Update to 10.7 did not work, cannot access iTunes. Need AVFoundationCF.dll, Ituneshelper not installed correctly, Error 7 (Windows Error 126), Error 7 (Windows Error 5)

I am running Windows 7 64 bit.
This HORROR  began because I realized that my phone had suddenly lost all of the music except music that had been purchased. It also lost all purchased iBooks as well as audible books downloaded from audible and ringtones that I had purchased from iTunes.
I then thought that it would be fine once I connected to itunes on my computer. I connected to itunes and it said that there was an update available so I downloaded and installed 10.7.
I tried to run the program and got Error 7 (Windows error 5) message.
I then found several discussion questions that seemed similar to mine and I think that I tried them all. Removed everything apple and reinstalled iTunes. I followed the instructions and removed everything in the order that was listed, some I had to change security to own the file before I could delete them. I did all of the steps, (maybe I deleted too many apples items ??) emptied the recycling bin, restarted and reinstalled.  I also tried the Net framework fix, used the ms fixit (the one with the picture of the man on it) and I think a few other things that I have found on this site as well as MS site. I restarted my computer every time.
The latest thing that I tried was to download 10.63 since I don't care about the new stuff.  After all of this I sometimes get and message saying that I am missing AVFoundationCF.dll file and once it said something about Itunes Helper (when these two messages appear, it is separate from the error messages which occur after clicking ok on them)  before getting the Error 7 (windows error 5) or else Error 7 (Windows error 126).
PLEASE HELP!

Follow the instructions on this link, basically un-install everything, remove programs that says they are made by apple inc. (using add remove program)
http://www.reimageplus.com/fix-windows-127-error/   (Many thanks to reimageplus.com)
You will also need to check and verify that the following folders have been removed:
C:\Program Files\Bonjour
C:\Program Files\Common Files\Apple
C:\Program Files\iTunes
C:\Program Files\iPod
C:\Program Files\QuickTime
C:\Windows\System32\QuickTime
C:\Windows\System32\QuickTimeVR
dont forget to remove icloud also
you dont need to delete your itune music library though
If any of these folders still exist, delete them along with their contents. (if you cant delete them, right click and go to properties and then security and change the control of the fold to you)
do this for files under  program files and program file (x86) on your computer
once you have deleted everything, restart your computer. Then I repaired my registry using a registry repair program.
Important:-  instead of installing itunes I installed quick time, which installs apple application support (this is the corrupt file which is causing all the issues)
i then installed itunes and it all worked fine,
should take no longer than half hour to fix
hope this helps

Similar Messages

  • 9.0.3 Update did not work, cannot open iTunes

    I updated to the newest version of iTunes (9.0.3) earlier. Now, when I click on the iTunes applications a troubleshooting box comes up that says "This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes" It will not open! Ugh. So I downloaded it AGAIN and it won't finish, it just says there was a problem please reinstall. So I need help. Re-downloading it isn't an option, is anyone else having this happen to them? I can't figure out how to contact REAL support either.

    Follow the instructions on this link, basically un-install everything, remove programs that says they are made by apple inc. (using add remove program)
    http://www.reimageplus.com/fix-windows-127-error/   (Many thanks to reimageplus.com)
    You will also need to check and verify that the following folders have been removed:
    C:\Program Files\Bonjour
    C:\Program Files\Common Files\Apple
    C:\Program Files\iTunes
    C:\Program Files\iPod
    C:\Program Files\QuickTime
    C:\Windows\System32\QuickTime
    C:\Windows\System32\QuickTimeVR
    dont forget to remove icloud also
    you dont need to delete your itune music library though
    If any of these folders still exist, delete them along with their contents. (if you cant delete them, right click and go to properties and then security and change the control of the fold to you)
    do this for files under  program files and program file (x86) on your computer
    once you have deleted everything, restart your computer. Then I repaired my registry using a registry repair program.
    Important:-  instead of installing itunes I installed quick time, which installs apple application support (this is the corrupt file which is causing all the issues)
    i then installed itunes and it all worked fine,
    should take no longer than half hour to fix
    hope this helps

  • Photos is not working. cannot access my pics!

    Just got the new "upgrade" to 10.10.3 and the new Photos is shutting down every time it opens. I cannot access my old iPhoto pics. Anyone else? This is like having Windows, not Apple...

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • HT204074 Cannot access iTunes from iPad any longer? Not sure what happened?

    Cannot access iTunes from iPad...not sure what happen. Used to work fine

    You are right- they got to let us know that status or something. Here I am already to sit down and relax with a nice episode of Dexter and cannot access anything. it was fine this morning and now its annoying.

  • HT2729 I bought my iPad in America. Now living in Germany and cannot access iTunes???

    I bought my iPad in America. Now living in Germany and cannot access iTunes???

    Why not?
    What have you tried?
    What happens?
    Any info about your issue?

  • TS1717 Started a software update this morning which didn't work.  Now Itunes will not open at all.  I get the following message."The program can't state becasue MSVCR80.dll is missing from your computer."

    Started a Itunes software update this morning which didn't work.  Now Itunes will not open at all.  I get the following message."The program can't state becasue MSVCR80.dll is missing from your computer."

    There are a couple of options that I know of to fix the issue.
    One is listed in this thread - https://discussions.apple.com/message/24606478#24606478 - and involves uninstalling iTunes and related components and then re-installing iTunes.  You will need to read the instructions in the thread to see the correct uninstall order.
    Second option is use System Restore to set your system back to a date prior to the iTunes update.  I did this before finding the thread mentioned above.
    Not sure exactly what the problem is but I know, after a search, that MSVCR80.dll was indeed already installed on my computer. 
    Message was edited by: karivers

  • I cannot access iTunes on my desktop.  Works fine on my laptop.  Message says "The iTunes Library .itl is locked, on a locked disk, or you do not have write permission."  The disk is not locked.

    I cannot access iTunes from my deskyop.  Worked great until a couple of days ago, then I now get the message that "The iTunes Library .itl is locked, on a locked disk, or you do not have write permission for this file."  I have not turned on any parental controls on the desktop.  I have reloaded iTunes several times.  No luck.  I've run virus scans several times.  No luck.  I've restarted & tuned off the computer several times.  No luck.  I've uninstalled iTunes then reinstalled several times.  No luck.  Any thoughts?

    To solve this issue all I did was check to ensure that the file permissions were set as described by the earlier posts, followed by simply deleting the iTunes Library Genius.itdb file.  Once the file was deleted I was able to open iTunes without difficulty.  Note that I am running Windows 8.  Hope this helps!

  • 7.1.2 update failed. Now my iPhone 5 is in recovery mode and hard resetting does not work for me. iTunes also will not detect my phone now

    I did my 7.1.2 update via iTunes. Half way through it stopped working saying it does not detect my phone. Now my iPhone 5 is in recovery mode and hard resetting does not work for me. iTunes also will not detect my phone now

    Thank you SO very much for posting this. I had the exact issue with my iPad Mini after the same upgrade. Hard reset failed, computer would not recognize iPad. I had read all the other instructions and nothing worked.... YOUR SOLUTION WORKED FOR ME - with a slight variation.
    I followed your lead and connected my iPad Mini to another computer, fired up iTunes, it saw the iPad Mini in Restore Mode and allowed me to go into Restore (yes, it wiped all of the data but I have a back up on the other computer that would not see it after the failed update). It installed the latest iOS 7.1.2 as well. I then disconnected it from that computer, reconnected it to the computer that would not see it prior and it then saw it as a new iPad and allowed me to Restore my backup and now it's all good!
    I detailed my steps only because you downloaded the previous version - 7.1.1 whereas I downloaded the latest version (7.1.2) and then restored my back up.

  • After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.

    After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ

    Izit software or hardware? Confuse:(
    Only can use wifi now.
    Any way thanks guys for ur suggestion:) amishcake and simes

  • HT4623 I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

    I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

    I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

  • My adobe is not working cannot open pdf i am going to deleted it

    my adobe is not working cannot open pdf
    i am going to delted it
    typing is not for me phone call is bettr

    Dog so that your inquiry can be directed to the correct forum.  What Adobe software or service are you referring too?  Please see Ned's post for information on how to contact our support team directly.

  • Ever since I installed the update of Leopard 10.5.2 I cannot open itunes!!

    Ever since I installed the update of Leopard 10.5.2 I cannot open itunes!!
    I get a message that says:"The itunes library is locked, on a locked disk, or you do not have write permission for this file."
    I did do a permissions fix with the disk utility and same problem!
    Any suggestions???
    I think I might be demanding my money back for this Leopard!

    Below where you see the Read and Write permissions on that folder there is a little triangle next to the word Details. Scroll down a bit and you'll see a tab to click to Apply to Enclosed Items. If it says you have read and write on the main folder, click the Apply button to make sure that all folders inside the main folder also have both Read and Write permission.

  • I have recently upgraded from my iphone 5 to a new phone. My iphone 5 's touch screen does not work anymore. I need to backup my phone, but I can't do it on itunes without my password. Everything besides screen is ok. Is there a way around it? :(

    I have recently upgraded from my iphone 5 to a new phone. My iphone 5 's touch screen does not work anymore. I need to backup my phone, but I can't do it on itunes without my password. Everything besides the screen is completely fine-the screen will not recognize my finger anymore. I am not trying to fix the phone, but I need to have my contacts. The pictures have already synced, but I need my password to do a full backup. Unfortunately, I can't type in my password. Is there any way around it? If I take my phone to the apple store, will they be able to help me? I am not willing to replace the screen just to do this, however, so that is out of the question. 

    Someone else may have a workaround, but, as far as I know, if you cannot interact with the screen on the iPhone, there is no way to unlock it so you can get to your contacts.
    Were you saving them to iCloud by chance? If so, you can restore them to your new phone.
    ~Lyssa

  • Opening my Photoshop Elements 11 does not work. I always get following message: "Could not open a volume of work, because the file is locked or you do not have the required permissions. Undo the protection of the file on using the command 'Properties' in

    Opening my Photoshop Elements 11 does not work. I always get following message: "Could not open a volume of work, because the file is locked or you do not have the required permissions. Undo the protection of the file on using the command 'Properties' in Windows Explorer." What is wrong? I cannot unterstand what I have to do!

    Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
    Mylenium

  • Just upgraded IOS to V7 and iphone is asking for a password and the online password will not work. I really need to get this sorted as I am away and need to get the phone working.

    Just upgraded IOS to V7 and iphone is asking for a password and the online password will not work. I really need to get this sorted as I am away and need to get the phone working.

    Pablos1966 wrote:
    Surely the current ID and Password would work . Anyway I will see how I get on with the Device Password.
    No. If you failed to turn off Find my iPhone BEFORE you upgraded to iOS 7, you will need the original Apple ID and password. If you upgraded to iOS 7 you will need this info; there is no way around this. If it is the device passcode you will need to restore your iPhone in order to reset that, which in the end will require your Apple ID and password in order to activate the phone once it is restored.
    Why don't you have the original Apple ID? Where did you get the phone?

Maybe you are looking for

  • I just updated itunes and now it will not recognize that my iphone is even pluged in! What do I do??

    I just downloaded the new itunes and now it wont recognize my iphone! I really need to update it! is there a way to make it show up?

  • Can't create computer account in Workgroup Manager

    Hi everybody !. I am installing a new Xserve with Mac OS X Server 10.5.6 and I am having some trouble with computer accounts in Workgroup Manager. I have a couple of PCs with Windows XP that I have added to the Windows domain created by Mac OS X Serv

  • RFC Port

    Is it necessary to create RFC port when I am sending IDOCS to XI? If no then under what circumstances do we need to create a RFC port. Why do we need to create the distribution model through SALE transaction.

  • How to increase the system progress bar height?

    Hi I just want to increase the height of windows system progress bar and it is not able to customize. It is having the option to adjust the width and not the height. For example the height of system progress bar used in labview installer is large com

  • BootCamp Problem - WIN7 Setup

    Hi all, i want to install Windows 7 64bit on my new MacBook Pro i7 and i used BootCamp. BootCamp make succesfully a Driver-USB-Stick and i have a original Win7-64bit-Ultimate-DVD SP2. Windows 7 Setups boots and its ok, then set language and contiune.