Update to 2.1 error and coma

Hello. I've just bought an iPod Touch 1Gen here in Brazil, and it cames with 1.1.5 firmware version. When I connect it to iTunes 8.01, I got the message that 2.1 version of the firmware is available. I bought it from iTunes Store and now it's on my computer (iPod1,12.1_5F137Restore.ipsw).
The problem is: it's not updating. After hit the "update" button, I get the message "Extracting contents" thing, after that the Apple log appears on the iPod screen (with no "processing" logo on the botton) and 4 seconds later I got the "cable pointing to iTunes logo" image on iPod screen - I think this is the "coma" image. After hours reading and searching, I tried iPod1,11.1.1_3A110aRestore.ipsw, iPod1,11.1.5_4B1Restore.ipsw, iPod1,12.0_5A347Restore.ipsw, iPod1,12.1_5F137Restore.ipsw and iPod 2.0.1 Restore.ipsw with all possible combinations. The only one that works is the 1.1.5, that I'm guessing that came with the iPod. Also is the one that I get the "processing" logo on the bottom of my iPod is the 1.1.5.
I'm doing this only to get apps to the iPod, and I don't want to jailbreak it.
Does anybody can help me?

One thing you can try is deleting the iPod touch 2.1 software file and then having iTunes download a new copy of it. If you act as though you're purchasing the upgrade a second time, iTunes will recognize you and ask if you'd like to dowload again for free. Perhaps there's an issue with that upgrade file that's preventing it from being installed onto the iPod.
CG

Similar Messages

  • TS3694 I was updating the latest software i.e iOS 6 on 3gs and battery got finished and now I cant turn my phone on and when I update it with itunes error 3194 comes up

    I was updating the latest software i.e iOS 6 on 3gs and battery got finished and now I cant turn my phone on and when I update it with itunes error 3194 comes up

    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • I tried to download the latest itunes update, but received an error and now can't open itunes at all. Help?

    i tried to download the latest itunes update, but received an error and now can't open itunes at all. Help?

    Hello bajura007,
    Thank you for the details of the issue you are experiencing with installing the latest iTunes update.  I recommend following the steps below:
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
    You can find the full article here:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Every time i try to download updates i get an error and told to restart my macbook pro. why? what to do?

    every time i try to download updates i get an error and told to restart my macbook pro. why? what to do?

    This is a rare error, so excuse me if I ask some basic questions:
    1. Do you update your Apple software through the Software Update pulldown menu? If not, I'd suggest doing that.
    2. Do you perform diagnostics? If not, you can perform a Permissions check by going to Applications/Utilities/Disk Utility and running it.
    3. Do you perform other diagnostics? Download Onyx to your Mac, and perform a full diagnostic on your machine. You'll need to reboot.
    4. Have you tried to download updates individually from Apple? Not the perfect solution, but there's a good chance it will work.
    5. Have you used Terminal? If you go to Applications/Utilities/Terminal, type "sudo softwareupdate --install --all", and enter. Software Update should work.
    6. If all fails, consult help at your Apple Store, if there's one nearby.

  • New update gave me an error and is making me restore itunes and it just freezes at the same place everytime

    new apple update gave me an error yesterday and is making me restore itunes and it just freezes up at the same place everytime.  I have checked for new updates on itunes and am running 11.1.2, restarted my computer 3 times and rebooted my iphone like 5 times and nothing new is happening.

    You may need to put the iPad in recovery mode to restore it.
    http://support.apple.com/kb/HT1808

  • Phone stuck in recovery mode complete black screen will not turn on after recovery and update there was an error and now computer and itunes will not recognize the phone....Anyone know what I can do to get the phone recognized again when it cant be turned

    Phone was not updated on time so it automatically shuts off and you get a plain black screen until it is recovered and updated. Well when i did the update and recovery I received an error. I went through the steps to fix the error, I had to restart my computer and now the phone isnt recognized on my computer or in itunes. The screen is still completely black so pushing the home button and plugging in to computer still does nothing. Device manager shows nothing in usb port, and apple mobile device software is installed and running. Any help?

    Hello agardner37701,
    I found some steps you can take when your iPhone is not recognized by iTunes when in Recovery Mode.  I recommend reviewing the steps in the section titled "If the device is not recognized while in Recovery Mode" under step 5 in the following article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • TS1368 I tried to update the software for the latest update on my iPhone 4 today. It removed the software and then when it went to reload the update, it showed an error and I have a useless iPhone. I went to "Restore" it. 4 Hours later, still waiting. Ide

    I tried to update to the latest software for the iPhone 4 today, May 16th. After removing the software, I received an error message from iTunes and now my phone has no software and useless for everything including a phone call. I immediately went to Restore it to my last saved version and 4 hours later, I still have "iTunes is restoring the software on this iPhone. I am frustrated beyond belief as this happend twice when I had a 3G. Does anyone know how long it should take for a Restore on an iPhone 4 16 gb? Or if there is a fix for this? I'm about to throw away the phone and give up on iPhones forever. Thanks for any help you can give.

    Hi NWL1,
    Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • I was updating my iPhone 4 to iOS 7 and while updating there was an error and the only way toturn it back on is restoring it. is that the only way?

    I was updating my iPhone 4 to iOS 7 today and before I did, I backed my phone up into iCloud. Then while it was updating an error occured and now itunes is telling me the only way to power up my phone is to restore the whole device. Is it possible to power up my phone without restoring the whole device? Or without loosing everything?

    Not if the error says to restore in iTunes. You should have made a backup before the update, so you should be able to restore to that backup. But with the device in recovery mode as it is, there is no way to backup anything at this time. If you did not make a backup before updating then you can only restore to your latest backup, whenever that was. If no backup at all, then you will have to restore the device as new, losing everything.

  • Can not install the newest update to itunes gets error and backs off. also can not remove itunes to try to reload

    I am unable to update itunes on my pc. I also can not remove to try for new load. Help please

    Try the following steps:
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
    3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

  • HT4623 While update there is an error and my iPhone stop, how to restart

    Please help to restart my iphone4

    Perform a hard reset on your iPhone (press the Home button and the Sleep to screen off)
    Connect the USB cable to your iPhone and launch iTunes
    It's time to position your iPhone into DFU mode (Device Firmware Update) how: Press the Home button and the Sleep for 10 seconds (remember 10 seconds!), After ten seconds, release the sleep button and press and hold the Home button for 10 seconds (if you do it all correctly and the time is right) then it will display a message from iTunes like this.
    If you do not get a message like that, repeat step 3, until you get a message like the above on your iTunes.
    After step 3 successfully, iTunes will start restoring your iPhone firmware to its default alias originis firmware
    After the restore process is complete, your iPhone will reboots and if your iPhone is connected to iTunes, so flame, iTunes will offer the iPhone restore from backup that you created (which will restore the contacts, music, video, photo, and application), if you previously never backed up your iPhone, you should select this option.
    The process of backing up restore your iPhone will take approximately 2 to 3 hours, so you should be patient.
    Once completed, iTunes will inform you and your iPhone will reboot again
    The next process, sync your iPhone your iTunes, if the iPhone has been running with the normal synchronization process would not be a problem.
    Congratulations, your iPhone is running normally again.

  • While installing latest update I lost ability to open Itunes.  Getting "runtime error" and then next box says error 1114.  Tried uninstalling and reinstalling and does not work.  Getting same error.  Very frustrating.

    Cannot open Itunes after trying to install latest update.  Getting runtime error and then error 1114.  Tried uninstalling and reinstalling and still getting same error.  How do I fix this.  Very frustrating!

    Hi there,
    Earlier iTunes (and supporting applications) need to be completely uninstalled before you can install the new version. Here's the complete Apple info on this: http://support.apple.com/kb/HT1923
    Mobile device application will most likely fail to uninstall, so you would need to visit its location(s) and manually delete the files then folder(s). The location of the folders is documented in this link from Apple.
    It's a pain, but it should work.

  • Trying to install the new update and it kept saying runtime error and now my itunes has dissapeared from my computer.  All my music is gone!How do i get it back?

    trying to do the new update. it said runtime error``     and now my itunes is empty on my computer,  where/how do I get my music and playlists back?

    See Empty/corrupt library after upgrade/crash.
    tt2

  • I try to update my itunes but appear an error and now I can open my itunes, I try to update my itunes but appear an error and now I can open my itunes

    Yesterday when I opened my Itunes I have an update. I try to update but appera an error and now I can open my itunes

    Error 7 (windows eeror 126)
    Many thanks.
    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Bios not install error and Raid Configuration not showing physcial HDD in Lenovo

    Is this a SATA hard drive by any chance?  Sounds like you have an Adaptec SCSI controller, but no hard drive attached to it.  Are you booting an install DVD of some sort?

    Bios not install error and Raid Configuration not showing physcial HDD in Lenovo RD 120 Server (New)
    updated bios still same error
    and at array configuration it is not showing any hard disk
    hard disk utility it is showing hard disk 
    we are trying to install OS with single hard disk in Lenovo RD 120 Server
    This topic first appeared in the Spiceworks Community

  • Hi i have just tried to update i tunes and it has crashed and uninstalled i tunes off my laptop. I have tried to install i tunes again but it wont and comes up with error messages

    Hi i have just tried to update i tunes and it has crashed and uninstalled i tunes off my laptop. I have tried to install i tunes again but it wont and comes up with error messages

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2
    Message was edited by: turingtest2

Maybe you are looking for