Update to iTunes 11.1.4 fails on Windows 7 and iTunes doesn't work anymore. How will we be able to receive future updates to correct this problem ?
Now that iTunes doesn't work, how will we be able to receive future updates that corrects this problem ?
The problem is on the PC with Windows 7... where iTunes doesn't work anymore.
Similar Messages
-
itunes doesn't open or work after update. Tried everything still doesn't work. HOW CAN I FIX THIS??????
Hello, llynitta.
Here are the best resources for troubleshooting the issue you are experiencing.
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1421
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Jason H. -
When I run diagnostics I get error 43 telling me to repair install itunes and that doesn't work either.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
Update to iOS 7.0.4 and ringtone button doesn't work anymore, why???
Double click home button, then swipe up on app picture (not the icon itself)
-
Synchronisation between web and desktop doesn't work anymore (update)
Before today, I could synchronize my files between Web and my Desktop. It doesn't work anymore.
It tells me "Available soon"... It worked fine until today...
>>> That's ok, it's working again since a few minutes...The problem is on the PC with Windows 7... where iTunes doesn't work anymore.
-
There is a feature on the Walt Disney World website to search for available times at restaurants. The information can be entered but after clicking on "Search for a table" the website never returns any information.
Agent wrote:
I discovered the problem that the upper top right button (usually used to mute) does not send my device to standby anymore when being pressed longer than 3 seconds.
Together with this problem I discovered something that is also working different than before.
When I press the keyboard lock button (upper top left button) the lock now gets activated directly and
the screen turns black. Before this update took place the owner details were showing up when pressing this button and the screen turns dark after the defined time to go off.
The owner details are added correctly and show up when going to properties-owner.
This is working as designed with the new upgraded operating system you installed. There is not an option to change it back, only to downgrade your operating system back to the version you had installed previously.
If you want to lock the screen, you will need to set a password on the device.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I'm trying to burn playlists onto a cd from itunes. I keep getting a "medium write error" message. What does this mean? I heard that this may mean that I should try burning at a slower speed. I tried this and that didn't help. I also heard that I may need to use a different brand of CD-R disc. I have not tried this yet. I also heard that it could be a software issue or disc drive issue. I recently updated my macbook pro software from tiger to snow leapord. Do you think this could have affected my itunes playlist burning capabilities? Thanks for the help.
A system upgrade should not have affected anything. When did you notice the loss in functionality?
Try different media. 2011 post on optical media - http://discussions.apple.com/thread.jspa?threadID=2754858&
Apple Portables: Resetting the System Management Controller (SMC) - http://support.apple.com/kb/HT1411
Realize that a MBP that came with Tiger is an old computer and optical drives do not last forever.
You could try a drive cleaning disc to remove dust. Don't be overly optimistic. I suspect it is an old drive issue. -
After 7.3 update I get an error in outlook 2000 and it doesn't work anymore
I upgraded itunes 7.2 to 7.3 and now when I open outlook 2000 I get a microsoft error outlook has to close. Everything was working fine before the itunes & quicktime update? Everything points to the itunes update??? I do a system restore to before the update and everything works again??
First man up and admit, that itunes does not suggest, but tells you that update is available and you made a
decision to download and update. Once you man up - think if you still under warranty. If that is not security
software according to the link provided, it is hardware. So second try another network, may be your network
has additional security or firewall. And third decide if it worth to you pay 149 for that phone or get it replaced.
Unless your 3gs under warranty. -
?My iPad updated and now wants a security code for access and I never gave it one. I tried code I used for my phone and it doesn't work. How can I access now?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
since updating to firefox 09 my scroll feature on my touch pad doesn't work. How do I fix this, please? I have a Gateway laptop. This has never happened before with other updates.
Thanks so much!!Thank you so much for your link - unfortunately it is totally beyond my skills to understand or correct the bug as posted. I can find the touchpad icon and right click to open the options and that's about my speed. If this is a bug should I uninstall Firefox 9? Thanks so much...
-
When I install Photoshop CC it says that an update failed to download and whenever I retry it doesn't work. How do I fix this?
Update that fail can sometimes be downloade and installed manually also here is a Trouble shooting Update guide http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html#TroubleshootUpdates
Adobe - Photoshop : For Windows
Adobe - Photoshop : For Macintosh
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 -
my iphone 6 wont turn on after i updated it and it doesn't work to restore it in itunes. what should i do?
Hello ole-gunnar,
Thanks for using Apple Support Communities.
If your iPhone is unresponsive after updating your iOS version, then I'd like you to please follow the troubleshooting below.
If you see a black screen
You might need to charge your device before it can turn on. Plug in your device and let it charge for at least 10 minutes (20 minutes for iPad), then try turning it on.
You should see a battery icon while your device is charging. If you continue to see a black screen, reset your device. If your device doesn't respond when you press buttons
Your device might not return to the Home screen when you press the Home button, wake from sleep when you press the Sleep/Wake button, slide to unlock or power off, or it might appear frozen. Try these steps:
Restart your device.
If it still doesn't respond, or if it doesn't turn back on, reset your device.
If your device gets stuck during startup
When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
Get more help
If you still need help after trying the steps above, contact Apple Support.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Cheers,
Alex H. -
My 6th generation nano isn't recognized by my computer. When I plug it in an error message pops up, which says "USB Device Not Recognized". Does anyone know how to start trouble shooting this? I updated both windows and iTunes.
Work through all the suggestions in this Apple support document first.
iPod: Does not appear in Windows or iTunes and Device Manager is empty
B-rock -
Updated iTunes to 10.5, iTunes won't work now! Everytime I open iTunes it just freezes and I can't click on anything. It says to take it out of compatibility mode and still doesn't work! any help??
Thank you. NickOkay, we'll try the technique from the following post. Be sure to be logged in to your usual user account when doing so. (Otherwise you'll be editing the wrong set of HKEY_CURRENT_USER keys.)
Re: How do I turn off the compatibility mode for ITunes.
Does that clear up the compatibility message? -
Every time i connect my iphone to itunes and trying to do a backup or get the new update it says i have to restore my iphone. and then that doesnt work, i tried to reinstall itunes but it doesnt work. i get this all the time. fix it please.
iTunes states " There's a problem with your Iphone, please contact apple service center " Also i took my iphone to a local service man and he told me the IMEI code has been corrupted and there's nothing that can be done about it. Please help, if you have any solution.
Thank you
Maybe you are looking for
-
HELP! No longer able to capture HDV in FCP 6
I had a seamless FCP workflow using my Canon XH-A1 and FCP 6. I always connect my camera and power it up first before starting FCP. My settings were perfect, then about a week and a half ago FCP would no longer capture HDV from the camera. I tried re
-
Automatic reflection of changes in JSP pages in R12i
As per note metalink note 458338.1, i have set the main_mode from justrun to recompile in context file and run autoconfig. Also confirmed for the entry in $INST_TOP /ora/10.1.3/j2ee/oacore/application-deployments/oacore/html/orion-web.xml file. Still
-
Displaying Column name in a text field
I am running a report in a spreadsheet format using the across orientation.. the last column is a total total of the previous columns and I need to display a title 'weekly totals' at the top of this column,, I am trying to write code to return a text
-
Dear Forum, At my client's place if any material like Alternator of Motor is going for repairing or Overhauling purpose they maintain the data in Gate pass format manually..But now they want to do it in SAP... The details are as follow-- 1. Vendors N
-
Distributing wlclient.jar file - Licensing issues?
Hi, I am working on creating an Eclipse plug-in which will be using wlclient.jar file. This is a open source project and is not used for commercial purpose. May I know if there are any licensing restrictions to distribute wlclient.jar as part of the