Update to 10.4.6 results in unrepairable error on harddrive
Responding to the software update notice, I tried to update from 10.4.5 to 10.4.6. I got a message that the installation failed. Performance started to deteriorate to the point where I could not even get Systems Preferences. I tried a restart and only got to the gray apple and spinning gear before everything stopped. I to run a repair from Disk Utility from a installation disk, but got the message: "checking HFS Plus vol -- Invalid B-tree node size -- Volume check failed --- 1 HFS volume could not be repaired because of an error". Also an Archive and Install attempt from the installation disk failed.
I was able to boot up and access a duplicate a external firewire drive. Hence, this posting.
Can I restore the duplicate file back onto my hd and continue with my update -- or no update? Or do I have a damaged hd that needs to be repaired/replaced?
Any suggestions would be appreciated. Thanks
powerbook g4 Mac OS X (10.4.6)
That worked, but restoring w/ Carbon Copy Cloner was more complex and time-consuming than I anticipated. It took a few tries and changes (who would have thought that to restore using CCC you would have to make the Mac HD privacy shield from Spotlight? What is the point of Spotlight if you can't search your hd?) Anyway, I'm up and running and updated to 10.4.6. Thanks
Similar Messages
-
Updating un-jailbroken 3gs iOS results in activation error - Help please!
After updating my iphone 3gs to a new iOS it comes up with an activation error - this phone has NOT been jailbroken and I have tried apples suggestions. Is there anything else I can do - or should I go just in to an apple store?
These are the things I have tried: http://support.apple.com/kb/TS3424?viewlocale=en_US
And the error message says: Activation request could not be completed. If the problem persists, please contact customer care.
After doing a factory restore this message comes up in itunes:
We're sorry, we are unable to continue with your activation at this time.
I am also trying to activate it without a SIM... I lost my 4S last night and am trying to use this one with the internet for the time being until it is either returned or I get another SIM. The phone was working perfectly until I did the ios update -
(Calculate Result via update rule) vs. (Calculate Result in a query)
Hi,
I got requirements to count number of people who sold the same product category in the same region.
I'm not sure if query could fullfill the following requirements or not.
<b>Example data in the ODS:</b>
for Period: 06/2005
People-A (region-M1) sold product category-C1.
People-A (region-M1) sold product category-C2.
People-B (region-M1) sold product category-C1.
People-B (region-M1) sold product category-C3.
People-C (region-M1) sold product category-C3.
People-D (region-M2) sold product category-C3.
In a report,
- user filter: Month/Year
- user filter: only one People at a time
- it should display all product categories.
I'm thinking to count number of people through an update rule and store the result directly in the ODS. I'm not quite sure whether this is a good idea or not.
Any suggestion would be sincerely appreciated.
Thanks much.
-WJ-Hi Wachira,
We usually fulfill the "counting" reqts by adding a Counter KF to the InfoProvider (supply a constant of 1 in the transfer rules). Then in the query you can use exception aggregation for calculating different Count By...this is a more flexible approach.
Hope this helps... -
My last iPhone 4 software update to 7.0.4 resulted in an overall reduction in speed with all the phone functions. Anyone know of a solution?
Early reports of the iOS 7.1 beta indicate that it is faster. Other than waiting, one other thing you might try is the following: http://www.macobserver.com/tmo/article/disable-app-zooming-for-quicker-switching -unlocking
-
Different live update 3 and live monitor results
Different live update 3 and live monitor results.
And manual downloads are different also.
Not sure which way to go.
All checked today
Drivers Tabs
Live Update 3 v3.79 shows
Update Date 2006/11/17
Via Chipset Driver v5.07a 7.10mb
Via Lan Driver v3.23.0.0417 996KB
AMD Away Driver v1.0.1.0 1.19MB
Live Monitor shows
Search Time: Sat, Nov. 25, 2006, 17:13:55
VIA Chipset Drivers 4.51 1.68MB
VIA LAN Drivers 3.23.0.0408 537.5KB
VIA Smart5.1CH Sound Drivers 6.14.01.4010 3.92MB
And these are from manually Looking up my MB
at Support Downloads Today
VIA Chipset 4in1 Drivers 5.09a 7587KB
VIA 10/100 LAN Drivers 3.32.0.0417 638KB
VIA Smart5.1CH Sound Drivers Driver version: 6.14.01.4120 (package:620b)3142KBQuote from: Maesus on 27-November-06, 19:26:55
my take is... don't update if nothing breaks in your system. These are very fundamental drivers, the LAN and the Audio, most if not all of the features are already there and there won't be EXTRA features added by new updated drivers. Don't hope much! and don't update unless you really think it's necessary. Just my piece of advice. :D
I second to Maesus advice. -
VoLTE update....unexpected results
I installed the update. VoLTE isnt rolling out to me until Sept 19. This update was told to me by VZW to be a prep update. Part 1 of 2. The option is not there for me in Tethering and Networks to enable VoLTE. Also the VuTalk uninstall remained and the weather app disappeared though the widget is still there and the process is running.
It's rumored by VZW that a Sept 19, 2014 update will fix the growing number of issues presented after the Sept 11, 2014 24A to 25B update. My list of issues is growing. Pop up text window auto exits before text can be entered after keyboard pops up, screen stays on, YouTube opens with screen off, proximity sensor does not allow screen to turn off during call, volume set to silent randomly reverts to lound, weather app missing (though they said the update deleted it and is not included in the update) the com.google.process.gapps has stopped error persists as does the Google Location reporting feature error where settings are reverted to "Off." I was offered a replacement G2, but was told that if I kept my present phone it would never work correctly until LG released a fix and also that the next update could cause further issues. this is my 2nd replacement G2 thus far. I did have another option though. I could take advantage of a special early upgrade promo and get anything from a Moto-X for $400 to an S5 or G3 for $500!!!!!!! This is with me having $100 deductible with Asurion at $8 a month. VZW said it was up to LG to deem the replacement of the device with a different model from a different manufacturer. I dont quite understand that, and switching carriers (out of spite or even with ETF buyouts) is just silly considering all manufacturers and carriers have issues. I had a couple small issues with my first G2. I had serious issues after the KitKat update. Now this update has further issues not resolved from previous updates, and there is still another update on the way for VoLTE, the 2nd part of the Sept 11 update due near or on Sept 19. then....LOL, another update for Android L sometime in the next 6 months!!! I guess i should always buy certified refurbished phones to begin with since I have to replace a phone after every update. Anyhoozer, just a heads up.
-
When I tried to update my iPad I got an error 9. Now, I am unable to access my iPad. It is in a continuous cycle when I try to update or restore the iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.
Here's the cycle:
I plug in my iPad when “cable to iTunes shows on iPad screen. It says "Your iPad can't be updated, you must restore it to factory settings." That bad enough news, but it gets worse.
Click Restore
Extracting software…
Preparing iPad for restore
Waiting for iPad…
Verifying iPad restore with Apple…
(empty bar under the Apple logo…does not show any activity)
“The iPad “iPad” could not be restored. An unknown error occurred (9).”
Notes: I just upgraded to OS X Yosemite 10.10.1 on my iMac (27-inch, Mid 2011) in the last week. It’s the first time I’m tried to backup/update my iPad since the iMac update.
I swapped out the USB cable to a new cable and get the same results.
I also unplugged all other USB devices from the iMac and security on my iPad and still get the same results.
I find it strange that it shows no Serial number for my my iPad 2 when plugged in. It shows “Serial Number: n/a on the screen when it displays: “iPad Recovery Mode To update your iPad without erasing its contents, click Update. To restore your iPad to its factory settings, click Restore iPad.
I prefer to update my iPad, but it displays “Your iPad can’t be updated, you must restore it to factory settings. If you previously backed up the iPad, click Restore Backup after the restore process completes.”
It’s a continuous loop. I get the display on my iPad to plug in the iPad to iTunes, plug it in which ends after going through the above procedure saying an error occurred (9).
So now I cannot use my iPad. When I turn it on I get the display showing me to plug it into iTunes with the cable. Since this is the only option I have I plug it in and the loop begins.
Any advice would be appreciated.
Thanks!Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I am using a windows 7 PC. Every time I try to update my Itune I am having a server error and I am not able to log in on my Icloud. I tried a network test a. below is the result:
Microsoft Windows 7 Business Edition Service Pack 1 (Build 7601)
Sony Corporation VPCX11S1E
iTunes 10.6.1.7
QuickTime 7.7.1
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0014AEDC02A92728
Current user is not an administrator.
The current local date and time is 2012-05-22 20:14:28.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) Graphics Media Accelerator 500
**** External Plug-ins Information ****
No external plug-ins installed.
The drive E: HUAWEI Mass Storage Rev 2.31 is a USB 1 device.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {4C73E5E8-064C-400E-9850-AB0485F639A2}
Description: Microsoft Virtual WiFi Miniport Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 01:00:00 1970
Lease Expires: Thu Jan 01 01:00:00 1970
DNS Servers:
Adapter Name: {DCE376E2-098D-4857-BF60-DBC90172CBA3}
Description: HUAWEI Mobile Connect - 3G Network Card
IP Address: 10.162.117.8
Subnet Mask: 255.255.255.240
Default Gateway: 10.162.117.1
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 01:00:00 1970
Lease Expires: Thu Jan 01 01:00:00 1970
DNS Servers: 10.148.128.18
10.148.128.26
Adapter Name: {226D8A54-B7DA-4F1F-8EAB-614C5F54FABE}
Description: Qualcomm Gobi 2000 HS-USB Mobile Broadband Device 9225
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 01:00:00 1970
Lease Expires: Thu Jan 01 01:00:00 1970
DNS Servers:
Adapter Name: {918B9F90-A145-4FD5-8150-E330DF9E74A1}
Description: Bluetooth Device (Personal Area Network) #2
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 01:00:00 1970
Lease Expires: Thu Jan 01 01:00:00 1970
DNS Servers:
Adapter Name: {87949730-0CE0-4483-A8AA-4FBC19A613D9}
Description: Marvell Yukon 88E8057 PCI-E Gigabit Ethernet Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 01:00:00 1970
Lease Expires: Thu Jan 01 01:00:00 1970
DNS Servers:
Adapter Name: {1678E6C4-0A8D-49F9-B86A-30133B9C2AEB}
Description: Qualcomm Atheros AR9285 Wireless Network Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 01:00:00 1970
Lease Expires: Thu Jan 01 01:00:00 1970
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
Last successful iTunes Store access was 2012-04-05 00:00:28.
**** Device Connectivity Tests ****
iPodService 10.6.1.7 is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) SCH Family USB Universal Host Controller - 8114. Device is working properly.
Intel(R) SCH Family USB Universal Host Controller - 8115. Device is working properly.
Intel(R) SCH Family USB Universal Host Controller - 8116. Device is working properly.
Intel(R) SCH Family USB2 Enhanced Host Controller - 8117. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPod touch (3rd generation) running firmware version 3.1.3
Serial Number: 9C01639A6K2
iPhone 4S running firmware version 5.1
Serial Number: DNQHF0ENDTD7
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.
Can any one help me?
Regards
Aderito
<Email Edited By Host>In the course of your troubleshooting to date, have you worked through the following document?
Apple software on Windows: May see performance issues and blank iTunes Store -
Creating new record in Results Table giving Error
Hi All,
On update page there is a Results Table with Add button to create a new row.
While creating a new record on Results Table gives error
Attribute set for AccessId in view object XXLCUpdVariablesVO1 failed
I have checked EO and VO attributes, everything seems to be right.
Also Updatable is set to 'Always'.
Still don't know why this error is coming up.
Plz help to resolve this error.
Thanks,
SKAjay,
XML code
<?xml version='1.0' encoding='windows-1252' ?>
<!DOCTYPE Entity SYSTEM "jbo_03_01.dtd">
<Entity
Name="XXLCVarAssignmentsEO"
DBObjectType="table"
DBObjectName="XXLCOKC_VARIABLE_ASSIGNMENTS"
AliasName="XXLCVarAssignmentsEO"
BindingStyle="OracleName"
UseGlueCode="false"
RowClass="xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEOImpl"
DefClass="oracle.apps.fnd.framework.server.OAEntityDefImpl"
CollClass="oracle.apps.fnd.framework.server.OAEntityCache" >
<DesignTime>
<Attr Name="_isCodegen" Value="true" />
<Attr Name="_version" Value="10.1.3.41.57" />
<AttrArray Name="_publishEvents">
</AttrArray>
<Attr Name="_panelSchema" Value="table|alias" />
<Attr Name="_codeGenFlag2" Value="Init|Delete|Access|Val" />
</DesignTime>
<Attribute
Name="AssignmentId"
IsNotNull="true"
ColumnName="ASSIGNMENT_ID"
Type="oracle.jbo.domain.Number"
ColumnType="NUMBER"
SQLType="NUMERIC"
TableName="XXLCOKC_VARIABLE_ASSIGNMENTS"
PrimaryKey="true" >
<DesignTime>
<Attr Name="_DisplaySize" Value="22" />
</DesignTime>
</Attribute>
<Attribute
Name="AssignmentAccess"
IsNotNull="true"
Precision="30"
ColumnName="ASSIGNMENT_ACCESS"
Type="java.lang.String"
ColumnType="VARCHAR2"
SQLType="VARCHAR"
TableName="XXLCOKC_VARIABLE_ASSIGNMENTS" >
<DesignTime>
<Attr Name="_DisplaySize" Value="30" />
</DesignTime>
</Attribute>
<Attribute
Name="VariableId"
IsNotNull="true"
ColumnName="VARIABLE_ID"
Type="oracle.jbo.domain.Number"
ColumnType="NUMBER"
SQLType="NUMERIC"
TableName="XXLCOKC_VARIABLE_ASSIGNMENTS" >
<DesignTime>
<Attr Name="_DisplaySize" Value="22" />
</DesignTime>
</Attribute>
<Attribute
Name="ListValueId"
IsNotNull="true"
ColumnName="LIST_VALUE_ID"
Type="oracle.jbo.domain.Number"
ColumnType="NUMBER"
SQLType="NUMERIC"
TableName="XXLCOKC_VARIABLE_ASSIGNMENTS" >
<DesignTime>
<Attr Name="_DisplaySize" Value="22" />
</DesignTime>
</Attribute>
<Attribute
Name="OrganizationId"
IsNotNull="true"
Precision="15"
Scale="0"
ColumnName="ORGANIZATION_ID"
Type="oracle.jbo.domain.Number"
ColumnType="NUMBER"
SQLType="NUMERIC"
TableName="XXLCOKC_VARIABLE_ASSIGNMENTS" >
<DesignTime>
<Attr Name="_DisplaySize" Value="22" />
</DesignTime>
</Attribute>
<Attribute
Name="TemplateId"
IsNotNull="true"
ColumnName="TEMPLATE_ID"
Type="oracle.jbo.domain.Number"
ColumnType="NUMBER"
SQLType="NUMERIC"
TableName="XXLCOKC_VARIABLE_ASSIGNMENTS" >
<DesignTime>
<Attr Name="_DisplaySize" Value="22" />
</DesignTime>
</Attribute>
<Attribute
Name="AuctionHeaderId"
IsNotNull="true"
ColumnName="AUCTION_HEADER_ID"
Type="oracle.jbo.domain.Number"
ColumnType="NUMBER"
SQLType="NUMERIC"
TableName="XXLCOKC_VARIABLE_ASSIGNMENTS" >
<DesignTime>
<Attr Name="_DisplaySize" Value="22" />
</DesignTime>
</Attribute>
<Attribute
Name="PoHeaderId"
IsNotNull="true"
ColumnName="PO_HEADER_ID"
Type="oracle.jbo.domain.Number"
ColumnType="NUMBER"
SQLType="NUMERIC"
TableName="XXLCOKC_VARIABLE_ASSIGNMENTS" >
<DesignTime>
<Attr Name="_DisplaySize" Value="22" />
</DesignTime>
</Attribute>
<Attribute
Name="CreatedBy"
IsNotNull="true"
ColumnName="CREATED_BY"
Type="oracle.jbo.domain.Number"
ColumnType="NUMBER"
SQLType="NUMERIC"
TableName="XXLCOKC_VARIABLE_ASSIGNMENTS" >
<DesignTime>
<Attr Name="_DisplaySize" Value="22" />
</DesignTime>
</Attribute>
<Attribute
Name="CreationDate"
IsNotNull="true"
ColumnName="CREATION_DATE"
Type="oracle.jbo.domain.Date"
ColumnType="DATE"
SQLType="DATE"
TableName="XXLCOKC_VARIABLE_ASSIGNMENTS" >
<DesignTime>
<Attr Name="_DisplaySize" Value="7" />
</DesignTime>
</Attribute>
<Attribute
Name="LastUpdateDate"
IsNotNull="true"
ColumnName="LAST_UPDATE_DATE"
Type="oracle.jbo.domain.Date"
ColumnType="DATE"
SQLType="DATE"
TableName="XXLCOKC_VARIABLE_ASSIGNMENTS" >
<DesignTime>
<Attr Name="_DisplaySize" Value="7" />
</DesignTime>
</Attribute>
<Attribute
Name="LastUpdatedBy"
IsNotNull="true"
ColumnName="LAST_UPDATED_BY"
Type="oracle.jbo.domain.Number"
ColumnType="NUMBER"
SQLType="NUMERIC"
TableName="XXLCOKC_VARIABLE_ASSIGNMENTS" >
<DesignTime>
<Attr Name="_DisplaySize" Value="22" />
</DesignTime>
</Attribute>
<Attribute
Name="LastUpdateLogin"
IsNotNull="true"
ColumnName="LAST_UPDATE_LOGIN"
Type="oracle.jbo.domain.Number"
ColumnType="NUMBER"
SQLType="NUMERIC"
TableName="XXLCOKC_VARIABLE_ASSIGNMENTS" >
<DesignTime>
<Attr Name="_DisplaySize" Value="22" />
</DesignTime>
</Attribute>
<Attribute
Name="AccessId"
ColumnName="ACCESS_ID"
Type="oracle.jbo.domain.Number"
ColumnType="NUMBER"
SQLType="NUMERIC"
TableName="XXLCOKC_VARIABLE_ASSIGNMENTS" >
<DesignTime>
<Attr Name="_DisplaySize" Value="22" />
</DesignTime>
</Attribute>
<Key
Name="SysC00329905" >
<AttrArray Name="Attributes">
<Item Value="xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEO.AssignmentAccess" />
</AttrArray>
<DesignTime>
<Attr Name="_checkCondition" Value=""ASSIGNMENT_ACCESS" IS NOT NULL" />
<Attr Name="_isCheck" Value="true" />
<Attr Name="_DBObjectName" Value="SYS_C00329905" />
</DesignTime>
</Key>
<Key
Name="SysC00329906" >
<AttrArray Name="Attributes">
<Item Value="xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEO.VariableId" />
</AttrArray>
<DesignTime>
<Attr Name="_checkCondition" Value=""VARIABLE_ID" IS NOT NULL" />
<Attr Name="_isCheck" Value="true" />
<Attr Name="_DBObjectName" Value="SYS_C00329906" />
</DesignTime>
</Key>
<Key
Name="SysC00329907" >
<AttrArray Name="Attributes">
<Item Value="xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEO.ListValueId" />
</AttrArray>
<DesignTime>
<Attr Name="_checkCondition" Value=""LIST_VALUE_ID" IS NOT NULL" />
<Attr Name="_isCheck" Value="true" />
<Attr Name="_DBObjectName" Value="SYS_C00329907" />
</DesignTime>
</Key>
<Key
Name="SysC00329908" >
<AttrArray Name="Attributes">
<Item Value="xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEO.OrganizationId" />
</AttrArray>
<DesignTime>
<Attr Name="_checkCondition" Value=""ORGANIZATION_ID" IS NOT NULL" />
<Attr Name="_isCheck" Value="true" />
<Attr Name="_DBObjectName" Value="SYS_C00329908" />
</DesignTime>
</Key>
<Key
Name="SysC00329909" >
<AttrArray Name="Attributes">
<Item Value="xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEO.TemplateId" />
</AttrArray>
<DesignTime>
<Attr Name="_checkCondition" Value=""TEMPLATE_ID" IS NOT NULL" />
<Attr Name="_isCheck" Value="true" />
<Attr Name="_DBObjectName" Value="SYS_C00329909" />
</DesignTime>
</Key>
<Key
Name="SysC00329910" >
<AttrArray Name="Attributes">
<Item Value="xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEO.AuctionHeaderId" />
</AttrArray>
<DesignTime>
<Attr Name="_checkCondition" Value=""AUCTION_HEADER_ID" IS NOT NULL" />
<Attr Name="_isCheck" Value="true" />
<Attr Name="_DBObjectName" Value="SYS_C00329910" />
</DesignTime>
</Key>
<Key
Name="SysC00329911" >
<AttrArray Name="Attributes">
<Item Value="xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEO.PoHeaderId" />
</AttrArray>
<DesignTime>
<Attr Name="_checkCondition" Value=""PO_HEADER_ID" IS NOT NULL" />
<Attr Name="_isCheck" Value="true" />
<Attr Name="_DBObjectName" Value="SYS_C00329911" />
</DesignTime>
</Key>
<Key
Name="SysC00329912" >
<AttrArray Name="Attributes">
<Item Value="xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEO.CreatedBy" />
</AttrArray>
<DesignTime>
<Attr Name="_checkCondition" Value=""CREATED_BY" IS NOT NULL" />
<Attr Name="_isCheck" Value="true" />
<Attr Name="_DBObjectName" Value="SYS_C00329912" />
</DesignTime>
</Key>
<Key
Name="SysC00329913" >
<AttrArray Name="Attributes">
<Item Value="xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEO.CreationDate" />
</AttrArray>
<DesignTime>
<Attr Name="_checkCondition" Value=""CREATION_DATE" IS NOT NULL" />
<Attr Name="_isCheck" Value="true" />
<Attr Name="_DBObjectName" Value="SYS_C00329913" />
</DesignTime>
</Key>
<Key
Name="SysC00329914" >
<AttrArray Name="Attributes">
<Item Value="xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEO.LastUpdateDate" />
</AttrArray>
<DesignTime>
<Attr Name="_checkCondition" Value=""LAST_UPDATE_DATE" IS NOT NULL" />
<Attr Name="_isCheck" Value="true" />
<Attr Name="_DBObjectName" Value="SYS_C00329914" />
</DesignTime>
</Key>
<Key
Name="SysC00329915" >
<AttrArray Name="Attributes">
<Item Value="xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEO.LastUpdatedBy" />
</AttrArray>
<DesignTime>
<Attr Name="_checkCondition" Value=""LAST_UPDATED_BY" IS NOT NULL" />
<Attr Name="_isCheck" Value="true" />
<Attr Name="_DBObjectName" Value="SYS_C00329915" />
</DesignTime>
</Key>
<Key
Name="SysC00329916" >
<AttrArray Name="Attributes">
<Item Value="xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEO.LastUpdateLogin" />
</AttrArray>
<DesignTime>
<Attr Name="_checkCondition" Value=""LAST_UPDATE_LOGIN" IS NOT NULL" />
<Attr Name="_isCheck" Value="true" />
<Attr Name="_DBObjectName" Value="SYS_C00329916" />
</DesignTime>
</Key>
<Key
Name="SysC00329917" >
<AttrArray Name="Attributes">
<Item Value="xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEO.AssignmentId" />
</AttrArray>
<DesignTime>
<Attr Name="_isPrimary" Value="true" />
<Attr Name="_DBObjectName" Value="SYS_C00329917" />
</DesignTime>
</Key>
</Entity>
XXLCVarAssignmentsEOImpl Code
package xxlc.oracle.apps.okc.schema.articles.variables.server;
import oracle.apps.fnd.framework.OAAttrValException;
import oracle.apps.fnd.framework.OAException;
import oracle.apps.fnd.framework.server.OADBTransaction;
import oracle.apps.fnd.framework.server.OAEntityDefImpl;
import oracle.apps.fnd.framework.server.OAEntityImpl;
import oracle.jbo.AttributeList;
import oracle.jbo.Key;
import oracle.jbo.domain.Date;
import oracle.jbo.domain.Number;
import oracle.jbo.server.AttributeDefImpl;
import oracle.jbo.server.EntityDefImpl;
// --- File generated by Oracle ADF Business Components Design Time.
// --- Custom code may be added to this class.
// --- Warning: Do not modify method signatures of generated methods.
public class XXLCVarAssignmentsEOImpl extends OAEntityImpl
public static final int ASSIGNMENTID = 0;
public static final int ASSIGNMENTACCESS = 1;
public static final int VARIABLEID = 2;
public static final int LISTVALUEID = 3;
public static final int ORGANIZATIONID = 4;
public static final int TEMPLATEID = 5;
public static final int AUCTIONHEADERID = 6;
public static final int POHEADERID = 7;
public static final int CREATEDBY = 8;
public static final int CREATIONDATE = 9;
public static final int LASTUPDATEDATE = 10;
public static final int LASTUPDATEDBY = 11;
public static final int LASTUPDATELOGIN = 12;
public static final int ACCESSID = 13;
private static OAEntityDefImpl mDefinitionObject;
/**This is the default constructor (do not remove)
public XXLCVarAssignmentsEOImpl()
/**Retrieves the definition object for this instance class.
public static synchronized EntityDefImpl getDefinitionObject()
if (mDefinitionObject == null)
mDefinitionObject =
(OAEntityDefImpl)EntityDefImpl.findDefObject("xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEO");
return mDefinitionObject;
/**Add attribute defaulting logic in this method.
public void create(AttributeList attributeList)
super.create(attributeList);
OADBTransaction transaction = getOADBTransaction();
Number asgId = transaction.getSequenceValue("XXLC_VAR_ASG_SEQ");
setAssignmentId(asgId);
/**Add entity remove logic in this method.
public void remove()
super.remove();
/**Add Entity validation code in this method.
protected void validateEntity()
super.validateEntity();
/**Gets the attribute value for AssignmentId, using the alias name AssignmentId
public Number getAssignmentId()
return (Number)getAttributeInternal(ASSIGNMENTID);
/**Sets <code>value</code> as the attribute value for AssignmentId
public void setAssignmentId(Number value)
if (value != null)
OADBTransaction transaction = getOADBTransaction();
Object[] varKey = {value};
EntityDefImpl varDefinition = XXLCVarAssignmentsEOImpl.getDefinitionObject();
XXLCVarAssignmentsEOImpl variable =
(XXLCVarAssignmentsEOImpl)varDefinition.findByPrimaryKey(transaction, new Key(varKey));
if (variable != null)
throw new OAAttrValException(OAException.TYP_ENTITY_OBJECT,
getEntityDef().getFullName(), // EO name
getPrimaryKey(), // EO PK
"AssignmentId", // Attribute Name
value, // Attribute value
"AK", // Message product short name
"FWK_TBX_T_EMP_ID_UNIQUE"); // Message name
setAttributeInternal(ASSIGNMENTID, value);
/**Gets the attribute value for AssignmentAccess, using the alias name AssignmentAccess
public String getAssignmentAccess()
return (String)getAttributeInternal(ASSIGNMENTACCESS);
/**Sets <code>value</code> as the attribute value for AssignmentAccess
public void setAssignmentAccess(String value)
setAttributeInternal(ASSIGNMENTACCESS, value);
/**Gets the attribute value for VariableId, using the alias name VariableId
public Number getVariableId()
return (Number)getAttributeInternal(VARIABLEID);
/**Sets <code>value</code> as the attribute value for VariableId
public void setVariableId(Number value)
setAttributeInternal(VARIABLEID, value);
/**Gets the attribute value for ListValueId, using the alias name ListValueId
public Number getListValueId()
return (Number)getAttributeInternal(LISTVALUEID);
/**Sets <code>value</code> as the attribute value for ListValueId
public void setListValueId(Number value)
setAttributeInternal(LISTVALUEID, value);
/**Gets the attribute value for OrganizationId, using the alias name OrganizationId
public Number getOrganizationId()
return (Number)getAttributeInternal(ORGANIZATIONID);
/**Sets <code>value</code> as the attribute value for OrganizationId
public void setOrganizationId(Number value)
setAttributeInternal(ORGANIZATIONID, value);
/**Gets the attribute value for TemplateId, using the alias name TemplateId
public Number getTemplateId()
return (Number)getAttributeInternal(TEMPLATEID);
/**Sets <code>value</code> as the attribute value for TemplateId
public void setTemplateId(Number value)
setAttributeInternal(TEMPLATEID, value);
/**Gets the attribute value for AuctionHeaderId, using the alias name AuctionHeaderId
public Number getAuctionHeaderId()
return (Number)getAttributeInternal(AUCTIONHEADERID);
/**Sets <code>value</code> as the attribute value for AuctionHeaderId
public void setAuctionHeaderId(Number value)
setAttributeInternal(AUCTIONHEADERID, value);
/**Gets the attribute value for PoHeaderId, using the alias name PoHeaderId
public Number getPoHeaderId()
return (Number)getAttributeInternal(POHEADERID);
/**Sets <code>value</code> as the attribute value for PoHeaderId
public void setPoHeaderId(Number value)
setAttributeInternal(POHEADERID, value);
/**Gets the attribute value for CreatedBy, using the alias name CreatedBy
public Number getCreatedBy()
return (Number)getAttributeInternal(CREATEDBY);
/**Sets <code>value</code> as the attribute value for CreatedBy
public void setCreatedBy(Number value)
setAttributeInternal(CREATEDBY, value);
/**Gets the attribute value for CreationDate, using the alias name CreationDate
public Date getCreationDate()
return (Date)getAttributeInternal(CREATIONDATE);
/**Sets <code>value</code> as the attribute value for CreationDate
public void setCreationDate(Date value)
setAttributeInternal(CREATIONDATE, value);
/**Gets the attribute value for LastUpdateDate, using the alias name LastUpdateDate
public Date getLastUpdateDate()
return (Date)getAttributeInternal(LASTUPDATEDATE);
/**Sets <code>value</code> as the attribute value for LastUpdateDate
public void setLastUpdateDate(Date value)
setAttributeInternal(LASTUPDATEDATE, value);
/**Gets the attribute value for LastUpdatedBy, using the alias name LastUpdatedBy
public Number getLastUpdatedBy()
return (Number)getAttributeInternal(LASTUPDATEDBY);
/**Sets <code>value</code> as the attribute value for LastUpdatedBy
public void setLastUpdatedBy(Number value)
setAttributeInternal(LASTUPDATEDBY, value);
/**Gets the attribute value for LastUpdateLogin, using the alias name LastUpdateLogin
public Number getLastUpdateLogin()
return (Number)getAttributeInternal(LASTUPDATELOGIN);
/**Sets <code>value</code> as the attribute value for LastUpdateLogin
public void setLastUpdateLogin(Number value)
setAttributeInternal(LASTUPDATELOGIN, value);
/**getAttrInvokeAccessor: generated method. Do not modify.
protected Object getAttrInvokeAccessor(int index,
AttributeDefImpl attrDef) throws Exception
switch (index)
case ASSIGNMENTID:
return getAssignmentId();
case ASSIGNMENTACCESS:
return getAssignmentAccess();
case VARIABLEID:
return getVariableId();
case LISTVALUEID:
return getListValueId();
case ORGANIZATIONID:
return getOrganizationId();
case TEMPLATEID:
return getTemplateId();
case AUCTIONHEADERID:
return getAuctionHeaderId();
case POHEADERID:
return getPoHeaderId();
case CREATEDBY:
return getCreatedBy();
case CREATIONDATE:
return getCreationDate();
case LASTUPDATEDATE:
return getLastUpdateDate();
case LASTUPDATEDBY:
return getLastUpdatedBy();
case LASTUPDATELOGIN:
return getLastUpdateLogin();
case ACCESSID:
return getAccessId();
default:
return super.getAttrInvokeAccessor(index, attrDef);
/**setAttrInvokeAccessor: generated method. Do not modify.
protected void setAttrInvokeAccessor(int index, Object value,
AttributeDefImpl attrDef) throws Exception
switch (index)
case ASSIGNMENTID:
setAssignmentId((Number)value);
return;
case ASSIGNMENTACCESS:
setAssignmentAccess((String)value);
return;
case VARIABLEID:
setVariableId((Number)value);
return;
case LISTVALUEID:
setListValueId((Number)value);
return;
case ORGANIZATIONID:
setOrganizationId((Number)value);
return;
case TEMPLATEID:
setTemplateId((Number)value);
return;
case AUCTIONHEADERID:
setAuctionHeaderId((Number)value);
return;
case POHEADERID:
setPoHeaderId((Number)value);
return;
case CREATEDBY:
setCreatedBy((Number)value);
return;
case CREATIONDATE:
setCreationDate((Date)value);
return;
case LASTUPDATEDATE:
setLastUpdateDate((Date)value);
return;
case LASTUPDATEDBY:
setLastUpdatedBy((Number)value);
return;
case LASTUPDATELOGIN:
setLastUpdateLogin((Number)value);
return;
case ACCESSID:
setAccessId((Number)value);
return;
default:
super.setAttrInvokeAccessor(index, value, attrDef);
return;
/**Gets the attribute value for AccessId, using the alias name AccessId
public Number getAccessId()
return (Number)getAttributeInternal(ACCESSID);
/**Sets <code>value</code> as the attribute value for AccessId
public void setAccessId(Number value)
setAttributeInternal(ACCESSID, value);
/**Creates a Key object based on given key constituents
public static Key createPrimaryKey(Number assignmentId)
return new Key(new Object[]{assignmentId});
Thanks,
SK -
An amount of software-updates cannot be installed due to an unexpected error?
After downloading Software-updates, an amount of software-updates cannot be installed due to an unexpected error.
Is there someone who had the same problem and can help me?
Thanks in advance for your support!If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
Error: The percentage of requests that resulted in internal errors
I am using grid control with a 10.2 database and I keep getting this error with my http server.
Currently the error says:
The percentage of requests that resulted in internal errors is 55.1%
The metrics are set as warning = 1% and critical =1.5% so obviously this is a little over what we expect.
I have done some searching and cannot find any info about this metric or the resulting error. I guess I am looking for any help in understanding what this error means and if there is a way to fix it. Any info about how this percentage is calculated would be of help as well.
thank youI've raised an SR on this, asking for more information on the following two Oracle HTTP Server metric alerts:
The percentage of requests that resulted in failures is 69.09%
The percentage of requests that resulted in internal errors is 409.09%
I have found a reoccurring error in my apache logs:
File does not exist: /app/ora/product/EM10GR2/oms10g/Apache/Apache/htdocs/favicon.ico
This seems to be something to do with IE 5, so not sure its related.
I will keep you chaps updated with what oracle come back with.
Bazza -
I am updating my OSX and I keep getting an error 102,
I am updating my OSX and I keep getting an error 102
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
Hello,
I come to update the iTunes software it shows me an error 20 How do I solve this After I was once an error 13 appears.
And that's just Mac Air. I would like to get an answer because it annoys me that it happens ...!
NimrodThanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?! -
My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?
I tried this and still have the same problems. If I open Address book or the Mac App Store I get the library rebuild popup and a hang. I created a fresh user and then things are better apart from the printing issue. Its clearly some 3rd party software issue but the crash logs are meningless to me. I used the excellent Etre check app from http://www.etresoft.com/etrecheck so I have a list of what is being loaded and can compare clean and crashed user info but as I cant work out which of the startup items, launch agents, launch daemons etc that are causing the problem.
I have eliminated Dropbox, Mac Keeper and Witness, and it isnt related to my exterrnal LED cinema dispay or my external thunderbolt drives, or any USB devices if thats any help to anyone else. Info from Etrecheck follows -
Kernel Extensions:
com.oxsemi.driver.OxsemiDeviceType00 Version: 1.28.7
com.rogueamoeba.InstantOn Version: 6.0.2
com.rogueamoeba.InstantOnCore Version: 6.0.2
com.Cycling74.driver.Soundflower Version: 1.5.3
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[not loaded] com.adobe.fpsaud.plist
[not loaded] com.adobe.SwitchBoard.plist
[not loaded] com.bombich.ccc.plist
[not loaded] com.dymo.pnpd.plist
[not loaded] com.intego.BackupManagerPro.daemon.plist
[not loaded] com.micromat.TechToolProDaemon.plist
[not loaded] com.microsoft.office.licensing.helper.plist
[not loaded] com.orbicule.witnessd.plist
[not loaded] com.sierrawireless.SwitchTool.plist
[not loaded] com.stclairsoft.AppTamerAgent.plist
[not loaded] org.macosforge.xquartz.privileged_startx.plist
[not loaded] pcloudd.plist
Launch Agents:
[loaded] com.divx.dms.agent.plist
[loaded] com.divx.update.agent.plist
[loaded] com.epson.epw.agent.plist
[loaded] com.lacie.raidmonitor.daemon.plist
[loaded] com.lacie.safemanager.daemon.plist
[loaded] com.micromat.TechToolProAgent.plist
[loaded] com.orbicule.WitnessUserAgent.plist
[loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
[not loaded] .DS_Store
[loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
[loaded] com.digitalrebellion.SoftwareUpdateAutoCheck.plist
[loaded] com.divx.agent.postinstall.plist
[loaded] com.google.keystone.agent.plist
[loaded] com.propaganda.dejavu.dvmonitor.plist
[loaded] com.valvesoftware.steamclean.plist
[loaded] com.zeobit.MacKeeper.Helper.plist
User Login Items:
iTunesHelper
Synergy
TomTomHOMERunner
Dropbox
3rd Party Preference Panes:
Déjà Vu
Flash Player
Flip4Mac WMV
GR-55
Paragon NTFS for Mac ® OS X
Perian
Printopia
TechTool Protection
Witness -
everytime i try to update to 10.5.1 i get an error saying 'the feature you are trying to use is on a network resource that is unavailable'? its windows!
Which particular .msi file does the message go on to say can't be found, seg?
Maybe you are looking for
-
HT201239 Remove credit card from from so verification is not needed
Remove credit card verification
-
HTTP 403 Error in AS2 Connection
Hi, Would really appreciate some inputs on this one. Just to give a background, we're tying to establish an AS2 connection between us and a 3rd party. The 3rd party tried to send a test message using our connecton details, but they got an HTTP 403 E
-
I'd like to create a block of text on a blank page that is centered both horizontally and vertically no matter what the size of someone's screen or browser is. Is it possible to do this in Contribute?
-
Centering a Flash website?
Hello all, I am very new to Flash, but I have created a new webpage using Adobe Flash CS5.5, and there are a few things I am unsure about, one of them being centering the flash document on a webpage. My project is 1000x563 pixels big, and when I hit
-
I downloaded photoshop elements 13 and cannot register it.
I downloaded photoshop elements 13 and cannot register it or find a code. I received no email. I have followed all the various instructions with no luck. What can I do?