Update termination in ME29N

Hi All,
I am getting an update termination mail to my sap mail box when I am trying to release one purchase order. " Error info... SO 451: Address <&> does not exist " (from mail) What might be the reasons?
Thanks in advance
jaison.

Please let me know if work flow is enabled in your system.
For some of this type of messages there are some SAP OSS notes available,
Pls check in service.sap.com

Similar Messages

Update termination in ME29N (Release PO)

Hi All,
I am getting an update termination mail to my sap mail box when I am trying to release one purchase order. " Error info... SO 451: Address <&> does not exist " (from mail) What might be the reasons?
Thanks in advance
jaison.

Hi Martin,
I checked in SM13. Error occured in function module RV_MESSAGE_UPDATE. Executed the transaction ME29N after putting break point in the function module. Flow control is not coming into RV_MESSAGE_UPDATE.
Regards
Jaison.

When releasing PO error occured Express Document " Update Terminated"

hi all
     i am getting a strange problem ,
while doing release of PO(purchase order) by t.code ME29N, i am able to release and SAVE it properly with out any error.
But when returning back to ME22N t.code to see that PO .
i am getting this error :
Note : - this error is coming for a particular TYPE of PO's and with
            in that TYPE all PO are not giving ERROR,
            Please tell me what can be reason,
Express Document "Update Terminated"
Runtime Error          POSTING_ILLEGAL_STATEMENT
       Occurred on     15.07.2008 at   11:03:24
Statement "CALL DIALOG" is not allowed in this form.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLSTXW " had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Information on where terminated
The termination occurred in the ABAP program "SAPLSTXW " in "DISPLAY_OTF".
The main program was "RSM13000 ".
The termination occurred in line 82 of the source code of the (Include)
program "LSTXWU02 "
of the source code of program "LSTXWU02 " (when calling the editor 820).
The program "SAPLSTXW " was started in the update system.
000710
000720     if ( sy-binpt = false and
000730        ( ( cl_gui_object=>www_active = true or
000740            itcpp-tdscreen = 'ITS' ) or
000750          ( cl_gui_object=>javabean = true and
000760            itcpp-tdscabap = false ) ) ).
000770
000780       perform cc_display_pdf.
000790
000800     else.
000810
>       call dialog 'DISPLAY_OTF'                "ABAP-List-Preview
000830              exporting otf itcpp 0
000840            importing itcpp.
000850
000860     endif.
shall i concern this with BASIS person , coz every PO not having this problem,
i think it is related to time taken by SERVER for UPDATE is more then this error comes .
OR is there any technical issue related to ABAP.
regards
sachin

This problem will be caused by an output which will be triggered when releasing the PO. Check the messages in the PO for which one is causing the update error.
Regards,
John.

Update termination during Periodic Posting in RE-FX

Hi,
I am getting a update termination error -SAPSQL_ARRAY_INSERT_DUPREC during periodic posting for Lease Out Contract. Tcode - RERAPP
We use deferred tax. This functionality is used to transfer service tax
credit from interimn account to final account as applicable in India.
As suggested in the note 913805 by SAP we deleted the BTE's in application Key FI-TAX
Inspite of that we get the same update error.
Also we observed that after deleting the BTE's our service tax credit
functionality is also not working.
Further I have observed the following:
I am getting error only while posting contracts with service tax.
Tax Code L1 Account Key OS1 & OS2 & OS3
Please help me in finding a soultion to this.
Thanks & Regards
Sanjay

Hi,
The transfer step will transfer controlling assignments from the contract to the rental objects. This is useful if you want to run the controlling reports in order to see a P&L statement for a Building for example.
Regards,

Update termination error at the time of order creation and chamge?

Dear gurus,
Facing an error at the time of creation of order.
system is giving update termination error & when we are going in change mode of that order system is giving an error message " SD document XXXX is not in the database or has been achieved"
please treat on priority
regards,
krai

Hi,
Goto ST22 T.Code and analyse the error.The error message why it is terminated will be displayed here.
Or go to SBWP T.Code in the user where you got this error and check the inbox.
It will display why the error is appearing.
Show the same to the ABAPer and ask them to work on it.
I think your server may be slow and it will take some time to update the order created by you.But I am not sure.Check the error message.
Regards,
Krishna.

Update termination error at the time of order creation

Dear gurus,
Facing an error at the time of creation of order.
system is giving update termination error & when we are going in change mode of that order system is giving an error message " SD document XXXX is not in the database or has been achieved"
please treat on priority
regards,
krai

Hello ,
"Update terminated " error has two reasongs.
First is system update was not active and hence terminated
For this to check Goto the transaction code SM13 and check whether the SYSTEM UPDATE is active or not.
If it is active ,
Then click on the Option TOBE updated in the status and execute, then in the next screen you can find some list of documents that are not updated and causing error .
Click on MODULES in the screen and find the erro which causing this error.
Most this kind of error will happen if something in the Funcion Module or USER EXIT is missing.
Please check and revert back if you need further details
Also check the link
http://help.sap.com/saphelp_nw04/helpdata/en/e5/de870535cd11d3acb00000e83539c3/frameset.htm
regards,
santosh

While saving service work order Update termination

Hi Friends,
We have a service order integration with Notifications. First we create a Notification and in turn create as service order.
When the order is saved it goes for a update termination and the error message is " 00 671: ABAP/4 processor: DBIF_RSQL_INVALID_RSQL " for IW52 transaction. Actually when we save it provides the order number but never gets updated in the data base.
Again when we create the order from Notification for the second time, order gets created by skipping a number. For example when we save the order if the ordewr number is 902345 where it is not created , then when we create again the order number is 902346.
Have any one come across such terminations in IW52 for IW32?
Regards,
Selva

Friends,
At last my problem was resolved as it was escalated to SAP and SAP analysed as below,
This problem is caused becuase of the error in database interface. As the database server and the application server is a mix of platforms with different internal character data representations, this error occurs,
The work around solution as narrated below,
" For this we need to set the following parameters on the Default and Instance Profiles:
Profile Name                            Parameter name         Current Value     Recomm by SAP
DEFAULT.PFL                           rdisp/vbname              not set           rdisp/vbname=$(rdisp/myname)
CRH DVEBMGS00 cr1apod        rdisp/wp no vb               2                  Greater than 0
CRH DVEBMGS00 cr1apod        rdisp/vb dispatching        1                  Set to 0
crap0 CRH 20                            rdisp/wp no vb                4                  Greater than 0
crap0 CRH 20                            rdisp/vb dispatching        1                  Set to 0
Inorder to reflect all the changes, System CRH-202 needs to be restarted. Basis have done the above changes through T.Code: RZ11 and CRH indicates the Quality client.
So the profile paprameters will be different in each of SAP systems.
Hope this will be very useful for future reference to all of us.
Regards,
selva

STATUS_UPDATE error to update USER STATUS - Update termination error

Hi All,
I am using status_update FM in sales order user exit MV45AFZZ in a perform routine for updating user status in line item for sales order. There are 4 custom statuses created for the sales order line item. 1,2 3, and 4 by configuration. My job is to select one of those based on user selection.
Scenario: During change order process using VA02, I have to change the existing status to a third status when user selects the second one. That is for example, in VA02, user selects status 4 from previous status 3, and save, I have to make the status 4 inactive and save the new status 2 instead of 3 though user selected 3. How do I achieve this.? ????Any programming example is really appreciated. Thanks!!!
I am right now using STATUS_READ and reading the existing status 4. Then making it inactive using status_update FM. And updating the new status 2 as active one and 3 as inactive again. Two inactive updates and one active update is throwing an update termination error while saving the sales order.
Any help is really appreciated.
Thanks
Ricky

Hi ricky,
For saving any changes you need to have a Z-table.
In programs we can't store the user selection. In your case you can create a z-table and store the status there and delete the last status. The process would be faster as you will always have one record in the table.
. One more advantage is you can even track the changes through the Z-table(User who is changing it.)
Hope this solution will surely help you.
Cheers
Suvi

FSCM via WS-RM (without PI ) - Update termination issue

Hello experts .
We are trying to integrate SD with FSCM ( credit management) using WS-RM (without PI).
Details of the issue and steps followed so far.
Ideal Scenario :
Once we create / change a sales order ( in SD ) , the interface Creditworthinessquery_out (WS Consumer ) gets triggered (in SD) and the subsequent response CREDITWORTHINESSQUERY_IN(Provider) is triggered from FSCM (with the details of creditworthiness).Once the query response in received an notification is triggered from SD to FSCM (asynchronous service).
After receiving the query response the functionality of credit check happens while creating / changing the sales order .
Configuration steps followed in SOAMANAGER
We have created end points for all the relevant service interfaces (Providers) , and also created logical ports for the respective consumers.
During the creation of logical ports - for the consumers we used the WSDL (of the providers) as the inbound message action.
(This has been done to all the services query , notification that are relevant in our integration).
Current behavior / issue .
While creating sales order the sales order is not getting saved (getting updated in the database).System allows us to complete the sales order creation process and also we get a message as sales order saved successfully. But then there is a update terminated express document that pops up. Sales order is not getting updated in the database.
When I see the logs/traces in SOAMANAGER I see that the query out is successful , query in has the right response (in warning state though) . But no notification is being triggered ?? 
How to overcome this update termination issue ?
When we see the SM13 log , it points to SLD issue (LCR 010: Internal error in SLD API). why do we need a SLD without PI

Hi ,
Finally we are able to solve the update termination issue . But again we are using a work around .
Situation :
Once we executed the VA01 transaction we were getting update termination issue . After lots of debuggung we found that system was trying to get the Business system details ( Own business system data ) . The table lcrt_clntcache had no values.
Solution
We inserted appropriate values in the Table LCRT_CLNTCACH (business system data ) and now it works .This is a work around we got as of now.Credit checks are happening successfully and also integration is good .
(typically if we define business system in SLD (PI) , and run SLD_CHECK , this table gets populated , but in our case we are not using PI instead we are using WS-RM)
But now few questions arise .
a) Why do we need a business system in case we are not using PI ( typically we define business system and technical system in PI ) and instead using WS-RM ?
b) Is it a good practice to update the table ( as did in workaround above )?
c) Is this any bug and needs to be consulted with SAP ?
Please let me know your views .
Edited by: Vedula Adeep on Jan 16, 2012 8:42 AM

Integrating SD with FSCM using WS-RM - Update Termination error

Hello experts .
We are trying to integrate SD with FSCM ( credit management) using WS-RM (without PI).
Details of the issue and steps followed so far.
Ideal Scenario :
Once we create / change a sales order ( in SD ) , the interface Creditworthinessquery_out (WS Consumer ) gets triggered (in SD) and the subsequent response CREDITWORTHINESSQUERY_IN(Provider) is triggered from FSCM (with the details of creditworthiness).Once the query response in received an notification is triggered from SD to FSCM (asynchronous service).
After receiving the query response the functionality of credit check happens while creating / changing the sales order .
Configuration steps followed in SOAMANAGER
We have created end points for all the relevant service interfaces (Providers) , and also created logical ports for the respective consumers.
During the creation of logical ports - for the consumers we used the WSDL (of the providers) as the inbound message action.
(This has been done to all the services query , notification that are relevant in our integration).
Current behavior / issue .
While creating sales order the sales order is not getting saved (getting updated in the database).System allows us to complete the sales order creation process and also we get a message as sales order saved successfully. But then there is a update terminated express document that pops up. Sales order is not getting updated in the database.
When I see the logs/traces in SOAMANAGER I see that the query out is successful , query in has the right response (in warning state though) . But no notification is being triggered ?? 
How to overcome this update termination issue ?
When we see the SM13 log , it points to SLD issue (LCR 010: Internal error in SLD API). why do we need a SLD without PI ?

Hi ,
Can you tell me more details of how you are testing this ? I was successfully able to impilment this solution (credit management using ws-rm in ehp5). If you can give me more details i can surely try to help .

F-44 Vendor Clearing Update Terminated

Dear All,
              When we try clearing Open Line Items of a particular Vendor, system posts the document but eventually produces an ABAP RunTIme Error with Update Terminated Error. The line items remain as open items instead of getting cleared.The Dump Details are:
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLJ1IDEFTAX" had to be terminated because one of
the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
The termination occurred in the ABAP program "SAPLJ1IDEFTAX" in
"J_1I_POST_DEFTAX_ITEM".
The main program was "RSM13000 ".
The termination occurred in line 44 of the source code of the (Include)
program "LJ1IDEFTAXU04"
of the source code of program "LJ1IDEFTAXU04" (when calling the editor 440).
The program "SAPLJ1IDEFTAX" was started in the update system.
Processing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
procedure "J_1I_POST_DEFTAX_ITEM" "(FUNCTION)" but was not handled locally, not
declared in the
RAISING clause of the procedure.
The procedure is in the program "SAPLJ1IDEFTAX ". Its source code starts in
line 7
of the (Include) program "LJ1IDEFTAX$04 ".
DATA ls_deftax_item_insert TYPE J_1IDEFTAX_IT.
LOOP AT it_deftax_item_insert INTO ls_deftax_item_insert.
    IF ls_deftax_item_insert-line_type IS INITIAL.
      message x025(DEFTAX) with sy-tcode
                                       'NO_LINE_TYPE'
                                       'DEFTAX_ITEM'
                                       'FI_POST_DEFTAX_ITEM'.
    ENDIF.
ENDLOOP.
IF NOT it_deftax_item_insert[] IS INITIAL.
    INSERT J_1IDEFTAX_IT FROM TABLE it_deftax_item_insert.
ENDIF.
IF NOT it_deftax_item_update[] IS INITIAL.
    UPDATE J_1IDEFTAX_IT FROM TABLE it_deftax_item_update.
ENDIF.
ENDFUNCTION.
Is anybody aware of any solution or note related to this.
Regards,
Sonali.

Hi Sonali,
       This error due to Some text objects and messages are missed in consolidation system. Please take help of the basis consultant and implement the support packages 932658 & 932659
Regards,
Srinivas Muthyala

Update termination in Transaction ME9F

Hello MM Guru’s,
I would like to inform you that we are observing update termination in transaction ME9F for a particular user repeatedly in production environment.
Error in Functional Module: RV_MESSAGE_UPDATE
Error Message: WHT type Z4 missing in vendor master XXXXXXXX
When I check in vendor master data Indicator for withholding tax type Z4 already maintained.
It was strange why when users execute transaction ME9F the above updates terminate happens in the system.
I got a similar issue earlier where at that time Indicator for withholding tax type not maintained in vendor master data and I have informed business to maintain and re execute the transaction ME9F.
Request you to help me on this issue as I said this is a repeated one which is occurring for a particular user and I need to fix it by taking your valuable input.
Revert back in case you need any information required from my end.
Cheers,
Kumar S

Hello Bijay
I was asking you about my analysis (2 different users access ME9F for the same PO) done along with ABAPer whether its correct or not.
In your earlier response you have not responded to my analysis instead you are replying me that experts cant access my system.
I very well understand that our Experts cant access my system but they are always helping me for my all issues with their valuable input.
We just wanted to know whether we are deviating from the issue in this case.
I have also checked what other experts like Jurgen/AKPT & Mallinath suggested me and the analysis given below,
To inform experts that we never use custom print program and we are using standard SAPFM06P print program.But the layout is custom according to our business requirement.
Let me know still you need any clarification from my end.
Regards,
Kumar.S

PO update terminated with error - migo

Experts,
Entering a goods receipt in R/3 for an SRM replicated P.O. (using trx.
MIGO). Upon backing out of the transaction, an "update terminated"
message is received with a short dump in the system log.
The Material doc. is posted correctly and all accounting documents are
posted correctly.
We looked at SAP note 131178 but this does not seem to be exactly what
we need.
This error does not happen every time. Sometimes the PO can be posted
without any short dump.
We are on using ECC 6.0 that is connected to SRM 5.5
Any help would be greatly appreciated.
Below is the output of the shortdump in ST22:
Runtime Errors         PERFORM_NOT_FOUND
Exception              CX_SY_DYN_CALL_ILLEGAL_FORM
Date and Time          10/10/2007 13:24:45
Short text
Call (PERFORM) to a non-existent routine.
What happened?
There exist various options:
Error in the ABAP Application Program
The current ABAP program "RMCSS012" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
or
Error in the SAP kernel.
The current ABAP "RMCSS012" program had to be terminated because the
ABAP processor detected an internal system error.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FORM', was
not caught in
procedure "F0020_UPDATE" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The program "RMCSS012" is meant to execute an external PERFORM,
namely the routine "MCE1_100" of the program "SAPFMCEF", but
this routine does not exist.
This may be due to any of the following reasons:
1. One of the programs "RMCSS012" or "SAPFMCEF" is currently being developed.
The name "MCE1_100" of the called routine may be incorrect, or
the routine "MCE1_100" is not yet implemented in the program "SAPFMCEF".
2. If the program SAPMSSY1 is involved in the runtime error, one of
the function modules called via RFC is not flagged as remote-capable.
(see Transaction SE37 Goto -> Administration -> RFC flag)
3. There is an inconsistency in the system. The versions of the
|    programs "RMCSS012" and "SAPFMCEF" do not match.

Hi Pooja,
Check SAP Note 1015948 - AFS:Update terminated after PO Change ME22N. and SAP 485651
Thanks
Sunny

"Update Termination" error when TECO is been done to Workorders in IW32

Hi Everyone,
I am facing some problem with IW32, what has happened is when I create a notifiaction and simulatenously do a TECO(technically completed) to a workoder in IW32, i get a error Update terminated.
I problem is it is not cretaing th notification too, after when i create a notification and click on TECO icon, it leave the IW32 screen and says Order#XXXX and Notification %000000000001 saved.
Note that recently the support pack has been applied to the system(ECC 6.0)
so when i freshly create a WO# and create a notification and do teco immediately i do not have any problem and notification too gets created.
I have problem only those WO# s which was created before support pack and notification and teco done now(i.e. after supprot pack is applied) .
Please help me on this, every day this seems to be a problem i get a couple tickets on this and unable to rectify this error
Regards,
Raj

Hi Everyone,
I forgot to add the error that causes Upadte terminte,
when i looked in SM13, it says Notification Missing, Since notification and teco happening simulataneously this is happening, but why is that when notification created and done Teco before and after Support pack works..
where as the WO# create before and notification and teco done later has problem..
is it some cofig problem..

Update termination error in IW32 because of requisition flag change

Has anyone worked on IW32 to change the requisition flag of a work order from never to immediate. I tried doing this using BAPI_ALM_ORDER_MAINTAIN. It works fine for work order having operation control key same for every operation. But if this control key changes for any operation, then the update termination error occurs and hence the requisition flag change does not happen.
Thanks in Advance

Excise invoice is generated in the back ground on creation of the Invoice
Have you tried by changing the configuration so as the sytem not to generate excise invoice automatically in the background? If so, were you able to save the billing document successfully?
G. Lakshmipathi

Update termination in ME29N

Similar Messages

Maybe you are looking for