Update to 7.3.1 reverts back to ver 7.0.  Help?

I am trying to upgrade my AE to 7.3.1. I can update to 7.2.1 and it seems to work. I tried powering down for > 30 seconds and then booting into 7.2.1. When the 7.3.1 update is applied and the AE is rebooted, the new firmware version shows 7.0. This makes no sense to me.
I have tried updating the AE through a wireless and wired connection. I also tried powering the AE off for >30 seconds after the update. The AE does seem to take a little while to reboot after the update to 7.3.1, which does not take.
I am running 5.3.1 of the airport utility.
Any ideas.

Bought a new computer . . .

Similar Messages

  • I updated to iTunes 11 on my Windows PC. Since the update, when I open iTunes its window is too large for my screen. Resizing is a pain, because I have to change my screen resolution. And when I restart iTunes,it has reverted back to being too large.Help!

    I recently updated to iTunes 11 on my Windows PC. Since the update, each time I open iTunes its window is too large for my screen. Resizing it is a pain, because I have to change my screen resolution. And then when I restart iTunes, it has reverted back to being too large. Please help!

    Having the same issue here....a quick fix is to just minimize the window, and immediately maximize it.  It will now fit the screen.  Trouble is, after you close it, you'll have to do it again when you re-start itunes.  The good news is it takes all of about 2 seconds.  Apple should fix this.  Should.

  • Since the iOS 8.3 update my iPad keeps asking for my old iTunes password(the account I don't use and can't reset as the e-mail address was hacked) As a result I can't update my apps because it reverts back to asking for my old iTunes password.

    Since 8.3 iOS update my iPad keeps asking my old iTunes password for an account I've disabled as my e-mail got hacked. As a result I can't update any of my apps ( I'm missing out on hay day) 

    Any content is tied to the account that you used to buy/download it - so if you created a new account as opposed to updating the existing one, then you will need to use the old account to download updates to its apps. Can you not update your old account so as to have a new email address on it (e.g. via this page) ?

  • On iMac running OS 10.6.7, tried ver 4 3x's and each time had to revert back to older version since can't import bookmarks, etc. Now I can't revert back to older version! Help!

    Using iMac running OS 10.6.7. I've tried Beta ver 4 before (2x's) and each time I had to revert to older version since I was unable to import all my bookmarks, etc. after following all the right steps. I have them saved as HTML and json files. Neither works in ver 4 now. I am stuck. I've Googled fixes, but now need your help to resolve this incessant problem.

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    * http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    Make sure that you not run Firefox in permanent [[Private Browsing]] mode.
    * You enter Private Browsing mode if you select: Firefox > Preferences > Privacy > History: Firefox will: "Never Remember History"
    * To see all History and Cookie settings, choose: Firefox > Preferences > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    * Uncheck: [ ] "Permanent Private Browsing mode"

  • I have tried to fix the diabled apple id issue... reset pw, updated all ios, logged out and back in.... help

    I need to reset my apple id - i have followed all of the directions and spent 2 hours ... what now? Google?

    The best course of action at this point is to contact iTunes Support. You can do so at http://apple.com/support/itunes/contact/

  • I updated to new ios and now it is not syncing properly.  How can i revert back to the previous installed version?

    I updated to new ios and now it is not syncing properly.  New songs are not showing up on the ipod display but when I view the device on my computer, they are in the playlist but there is a dashed circle beside the missing songs.  It previously synced perfectly before the IOS update.  How can i revert back to the previous installed version?

    Downgrading the iOS is not supported by Apple.
    Try:
    Re: What does the gray dotted circle in iTunes mean?
    https://discussions.apple.com/thread/4676111?tstart=0\\
    Dotted circles next to songs, won't sync, red circle with square?

  • Office 2013 contacts reverting back to old entries

    Windows 7, Outlook 2013
    I am logged into Outlook but updating my boss's contacts, which I have access to (his mail, contacts, calendar, etc.) which is a separate email/login from mine. I am trying to do a mass update of his contacts. When I enter new information into previously
    blank fields and save, sometimes it saves and sometimes it doesn't. I keep re-copying and saving until it all saves.
    Then today I come in, and all the updates I did yesterday are not there, the entries have reverted back to an old entry, hence fields like address which had an address are now blank.
    We have 5 computers and 3 cell phones hooked up to my boss's outlook/contacts account.
    Our IT co's response was they've never heard of this problem and will have to do trial and error.
    My computer (and phone) have been newly added to my boss's contacts/outlook login as of 2 weeks ago, and there was never a problem with the other 4 computers and 2 phones before me. However for the past 2 weeks, Outlook has been doing
    things like this, with both Contacts and Calendars (however Calendar seems to be stable now.)
    I asked IT if possibly one of the devices was set as a master, so that when I update my computer, it's reverting back to the master entry, but IT's response was Exchange doesn't work like that. I unfortunately know very little about Exchange or networking.
    I just
    unchecked “Check for duplicates when saving new contacts” under Options/People, due to an article on Outlook 2010, but unsure if that has fixed the problem.
    Does anyone have any recommendations as to how to fix this? Thank you.

    This is not normal behavior. When you sync with exchange there isn't a master, it uses the last update date to determine which is correct. It also creates 'conflict' copies if it's not sure which one is correct. It doesn't sound like its creating conflict
    copies though.
    What cellphones are you using? How do you sync - over the air, with 3rd party software etc. The problem might be with one of the phones or software, if using sync software.
    Does it happen if you use safe mode? if so, an addin may be at fault.
    Disabling the duplicate checker might help - but if so, you'll end up with duplicates.
    Diane Poremsky [MVP - Outlook]
    Outlook & Exchange Solutions Center
    Outlook Tips
    Subscribe to Exchange Messaging Outlook weekly newsletter

  • Version 10 installed but at various times converts back to ver 3. What can be done to keep ver 10 intact?

    I have installed FireFox Ver.10 numerous times but at various times, perhaps after using for several days, it will somehow revert back to Ver. 3. What is happening and how do I fix it?

    Which security software (firewall, anti-virus) do you have?
    Some security software has virtualization features that can restore files in the Firefox profile folder.

  • TS5223 After my iphone updated to ios7, it reverted back to my old icloud account which I do not know the password, do not have access to the email it sends the reset to and the reset for security options say my birthday information is wrong.

    Help!!! I've lost all of my contacts and information after the ios7 update. After the update I plugged my phone into my MacBook and it reverted back to my old icloud account. I checked my MacBook and everything on there is connected to my new icloud account. I'm not sure why this has happened, but I have been trying for two days to get my new icloud account back. My phone won't allowe to log out of the icloud account it is logged into because I don't know the password. Simple solution, reset the password. Not so simple. I don't have the email address associated with the account anymore. So I attempted the security question option. When I entered my birthdate, it said that it was incorrect. I have tried multiple times and nothing will work. Can someone please help me??

    If you don't know your password, don't know your security questions and don't have a rescue address or don't receive a reset email, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
    If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support.

  • My iPhone4 can't sync to Itunes after I have updated the iPhone to ISO5.0. now my iPhone can't play music. whenever i go to play my music on my iPhone it just reverts back to the playlist. hopeless! ISO5.0 is as bad as Microsoft stuffs.

    I have recently updated the iTunes in order to update both my iPhone and iPad to ISO5.0. unfortunately, after the updated, my iPhone is no longer playing any music. whenever i go to play music on my iPhone it just reverts back to the playlist or it keeps running through song to song. But still, no music is on.
    I tried to re-sync the music library, error mesage prop up,
    "The iPhone 'xfdsarw' could not be synced because the sync session failed to start"
    I delete the iTunes and download it again. Then, I restore my iPhone to the version before ISO 5.0. After, I do the updated again. However, the problem still exists. What should I do? Please advise. I cant believe that iPhone cannot play iTunes!!!!
    How come, apple acts like Microsoft? I saw this problem had existed in the developer stages back to the past summer. Then, you guys didnt fix it before the release of ISO 5.0. Hopeless. As being a life-long apple fan, I am so disappointed! Wordless  ....

    My music can be played in my iMac and iPad itunes, but not my iPhone4.
    i did what you have suggested to unsync the music and then re-sync again. should i try to cancel all the music in the library and then restore them again. can it work? i dont want to bet coz reloading so much music is very trouble. 

  • Apple Composite AV Cable no longer working on Ipad2 after ios8 update. Only getting sound, can you revert back to ios7 or buy a cable that will work any help would be appreciated

    Apple Composite AV Cable no longer working on Ipad2 after ios8 update. I'm only getting sound no video can you revert back to ios7 or buy a cable that will work any help would be appreciated
    Thanks

    The 30-pin connector on the iPhone 4 dock might not have all the connector pins to do video.
    I'm 99% sure the Universal Dock does have the pins (and therefor supports video out).

  • After updating Camera Raw from 8.4.1 to 8.5, it revert back to 8.0

    During last Creative Cloud periodic update, I saw in the list the update to ACR 8.5. After the update, I have checked, and on both Bridge and Photoshop, the version of ACR reverted back to 8.0. Before of the upgrade was 8.4.1. In the order, I tried to:
    1) Update from internal functions of Bridge and Photoshop. Update check result was that there wasn't available update (ACR appeared in the list as application)
    2) Install manually ACR 8.5 from a manual update package indicated in a similar post on this forum.
    3) Uninstall both Bridge and Photoshop.
    4) Re-install Bridge and Photoshop.
    After all actions, the ACR version available is still 8.0. I'm really surprised, because I can't understand from where is coming the 8.0 version, considering that my version before the update was 8.4.1.
    OS Windows 7 64 bit
    Bridge CC 6.0
    Photoshop CC 2014
    Can anyone help me?

    I assembled the two answers from Noel and Ashutosh that, executed in the following order, let me circumvent the bug of the updater.
    Many thanks to Noel and Ashutosh
    I don't know how geeky you want to get, but if you're comfortable navigating around folders and zip files, here's a manual technique that will work...
    Close Photoshop first, then:
    Download the 8.5 manual update link from here:  Don't run the installer, but instead just Open the zip file in Windows Explorer.
    http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw8-8.0/8.5.50/setup.zip
    Navigate inside the zip file to find the resources inside that correspond to the 64 or 32 bit Photoshop version that you're running.  I assume you have installed the 64 bit version, so the rest of the instructions will concentrate on the 64 bit Camera Raw.8bi only.  Here's the path:
    setup.zip \ payloads \ AdobeCameraRaw8.0All-x64-050614143245 \ Assets1_1.zip
    The file within Assets1_1.zip, named 1002, is actually the Camera Raw.8bi file for 64 bits, just with a different name.
    Copy 1002 to your folder on your computer where your Camera Raw.8bi normally lives, e.g.,
    C:\Program Files\Common Files\Adobe\Plug-Ins\CC\File Formats
    Rename the old Camera Raw.8bi file to Camera Raw.8bi_8.0.  It's important that the extension is changed to something other than .8bi.
    Rename 1002 to Camera Raw.8bi
    Run Photoshop and verify the Camera Raw version by choosing Help - About Plug-in... - Camera Raw.
    -Noel
    Please install DNG converter from following link. This would update the Camera Profiles to 8.5 version. .
    http://blogs.adobe.com/crawlspace/2011/03/keeping-photoshop-up-to-date.html#currentversion

  • Palm T|X Upgrade to Treo 700p and Revert Back to T|X Due to 700p Problems. Now I Can't Update the T|X

    Here's the story. I am a long-time Palm power user and I have rarely been stumped but I am very stumped right now. I have used my Palm T|X for several years without any sync problems. I upgraded to a new Palm Treo 700p (Verizon) so I can carry one device instead of a PDA and a cell phone. I initially migrated my data from the T|X to the Treo 700p with no major issues. The Treo 700p worked fine for a couple of weeks until I started using the camera. After I started taking pictures and storing them in the on-board memory, wierd things started happening such as screen freeze-ups, screen white-outs, and processor delays. After talking with other Palm users, I was informed that this behavior is typical of the 700p when pictures are stored in on-board memory and that I should move the pictures to my SD card.
    I moved the pictures to the SD card and perfomance improved. However, after another week or so, the freeze-ups started again. Everyone that I know who has a 700p or 700w reports the same issues so I'm starting to believe that the 700p has design flaws or bugs that were never fixed. Due to the frustration and productivity losses that I sustained with the Treo 700p, I decided to revert to my trusty T|X.
    I initially started using the Treo on 8/12/2009 and I synchronized the T|X to the desktop before synchronizing the data to the 700p. On 09/16/2009 I started trying to re-synchronize the T|X. I did a hard reset and memory clear on the T|X so all of the updated data in the desktop could come over to the T|X without duplicates. However, when I synchronized the T|X, my data was only updated as of 8/12/2009 even though the palm desktop has data updated up to 9/16/2009!!
    Please explain what is keeping all of the updates from coming over to the T|X. Thanks for the help.
    Post relates to: Treo 700p (Verizon)

    Are you sync'ing the 700p to the same username in Palm Desktop as the TX?
    If you are, this will cause problems on the new device. When you sync the device, it saves the device settings, 3rd party apps, preferences, etc. in the backup folder in the username folder on the PC. When you sync the new device it copies the contents of the backup folder for the old device to the new device. This will cause corruption in the settings for the new device thus causing erratic behavior of the new device. The TX does not have a camera and you are sync'ing the backup folder for theTX that does not have a camera app. to the 700P.
    Click on the following link to the kb.palm.com webpage for the article regarding Upgrading from a previous Palm OS handheld.
    http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=12926
    I would suggest exporting the data from the current username, create a username for the TX and import the data to that username and only sync the TX to that name. You will need to rename the backup folder in the current username to backup.old, hard reset the 700P and sync to the current username. You will need to hard reset the TX once you have the data in Palm desktop in a seperate username to remove the backup folder contents on the TX.
    The best way to preserve your data is to export the data in each category in Palm Desktop to a seperate folder on your PC.
    Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. Click on the link below and follow the instructions on that page for the export procedure.
    http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28734
    Make sure you select all for the range in the export window.
    With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive.
    Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
    With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.
    For reference purposes, click on the following link for the support page for your 700P device on the kb.palm.com webpage.
    http://kb.palm.com/wps/portal/kb/na/treo/700p/verizon/home/page_en.html
    There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
    For reference purposes, click on the following link for the support page for your TX device on the kb.palm.com webpage.
    http://kb.palm.com/wps/portal/kb/na/treo/700p/verizon/home/page_en.html
    There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
    Message Edited by cygnusX1 on 09-18-2009 03:33 PM

  • I updated to the latest version of Safari now I cannot log into certain websites like my online banking.  How do I revert back to an older version?

    I updated to the latest version of Safari now I cannot log into certain websites like my online banking.  Another reason I loved using this computer was autofill, now that does not work the same either, I have to respond twice to get my info to fill in.  I fill out many forms in a day and this change has been so bad that I have downloaded Mozilla Firefox to use instead.  I hope apple fixes these issues but until then how do I revert back to an older version of Safari?

    Quit Safari.
    Open Keychain Access   /Applications/Utilities
    Select Passwords on the left. Delete any keychains for sites you have problems logging into.
    Relaunch Safari. Go to Safari / Preferences - Autofill. Make sure all three boxes are selected.
    Now navigate to a site, login with your user name and password. You should be prompted to save that data to a new keychain. Click Yes.
    If you still have problems, go to ~/Library/Cookies. Move the Cookies.plist file to the Trash.
    ~ (Tilde) represents your Home folder.
    Try logging into a site again.

  • I updated my phone to 5.1 and now my pictures are missing, my calendar is blank and my contacts reverted back to a year ago

    I updated my iPhone 3 to 5.1 and now my calendar is blank, my contacts and photos reverted back to about a year ago!!

    Contacts should be synched to your computer (outlook, address book) or a cloud service (iCloud, Google).  If you haven't been using your phone as recommended, your contacts are gone.

Maybe you are looking for