Update to 10.6.7 caused issues

Up until the recent 10.6.7 my Macbook Pro was running fine. After the update, the computer wouldn't boot past the gray boot screen. I searched and found to do a Safe Boot. I did that and the computer booted fine but a bit slowly. I was able to run normally for a while, but I noticed that some actions in Safari, like opening Gmail or playing a Flash game was painfully slow. I attempted to uninstall Flash, but the installer quits unexpectedly. I attempted to install the Google Voice and Video plugin, but that does the same. I've repaired the file permissions several times, which found a lot the first time, and ran a verify disk, but to no avail.
Any suggestions would be greatly appreciated.

160GB Hard Drive with 48GB free
I have Time Machine running to a USB HDD attached to an Airport Extreme
Verify Disk said that the drive appears to be okay
I can't install Flash, I get an error that the Flash Installer Quit unexpectedly
As an experiment, last night I booted back into safe mode, and one of the applications that wouldn't run started up fine.
I also ran a check of the fonts in the Font Book, and it said that they all came up fine.
I'm starting to think the writing is on the wall, that I'll have to wipe the drive and reinstall.

Similar Messages

Latest update 11.2.202.228 causing issues

I'm a musician and have a custom Flash-based media player on my webpage. It has worked flawlessly since I created it a few years ago. After the update to version 11.2.202.228, it has now ceased to work. Clicking on the buttons, controls, and playlist items does nothing now. It happens in Windows 7 and Vista (both up to date), and in IE 8, Firefox, Opera, and Safari (also all up to date). The only system it still works on is my Android tablet.
Following the instructions provided elsewhere here, I managed to revert back to the previous Flash version and all was well again. However, I don't want to continue using an insecure version. Also, my main concern is others visiting my webpage and not having a functioning media player. Is there anything that can be done about this?
~PJ

Could you please open a new bug report on this over at bugbase.adobe.com? We'll need steps to reproduce and a link to your site (or code/.swf) If you'd like to keep anything private, please feel free to email me at [email protected] with your bug number and forum url and I'll add the attachments for internal use only.
Finally, please post back with the URL so that others affected can add their comments and votes.

ORA-14402: updating partition key column would cause a partition change

Hi,
When I am trying to execute an update statement where i am tring to update date values emp_det from 11-oct-2010 to 12-nov-2010.
Oracle throws an error :
ORA-14402
updating partition key column would cause a partition change
I think that this is because emp_det is a partitioning key of a partitioned table.
Oracle documentation says that
"UPDATE will fail if you change a value in the column that would move the
row to a different partition or subpartition, unless you enable row
movement" .
alter table t enable row movement;
I did not understand what is meant by "enable row movement".
I cannot drop the partitions and recreate it after updating the table and also i don't have proper priviliges for enale row movement syntax
because of the lack of privileges. How to solve this is issues with out row movement and recreate partition.
Can this be done by a developer or is there any other way to execute update in this case? its urgent.. pls help..
thanks in advance..
By
Sivaraman
Edited by: kn_sivaraman on Nov 1, 2010 2:32 AM

kn_sivaraman wrote:
I did not understand what is meant by "enable row movement". Each partition in partitioned table is physically separate segment. Assume you have a row that belongs to partition A stored in segment A and you change row's partitioning column to value that belongs to partition B - you have an issue since updated row can't be now stored in segment A anymore. By default such update is not allowed and you get an error. You can enable row movement and Oracle will move row to target partition:
SQL> CREATE TABLE SALES_LIST(
2                          SALESMAN_ID NUMBER(5,0),
3                          SALESMAN_NAME VARCHAR2(30),
4                          SALES_STATE VARCHAR2(20),
5                          SALES_AMOUNT NUMBER(10,0),
6                          SALES_DATE DATE
7                         )
8    PARTITION BY LIST(SALES_STATE)
9    (
10     PARTITION SALES_WEST     VALUES('California', 'Hawaii'),
11     PARTITION SALES_EAST     VALUES('New York', 'Virginia', 'Florida'),
12     PARTITION SALES_CENTRAL VALUES('Texas', 'Illinois'),
13     PARTITION SALES_OTHER    VALUES(DEFAULT)
14    )
15 /
Table created.
SQL> insert
2    into sales_list
3    values(
4           1,
5           'Sam',
6           'Texas',
7           1000,
8           sysdate
9          )
10 /
1 row created.
SQL> update sales_list
2    set sales_state = 'New York'
3    where sales_state = 'Texas'
4 /
update sales_list
ERROR at line 1:
ORA-14402: updating partition key column would cause a partition change
SQL> alter table sales_list enable row movement
2 /
Table altered.
SQL> update sales_list
2    set sales_state = 'New York'
3    where sales_state = 'Texas'
4 /
1 row updated.
SQL> SY.

Explorer InfoSpaces on HANA Views - column label changes cause issues?

Key question is – do simply label changes in HANA view cause issues with Explorer InfoSpaces? Furthermore, on source view changes, does the InfoSpace also need to be adjusted?
What we have observed is this
1. InfoSpaces have been created using the “SAP HANA appliance” connection highlighted below. The corresponding “Home” screen is shown below that, so there are around 14 or so InfoSpaces that should be available.
2. Yesterday, there was a production deployment that contained some changes to the underlying views in the form of label changes (not column name changes).
3. Now, in the “Manage” screen we cannot see these same 14 InfoSpaces available under the expected connection. Instead, they are all available under the “Source Unavailable” node with the default action of “Change Source” shown.
Additionally, we are seeing some strange behavior where certain facets are actually containing the wrong data. For example, in a facet/column called “Source Type”, where the expected values are “NBP or PBP”, we are seeing Material numbers like “00001112453”. This leads me to believe that there is a mapping issue under the covers.
Thanks,
Justin

Our BOE Explorer is Version: 14.1.1 Build: 1072 - I’m not sure how this corresponds with your 69.01 to 74 numbers (release note numbers?).
But it sounds identical to your description.
One of our observations: if we change the sorting on a facet pane using the upper right sort control the values are corrected for a while, at least until we change a measure and the set of facets get updated with the miss-mapped values again. This only occurs on some models and we haven’t been able to determine what the underlying criteria might be that aggravates the problem.
Thanks for your input – it helps us determine a viable path forward.
Cheers,
Tony

[svn] 1435: Delete fles-sdk-description. xml altogether as it is causing issues when syncing to the sdk.

Revision: 1435
Author: [email protected]
Date: 2008-04-28 13:39:06 -0700 (Mon, 28 Apr 2008)
Log Message:
Delete fles-sdk-description.xml altogether as it is causing issues when syncing to the sdk. Because it gets updated every time you build it also gets marked by svn as being out of sync and that is a pain too so... I opted to just create it on the fly and then update it and not have it checked in
Modified Paths:
flex/sdk/trunk/build.xml
Removed Paths:
flex/sdk/trunk/flex-sdk-description.xml

>>D:\GoldSun\Source Code\Flash\ExtentionTest\lib\Build>D:\SDKs\flex_sdk_4.5.1.21328\bin\adl -package -target ane DaveExtension.ane extension.xml -swc DaveExtension.swc -platform iPhone-ARM library.swf libDaveExtention.a
Either its a typo or by mistake you wrote adl in yout bat file. Change it to adt since that is the file that will package your ane. adl is just used for debugging/running on Desktop.
Hope this helps. let me know how it goes.
Thanks,
Meet

IOS 7 Safari (as well as OSX 10.9) Credit Card prompt "not now" causing issues

Experiencing the same problem as this thread from stack overflow. safari on iphone/ipad http://stackoverflow.com/questions/21769058/ios-7-safari-as-well-as-osx-10-9-cre dit-card-prompt-not-now-causing-issues
Safari on ios7 devices stops my form from submitting when it prompts to remember card.
there must be a workaround other than pulling a pw field off the page???

You can condense it down to a couple of options, shadowbeast, if you have a computer that is regularly maintained, not over-full, doesn't have much in the way of third party haxies installed, has had its directories checked recently, don't try to install the update while simultaneously running other software, etc etc. Trouble is in many cases such parameters aren't met!
Using an update situation as an opportunity to undertake the general maintenance that should be done every month or so on any computer , (even if it is a Mac!) helps to forestall many other problems, too, as well as helping to ensure that the update process goes smoothly.
I agree that the "Combo" update can be a good idea, sig, and I've usually done so in the past myself. In some circumstances it can certainly help to overcome problems that have arisen along the way. These days, however, the updates themselves tend to be very large (in this case the "combo" version is over 800 MB in size) and I'm very aware that many , many people use the smaller Software Update versions. These seem to be less problematic than they used to be in the past, though if anything is problematic after the installation downloading the Combo and re-installing it over the top of the SU version is a very good idea.
I've been trying the SU updates regularly myself since SL arrived on the scene, and all have gone smoothly. Mind you, this has been on a couple of pretty well maintained machines.
Cheers
Rod

Sync To CRM Time - Does This Cause Issues For Anyone Else?

I have been a long-time Eloqua user. Primarily, the companies that I have worked are B-to-B and serve small businesses. In the small business lead generation world, when you wait to respond to leads - you lose. The first one in usually gets the deal. We have all of our lead generation activities running through Eloqua, including our PPL campaigns where multiple competitors are also responding to RFQ's and also our inbound sales call center uses it (via form) to submit leads in order to take advantage of the de-duplication and validation power in Eloqua. The latter causes my sales team to wait 15 minutes while they are they are waiting for the lead to get created and transferred to them in CRM.
Here is my issue. At best, it takes Eloqua 15 minutes to sync the leads to SFDC. These programs are "straight to queue" integrations too. I am running integration events straight from the form processing steps, so there are no program builder delays here. The guys in Support have been really great, and have been working with me to see what can be done to decrease the lag time, but 15 minutes seems to be the acceptable rate. So, I am starting to think of ways to take them directly to SFDC and just live with the issues of duplicates and no validation.
I can't be the only one that this causes issues for. Does anyone else have this issue?

Hi John,
I too have had these issues. The main problem is not program builder. The integration queue/engine is prone to backlogs. Rumor has it that the integration engine is shared by the campaign engine and a bunch of other services in the platform. Either way, the integration queue will always have a lag.
My solution was:
1. Push data from ELQ form to a SFDC Web-toLead Form IF ELQ contact has blank LeadID and ContactID (does not exist in SFDC) -- this creates leads instantly in SFDC.
2. Run an apex trigger from SFDC to do a blind form submit to Eloqua with the email address and SFDC Lead ID for the leads created from step1 -- this will ensure that creating duplicate leads in SFDC is minimized.
3. Send notifications from ELQ form to Sales Reps if ELQ contact already exists in SFDC as Lead or Contact. -- even without the updates on the lead or contact records in sfdc, this gives the reps an immediate heads up.
4. Send the rest of the information that I couldn't fit into the post-data-to-server step for the new lead.
Of course I also baked into the form processing steps a bunch of conditions to mitigate spam.

Just updated to IOS 7 and two issues: First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services".

Just updated to IOS 7 and two issues:
First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services". I'm not sure what this really means...
The second issue is when I try to select "Manually Manage Music"
The iPhone "My iPhone" is synced with another iTunes libary on "MY-PC". Do you want to erase this iPhone and sync with this iTunes library? An iPhone can be synced with only one iTunes library at a time. Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
So... I don't want to do that, but I do what to be able to Manage my music. I'm not sure what it means by being synced to another iTunes unless it means to an older version of itunes?
Anyone have any ideas?

I cannot address the sync services error right now, but the error that you receive when you change from sync to manually manage music is what happens when you change. Once you change to manually manage music, it erases all of the music and will only put the music that you want on the phone, content that you manually drag over to it. See if this support document helps you out. http://support.apple.com/kb/HT1535

I am using Windows 7 Home Premium 64-bit OS. I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installa

I am using Windows 7 Home Premium 64-bit OS.I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installation process it gave me an error message that said:
Runtime error!
Program C:\Program Files\iTunes.exe
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I quit the installation, uninstalled iTunes and rebooted my computer. I now receive a similar message with a slight difference:
Runtime error!
Program C:\Program Files (x86)...
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I did not leave anything out from the error message. It doesn't point to a specific file, it just ends with "(x86)..." Every time I boot up my computer, this error message pops up on my desktop.
How do I repair this issue? I have found multiple suggested solutions but am unsure which one is the best, and I don't want to try a bunch of different things for fear I may make the problem worse. I would like to try and fix this myself if possible but I need to know if that is really possible or if I need to take my computer to someone for repairs. Any suggestions will be greatly appreciated!!

Hi lustyln,
I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
For reference, here are your product specifications:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
To get your PC software back to how it was when it was first purchased, run a system recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
I hope this helps.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

New software update still not downloading. Apps updates have all downloaded since iTunes issue resolved. Is the software issue also related to this, or is there another problem? This is on my iPhone 6, not my Mac.

Trying to download the iOS 8.2 software update on my iPhone 6, but it won't update. All app updates have resolved since the iTunes issue was resolved. Is the software update issue related to this as well, or is it another problem entirely?
I've synced it to iTunes, turned it off/on, etc., but still not downloading.
Any help is appreciated.
Thanks.

Hi DebC64,
So is the iOS 8.2 update not downloading to your iPhone, computer or both?
You have synced it to iTunes, that is an option to update if it's not updating wirelessly. Please see if other steps help.
Resolve iOS update and restore errors in iTunes - Apple Support
Regards,
Nubz

Can too large a folder cause issues and effect performace of my Mac Pro

Hi, I have a 180 gb folder filled with important data within my Home folder. This folder has a many subfolders as well. The folder is on my startup drive and where I have Snow Leopard installed. Can too large a folder cause issues with my mac and effect performance? Thanks

another way to ask, would you make better use of, and improve I/O and performance, if you used your other drive bays? yes.
Boot drives with even less than 50% free is probably not a good idea. All depends on whether 200GB is on 1TB or on 500GB drive. And how fragmented free space even.
Lifting, loading and writing or copying 4GB files of course does have an impact, so if you work with 2GB files in CS5....
Having a dedicated type boot drive, media drive (and isolate media and library files) as well as scratch drive is normally done with Mac Pro.
The biggest bang in performance: lean mean SSD boot drive.

MovieClip Filter Causing issues with EventListeners (mouseEvent.ROLL_OVER)

Hello,
I have been working on a flash photo gallery for the web. It loads thumbnails from an xml file into a loader which is then made the child of a movieclip.
The thumbnails are animated and triggered with mouse events of ROLL_OVER and ROLL_OFF. I have this working, or appearing to, when the movieclip containing the loaded thumbnail has no filters applied to it.
I want add a drop shadow on the ROLL_OVER event and remove the drop shadow on the ROLL_OFF event. I also have this working, however my problem arises when I mouse over the very edge of the movieclip. This cauese the ROLL_OVER and ROLL_OFF function to fire in rapid succession, creating a flashing dropshadow. This looks aweful and I really have no idea what would be causing this issue.
Thanks in advance for any advice!
Regards.

Thanks for the reply.
I also found it difficult to believe that the filter was causing issues with the roll over/out events. I will expand on the example code you provided so you get an idea of what I am trying to accomplish and where my issues arise.
EDIT: I should add that the issue is only present when I tween AND add a filter. If I only add a filter or if I only tween I have no issues but the combination or adding a filter and tweening causes the OVER/OUT events to fire rapidly.
//This code does not result in a flashing animation
myClip.addEventListener(MouseEvent.ROLL_OVER, overClip);
myClip.addEventListener(MouseEvent.ROLL_OUT, outClip);
function overClip(e:MouseEvent):void
   myTween = new Tween(myClip, "scaleX", Regular.easeOut, myClip.scaleX, 1.5 , 3, true);
   myTween = new Tween(myClip, "scaleY", Regular.easeOut, myClip.scaleY, 1.5 , 3, true);
function outClip(e:MouseEvent):void
   myTween = new Tween(myClip, "scaleX", Regular.easeOut, myClip.scaleX, 1 , 3, true);
   myTween = new Tween(myClip, "scaleY", Regular.easeOut, myClip.scaleY, 1 , 3, true);
//However if i add these lines of code to add and remove a filter I can observe the flashing effect when the mouse is near the edge of the moveclip
myClip.addEventListener(MouseEvent.ROLL_OVER, overClip);
myClip.addEventListener(MouseEvent.ROLL_OUT, outClip);
function overClip(e:MouseEvent):void
   myClip.filters = [myDropShadowFilter];
   myTween = new Tween(myClip, "scaleX", Regular.easeOut, myClip.scaleX, 1.5 , 3, true);
   myTween = new Tween(myClip, "scaleY", Regular.easeOut, myClip.scaleY, 1.5 , 3, true);
function outClip(e:MouseEvent):void
   myClip.filters = [];
   myTween = new Tween(myClip, "scaleX", Regular.easeOut, myClip.scaleX, 1 , 3, true);
   myTween = new Tween(myClip, "scaleY", Regular.easeOut, myClip.scaleY, 1 , 3, true);
Is there something obviously wrong with this approach to adding a filter/tweening? I am fairly new to flash.
Thanks again!
Message was edited by: Dafunkz

MDP to HDMI adapter causing issues while connecting Macbook air late 2013 edition to Projector. Projector shows grains on the display.

MDP to HDMI adapter causing issues while connecting Macbook air late 2013 edition to Projector. Projector shows grains on the display.

Sounds like you may have been in extended display mode. If so, all you had to do was drag a window to the projector display. Or, if you wanted mirrored mode, in display preferences select check mirror display.

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Does the 10.5.7 update address command+f finder search issues?

Does the 10.5.7 update address command+f finder search issues?
Search has been horrible under 10.5 in that it does not reliably find FOLDERS on network drives, only file names.
Even when I am looking directly at a folder and I search for it will not appear in the command+f window.
Also the stupidity of not allowing a specific search location.
Has this been addressed? I have, at any given time, 3-4 mounted servers.
I do not have a choice now to search a specific hard drive.
10.4.11 gave me the option under "OTHERS" to select a specific place to search.
The only choice I have in 10.5.2 is "SHARED". Which searches all drives when I only want to search one. Nor do I have a choice of searching just one of my two internal drives.
I talked with Chris in apple engineering several months ago, who acknowledged that search problems are a known issue under 10.5 and this was being addressed but have not heard any more. I don't want to download an update unless these broken search issues have been fixed. This is a production machine and I cannot have downtime in the Dept.

Have you filed a bug report or enhancement request with Apple?
http://bugreport.apple.com/

Update to 10.6.7 caused issues

Similar Messages

Maybe you are looking for