI
Hello All,
While Posting Goods issue for a Delivery we are geeting -Update was terminated error.
When Analysed in SM13 ,it shows error message as :-Error Info... C4 001: Value "03/09/2010
Checked for various dates in Delivery ,Sales Order & delivery both created after 9th march 2010.
Please advice ,if someone have encountered same kind of issue .?
Do we have way to find clue to error through update key.?
Update key... 4BA0B325C79F00BEE10080009974E162
Regards,
VikasHi Vikas,
This is Basis issue, you need to talk with the basis team.
They will clear this issue.
Hope it helps,
Regards,
MT -
Update Termination Error while modifying PO in ME22n
Hi All,
I am facing one problem,while modifying the PO using ME22n.After modifying the PO when I save it ,Express Document "update was terminated" error comes.
Can anybody please guide me on this, why it is happening .It's very urgent.
Thanks in advance.Hi
Check the following link:
http://www.sapfans.com/forums/viewtopic.php?p=822485&sid=253f8b02796c0b390a5180b3d1a86661
Though not relevant for PO......the basics are same.
Regards
Aravind
Assign points if useful -
Update termination error while parking multiple items using BAPI fn module
hi experts,
i am facing a problem with bapi_incominginvoice_park.when i am trying to park invoice for single item for the po the invoice number is generating and getting updated in database in the same way when i am trying to park for multiple items the invoice number is genrating but not getting updated in database table.Here i am getting error 'Express document update terminated BY THE user'.How to solve this problem to find these error i have gone to se13 transaction,there it is showing SAQCL_DUPRC.it is saying duplicate errors in table but there are no duplicates in table.
Thanks,
Vinodhi vinod ....i tried the following it worked...
while sending tax info dont send any tax table manually i.e updating the vit_tax table using append statement
also while testing function module for multiple PO , no need to provide the tax info in the tax table
what we have to do is only to provide 'X' In the tax calculation option in the header details
HEADERDATA-CALC_TAX_IND = 'X'.
1.this will enable tax
2. will make the po status green so that the parked document can be posted . -
Update terminated error while saving in VA22
Hi,
I am trying to change the quotation in va22 transaction.
What I am doin is I am selecting all the items in incompletion log and filling to make the document complete.All the items have ben update with out error but there is field your reference (vbkd-ihrez) while entering data and saving it is showing document is complete but when you again check the incompletion log it is giving the following error.
Update was terminated
System ID.... PRO
Client....... 401
User..... SAPUSER
Transaction.. VA22
Update key... 4BBE3BCBE2C1216BE1000000C0A80118
Generated.... 09.04.2010, 17:53:04
Completed.... 09.04.2010, 17:53:06
Error Info... Application area: /SMB40/SSFCOMPOSER , message no.: 002, no entry found in T100
Please help regaring this.
Thanks.hello ikshaik
there might be problem in smart form of quotation remove the output message type and the try to save it
Thanks
Nilesh Gaikwad
Edited by: Nilesh Gaikwad on Apr 10, 2010 12:13 PM -
Update termination error while calling FM in Update task
Hi Friends,
I am calliing my Z Function Module in update task from my report, my function module contain reuse alv list display fm which should create a Spool in the spool list.
When ever i am directly executing my Z function module i am getting spool in SP01, but when ever i am calling the Z Function Module in update task from my report i am getting a message as "Express document "Update was terminated" received from author.
I want to call the Function module in update task and it should generate spools .
Syntax:
CALL FUNCTION 'ZLOK_TEST' IN UPDATE TASK.
Commit work.
Thanks Regards,
Sandipan jenaHi sandipan jena,
a function called in update task will not create a spool list if not told so to to. Only reports scheduled in a JOB will put the output into spool.
Make sure you have no COMMIT WORK and no MESSAGE output when in UPDATE TASK. You can enter /h and in debugger switch on UPDATE debugging. This will lead you to any error occurring.
You should analyze the errors you get. Mabe NEW-PAGE PRINT ON can help you.
Regards
Clemens -
Error while doing PGR (post goods issue for sales order return)
Hello Gurus,
I'm trying to do PGR for a sales order return. But system shows the following message: "Shortfall below the specified stock level or quantity amounting to 100 UN". (Message number : M7021)
I've made some searches in SD forum but I didn't fnd appropriate answers.
What does it mean ? How can I fix it ?
Thank you,
Bahia.Hi
"Special Stock E not supported (check your entry)".
This means your sales order (in your case the returns order ) is created with an item category which is marked with special stock indicator E in VOV7 and the system is checking for that special stocks and it is not finding that
When you mark any item category with special stock indicator it can be E or Q or W ( it can be anything ) system will check for that particular stock category and not the general unrestricted stocks
For you mistake can be two things
1. Right now REN or RENN is wrongly marked with special stock indicator E in VOV7
If so remove that and try a fresh cycle
2.The process you are right now doing is returns
The original sale would have happened with special stock indicator E marked in its item category
That means it is special stock
That stock you might be trying to take it into general stocks now
In that case right now you need to mark REN or RENN with special stock indicator E
Note whenever you put your hand in VOV7 create a fresh order cycle and test and dont test it with already created order
Note touching requirement classes are all big things to do in a project and not advisable lot many mistakes we can correct itself if we know order type ,item category and schedule line category
Regards
Raja -
STATUS_UPDATE error to update USER STATUS - Update termination error
Hi All,
I am using status_update FM in sales order user exit MV45AFZZ in a perform routine for updating user status in line item for sales order. There are 4 custom statuses created for the sales order line item. 1,2 3, and 4 by configuration. My job is to select one of those based on user selection.
Scenario: During change order process using VA02, I have to change the existing status to a third status when user selects the second one. That is for example, in VA02, user selects status 4 from previous status 3, and save, I have to make the status 4 inactive and save the new status 2 instead of 3 though user selected 3. How do I achieve this.? ????Any programming example is really appreciated. Thanks!!!
I am right now using STATUS_READ and reading the existing status 4. Then making it inactive using status_update FM. And updating the new status 2 as active one and 3 as inactive again. Two inactive updates and one active update is throwing an update termination error while saving the sales order.
Any help is really appreciated.
Thanks
RickyHi ricky,
For saving any changes you need to have a Z-table.
In programs we can't store the user selection. In your case you can create a z-table and store the status there and delete the last status. The process would be faster as you will always have one record in the table.
. One more advantage is you can even track the changes through the Z-table(User who is changing it.)
Hope this solution will surely help you.
Cheers
Suvi -
"Storage unit 200200557 is without appendant HU" while doing PGR
Dear All,
I am getting the following error while doing PGR using inbound delivery. Actually i packed the material with this Handling Unit using an inbound delivery. Now i am trying to PGR to move the stock to HU Managed storage location. During this step it is giving this error. Can anybody help???
Regards
Rajitesh PandeyHi Rajitesh
There is a separate blog for LE and ECC WH. You will get ans quickly there.
Regards
Suraj -
Error while doing Challan updation
Dear all,
Iam getting error while doing Challan updation, system shows an error saying "No line Item exist for Challan updation" whereas iam having all the data but the system is not picking.
pls help on this
will get a good points for solving thisI understood ur problem, u r running the J1INCHLN when u r running this program . Program chks both the Table BSEG & WITH_ITEM they 2 field from BSEG-BUZEI & WITH_ITEM -J_1IBUZEI . if this 2 line item is not matching then system will show the same error which u have mentioned.
Whether this has occured first time or rarely it occurs, if first then just update the table WITH_ITEM for the field J_1IBUZEI with respect to BSEG-BUZEI for the TDS line item only. Make the changes with help of ur Internal consultant. write an update program. -
Getting Error while doing Control Panel - Windows Update Error code is 80070103
Getting Error while doing Control Panel -> Windows Update Error code is 80070103. The optional Windows 7 update is
Microsoft - Other hardware - WinUsb Device
Please provide your email ID to send the Error screen shot.Hi!
Check the following link to see if it solves your problem:
http://support.microsoft.com/kb/952032
Best regards
Andreas Molin
Andreas Molin | Site: www.guidestomicrosoft.com | Twitter: andreas_molin -
Error while doing J1IH (Excise JV) - TR6 Challan posting
I am getting the following error while doing, J1IH (Excise JV) - TR6 Challan posting
Please assist....
Short text
The COMMIT WORK processing must not be interrupted.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLFACS" had to be terminated because it h
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
During the COMMIT WORK statement, the following are executed:
- the routines registered with the statement PERFORM .. ON COMMIT,
- the registered methods for the events of the object services
and
- possibly the local update (SET UPDATE TASK LOCAL).
An exception was raised and caught. The normal sequence of the routines
was interrupted by this resulting in the program being continued before
the call of COMMIT WORK. As this can lead to inconsistencies, the
processing cannot be continued in the normal way.Thanks Milind...
I am also getting the following error:
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following
details:
Exchange rate '00', amount ' 500,000.00' and currency key 'INR'.
The data in the transaction currency were transferred from the calling
application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Please assist
Maybe you are looking for
-
Configure Mozilla in Solaris 10
I new in Solaris , the browser Mozilla does not recognize URL for example when I put www.google.pt browser tell me that (does not find the url). I logon in internet becouse the ping command is sucesseful , and I can enter in my router with (private a
-
Can you clone Remote System key mappings?
We have 2 Remote Systems set up for our MDM repository with key mappings for 60 tables. I now need to add an additional Remote System which is similar to one of the existing ones, but with a few different values. Is there any way I can clone the exis
-
Hi, I`m using Acrobat to make a large portfolio (about 3 gig) involiving tiff pages of textg and films, but when I click on the Acrobat inserted links when viewing the file in Reader, the screen goes blank blank back to the top menu bar: any ideas as
-
BT Inifinity 2 issue - BT given up?
After getting consistently good results from Bt Infinity I decided to apply for Infinity 2. I placed the order and about 5 days later my modem disconnected and re-training seem to take place over a few days. On Infinity 1 - approx 36Mb down and 6Mb u
-
Should I upgrade to Yosemite or wait?
I'm ready to upgrade to Yosemite if it's ready for Prime time. Any comments? Should everyone upgrade or wait for a few revision fixes?