Update to iTunes released

http://www.ilounge.com/index.php/news/comments/apple-releases-itunes-501/
I wonder if this will fix the problems with Contacts/Calendar syncing.

No one knows.
I finally tried to sync my Nano 2G with iTunes under Vista today. It works, but there are issues. Never ever plug your iPod in or out when iTunes is running. iTunes gets totally confused. Always first plug in your iPod, then start iTunes. Eject your iPod using the eject button in iTunes.
About AirTunes (Airport Express). Yes it works !
There's on thing (also reported on the Airport forums) the Admin Utility doesn't work under Vista. Something which works is connecting using the IP address (127.16.1.1 for me, guess it's the standard one) + password. Then you can enter the configuration and save settings.

Similar Messages

Update to iTunes 7.7 Release - Now I have a problem.

I am curious if anyone is having this problem.
I updated to iTunes 7.7 release today on my development system (a mistake as I have been chasing this now all evening). The problem I am having is that when I build my app for the device the app installs on the iphone.. but now it takes nearly 3 minutes to do it compared to the 30-45 seconds before.
I have rebooted my Mac Pro and restarted the iphone. I can conly conclude that either it is iTunes or perhaps something that was caused by the installation of AIM or something like that on the phone (seems unlikely).
I just don't know what to do to fix it. I am not excited about resetting the phone and going through the **** it was to get provisioning to work again.
I'd appreciated any thoughts or like experiences.

I was trying to figure this out today. I just installed the final 2.0 software and wiped out all the applications I have previously installed.
Now installations of my apps were the usual speed. I then installed the Facebook and light applications and everything was still fine. Then I installed Super Monkey Ball.... BOOM!! The installation speed dropped to a few minutes. I then removed it and the speed went back up.
At this point I don't know if there is something wrong with SMB or if it's just faster when you have hardly any content installed.
Give it a try and post your findings.

With the new updates for iTunes, I can no longer print a CD case playlist when I burn a CD. It prints in a jumbled mess. I have reinstalled, updated, run diagnostics on my NEW printer, I am out of ideas!

With the new updates for iTunes, I can no longer print a CD case playlist when I burn a CD. It prints in a jumbled mess. I have reinstalled, updated, run diagnostics on my NEW printer, I am out of ideas!

It appears to be a bug with the current build. Hopefully it will be fixed in the next release.
tt2

The info for my music on my iPhone 4S is no longer updating when it gets updated in iTunes. Is this an new iOS 7 thing or something else?

I manually manage my music on my iPhone 4S but I used to be able to update song information, lyrics for example, in iTunes and it would update on my iPhone when I synced it. It no longer does that. I've never had this problem before and I updated both iTunes and the iPhone firmware and no luck. I don't think this is something new in iOS (at least I hope Apple isn't that stupid), so does anyone have any ideas?

Hello! Unfortunately, MusicFree got removed from the app store, along with all the other music downloader apps. We hope to release a new version of it, but it will not have the downloading capabilities.

Software update for iTunes gives an error. Please help.

It gives an error while performing a software update to iTunes 12.0.1
Error as seen below:
The update “iTunes” can’t be installed.
An unexpected error occurred.
My current iTunes version from About iTunes is 11.4(18) 64 bit
I saw few of them posting their install.log from console which I am putting for reference. Please help to update the version.
Marker - Dec 17, 2014 11:43:08 AM
Dec 17 11:45:36 Mihirs-MacBook-Pro Software Update[754]: JS: 10.7.5
Dec 17 11:45:37 Mihirs-MacBook-Pro diskmanagementd[769]: DM ->T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: inHostDiskUDS=0x107a39c20=disk0s2=Macintosh HD inWhatStr=RecoveryInfoBaseSystemVersion
Dec 17 11:45:38 Mihirs-MacBook-Pro diskmanagementd[769]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did get booterRecoveryUDS=0x107a39ae0=disk0s3=Recovery HD
Dec 17 11:45:39 Mihirs-MacBook-Pro diskmanagementd[769]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did mount nobrowse; MP=/Volumes/Recovery HD OMS=0x7f9903006430
Dec 17 11:45:39 Mihirs-MacBook-Pro diskmanagementd[769]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: getting dict from file=/Volumes/Recovery HD/com.apple.recovery.boot/SystemVersion.plist
Dec 17 11:45:39 Mihirs-MacBook-Pro diskmanagementd[769]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: got dict (or NULL=will return err): oooInfoDict=0x7f9901419cb0
Dec 17 11:45:40 Mihirs-MacBook-Pro diskmanagementd[769]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did if-needed-best-effort unmount
Dec 17 11:45:40 Mihirs-MacBook-Pro diskmanagementd[769]: DM <-T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: retErr=0 outInfoDict={
     ProductBuildVersion = 11D2001;
     ProductCopyright = "1983-2012 Apple Inc.";
     ProductName = "Mac OS X";
     ProductUserVisibleVersion = "10.7.3";
     ProductVersion = "10.7.3";
Dec 17 11:45:48 Mihirs-MacBook-Pro Software Update[754]: JS: 10.7.5
Dec 17 11:45:51: --- last message repeated 1 time ---
Dec 17 11:45:51 Mihirs-MacBook-Pro Software Update[754]: JS: Firmware is up to date.
Dec 17 11:45:51: --- last message repeated 1 time ---
Dec 17 11:45:51 Mihirs-MacBook-Pro Software Update[754]: JS: model = MacBookPro8,1
Dec 17 11:45:52 Mihirs-MacBook-Pro Software Update[754]: JS: 10.7.5
Dec 17 11:46:01: --- last message repeated 4 times ---
Dec 17 11:46:01 Mihirs-MacBook-Pro Software Update[764]: Acquired Lock: 501, 754, 0
Dec 17 11:46:01 Mihirs-MacBook-Pro Software Update[764]: Releasing Lock: 501, 754, 0
Dec 17 11:46:27 Mihirs-MacBook-Pro Software Update[754]: Calculated need 1870.195 MB; 317806.137 MB free; 317806.137 MB available with MTM reclaim
Dec 17 11:46:27 Mihirs-MacBook-Pro Software Update[764]: Acquired Lock: 501, 754, 0
Dec 17 11:47:58 Mihirs-MacBook-Pro installd[760]: PackageKit: ----- Begin install -----
Dec 17 11:47:58 Mihirs-MacBook-Pro installd[760]: PackageKit: request=PKInstallRequest <5 packages, destination=/>
Dec 17 11:47:58 Mihirs-MacBook-Pro installd[760]: PackageKit: packages=(
     "PKLeopardPackage <file://localhost/Library/Updates/zzzz031-08056/iTunesX.pkg>",
     "PKLeopardPackage <file://localhost/Library/Updates/zzzz031-08056/iTunesAccess.pkg>",
     "PKLeopardPackage <file://localhost/Library/Updates/zzzz031-08056/CoreFP.pkg>",
     "PKLeopardPackage <file://localhost/Library/Updates/zzzz031-08056/CoreADI.pkg>",
     "PKLeopardPackage <file://localhost/Library/Updates/zzzz031-08056/MobileDevice.pkg>"
Dec 17 11:48:00 Mihirs-MacBook-Pro installd[760]: PackageKit: Will do receipt-based obsoleting for package identifier com.apple.pkg.iTunesX (prefix path=/)
Dec 17 11:48:01 Mihirs-MacBook-Pro installd[760]: PackageKit: Will do receipt-based obsoleting for package identifier com.apple.pkg.iTunesAccess (prefix path=/)
Dec 17 11:48:01 Mihirs-MacBook-Pro installd[760]: PackageKit: Will do receipt-based obsoleting for package identifier com.apple.pkg.CoreFP (prefix path=/)
Dec 17 11:48:01 Mihirs-MacBook-Pro installd[760]: PackageKit: Will do receipt-based obsoleting for package identifier com.apple.pkg.CoreADI (prefix path=/)
Dec 17 11:48:01 Mihirs-MacBook-Pro installd[760]: PackageKit: Will do receipt-based obsoleting for package identifier com.apple.pkg.MobileDevice (prefix path=/)
Dec 17 11:48:05 Mihirs-MacBook-Pro installd[760]: PackageKit: Extracting file://localhost/Library/Updates/zzzz031-08056/iTunesX.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, uid=0)
Dec 17 11:48:25 Mihirs-MacBook-Pro installd[760]: PackageKit: Extracting file://localhost/Library/Updates/zzzz031-08056/iTunesAccess.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, uid=0)
Dec 17 11:48:25 Mihirs-MacBook-Pro installd[760]: PackageKit: Extracting file://localhost/Library/Updates/zzzz031-08056/CoreFP.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, uid=0)
Dec 17 11:48:28 Mihirs-MacBook-Pro installd[760]: PackageKit: Extracting file://localhost/Library/Updates/zzzz031-08056/CoreADI.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, uid=0)
Dec 17 11:48:29 Mihirs-MacBook-Pro installd[760]: PackageKit: Extracting file://localhost/Library/Updates/zzzz031-08056/MobileDevice.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, uid=0)
Dec 17 11:48:30 Mihirs-MacBook-Pro installd[760]: PackageKit: update_dyld_shared_cache -overlay /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root
Dec 17 11:49:16 Mihirs-MacBook-Pro installd[760]: PackageKit: xpchelper --rebuild-cache --overlay /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root
Dec 17 11:49:26 Mihirs-MacBook-Pro installd[760]: PackageKit: Executing script "preinstall" in /private/tmp/PKInstallSandbox.3wcfFc/Scripts/com.apple.pkg.iTunesX.ClCbhl
Dec 17 11:49:37 Mihirs-MacBook-Pro installd[760]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=112 "An error occurred while running scripts from the package “iTunesX.pkg”." UserInfo=0x7f9a026b5130 {NSFilePath=preinstall, NSURL=file://localhost/Library/Updates/zzzz031-08056/iTunesX.pkg, PKInstallPackageIdentifier=com.apple.pkg.iTunesX, NSLocalizedDescription=An error occurred while running scripts from the package “iTunesX.pkg”.} {
     NSFilePath = preinstall;
     NSLocalizedDescription = "An error occurred while running scripts from the package \U201ciTunesX.pkg\U201d.";
     NSURL = "file://localhost/Library/Updates/zzzz031-08056/iTunesX.pkg";
     PKInstallPackageIdentifier = "com.apple.pkg.iTunesX";
Dec 17 11:49:38 Mihirs-MacBook-Pro Software Update[764]: Releasing Lock: 501, 754, 0
Dec 17 11:49:38 Mihirs-MacBook-Pro Software Update[754]: Error: An error occurred while running scripts from the package “iTunesX.pkg”. (PKInstallErrorDomain code 112)
I also tried suggestions provided in other forum: Troubleshooting iTunes installation on Mac OS X - Apple Support
I downloaded dmg file from thelink provided and followed the steps. It still gives an error.
Error as below:
The installation failed.
The install encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
Please help.
Please help to get iTunes install.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Trying to Download IOS Update via ITunes

Hi.....I have an IPhone 4. Im not able to download the most recent IOS7.0.6 update via wireless and am trying to update via ITunes.Phone is plugged in to PC. I have verified that I have the latest version of ITunes. However, when I go to file-devices, Backup is greyed out and the only option is "Restore from Backup". What am I doing wrong??

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

How to update to itunes 11.1

how do I update my itunes to 11.1? do I have to download Itunes again or is there just an update?

You have to have 11.1 to run iOS7. WHen my 11.1 download failed, I tried to update my iPad anyway, which triggered a dialogue to download iTUnes, which did work. Then I could download and install iOS7.
Unfortunately the release of iOS7 and iTunes 11.1 on the same day created a 'perfect storm' of just too much demand and too little bandwidth.

I did an auto-update on itunes today and now itunes is unresponsive..it gives this error "An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information."

I did an auto-update on itunes today and now itunes is unresponsive..it gives this error "An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information."
Wouldn't apple check before releasing new version, I see so many people with same issue..its such a waste of time for everyone now to fix it.
Is there any other way to fix before I try to un-install everything and re-install back?

Hello iTunes_Bad_Update,
The following article provides information and troubleshooting steps that can help get iTunes back up and running.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen

After updating to itunes 10 i now get an error message saying there is a problem with the windows insaller package - I have tried all the suggestions but nothing works for me - have I lost all my itunes forever?

After updating to itunes 10 I now get an error message that says there is a problem with the windows installer package. I have tried all the things that others suggested but cannot download itunes at all now. Have I lost itunes forever?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) (not for XP) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

2.1 Update on Itunes?

I just logged on to iTunes and it updated a 2.1 file and had me restart my computer. I then checked for updates and it now updated my iTunes, Quicktime and Safari. I am not able to sync my iPhone because I am at work. Has anyone tried syncing their phone and seeing if a 2.1 update has been released? Maybe I'm just seeing things but I know for sure I saw 2.1 on my screen.

I think that was a "Apple Software Update" update. That is, they updated the updater app.
Did that make sense?
Anyway, you will know when the iPhone gets updated. For one you don't restart your computer after an iPhone update....

Slower MBP since 10.5.4 Most Recent Security Update and iTunes 7.7.1(1)

Anyone notice a significant overall slowdown since installing updates to iTunes and the Security Updates that were released recently? My MBP is an Intel Core 2 Duo 2.3GHz with 4GB of memory; it should blaze, and used to, but not anymore. Very noticeable slowdown overall!

After update 10.5.2 there has been performance issues on my MBP as well.
Response performance varies - like your laptop is becoming tired..................
Unfortunately, general freezing of the screen and all control (except power down), happens randomly - I read in another post that this only happens on Battery? - I believe this to be true...........
Longer app loading times and annoyances from spotlight indexing at poor times.
Window memory and size are lost on occasion - having to resize all quite often - crazy.
Dock unhide judder from first mouse activation - I know it's petty, but I think the Dock is worth it.
Sometimes, bootcamp partition desktop icon fails to appear with the other desktop icons, later after spotlight has calmed down.
The last bug is usually a sign to run Onyx maintenance and rebuild spotlight and other preferences.
Great program.
This usually sorts it out for a week and then the symptoms come back.
Logic Pro seems to take more RAM (I know i need to upgrade - only 3Gb available on my machine - nuts.)
Still a very cool machine though - BF2 and Logic on one laptop.............
Any positive ideas and solutions are welcome.

Update to itunes 9.1 - All contacts are missing after syncing iphone 3G

I have updated Mac OS and itunes to the latest versions and synced my iphone as everytime. As I started my navigation app during car driving I noted that *all my stored contacts do not exist anymore*. It seems that the last sync has deleted my whole contacts library on my phone. Only the empty distribution lists are available. My contact folder in the address book of my mac are still existing. But neither a iphone reset nor the replacement action for contacts in itunes are working to solve the problem.
I hope the itunes-team is working on a bugfix. It is not acceptable, that a s/w-update is not tested enough before being released to the community.
Please give a message how the further plan is. Thx. Axel

I just had the same problem on my Windows 7 PC.
I updated to iTunes 9.1 a few days prior. On 4/19, I plugged my iPhone 3G into my Windows 7 laptop to charge it, didnt touch anything on the phone or the laptop, and went to sleep. The next morning I grabbed my phone and went to work. I noticed that all of my contacts had been deleted off my phone. I then went home that night and looked at my laptop, which I had not used since before I plugged in my iPhone. All of my contacts have been deleted off my laptop as well. I tried doing a system restore on my laptop to see if it would restore my windows contacts. No luck. I also did the system restore to see if it would bring up an earlier version of an iphone backup, as itunes automatically backed up my phone when i reconnected it, so my contacts were no longer on there as well.
Please help!

Downloading updates without iTunes?

Is there a way to download iPod Updates without iTunes? Here's my problem. I have an iPod that is locked up at work and need to restore it. When I try to restore it, iTunes tells me there is new software available for my iPod. The problem is that I'm using my cell phone to get online and it would take 6 hours to download the update and I don't have broadband access at work. I would like to download the update at home, take it in to work, and then be able to restore it successfully.
Thanks in advance.

The iPod Updater has been integrated with iTunes since the release of version 7. There's no longer a standalone updater you can download to deliver the latest updates so you need to be able to use iTunes if you want to update the iPod

TS1538 The device do not show at the itune after update at itune

How to solve the device do not show at the itune after the update thru itune.
Now the ipad mini keep show the screen on "USB syr to itune"

Try and turn off iPad and proceed to step 3 of Recovery Mode.
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

How do you disable iPod Auto Update with iTunes?

How do you disable iPod Auto Update with iTunes? I know there is a key press combo that will do it but I forget which keys. Anyone?
Intel Piii Windows XP Pro

Keep iTunes from automatically updating your iPod
Another Easier Alternative:
While connecting the iPod to the computer, hold down the Shift + Ctrl keys in Windows (CMD + Option keys on a Mac). This will stop the iPod from auto-syncing with iTunes. The iPod will then appear in the iTunes source list. Wait until you are sure the iPod has mounted, and that it will not auto-sync and then you can release the keys. This action may take between 3 and 25 seconds depending on your computer.
You can then ‘right-click‘ on the iPod icon in iTunes’ source column and select iPod Options, then check the box that says “Manually manage songs and playlists”. You can now manage your library without losing any songs on the iPod.
Note: If connecting to a different computer than the ‘iPod’s Home Computer’, iTunes will ask you if you want to update your iPod and give you an opportunity to opt out. This will not happen if you connect to the ‘Home’ computer – iTunes will auto-sync without warning!. Best to know the difference.

Update to iTunes released

Similar Messages

Maybe you are looking for