Update to leopard with a PowerBook G4 (intel-based)

hello
i have a PowerBook (in about this mac it says in the header PowerBook G4 and under Modellname MacBook 2.1). this mac at the moments runs under OS 10.4.11. Is it possible to update this mac to either Snow Leopard or Lion - if yes, how? i tried it with a Leopard install disc to do it step by step - didn't work. any ideas?
best

Well, I don't know where the PowerBook bit's coming from, but if it's genuinely a MacBook 2.1 there should be no problem going to Snow Leopard.
You say you tried installing Leopard - with what disc? If you borrowed the disc from another computer (grey disc), it won't work on anything other than the computer it came with.
To go to SL it's only necessary to get the retail SL installer (c. €30) from the Apple Store or Amazon.
You won't be able to go to Lion with a Core Duo, though; that requires at least a Core 2 Duo.
Message was edited by: noondaywitch

Similar Messages

Updating Snow Leopard Server Software on Dual Intel Mac Mini

I have a 2009 Mac Mini Dual Core 2.53 Intel with 4 gb Ram running as a server under 10.6.8 Max OSX Server.
But I have never used the server capabilities and don't reallyneed them.
The Boss, Wife, wants ITunes radio on it, but it won't work apparently unless you run 10.9.
I tried updating to 10.9 server, but it wouldn't downlaod because the downloader said it needed to run under OSX 10.9.
I am trying to download Mavericks to see if it'll install, but I'm guessing the server level security won't let it.
How can I update to OSX 10.9 Server to basically keep her system as "same" as possible...so ITunes radio will work on it for her?
Is there an easy way other than copy as much as possible to another HD, reformat the entire original Mini HD and start from scratch?
I don't know if I can install another OS on it's second internal HD and just boot up from that one..since I think the server systen may not allow multiple boot drives?
Is there an easy solution to updateing Snow Leopard Server to Mavericks?

Help appreciated Greatly.
I downloaded Mavericks with no problem and held my breath to see if it would install OK.
It did.
No major issues and just about everything is working OK right out of the box.
Transition from Snow Leopard Server to OSX Mavericks Single User OS went fine.
Donlt have to worry about archane "Server Language" anymore and administerring this computer will be much easier.
Hope it's a stable build.

Unable to achieve Gigabit speeds with onboard NIC (iMAC Intel based)

Hi,
I've recently noticed that my iMAC's built in 10/100/1000 NIC is only negotiating up to 100mb. I have a direct (cat5e straight through) connection from the iMAC to a 10/100/1000 port on an Airport Extreme Base station.
I've tried several different (known good) straight through ethernet cables and I either get NO link or at most 100mb. I'm starting to think that the NIC might be flaky of failing because during a few tests with different cables, I got link after a very long delay. Close to a minute or more after plugging in the cable.
Before I call Apple tech support, I figured I'd check the forum to see if this is a known issue or if anyone else has seen this.
- Some more specs of my system....
20" iMAC (Intel based)
3 gig DRAM
OS 10.5.2
Thanks...

I'm seeing (within the Network Utility) when I select the onboard ethernet adapter that the speed is 100mb.
I've been trusting this output mainly because if I leave the Network Utility screen open and unplug or re-plug the cable back in, the speed <value> disappears and then re-appears once the speed (I'm assuming) has been negotiated.
Additionally, I've just checked the Network Utility on my Powerbook G4 (here at work), and it shows the wired ethernet speed to be (1G) as opposed to (100mb). I can think of no logical reason why my iMAC's ethernet port would be negotiating to 100mb unless either the NIC is truly flaky or the AEBS needs to somehow be configured accordingly.
Thanks. Let me know if you have any other thoughts..

Update to leopard with lion

I'm on lion now, but beause lion misses iweb and idvd and so on i'd like to 'up'date to leopard. Is this possible?
I really want iweb but don't know how to go about this..
Please help!
thanks

Visit the Apple Store and purchase the DVD version of iLife '11. It includes iWeb and iDVD and both work just fine in Lion.
Installing an older OS will not install the iLife apps. They are a seperate purchase.

Printer cpmatibility with Intel-based Imac

I have an Epson CX4100 All-in-one printer, but I cannot make it work with my new Imac (intel-based) I have downloaded new drivers, but still the printer doesn`t appear in my drivers list. Anyone that can help?
Also if you know if a Brother DCP-130C would be compatible with Imac Inter-based?
Thanks
IMAC Intel Mac OS X (10.4.8)

U.S. websites for those companies don't show those models on their product lists or at support. If your iMac recognizes your printer, don't worry about the driver, it's there.

Intel based Mac Issues?

The previous version of Flash Pro 8 had issues with being run
on Intel based Macs. Have those issues been resolved with the new
CS3 version of Flash? Thanks.

check out the system req:
http://www.adobe.com/products/flash/systemreqs/
You didnt specify the "issues" but I assume since Flash 8 was
shipped pre-intel macs - CS3 has at
least thought about them :)
Chris Georgenes
Animator
http://www.mudbubble.com
http://www.keyframer.com
Adobe Community Expert
*\^^/*
(OO)
<---->
SmilinMelvin wrote:
> The previous version of Flash Pro 8 had issues with
being run on Intel based Macs. Have those issues been resolved with
the new CS3 version of Flash? Thanks.
>

I am looking to update to a new imac with intel core processor. I am still old school with a powerbook G4. I want to know if I am going to have to upgrade all graphic programs right away after buying new computer. Thanks.

I am looking to update to a new imac with intel core processor. I am still old school with a powerbook G4:)
I want to know if I am going to have to upgrade all graphic programs right away after buying new computer.
Trying to weigh ALL costs involved.
Thanks for any advice!!!

Anything you have that is powerpc code only will not run on a new machine. OS X 10.8 has no support for powerpc code (universal binary programs should be fine).
Other than that warning, without knowing exactly what programs you have, and what version you are on, it is hard to say whay will or will not migrate alright.
you might need to do some web searching and check apps at sites like roaringapps or on the programs Company web site.
http://roaringapps.com/apps:table

How do I update my iMAC with Intel chips beyond 10.4.11 ?

From the days of the Apple 1 until the days of the first Mac I was an Apple user. Then corporate America drug me away kicking and screaming to the Windows world. Now I have bought a used iMac with Intel chips to use as an Apple Forensics test machine. However, I need to update it as far as I can go and can't seem to locate the information on the net/ Do I need to go to Amazon and get a disc?
This iMac has served to remind me just how great Apples are. Can not wait to retre!
Thank you.
Mike

Upgrading to Snow Leopard, Lion, or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s MobileMe service; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer)
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
         3. MacBook Pro (Mid/Late 2007 or newer)
         4. MacBook Air (Late 2008 or newer)
         5. Mac mini (Early 2009 or newer)
         6. Mac Pro (Early 2008 or newer)
         7. Xserve (Early 2009)
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     Am I eligible for the free upgrade?
         See Apple - Free OS X Mountain Lion upgrade Program.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

What video chat is supported with the PowerBook G4(leopard) PPC 10.5.8 Plz help!!

What video Chat is supported with the PowerBook G4 (leopard) PPC 10.5.8 plz help

iChat works with AOL and ICQ. Note if you get ahold of an original Firewire iSight, those work well with iBook G3s, iBook G4s, iMac G3s, G4s, Powermac G4s and Powerbook G4s to the following limitations
http://web.archive.org/web/20050301024002/http://www.apple.com/isight/
ISPq is another
http://www.ispq.com/
and they may be able to recommend some webcams that were available for those older Macs. This statement about the built-in iSight only applies if you have a second machine other than the Powerbook G4. If your machine has a built-in iSight like the later iMac G5s, and iMac Intel, MacBook, MacBook Air, or MacBook Pro, all you need is an AOL account to hook up to video chat via iChat software pre bundled with your Mac. Newer Intel Macs may support video chat with Windows machines more easily thanks to their ability to virtualize Windows. If your friends have MSN, or Netmeeting, that gets a little more hairy with PowerPC Macs, but not necessarily impossible as http://homepage.mac.com/john_kenn/video.html explains.

Problem with networking HP Laserjet 1100 with Leopard with new Intel iMac

I have an HP Laserjet 1100 that I have used with my old iMac running Panther. I had used the HPIJS drivers in the past with the HP Laserjet 5 driver selected. It worked flawlessly. I use IPP to connect to the printer via a printer server.
I have purchased a new iMac which is Intel based and runs Leopard. I am having a lot of trouble getting this printer to work with it. I went to the website referenced above and installed Ghostscript, Foomatic RIP and then finally HPIJS. As I add the printer, it gave me the option to select an HP Laserjet 1100 printer (from the HPIJS set). When I add the IP address, it says it is valid. When I try to print, there is no response; the job just times out. I had the same problem with the Gutenprint driver that was installed with Leopard.
Finally, I tried the HP Laserjet 6 from the HPIJS driver set. It had the word "recommended" next to it which was intriguing. It too did not work.
I would appreciate any help.
Steve Kirchner

I'm afraid that Ghostscript, etc. are PPC only applications and any printer plug-ins they install will not work on an Intel Mac. You should uninstall all the third-party stuff you've installed for the printer, then only use the included printer driver installed by OS X unless HP has a universal binary driver compatible with OS X and Intel Macs. You might try using LPD rather than IPP for the printer.

Just done a fresh install of Snow Leopard with all updates,iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately, I believe its related to overheating ?

Just done a replacement of the pata DVD drive (its new and is working ok), and a fresh clean install of Snow Leopard with all updates, iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately,
I believe its related to overheating ?
iStat Pro shows GPU diode temp at 66 C, CPU at 48 C, Fan rpms is around 1000
Any ideas somebody ?
The hard disk has been previously checked with state of the art techniques that have confirmed that the hard disk drive is in perfect condition.

1.5-3 minute boot up as opposed to 15-20 seconds
And
why it takes a long time to load a lot of things.
I have restored this
from a time machine partition.
TimeMachine is only a backup and restore, it won't fix issues in software and according to your information, doesn't even optimize the restore for best performance on boot hard drives.
What you need to do to regain your speed is to understand how your machine works
Why is my computer slow?
Fix any and all issues in software following this list of fixes
..Step by Step to fix your Mac
Then follow this defrag method I've outlined
How to safely defrag a Mac's hard drive
Most commonly used backup methods
There shouldn't be need to reinstall OS X fresh unless your having file structure issues which if they are should appear when in the Steps, which then a zero erase and install will cure as well as any bad sector issues, the defrag step wouldn't be necessarry on a freshly installed system obviously as the files are written all together, not in portions all over the drive.
Hope this assists.

I have upgraded Snow Leopard with Combo 10.6.8, the supplemental update and fixed permissions, but still can't open app store to upgrade to Mountain Lion. I am on the Cayman Islands. Thanks for the help!

I have upgraded Snow Leopard with Combo 10.6.8, the supplemental update and fixed permissions, but still can't open app store to upgrade to Mountain Lion. I am on the Cayman Islands. Thanks for the help!

Don't be afraid to bump this topic. There's also an App Store forum where you might repost this question, but give some of these details in your post. I'd rephrase the topic to something like "Can't use App Store to upgrade." (Instead of can't "open".) Then give the details.
https://discussions.apple.com/community/mac_app_store/using_mac_apple_store

Troubleshooting with update snow leopard - mini mac

Hi,
I have a troubleshooting during upgrade snow leopard in mini mac.
I see white screen, I haven't access to menu mac os, just a white screen.
If somebody have idea of solution, thank you for our help
JN2E

Are you by chance using an Iogear or othe usb / firewire hub? I'm having a similar problem and I think it may be caused by this device. Try unplugging any usb hubs from your machine and see if the machine boots up. I have a feeling these hubs need an update to work with Snow Leopard.

In attempting to install recommended software updates I get a message saying my startup disc is full. I have an Intel-based desktop with 1GB memory. What can I safely remove?

In attempting to install recommended software updates I get a message that my startup disc is full. I have an iMac (intel-based) with 1GB memory. I suspect my iTunes library is using up much of the space (I have no movies installed and have already copied most of my photos to a DVD to free up space). If I follow the instructions to move my iTunes library to an external HD (can I use a flash drive?) will I have enough working memory to plug it back in for use when I want to access the library?

Welcome to Apple Discussions!
Moving libraries off the boot disk while doable is not very viable. It creates many new problems in backing up your data, as now you have more than one source to backup. See my backup FAQ*:
http://www.macmaps.com/backup.html
My suggestion is to get at least two copies of all your essential data in one manner or another, and get a larger boot hard drive to replace what you currently use to be able to consolidate your libraries.
As for cleaning space, see my FAQ*:
http://www.macmaps.com/diskfull.html

HT1444 I have recently acquired an update for my mac OX the program being the snow leopard, i have been forever inserting the disk only to have it ejected by my mac, hence, i am unable to update my system with snow leopard

I have recently acquired an update for my mac OX the program being the snow leopard, i have been forever inserting the disk only to have it ejected by my mac, hence, i am unable to update my system with snow leopard, what can i do, as i have just paid out money for something which

Worked like a charm and resolved my problem totally. The only issue I had is that, unlike the Computer (Mac OS). the iPad doesn't give constant visibility to what it is doing (feedback), so I wasn't initially sure it had done anything.
When I opened my emailed message with .vcf file attached, and tapped the .vcf attachment icon, I saw activity on the icon for just a few seconds, then it reverted to the original with nothing apparently happening. After about 30 seconds, the secondary menut popped up indicating the transfer of 1200 addresses would be completed, if I approved the action. Another 10 to 15 seconds then transpired before the completed Contact list appeared on the ipad. So you must be patient, if you have a large Addressbook. That's reasonable,but unexpected lack of feedback left me wondering, like so many other things on the iPad.
THank you for the assist. Apparently Apples Mac Genius people did not know this procedure, and I will pass it on to my local Apple Store Instructor.
-- Chuck

Update to leopard with a PowerBook G4 (intel-based)

Similar Messages

Maybe you are looking for