Update to FF5.0 fails. patch apply fails.

The Update could not be installed (patch apply failed)
This response shows up on software update window.
I am still stuck on FF4. Not getting the 5.0 version installed for some reason.

Hi Steve,
Not a solution I'm afraid, but I also get an error message, 'cept mine states I'm not connected to the internet even though I am. I'd also like a solution!
Pete

Similar Messages

The Update could not be installed (patch apply failed) this keeps happening after it has told me to update Why ?

while running Firefox it comes on the screen saying security update so after it ties to update this comes on the screen "The Update could not be installed (patch apply failed)" I am running Firefox 6.0 and don't seem to have any other issues with it but it asks me several times to do this update but still says it cant do it
I am running windows vista

If files already have been downloaded then remove the files in the updates and updates\0 folder.
You can also delete the active-update.xml file.
*http://kb.mozillazine.org/Updates_reported_when_running_newest_version
Software Update not working properly:
*http://kb.mozillazine.org/Software_Update
* C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates

Cannot update Mozilla. It says "The Update could not be installed (patch apply failed)"

When updating Mozilla, I get this message:
"The Update could not be installed (patch apply failed)".
What should be done?

With that one, I'd try updating using a .dmg installer downloaded from the Apple Website:
http://www.apple.com/itunes/download/

The Update could not be installed (patch apply failed)

The Update could not be installed (patch apply failed)
Stuck on FF4.0. Update to 5.0 fails to install.

Ok I'll try that when I have time. TYVM I think your right, it should work.
Just haven't been to worried about it as 4.0 is doing ok with me. But I may as well get the newer version huh?

Error: ' The Update could not be installed (patch apply failed)' . It keeps trying to install this patch but my version is the latest one!!

I have the latest version of firefox. I know this because your website says so. But for some reason, my current firefox keeps trying to install a new version by "trying" to install a patch. But it fails every time.
I cant say exactly when this started. A few weeks ago, firefox was behaving erratically (crashing for no reason at every launch due to some video plugin fail) but i uninstalled and reinstalled (a few times) and it was fine after the last one.

If files already have been downloaded then remove the files in the updates and updates\0 folder.
You can also delete the active-update.xml file.
*http://kb.mozillazine.org/Updates_reported_when_running_newest_version
Software Update not working properly:
*http://kb.mozillazine.org/Software_Update
* C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates

Cannot update Firefox. It says, "Update could not be installed. (patch apply failed). Cannot take the risk of uninstalling MF.

Am unable to update my firefox and also cannot install any other browser like chrome or opera. I had uninstalled Chrome and cannot re install it. My internet explorer is not working as well. So cannot take the risk of uninstalling firefox and install a fresh version (it might fail). However I have scanned and checked my computer as far as possible with multiple programmes and no trouble is reported. All other programmes in my PC are running fine. Windows, internet security is getting updated smoothly. The only problem here is installing browser(s) or updating it.
I am on win 7 64 bit system. Firefox version is 31. It iis constantly asking me to update to 32.0.2. I have tried all specified ways to update it, but failed.

Try this:
*Download the full Firefox installer and save the file to the desktop https://www.mozilla.org/en-US/firefox/all/
*Start the installation with a double-click on the desktop icon
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware

The Update could not be installed (patch apply failed)...I received this error message. I have no idea what this is. Please help

please help with this error message

Go to http://www.mozilla.org/en-US/firefox/new/ and download the full 8.0.1 installer. Save it to your desktop and close Firefox. Run the installer and you should be updated.

Update failed...could not be installed (patch apply failed) - I use 7.0.1

Update failed. The Update could not be installed (patch apply failed). It appears to want to upgrade from 7.0.1 to 8. But when I click the link, it does not offer updates, just an entire strip/reinstall! Where is the updates page? Help?

Thank you. I don't want to reload the entire thing - yes, it can be entirely reloaded, but I don't want to lose settings. How do I upload the PATCH as offered?

I can't update my existing firefox 8.0.1 to 9.0.1 on my new MacBook Pro OS X Lion (patch apply failed)?

I can't update my existing firefox 8.0.1 (when prompted by updater) to 9.0.1 on my new MacBook Pro OS X Lion. Update failed with 'patch apply failed' message.

resolved

I tried to update to 3.6.14 but it was unable to install the update & tried a complete update with "patch apply failed" as a result. it is not listed in the 'unistall program" area of my Windows Vista. how do I uninstall and reinstall Firefox?

I have no other issues withmy computer as I have used PC's for years and am quite familar with their operation. teh questions pretty much says it. After attempting to updat firefox is totally unreliable shuttign down eityher after a few seconds or a few minutes never longer. I curently have version 3.6.13 and the update for 3.6.14 will not install due to a " patch apply failure" as mentioned. I have Windows vista currently and use firefox for the online assignments I do with school, least amount of compactablity issues.

Hi NWL1,
Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario

July PSU 11.2.0.3 patch apply failed

We installed oracle GI (Grid Infrastructure) and Oracle 11.2.0.3 on a single node Linux.    The GI home is owned by the user grid to include ASM storage configuration and Oracle home is owned by user oracle.   After we installed GI home, configured ASM, installed oracle home, and created an oracle database (no listener was created at this point yet).   I tried to run the July PSU 11.2.0.3 patch for both GI and Oracle home.    Here is the procedure based on the oracle readme instruction:
Problem Description
This is single node Oracle EE installation of GI, ASM, and Oracle 11.2.0.3. We tried to apply the patch PSU (p16742216_112030_Linux-x86-64.zip). It is failed on GI apply. But oracle database home apply seems fine. GI home owned by user grid and Oracle DB home owned by user oracle.
Here is the procedure we did:
1. Download the patch set 16742216 for our Linux version and unzip to a location.
2. Download and upgrade the opatch to 11.2.0.3.4 (p6880880_112000_Linux-x86-64.zip)
3. Shutdown the DB, ASM (there is no listener on the DB configured yet).
4. As oracle user create the configure file: Create the ocm response file in turn off ocm option (run as oracle)
$ORACLE_HOME/OPatch/ocm/bin/emocmrsp -no_banner -output /home/oracle/unconfig.rsp
5. Run the command as root without any oracle environment variable setup
/oracle/product/11g/OPatch/opatch auto /home/oracle/dba/patches/patch_16742216 -ocmrf /home/oracle/unconfig.rsp
[root@lsildb10p oracle]# /oracle/product/11g/OPatch/opatch auto /home/oracle/dba/patches/patch_16742216 -ocmrf /home/oracle/unconfig.rsp
Executing /grid/product/11.2/grid/perl/bin/perl /oracle/product/11g/OPatch/crs/patch11203.pl -patchdir /home/oracle/dba/patches -patchn patch_16742216 -ocmrf /home/oracle/unconfig.rsp -paramfile /grid/product/11.2/grid/crs/install/crsconfig_params
/grid/product/11.2/grid/crs/install/crsconfig_params
/grid/product/11.2/grid/crs/install/s_crsconfig_defs
This is the main log file: /oracle/product/11g/cfgtoollogs/opatchauto2013-08-26_11-51-27.log
This file will show your detected configuration and all the steps that opatchauto attempted to do on your system: /oracle/product/11g/cfgtoollogs/opatchauto2013-08-26_11-51-27.report.log
2013-08-26 11:51:27: Starting Oracle Restart Patch Setup
Using configuration parameter file: /grid/product/11.2/grid/crs/install/crsconfig_params
patch /home/oracle/dba/patches/patch_16742216/16619898/custom/server/16619898 apply successful for home /oracle/product/11g
Error Codes
CRS-4640: Oracle High Availability Services is already active
CRS-4000: Command Start failed, or completed with errors.
=================================================
After that, I checked with opatch version.   It looks the Oracle DB Home patch applied fine, but not GI Home.     In the error message it shows the "crsctl stop has" command was failed .
Then, I tried to run the command manually by grid or root. Both were failed too. I am not sure why and need the solution on it.   Any suggestions?
Thanks in advance.

Pl post the exact error messages from the log files. Pl see if MOS Doc 1283964.1 is relevant. If you have followed all of the documented steps in the Readme of the patch, pl also open an SR
HTH
Srini

(PS3) GT6 update 1.10 installation fails repeatedly

Hi, I have a serious problem with installing update 1.10. The system downloaded and installed the 2GB installation package but when the game started and the installation script wanted to apply the update the installation failed during the process. The only option was to press OK button but the update procedure started over and over again with the same result. I did a complete restore of my PS3 to its defaults and formatted the disk (full format). Even after that I couldn't update GT6. The game can run without any updates installed. Once I check for updates, the system downloads all 9 packages and installs them. Then I start the game and the update proceduce fails the same way like before the PS3 restoration. How could I solve it?

For those who are still struggling with updating problems...pls try to follow steps mentioned below...at least them worked for me !I found these instructions from elsewhere on this site...--------------------------------Hi mate, sorry to hear of your troubles. Settle in because I'm about to write a novel. Seems like you covered most of the big things to try.Unusual that a new formatted HDD is still giving you trouble.Sounds like the issue is probably related to the downloads then, possible packet loss, causing issues with the install. Are you using a wired or wireless connection?Obviously wired is better and you should always use that if possible.Wireless is more susceptible to packet loss during downloads than a wired connection. Do you have a copy of your save file?Are you installing copy that before you try the updates?In other words, any chance the save file is corrupted and causing you issues? Digital download or disc copy?Obviously, also make sure the disc is clean and not scratched, and the laser lens is clean. Only a few things come to mind that you may not have tried.One is downloading the patches in stages.Another is downloading via the new v4.60 XMB option.(Never done it, not sure how it works, but doubtful it will make much difference)The last is an in-game function ... switching off the 'Install Game Data' option.(I'm unsure exactly how this function works) At this stage, considering the game isn't functioning at all, you may as well delete all traces from the HDD.New HDD ... so refomat?Option available from the XMB.XMB ... Settings > System Settings > Restore PS3 System.I believe you will need to update PS3 to v4.60 again.Check HDD looks okay regarding System Software Version and Free Space.XMB ... Settings > System Settings > System Information. Otherwise remove all GT6 files from the console manually.For disc copy XMB ... Game > Game Data Utility > delete GT6 file. XMB ... Game > Save Data Utility > delete both save file (GT6 and GT6 Backup)If digital copy XMB ... Game > Game Data Utility > delete GT6 file. XMB ... Game > delete GT6 icon. XMB ... Game > Save Data Utility > delete both save file (GT6 and GT6 Backup)Again, just check HDD looks okay regarding System Software Version and Free Space. So .... once happy everything is removed, load GT6 onto console.If disc version start the game offline.If digital version download the game only.Start the game offline (or cancel option to Update Software) and confirm it's playing correctly.Play far enough to establish a save file.Quit game, and still 'offline' restart the game and again confirm all is good, and at this point you could consider swithing off the 'Install Game Data' option.Start button > Options > Game Data > Install Game Data.Check link for details.http://www.gran-turismo.com/us/gt6/manual/#!/save_load/autosaveYou may need to manually save to hold this setting change.So you now have a functioning game with a valid save file and the 'Install Game Data' function switched off. Okay, time to try updates.You could consider doing it in stages.Each patch will download and then install.Once installed, the next patch will begin downloading etc etc.It is possible to cancel out of the download once a file has installed. (circle button) So if it says 'Downloading File 1 of 9' allow for the download and install to finish.When it changes and says 'Downloading File 2 of 9' cancel the process.You should now have updated to the next version ... eg v1.01.You should now be able to play the game (by cancelling the option to Update Software) and check everything is okay. So try updating and installing the first patch file.Check the game is playing correctly.If you have the 15th Anniversary content, you could now consider introducing that the the game data.Access from XMB.XMB ... PSN > Account Management > Transaction Management > Download List.If you have a USB copy of your save file, you could also consider reintroducing that.If you do either of these things, check the game is still playing correctly before proceeding with the other updates. While testing game, you could also consider switching on the 'Install Game Data' option from the in-game menu.You may need to manually save, and then quit and restart game for the function to activate.It's unknown to me exactly how this function works.Whether anything will install immediately after you switch it on, whether it's not until you restart, or whether it will install anything at all, I'm not sure.After giving that a go, you could consider switching it back off again, and manually saving.(As I say, I'm unsure how this function works. Whether this is a worthwhile exercise is perhaps questionable, but apart from wasting a bit of time I see nothing wrong with trying it at each step.) Then try next patch.Download and install "File 2 of 9'.Cancel download once finished.Check game is playing correctly and manually save.Switch on 'Install Game Data'.Initiate data install, then switch off function and manually save. *Special note for v1.02*There is a known issue for updating forwards from v1.02.Check the link for details.http://www.gran-turismo.com/au/news/00_3266694.html Continue with 'File 3 of 9'.Repeat process as before. Next patch ... etc etc etc.Checking game and installing data (if available) after each patch. Going roughly from memory ...v1.01 and v1.02 were around 1GB and 1.2GB.v1.03 - 1.06 were all quite small.v1.07, v1.08, and v1.09 were again around 1GB or larger.So you might choose to skip through a few patches part way through if you wish. As I mentioned earlier, v4.60 introduced a new Game Update function to the XMB.By pressing 'Triangle' while on the GT6 (or any) game icon brings up a menu.On this menu is a new 'Check for Update' option.This allows you to check for updates without launching the game.How it works if it finds an available update I'm not sure. (haven't had a chance to test)So I don't know whether there's any advantage trying to patch GT6 via this option.But it's there if you want to try it out as another alternative. Obviously, with all that said, there is no guarantee it will work.With a new HDD, a regular full update in one go shouldn't be an issue, so there's a problem somewhere.Maybe the step by step approach will help.Again, and most importantly, wired connection if possible. If no luck it's just a case of try and try again.As you mentioned, using a friends internet, particularly with a different ISP and/or better connection, is a good option. Please let us know how you get on.Also, please let me know if there's a problem/error/mistake with how I've described any of the procedures.And if you could add anything to that step by step approach, or info. on the XMB 'Check for Updates' function it would be greatly appreciated. Best of luck with it.

My 4s wa showing update to iso7 so I updated and it kept failing now its not showing an update at all and saying my iPhone 4S is up todate on USO 6.1.3 help???

My 4s wa showing update to iso7 so I updated and it kept failing now its not showing an update at all and saying my iPhone 4S is up todate on USO 6.1.3 help???

Now it's not showing any update on my phone Iv turne it off and bk on again but still saying software is up to date on 6.1.3

How can I get latest update for Photoshop Elements 9?? I have been trying for a month and the update download continues to fail.

Photoshop Elements Update download continues to fail after at least 4 weeks.

Try downloading the updates from here:
windows
Adobe - Photoshop Elements : For Windows
mac
Adobe - Photoshop Elements : For Macintosh

Update Photoshop CC 2014 failed Error U44M1I210

Hello Forum members,
does anyone have a solution? It seems to me, that there is a wrong entry in the registry of my Laptop. No one of the suggested Actions of Adobe was successfull. Ideas and Solutions would be very appreciated. Hermann

Dear Ned,
Thanks for yor quick reply. I tried all the suggested actions exept solution 4 several times. They didn't work.
I could not find a installation log file from today. The latest one I found is from 01-14-2015. It does'nt show any issue. (see attached)
The error message I received during the latest attempts to update Photoshop CC 2014 is (translatetd into English):
"Update failed - More Infos"
"The downloaded files could not be extracted. Click on "Repeat" to repeat the download. (U44M1I210)"
Hope you can help me to solve this problem.
Kind Regards
Hermann von Eiff
Von: Ned Murphy
Gesendet: Samstag, 28. Februar 2015 18:25
An: Hermann von Eiff
Betreff: Update Photoshop CC 2014 failed Error U44M1I210
Update Photoshop CC 2014 failed Error U44M1I210
created by Ned Murphy <https://forums.adobe.com/people/Ned+Murphy> in Creative Cloud Download & Install - View the full discussion <https://forums.adobe.com/message/7238980#7238980>

Update to FF5.0 fails. patch apply fails.

Similar Messages

Maybe you are looking for