Update to 10.5.2 caused loss of wireless connectivity

After updating from 10.5.1 to 10.5.2 I couldn't connect to Network (wireless). Router function checked out ok with ISP. (I could get online wirelessly with my PDA.) I could get connectivity with my MBP via ethernet cable. I also couldn't connect wirelessly to my printer (which I could do before). Spent a lot of time with AppleCare tech. but didn't solve anything. Wound up reloading OS and restoring w/Time Machine. I'm back to v.10.5, and all works well. I'm reluctant to upgrade to anything further at the moment (maybe to 10.5.1...?). I'm concerned that I'll wind up with the same problem if I go up to 10.5.2. Any thoughts where I should go from here?

I'm "replying" to my own message because I need to modify it! With v.10.5 that I wound up with, I lost functionality of iTunes, plus a couple of other apps. Feeling masochistic, I then updated (again!) to 10.5.2. The various functions are back working fine, but AirPort cannot connect. I therefore connected my MBP to the router with an ethernet cable. Everything works OK, but it would sure be nice to function wirelessly like I did before the update! Any suggestions would be appreciated. BTW, on my system, I have Parallels and WinXP, but I haven't used it in several weeks; might there be some sort of conflict there, even if I'm not using Parallels?
nhuser

Similar Messages

Update to 10.4.6 causes loss of wireless mouse

I just updated to 10.4.6, and now my Apple Wireless Mouse doesn't work correctly. It shows in the list of bluetooth-connected devices, and the button functions, but moving the mouse does not move the cursor.
Have tried starting from scratch multiple times. In Bluetooth Setup Assistant, turning on the mouse produces flashes from the mouse LED as usual, until the Assistant announces that the connection is successfully established, when the LED goes out, and stays out. Neither moving the mouse on a surface, nor waving something past the optical sensor causes the LED to emit. Hence, I've now got a working bluetooth mouse button, but no mouse.
Anyone having similar problems?

Hi
I remember a few people with this problem after updating - but having searched briefly, I can't find a specific fix.
However - I do suggest you download & apply the 10.4.6 Combo Update.
The combo update does seem to fix a number of different issues that users have had after installing the standard 10.4.6 update.... so it's certainly worth a try.

My mac is causing loss of wireless connectivity on pc's

Okay so i have a new macbook and the airport card appears to be working fine. my friend has a new sony vaio. I can connect to their wireless network just fine, but for some reason, when i connect, even if it turn air port off, the vaio will not connect to the wireless network. It recognizes the network and shows full signal strength, but reports that there is limited connectivity and will not browse the internet. I have tried a lot of things such as restarting the viao, disconnecting and reconnecting to the network, but the only thing that seems to work is to unplug the wireless router and then plug everything back in. Does anyone know of a reason air port would cause this type of interference? Thank you so much!

I cannot confirm that other Wireless routers in my area share this same issue. I haven't tried to update firmware yet, as from the few I had talked to you generally don't want to touch something like that until a last resort.
I use a program called "Netstumbler" to detect other networks around me. As best as I can tell, when my router disappears off the grid, a lot of other routers do as well. I've used Channel 1 on G frequencies because the average number is as follows:
Channels:
1 - 1 person (me)
6 - 4 people (unknown)
11 - 1 person (close neighbour).
As to which neighbours are using wirless routers, Im unsure. About 30 meters away from my router, as mine unfortunately is placed agaisnt the house wall, is a complex that houses about 20-25 families. My computer also shares the same wall, but a floor above (like stated) for connectivity.
As for firmware, I believe I'll have a look into which Im running and hopefully update. I think it might not hurt even looking into an update for my PCI card as well.
Anymore help regarding this issue is appreciated. Thank you

Apple Mobile Device Support uninstall and itunes install causes loss of internet connection

Whenever I uninstall Apple Mobile Device Support (AMDS) I lose my internet connection. The only way to fix this is to restore Windows to a previous state. I've tried troubleshooting my internet connection when this happens but Windows tells me something is wrong with both my wired and wireless connection drivers... and of course I need the internet to fix said drivers :s
I've tried repairing AMDS and this doesn't help either.
I've been trying to download itunes but it tells me a program needed to install it cannot be run. After this I can't get back on the internet without first restoring windows to a previous state. I thought that uninstalling everything apple from my system would do the trick but I can't seem to uninstall AMDS without messing up my internet drivers. What else can I try?

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

TC & MBP - complete loss of wireless connection and usage

I apologise in advance if this is a very long winded post! I've been an Apple fan for some 20 years now and it's only in the last three months that my love affair is starting to wane due to (what seems to me) poor hardware releases.
My setup:
1 x PowerBook G4 1.25Ghz with Edimax 802.11n PC Card
1 x MBP 2.4Ghz (purchased April 2008) with AirPort 802.11n
1 x Time Capsule 500Gb
1 x Airport Extreme Base Station Gigabit Ethernet edition
1 x Netgear DG384 v2 (wired only) modem router
1 x standard ADSL connection (8Mbps) from a UK ISP (and yes, 8Mb is about the norm for the UK! Though in reality, it means closer to 4Mb...)
The Netgear router is connected to the ADSL line and is set up as the DHCP server for the network. I have a Fixed IP address from my ISP. The Time Capsule is connected via ethernet to the Netgear router. The TC is set up in Bridge mode as the router serves DHCP. The TC is wall mounted via the excellent AirMount from H-Squared.
The TC has been through a myriad of configurations in an attempt to create a stable wireless environment since its purchase in April. Prior to my recent holiday (two weeks in Greece - hurrah!), the current configuration was solid for both Macs.
The config is: Bridge mode; 2.4Ghz N Only wireless; WPA2 secured; no MAC address access control restrictions (so pretty straightforward). The TC is running firmware 7.3.1. It is setup as "Create a Wireless Network"
Both Macs are running OS X 10.5.3 with all of the latest updates including AirPort Utility 5.3.2.
It took me about six weeks to hit upon this config for the TC having had many wireless drop outs, stalled connections, lost internet connections (ie. I could access the TC HDD but could not access the internet using the same wireless connection). So much frustration in the early days - I tried many of the solutions on this forum but to no avail until I hit upon the 2.4Ghz N Only route which seemed to be the answer to all my problems.
Prior to leaving on holiday, I unplugged all of the equipment in the room including the TC and the router. When I returned, I restarted everything in a logical sequence - router first (and waited for a connection), then the TC and then the Macs.
From this point on the problems have started. The PB G4 with the wireless card has a more or less stable connection. The wireless card connects immediately to the TC but then it takes approximately 30-60 seconds for an internet connection to work (so I see a lot of the Not connected to the internet messages in Safari). It seems to immediately get an IP address from the router via the TC but then the internet connection itself takes a while to come up.
The MPB on the other hand is a nightmare. Since returning from holiday I have not been able to get a workable wireless connection at all. In no particular order, the problems that the MBP exhibits are as follows (these can occur at the same time or individually):
i) only returns a self-assigned IP address; renewing the DHCP lease does not fix the problem
ii) does not see the network at all (although it will see others in the vicinity)
iii) cannot connect to the network - returns the Connection Timeout error or very occasionally the Password Incorrect error; I have tried connecting the network via the AirPort menu bar item, via Join another network... from the menu bar, via the Network selection menu in System Preferences > Network and even via Internet Connect - all with no success
iv) sometimes I am able to connect to the network but no IP address is received. Having checked the TC logs, it shows the same error occurring over and over again:
Jun 26 22:06:04 Severity:5 Associated with station 00:1e:c2:ba:78:6c
Jun 26 22:06:07 Severity:5 Deauthenticating with station 00:1e:c2:ba:78:6c (reserved 2).
Jun 26 22:06:07 Severity:5 Disassociated with station 00:1e:c2:ba:78:6c
The MBP connects but is immediately thrown off the network.
So to all intents and purposes, the wireless aspect of the MBP and the TC are completely useless.
When I use a wired (ethernet) connection to the TC everything is joyful. Instant IP address assignment, excellent connection speeds, no drop outs and so on. So as far as I can ascertain, the TC is working fine with the exception of the wireless/wireless security.
The AEBSn that is connected to the same network no longer appears in Airport Utility.
Having read through many posts here, I have tried many solutions including:
- downgrading the FW to 7.3; no difference at all
- turning off wireless security; no difference at all
- changing channels; I've tried 1, 6, 9, 11 and 13 with no difference at all
- changing the wireless mode; B/G, G only, N only all make no difference (I can't use 5Ghz N only as the PB G4 does not support this and I need both Macs wirelessly connected)
- rebooting the TC (both via Airport Utility and 'power off'); makes no difference
- reinstalled OS X 10.5.1 (via the install disks that came with the MBP) using the Archive & Install feature; then used the Combo updater to upgrade directly to 10.5.3; once again, no difference.
I have not yet done a hard reset as this has made no difference in the past but obviously I will try it.
In other words, HELP!
I am stymied. I have tried so many solutions offered on here and on the likes of MacFixIt and other Mac forums none of which have brought back my wireless connection for the MBP.
The MBP works very well with other wireless connection. For example, at work, we have a Linksys WRT54G wireless router connected to a BT leased line. I have not had a single connection issue for three months with this setup. Similarly, whilst on holiday, I used many different hot spots and had no issues with the wireless connection. All of this evidence leads me to suspect that the MBP is not the issue.
From what I can tell, the problem seems to be in the wireless security on the TC. It seems to prevent access by MBP (though not the PB G4 using a wireless card) but disabling security did not change the error messages shown in the log or the lack of connectivity.
It is a real shame that I cannot get a satisfactory working environment with the TC as the concept is great. The reality is, however, that it is unusable in its current condition and loathe as I am to try and return it or replace it, I am rapidly coming the conclusion I will have to.
Before I do, however, I am hoping that the genii who exist on these forums may be able to proffer some ideas or solutions that I haven't yet tried.
My sincere thanks will go to anyone who provides a solution for me. There may even be beer involved as a mark of gratitude!!
Thanks for reading and fingers crossed someone knows something special...

Smokerz: thanks for the reply and the advice. Not really in a position to set up a dual network at the moment due to the positioning of the TC and the AEBS but if I get an opportunity to try it I will.
I have temporarily given up with the TC as the router for the wireless network. I've installed a Vigor 2820n modem router (it's the only one I could find that has a Gigabit port - only one though) as well being a modem (ADSL) router. Thus far, everything seems fine - although I have had a couple of drop outs due (I think) the AirPort connection on the MBP. And interestingly, I've set up the TC as a "test" wireless network using the Vigor's internet connection and it's way more stable than with the Netgear router. So perhaps it's a combination of many factors - the poor Netgear router, the TC and the MBP AirPort connection - that was causing the issues.
I'll give 10.5.4 a go as well and see if that helps at all.
Thanks to all who read the question - if anyone else has thoughts I'd be delighted to hear them.

Detect loss of wireless connection

GOAL : physicians in a hospital getting access to web-based JSP content through a Pocket PC browser(IE) and wireless connectivity. We already have the "normal-size" JSP pages for desktop computers and we'd like just to provide a reduced version of theses pages to browse on a PDA.
PROBLEM : Even with a well designed WLAN with good access point placement, you may experience connection loss. And it's a problem when browsing JSP pages : imagine submitting a form when you're suddenly offline : you'll get a 404 or something similar -> not serious.
QUESTION : If I port our application in the Personal Profile Xlet framework, Would it be possible to detect connection loss in an Xlet or somewhat... then it could set the rest of the app to work in a kind of degraded mode. How can we manage that ?

You could have a thread which is dedicated to managing the apparent connectivity. It connects to a well known location, if it cannot connect then you are assumed to be disconnected and the application should downgrade. The routines that handle networking should be able to fail gracefully and not generate exceptions which would terminate the program. As an example you can update your stocks whenever theres a connection but if there isn't one you can always show the value and the last time it was successfully retrieved.

Update to 10.4.11 causes loss of application launching

For some weird reason after updating Leopard Server 10 10.4.11 Build 8S169 from 10.4.10 causes the loss of application launching after a few minutes of activity.
All services appear to be running. All clients are able to connect to the server and FM Server 8.0V2 which is also running on this server still seems to be running fine. The configuration is 3.5GB RAM, Dual 500GB SATA using SoftRAID mirroring.
I can connect to the FM Server using FM Server Admin but CANNOT connect with the Server Admin Tools which have also been updated to 10.4.11.
I can't login using slogin either. I CAN connect using ChickenoftheVNC but it doesn't do me any good as I cannot launch anything.
I have reapplied the combo update 10.4.11 to no result as the same thing happens after 10 minutes. Any applications that ARE running continue to behave normally.
The error I am getting is -10810 which is a non-specific unexpected internal error.
Anyone have any ideas?
Thanks!
Asa

Hi
I remember a few people with this problem after updating - but having searched briefly, I can't find a specific fix.
However - I do suggest you download & apply the 10.4.6 Combo Update.
The combo update does seem to fix a number of different issues that users have had after installing the standard 10.4.6 update.... so it's certainly worth a try.

IChat causes loss of internet connection

I keep losing my internet connection when using iChat (video).
About a month ago I started having intermittent problems with my Comcast cable modem connection. I would lose the connection to the internet, requiring power-cycling the modem to regain it. At its worst, it happened 5x a day, but usually it was once a day. Then I'd go for a long stretch of days with no problems.
More recently my iChat experience degraded. In an hour's chat, I would lose the internet connection 3-4 times.
A few days ago I finally had time to drive the modem to a Comcast office to get it replaced. That same weekend I upgraded my MacBook to Snow Leopard. The internet connection has been solid ever since -- except during the iChat I had yesterday.
I lost the connection four times, but now the modem finds it again without requiring power cycling.
I only use iChat with one other person (my sister, also on Comcast, across the country), so I can't do extensive testing. My sister uses iChat weekly with my parents (video iChat, also using Comcast, in the same town as I am, using a 2009 iMac) and they have no problems.
At the end of the most recent chat, I downgraded the speed to 200kbps. The sound was worse (very muddy) and the picture wasn't as good. I didn't lose the connection, but it generally takes about 10 minutes to fail, and we didn't chat that long at the reduced connection speed. So I can't really say if that helped.
I suspect this is a Comcast problem, but I'm not sure. Their bandwidth caps and hardware "upgrades" have caused all sorts of headaches for me in the past, and there seems to be no way to get accurate information out of them. I have no idea if they're capping my speed, degrading my service, or what.
I'm posting here in the hopes that there is some unknown setting or other trick that I can use in iChat to solve this problem. It's unusable as-is, and very frustrating because it used to be better (and because my parents have no problems).

Whoops, I forgot to add that we're both using MobileMe and Airport Extremes. My sister is wireless and I've tried it both ways (no difference).
The iChat error message that appears when the internet connection is lost and the chat fails is something about "no data received in 10 seconds". The following is the only iChat-specific console log data I could find:
Nov 16 10:04:24 Hawthorne iChatAgent[4966]: [Warning] [AIM] Could not change my visibility to 0
Nov 16 10:04:48 Hawthorne iChat[4964]: ------ startPreview: previewing: 2
Nov 16 10:04:58 Hawthorne iChat[4964]: attribute = {\n VCSupportARDAudioMux = 0;\n shouldFindExternalIP = 1;\n}
Nov 16 10:05:03 Hawthorne iChat[4964]: 111.729685 ICE Attempt ()
Nov 16 10:05:04 Hawthorne iChat[4964]: 112.093984 ICE Success ()
Nov 16 10:05:29 Hawthorne iChat[4964]: 137.502603 Attempt call: Callee
Nov 16 10:05:29 Hawthorne iChat[4964]: 137.502688 Relay Skip ()
Nov 16 10:05:29 Hawthorne iChat[4964]: 137.502739 Viceroy 1.3
Nov 16 10:05:29 Hawthorne iChat[4964]: 137.502781 Secured
Nov 16 10:05:29 Hawthorne iChat[4964]: 137.502821 Not Audio Only
Nov 16 10:05:29 Hawthorne iChat[4964]: 137.502863 Duration = 22
Nov 16 10:05:29 Hawthorne iChat[4964]: 137.502906 AvgBitrateDown = 1918.423500
Nov 16 10:05:29 Hawthorne iChat[4964]: 137.502950 iP2PBWUp / Down = 2098 / 2098
Nov 16 10:05:29 Hawthorne iChat[4964]: 137.503007 (Callee) CallLog(0 - Succeeded) [0x00000102 to 0x00000000] [Up: 2098 Down: 2098] [22(sec)] [AvgBitrate:1918.423500][RemoteHangup][RemoteUA:Viceroy 1.3][Non-SL]
Nov 16 10:05:40 Hawthorne iChat[4964]: ------ startPreview: previewing: 2
Nov 16 10:05:46 Hawthorne iChat[4964]: attribute = {\n VCSupportARDAudioMux = 0;\n shouldFindExternalIP = 1;\n}
Nov 16 10:05:47 Hawthorne iChat[4964]: 154.949693 ICE Attempt ()
Nov 16 10:05:47 Hawthorne iChat[4964]: 155.262658 ICE Success ()
Nov 16 10:05:49 Hawthorne [0x0-0x379379].com.apple.iChat[4964]: resetting echo canceller
Nov 16 10:08:23 Hawthorne iChat[4964]: 311.555334 Attempt call: Callee
Nov 16 10:08:23 Hawthorne iChat[4964]: 311.555500 Relay Skip ()
Nov 16 10:08:23 Hawthorne iChat[4964]: 311.555558 Viceroy 1.3
Nov 16 10:08:23 Hawthorne iChat[4964]: 311.555606 Secured
Nov 16 10:08:23 Hawthorne iChat[4964]: 311.555654 Not Audio Only
Nov 16 10:08:23 Hawthorne iChat[4964]: 311.555702 Duration = 153
Nov 16 10:08:23 Hawthorne iChat[4964]: 311.555752 AvgBitrateDown = 0.000000
Nov 16 10:08:23 Hawthorne iChat[4964]: 311.556083 iP2PBWUp / Down = 2627 / 2627
Nov 16 10:08:23 Hawthorne iChat[4964]: 311.556213 (Callee) CallLog(-20 - Failed) [0x00000102 to 0x00000000] [Up: 2627 Down: 2627] [153(sec)] [AvgBitrate:0.000000][noPacketsFromParty][RemoteUA:Viceroy 1.3][Non-SL]
Nov 16 10:08:23 Hawthorne mDNSResponder[29]: Double NAT (external NAT gateway address 192.168.100.2 is also a private RFC 1918 address)
Nov 16 10:08:53: --- last message repeated 5 times ---
Nov 16 10:09:06 Hawthorne iChat[4964]: ------ startPreview: previewing: 2
Nov 16 10:09:06 Hawthorne iChat[4964]: attribute = {\n VCSupportARDAudioMux = 0;\n shouldFindExternalIP = 1;\n}
Nov 16 10:09:18 Hawthorne iChat[4964]: 366.304304 ICE Attempt ()
Nov 16 10:09:18 Hawthorne iChat[4964]: 366.667889 ICE Success ()
Nov 16 10:09:21 Hawthorne [0x0-0x379379].com.apple.iChat[4964]: resetting echo canceller
Nov 16 10:16:38 Hawthorne iChat[4964]: 806.869120 Attempt call: Caller
Nov 16 10:16:38 Hawthorne iChat[4964]: 806.869217 Relay Skip ()
Nov 16 10:16:38 Hawthorne iChat[4964]: 806.869288 Viceroy 1.3
Nov 16 10:16:38 Hawthorne iChat[4964]: 806.869336 Not secured
Nov 16 10:16:38 Hawthorne iChat[4964]: 806.869384 Not Audio Only
Nov 16 10:16:38 Hawthorne iChat[4964]: 806.869433 Duration = 437
Nov 16 10:16:38 Hawthorne iChat[4964]: 806.869482 AvgBitrateDown = 784.989625
Nov 16 10:16:38 Hawthorne iChat[4964]: 806.870512 iP2PBWUp / Down = 2043 / 2043
Nov 16 10:16:38 Hawthorne iChat[4964]: 806.870699 (Caller) CallLog(0 - Succeeded) [0x00000102 to 0x00000000] [Up: 2043 Down: 2043] [437(sec)] [AvgBitrate:784.989625][EndConference][RemoteUA:Viceroy 1.3][Non-SL]
Nov 16 10:16:43 Hawthorne mDNSResponder[29]: Double NAT (external NAT gateway address 192.168.100.2 is also a private RFC 1918 address)
Nov 16 10:17:37: --- last message repeated 5 times ---
Nov 16 10:17:37 Hawthorne iChat[4964]: ------ startPreview: previewing: 2
Nov 16 10:17:37 Hawthorne iChat[4964]: attribute = {\n VCSupportARDAudioMux = 0;\n shouldFindExternalIP = 1;\n}
Nov 16 10:17:48 Hawthorne iChat[4964]: 876.819367 ICE Attempt ()
Nov 16 10:17:49 Hawthorne iChat[4964]: 877.182767 ICE Success ()
Nov 16 10:17:52 Hawthorne [0x0-0x379379].com.apple.iChat[4964]: resetting echo canceller
Nov 16 10:32:15 Hawthorne iChat[4964]: 1743.749165 Attempt call: Caller
Nov 16 10:32:15 Hawthorne iChat[4964]: 1743.749262 Relay Skip ()
Nov 16 10:32:15 Hawthorne iChat[4964]: 1743.749367 Viceroy 1.3
Nov 16 10:32:15 Hawthorne iChat[4964]: 1743.749417 Not secured
Nov 16 10:32:15 Hawthorne iChat[4964]: 1743.749465 Not Audio Only
Nov 16 10:32:15 Hawthorne iChat[4964]: 1743.749514 Duration = 863
Nov 16 10:32:15 Hawthorne iChat[4964]: 1743.749565 AvgBitrateDown = 530.957437
Nov 16 10:32:15 Hawthorne iChat[4964]: 1743.749782 iP2PBWUp / Down = 2434 / 2434
Nov 16 10:32:15 Hawthorne iChat[4964]: 1743.749911 (Caller) CallLog(0 - Succeeded) [0x00000102 to 0x00000000] [Up: 2434 Down: 2434] [863(sec)] [AvgBitrate:530.957437][EndConference][RemoteUA:Viceroy 1.3][Non-SL]
Nov 16 10:32:17 Hawthorne mDNSResponder[29]: Double NAT (external NAT gateway address 192.168.100.2 is also a private RFC 1918 address)
Nov 16 10:32:31: --- last message repeated 4 times ---
Nov 16 10:32:31 Hawthorne iChat[4964]: ------ startPreview: previewing: 2
Nov 16 10:32:33 Hawthorne mDNSResponder[29]: Double NAT (external NAT gateway address 192.168.100.2 is also a private RFC 1918 address)
Nov 16 10:32:56 Hawthorne iChat[4964]: ------ startPreview: previewing: 2
Nov 16 10:32:56 Hawthorne iChat[4964]: attribute = {\n VCSupportARDAudioMux = 0;\n shouldFindExternalIP = 1;\n}
Nov 16 10:33:26 Hawthorne ntpd[244]: time reset +0.285562 s
Nov 16 10:33:30 Hawthorne iChat[4964]: 1818.092031 ICE Attempt ()
Nov 16 10:33:30 Hawthorne iChat[4964]: 1818.456037 ICE Success ()
Nov 16 10:33:33 Hawthorne [0x0-0x379379].com.apple.iChat[4964]: resetting echo canceller
Nov 16 10:37:36 Hawthorne mDNSResponder[29]: Double NAT (external NAT gateway address 192.168.100.2 is also a private RFC 1918 address)
Nov 16 10:37:36: --- last message repeated 1 time ---
Nov 16 10:37:36 Hawthorne iChat[4964]: 2064.632881 Attempt call: Caller
Nov 16 10:37:36 Hawthorne iChat[4964]: 2064.632968 Relay Skip ()
Nov 16 10:37:36 Hawthorne iChat[4964]: 2064.633022 Viceroy 1.3
Nov 16 10:37:36 Hawthorne iChat[4964]: 2064.633068 Not secured
Nov 16 10:37:36 Hawthorne iChat[4964]: 2064.633110 Not Audio Only
Nov 16 10:37:36 Hawthorne iChat[4964]: 2064.633154 Duration = 243
Nov 16 10:37:36 Hawthorne iChat[4964]: 2064.633198 AvgBitrateDown = 0.000000
Nov 16 10:37:36 Hawthorne iChat[4964]: 2064.633294 iP2PBWUp / Down = 2413 / 2413
Nov 16 10:37:36 Hawthorne iChat[4964]: 2064.633710 (Caller) CallLog(-20 - Failed) [0x00000102 to 0x00000000] [Up: 2413 Down: 2413] [243(sec)] [AvgBitrate:0.000000][noPacketsFromParty][RemoteUA:Viceroy 1.3][Non-SL]
Nov 16 10:37:37 Hawthorne mDNSResponder[29]: Double NAT (external NAT gateway address 192.168.100.2 is also a private RFC 1918 address)
Nov 16 10:37:47: --- last message repeated 2 times ---
Nov 16 10:37:47 Hawthorne iChat[4964]: ------ startPreview: previewing: 2
Nov 16 10:37:51 Hawthorne mDNSResponder[29]: Double NAT (external NAT gateway address 192.168.100.2 is also a private RFC 1918 address)
Nov 16 10:38:11 Hawthorne iChat[4964]: ------ startPreview: previewing: 2
Nov 16 10:38:11 Hawthorne iChat[4964]: attribute = {\n VCSupportARDAudioMux = 0;\n shouldFindExternalIP = 1;\n}
Nov 16 10:38:32 Hawthorne iChat[4964]: 2120.585977 ICE Attempt ()
Nov 16 10:38:33 Hawthorne iChat[4964]: 2120.899403 ICE Success ()
Nov 16 10:38:35 Hawthorne [0x0-0x379379].com.apple.iChat[4964]: resetting echo canceller
Nov 16 10:48:13 Hawthorne iChat[4964]: 2701.500597 Attempt call: Caller
Nov 16 10:48:13 Hawthorne iChat[4964]: 2701.500690 Relay Skip ()
Nov 16 10:48:13 Hawthorne iChat[4964]: 2701.500767 Viceroy 1.3
Nov 16 10:48:13 Hawthorne iChat[4964]: 2701.500818 Not secured
Nov 16 10:48:13 Hawthorne iChat[4964]: 2701.500864 Not Audio Only
Nov 16 10:48:13 Hawthorne iChat[4964]: 2701.500911 Duration = 577
Nov 16 10:48:13 Hawthorne iChat[4964]: 2701.500960 AvgBitrateDown = 657.808437
Nov 16 10:48:13 Hawthorne iChat[4964]: 2701.501012 iP2PBWUp / Down = 2610 / 2610
Nov 16 10:48:13 Hawthorne iChat[4964]: 2701.501074 (Caller) CallLog(0 - Succeeded) [0x00000102 to 0x00000000] [Up: 2610 Down: 2610] [577(sec)] [AvgBitrate:657.808437][EndConference][RemoteUA:Viceroy 1.3][Non-SL]
Nov 16 10:48:18 Hawthorne iChat[4964]: ------ startPreview: previewing: 2
Nov 16 10:48:18 Hawthorne mDNSResponder[29]: Double NAT (external NAT gateway address 192.168.100.2 is also a private RFC 1918 address)
Nov 16 10:48:37: --- last message repeated 5 times ---
Nov 16 10:48:37 Hawthorne iChat[4964]: ------ startPreview: previewing: 2
Nov 16 10:49:18 Hawthorne iChat[4964]: ------ startPreview: previewing: 2
Nov 16 10:49:18 Hawthorne iChat[4964]: attribute = {\n VCSupportARDAudioMux = 0;\n shouldFindExternalIP = 1;\n}
Nov 16 10:49:36 Hawthorne iChat[4964]: 2784.081867 ICE Attempt ()
Nov 16 10:49:36 Hawthorne iChat[4964]: 2784.445181 ICE Success ()
Nov 16 10:49:36 Hawthorne [0x0-0x379379].com.apple.iChat[4964]: DeviceManager_SynchAudioProcessingToNewInternalSampleRate = 8000, 160
Nov 16 11:00:54 Hawthorne iChat[4964]: 3462.133781 Attempt call: Caller
Nov 16 11:00:54 Hawthorne iChat[4964]: 3462.133874 Relay Skip ()
Nov 16 11:00:54 Hawthorne iChat[4964]: 3462.133941 Viceroy 1.3
Nov 16 11:00:54 Hawthorne iChat[4964]: 3462.133988 Not secured
Nov 16 11:00:54 Hawthorne iChat[4964]: 3462.134034 Not Audio Only
Nov 16 11:00:54 Hawthorne iChat[4964]: 3462.134081 Duration = 674
Nov 16 11:00:54 Hawthorne iChat[4964]: 3462.134129 AvgBitrateDown = 2151.021000
Nov 16 11:00:54 Hawthorne iChat[4964]: 3462.134178 iP2PBWUp / Down = 2410 / 2410
Nov 16 11:00:54 Hawthorne iChat[4964]: 3462.134239 (Caller) CallLog(0 - Succeeded) [0x00000102 to 0x00000000] [Up: 2410 Down: 2410] [674(sec)] [AvgBitrate:2151.021000][EndConference][RemoteUA:Viceroy 1.3][Non-SL]
Nov 16 11:00:57 Hawthorne iChat[4964]: [Warning] FZVideoConferenceController: _localVideoClientCount decremented below 0!
Nov 16 11:01:02: --- last message repeated 10 times ---
Nov 16 11:01:02 Hawthorne loginwindow[30]: loginwindow SleepWakeCallback WILL sleep
Nov 16 11:28:17 Hawthorne loginwindow[30]: loginwindow SleepWakeCallback will power on, Currenttime:11/16/2009 11:28:17.032 AM - Waketime:11/16/2009 11:28:16.010 AM = Deltatime:1.022415102

Loss of Wireless Connectivity

Hello Everyone,
I am having a major problem with my wireless network. At random intervals, I notice my wireless network speed (54mbps) slowly decrease from 54 -> 48 -> down to -> 4 -> 2 -> 1 -> dies. My wireless router then goes off for anywhere between 10s to 10 minutes, or sometimes it can even be down for 45 minutes.
I've encountered this ever since I moved my PC from across my room, though I believe it happened rarely before hand as well. Ive since tried using programs to determine the best connection (which Ive finally achieved). Also due to the building, I cannot run a wired line to my computer. My computer sits about 25-30 feet away from the router, almost a 45 degree angle above it (2nd floor, router access point is on the 1st).
Another note: Its not just my personal computer that loses wireless, the entire network dies at the same time. Though, the WIRED network that is connected to the router receives no interuption. I have exchange students that board at my house from time to time, along with the other main computer that resides in the room with the router, and neither receive connection hiccups or loss of network bandwidth. Also during this time my Wireless PCI card in my tower can still detect other networks (though very weak due to range)
As a thought, my router was about 2 years old, so I recently upgraded it from WRT54G to a WRT300N. The issue is just as frequent.
As for specifics:
Network:
Old Router: WRT54G (2 1/2 years old)
New Router: WRT300N
-- Router runs WEP encrypt, Ive recently turned off MAC filtering, tested both Channel 1 and Channel 10 (6 is overloaded with 2-3 other routers in the area).
Wiress PCI Card: WMP54GS (90% sure I have the Speedbooster Version)
-- My PCI card has a 7db antenna attached on a 1.5m chord.
Cable Modem (About 8 years old, unfortunately)
Computer Setup
Windows XP Pro 32bit
ZoneAlarm Firewall / AVG Virus Scanner
Intel Quadcore @ 2.4ghz / 2gb Ram @1066 / Dual Harddrives
Side Note: I live about 100-200 metres away from a Canadian Forces Naval Base. I hadn't had any major connection issues prior to moving my computer 16 feet over to the other corner of my room, but unsure if military base could provide wireless interuptions as Im describing.
The only other thing I can think of at this time is range, as Ive gotten my connection down to a 30 based Signal to Noise ratio (Used Netstumbler to determine)
Also plan to upgrade my PCI card to N shortly, though depending.
Any thoughts or help would be greatly appreciated! Thank you!
-David Bright

I cannot confirm that other Wireless routers in my area share this same issue. I haven't tried to update firmware yet, as from the few I had talked to you generally don't want to touch something like that until a last resort.
I use a program called "Netstumbler" to detect other networks around me. As best as I can tell, when my router disappears off the grid, a lot of other routers do as well. I've used Channel 1 on G frequencies because the average number is as follows:
Channels:
1 - 1 person (me)
6 - 4 people (unknown)
11 - 1 person (close neighbour).
As to which neighbours are using wirless routers, Im unsure. About 30 meters away from my router, as mine unfortunately is placed agaisnt the house wall, is a complex that houses about 20-25 families. My computer also shares the same wall, but a floor above (like stated) for connectivity.
As for firmware, I believe I'll have a look into which Im running and hopefully update. I think it might not hurt even looking into an update for my PCI card as well.
Anymore help regarding this issue is appreciated. Thank you

Sudden slowness and loss of wireless connection to PC

I've used my Dell laptop on my Airport Extreme wireless network without problem for two years. Yesterday, after installing an HP 8500 printer on the network, my PC became extraordinarily slow on the network, and kept losing its connection. I haven't been able to get it fixed. I've reinstalled the airport extreme, I've reset the cable modem and have turned my firewall off, but nothing has worked. I also uninstalled the printer, but that didn't help either. Any ideas for other things I can try? The imac and iphones connected to this network are still functioning fine, as is the printer, which I've now re-installed. It's just my Dell laptop that is not. Oh, btw, I took the laptop to a wireless hotspot this afternoon, and had no problem connecting to that network.

Update: Reverted to firmware version 7.4.2 and the problem was instantly solved. Hallelujah!

Loss of wireless connection with 350n

I am having a terrible time with loss of connection with my 350 N wireless router. The router itself is on top of a bookshelf less than 50 feet away from both of my wireless desktops, and faces straight down the hallway that both rooms the computers are in open from. Often when I start up my computer it refuses to acknowledge that there is a wireless network present in the house and the only way I can make it detect it is if I powercyle the router--which is a pain. Even sitting directly next to the router it will never recognize better than 85% signal strength. And when I load (not play, just initiate loading) download-heavy content such as streaming video or an MMORPG program the connection will often drop and then reconnect seconds later. Upon performing a speed test it unfailingly indicates that my upstream is twice as fast as my downstream, which reads at only around 1165 Mbps--which is absurd as my modem is provisioned for and often surpasses 16000Mbps. What on earth is going on and what can I do to overcome it? I'm getting desperate here.

I have fixed my problem by upgrading the router firmware to version 1.03.7 from version 1.03.5.
The issue I had upgrading the router was it would fail at about 80% when using the router to do the upgrade soooooo, this is how I did it ( stolen from another thread )
Be warned! If you do the below and you have custom setting on the router you need to write those setting down first!!!!!!
1. Download tftp.exe using this link (ftp://ftp.linksys.com/pub/network/tftp.exe)
2. Download the new firmware (version 1.03.7) at Linksys download site
3. Reset your router by pushing and holding the reset button in the rear for 30sec
4. Configure a static IP address (192.168.1.50 with Subnet Mask 255.255.255.0) on YOUR PC
5. Connect a network cable from your PC to your router
6. Test that your PC is talking to the router by openning a DOS window and type "ping 192.168.1.1" (without the paranthesis) and you should get 3 replies.
7. Double click on the tftp.exe
8. Type in the IP Address for the Server: 192.168.1.1
9. Password is "password" (WITHOUT the paranthesis)
10. For the BIN file, click on the square-button and browse to the BIN file that you've downloaded from the LinkSys Site (WRT350N_1.03.7_US_code.bin)
11. Click on Upgrade
12. After the upgrade is successful, perform the reset, again. IMPORTANT!!!! PUSH AND HOLD THE RESET BUTTON FOR 30sec then let go.
13. POWER light should be blinking during boot up then stay SOLID
14. Now, change YOUR PC IP seeting back to what they were before you started this process.
15. Start InternetExploder and surf the net
16. GOODLUCK!!!
As soon as I did this, my laptop wireless started working 100% and right away.

Loss of wireless connection

I've completely lost my wireless connection to my home hub although I can connect through an ethernet cable. I can connect to a wi fi hotspot. This has happened before and phoning the helpline has got it working again. This time I was told I need a new router and would get one if I renewed my contract. As a 10 yr customer I wasn't happy! If I refresh the network list, my home hub is there but the connect failure message mentions TCP/IP is not configured although settings of my adapter say it is. I've tried another router but exactly the same thing happens. This is also the scenario on the stepsons macbook. Any thoughts?

There is some help on this page.
Wireless connection problems
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

When trying to update the i phone " fault 1630" occurs - both when connected to WLAN or USB. What can I do?

When trying to update my i phone IOS 5.0 (connected by WLAN and USB to my computer) there is always "fault 1630" saying I`ve got no connection to the internet / network, which seems to be wrong to me (phone is online). What can I do?

C Mawle wrote:
Thanks. I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
Yes it would, possibly even brick it.
Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
Can I use my ipod nano USB connector to check?
It is not much help to you, since the device that you need still not recognized.
Anyway looks like I may have to swallow the loss of data. Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
Good luck, but if you expect miracle from that call good luck again.

HT1766 i update my phone today but i loss backup important data & there is no backup in icloud

i update my phone today but i loss backup important data & there is no backup in icloud

This feature is only availabe if you are currently running ios 5.
Update as always.
Turn on computer.
Open itunes
Connect iphone

ORA-14402: updating partition key column would cause a partition change

Hi,
When I am trying to execute an update statement where i am tring to update date values emp_det from 11-oct-2010 to 12-nov-2010.
Oracle throws an error :
ORA-14402
updating partition key column would cause a partition change
I think that this is because emp_det is a partitioning key of a partitioned table.
Oracle documentation says that
"UPDATE will fail if you change a value in the column that would move the
row to a different partition or subpartition, unless you enable row
movement" .
alter table t enable row movement;
I did not understand what is meant by "enable row movement".
I cannot drop the partitions and recreate it after updating the table and also i don't have proper priviliges for enale row movement syntax
because of the lack of privileges. How to solve this is issues with out row movement and recreate partition.
Can this be done by a developer or is there any other way to execute update in this case? its urgent.. pls help..
thanks in advance..
By
Sivaraman
Edited by: kn_sivaraman on Nov 1, 2010 2:32 AM

kn_sivaraman wrote:
I did not understand what is meant by "enable row movement". Each partition in partitioned table is physically separate segment. Assume you have a row that belongs to partition A stored in segment A and you change row's partitioning column to value that belongs to partition B - you have an issue since updated row can't be now stored in segment A anymore. By default such update is not allowed and you get an error. You can enable row movement and Oracle will move row to target partition:
SQL> CREATE TABLE SALES_LIST(
2                          SALESMAN_ID NUMBER(5,0),
3                          SALESMAN_NAME VARCHAR2(30),
4                          SALES_STATE VARCHAR2(20),
5                          SALES_AMOUNT NUMBER(10,0),
6                          SALES_DATE DATE
7                         )
8    PARTITION BY LIST(SALES_STATE)
9    (
10     PARTITION SALES_WEST     VALUES('California', 'Hawaii'),
11     PARTITION SALES_EAST     VALUES('New York', 'Virginia', 'Florida'),
12     PARTITION SALES_CENTRAL VALUES('Texas', 'Illinois'),
13     PARTITION SALES_OTHER    VALUES(DEFAULT)
14    )
15 /
Table created.
SQL> insert
2    into sales_list
3    values(
4           1,
5           'Sam',
6           'Texas',
7           1000,
8           sysdate
9          )
10 /
1 row created.
SQL> update sales_list
2    set sales_state = 'New York'
3    where sales_state = 'Texas'
4 /
update sales_list
ERROR at line 1:
ORA-14402: updating partition key column would cause a partition change
SQL> alter table sales_list enable row movement
2 /
Table altered.
SQL> update sales_list
2    set sales_state = 'New York'
3    where sales_state = 'Texas'
4 /
1 row updated.
SQL> SY.

Update to 10.5.2 caused loss of wireless connectivity

Similar Messages

Maybe you are looking for