Update to Premiere Pro 8.1 not available.

When I check the update options, Cretive Cloud says that my version is up to date and yet, I only have version 8.01 (21) build installed. Any suggestions? I have alos tried the updates section in Premiere itself and the same thing.

Hi Speedy,
If it helps, you can also get and apply all the CC 2014 updates directly using the download links for Windows here or for Mac here, for all apps.

Similar Messages

Downloading Premiere Pro after buying not available in Desktop APP

I bougt on the 7th of september 2014 an one year membership for premiere pro.
I paid and the bill with my bank acount.
Till today i can`t download premiere pro with the desktop app for CC
All other adobe products are available including photoshop for that i also habe a 1 year membership.
so my question: Why can I not download premiere pro to my desktop?
thanks for your help!

The interface normally only lists applications for which your system meets the requirements. Check the system requirements for Premiere Pro and see if the machine comes up short on any of them.
Premiere Pro - http://helpx.adobe.com/premiere-pro/system-requirements.html

PreludeCC and PRemiere Pro CC will not update error: " log Transport 2"

PreludeCC and PRemiere Pro CC will not update . update gets to 62% and then quits with the following error code "Log Transport 2"
System
OS 10.9
MacPro 3,1
All other apps do update.

HI Steve & Perry,
Have you tried restarting the machine and applying the updates again ? If yes, are you still getting the same error message ? If yes , could you please share a screen shot of the error that you get ?
Cheers,
Kartikay Sharma

Cannot install update on Premiere Pro cc

2 days ago i've bnee noticed of new Premiere Pro cc update. Tryed to install but fails: gives me an error istalling the patch.
Then unistalled Premiere Pro Cc and just installed again, but got the same problem. The system is able to install Premiere Pro cc but not the patch.
The additonal problem is that the version of Premiere Pro CC i've been installed now seems to be eralier than the one i had before. So it cannot open my most recent project. I'm in big troubles!!!!
I got Premiere Pro Cc in spring and months ago i already have installed a previous update without any problem. It seems that the actual Premiere Pro CC version i can download is the oler one without that update.
Help me please.

The error i receive is : U44M1I210

Problem update Adobe Premiere Pro CC(2014)

Hello,
when I try to update Adobe Premiere Pro CC 2014 the system give me this error "Unable to extract the downloaded files. To download please selected try again. (U44M1L210)
Nicolò

We can't know anything. You have not provided any system info or the detailed error report from the "Learn more/ More info" link.
Mylenium

Premiere Pro CS6 does not recognize USB PnP Sound device connected to iMac OSX even when activated in Audio MIDI setup. The iMac(i-7 processor,16 GB) is working with this USB device without any problem

Premiere Pro CS6 does not recognize the USB PnP Sound device in order to produce a commentary sound track. The USB device has been activated on the iMac OSX by using the Audio-MIDI-setup and is working correctly with the iMac. When opening > presets >audio hardware I can only select between >standard >out integrated > digital input integrated >microphone integrated. USB PnP is not indicated at this place.
With the built-in microphone of the iMac I can produce the commentary sound track, but I would prefer a stand alone version for better quality.
Your help is highly appreciated. Thanks in advance, Annemarie!

I'm using a Logitech Webcam Pro 9000 (which has a microphone on the side). I have several other devices plugged into separate USB slots: a keyboard, a mouse, my iPhone, and a Roland keyboard midi controller.
I've considered that maybe the webcam/mic combo is the culprit. If USB doesn't work at a constant speed, that could very well be causing the issue! The sound begins to lag badly sometimes when it's working properly, so that there's a multisecond delay between speaking and hearing my voice repeated back over the mic which is another sign that something is wrong. I've also caught it making a strange electronic sound during its "hang" time once it stops taking sound input correctly.
Maybe I should try to use line-in and forgo USB altogether then. I think I'd need a preamp and some sort of converter for that since the Mac Mini lacks a powered mic jack. I'm only a newbie musician so I've never set up such a system but it might be a better solution in the long run.
I'll check to see if it hangs before or after my computer enters suspend mode, that's a good suggestion too. Thank you for your help!

Dvd burned in premiere pro cc does not fill the screen. Desire a 4:3 aspect ratio

I am using premiere pro cc. I burned a dvd several times,trying different presets. On each occasion the dvd never fills the screen. It does not lool like letterbox ( 16 x 9 ). There is space all around the picture / video. Need assistance fast,project is already late.Thanks in advance.
Theo Smith

I sent the screenshot via an e-mail attachment. I wasn't aware that
attachments could not be forwarded this way. I will send it again. First time
I've utilized this service.
In a message dated 3/8/2015 10:15:23 A.M. Eastern Daylight Time,
[email protected] writes:
Dvd burned in premiere pro cc does not fill the screen. Desire a 4:3
aspect ratio
created by Peru Bob (https://forums.adobe.com/people/Peru+Bob) in Adobe
Media Encoder (AME) - View the full discussion
(https://forums.adobe.com/message/7264779#7264779)

I just updated to Premiere Pro CC 2014 and it can't start up

I just updated to Premiere Pro CC 2014, and now I am seeing an error message saying it cannot find any capable play modules. I updated the driver for my graphics card (Firepro), and tried running as administrator with no change. I am running amd fire pro control center which doesn't have the speed settings that is suggested for this problem. For some reason, the original Premiere Pro CC can still open (luckily). I looked up this problem on the on the support page, and it is listed, but when I click the link it redirects me to the start of the troubleshooting questions. I hope there is an answer to let me use the latest version of Premiere!
[moving to Premiere Pro... JTS]

Same here! Screen shot attached. I'm running the latest MBP with max specs. Anybody there @ Adobe.......?
***UPDATE*** - it's pretty easy to fix yourself. Just follow these helpful instruction on Creative Cow: Re: CC 2014 startup issues : Adobe Premiere Pro

Why won't premiere pro cc will not let me add an adjustment layer

why won't premiere pro cc will not let me add an adjustment layer

Glad that you got the adjustment layer issue worked out. Not quite enough info to troubleshoot the other problems. The following page outlines the kind of info that helps zero in on the cause of such problems: FAQ: What information should I provide when asking a question on this forum?
As to the cache files and rendered previews, you do not need to keep them. Premiere will regenerate them as needed. Because re-conforming the audio and re-rendering the sequence takes time, you probably want to keep those files around for the current project--unless, of course, you have reason to think that the cache or render files are causing problems.
To keep things clean and get the attention of more people, it would probably be best to start a new thread for the other issues.

Macbook Pro bluetooth is not available

Recently my MacBook Pro bluetooth became not available and I cant do any thing about it. Can anyone help me in this case ?

HellO:
Try resetting the PRAM and SMC.
Barry

MPEG2 Low Quality Render in Premiere Pro CC, but not CS6

Any MPEG2 i render in Premiere Pro CC exports in low quality (Grainy and flickers). Even at 1080p and a CBR of 20. I thought i'd wait for the next update for premiere pro CC which came out today with no luck.
I found a similar article, but no respones or feedback.
http://forums.adobe.com/thread/1255444
Is anyone else having this problem?
Can anyone help? It's driving me crazy!
24GB of RAM
i7 X990 Processor
NVIDIA Quardro 4000
Windows 8.1

I have CC and CS6 loaded on Windows 8.1. Send me the source of that screen grab, video or graphic, and I'll see what happens here.
https://depositfiles.com/uploader_flash.html

Why is the Nvidia GTX 680 CUDA card supported by Premiere Pro CC, and NOT After Effects CC?

Why is the Nvidia GTX 680 CUDA card supported by Premiere Pro CC, and NOT After Effects CC?

Thanks Todd for all the info. It is much appreciated and very helpful. On a different note, could you possibly direct me to the correct forum to fix this bug? I am suddenly recieving a warning on my System SSD referencing Adobe Exchange. Here is a screen grab to best explain:

Borderless printing with hp pro 8500A is not available

selection for borderless printing with hp pro 8500A is not available. How can I get the selection to turn on in order to print an envelope? As is, I have to print the return address well inside the margins. Thanks for your help.

Hi folks
Have you followed the troubleshooting in the link below?
Troubleshooting print quality issues
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

After Affects CS6 comp do not update in Premiere Pro sequence

Since CS6, if I change an After Effects project when the comp is already in a Premiere Pro timeline, the comp won't automatically update on the timeline, but it will update on the source monitor.

I'm having a similar problem. I have 2 Mac Pro machines that have recently been updated to CS6(Production Premium). This occurs on both machines. And is not specific to any one item being changed. It occurs to any changes being made AFTER rendering into PPro.
If I link between PPro & AE comps/sequence, I can make changes in AE and it will update to PPro as long as it has not been rendered. However, if I render the sequence in PPro, and then go back to AE and make changes(and yes, I am saving it before returning to PPro), it does not unrender the PPro sequence, and will not update. It remains rendered in the sequence as if nothing has changed. No matter what I do to the imported AE comp in PPro, it will not unrender. (short of adding an adjustment layer with an effect above it all in the sequence to force it to unrender - this is my workaround for the moment).
I've gone so far as to delete the linked comp out of PPro, and re-import the AE comp, and if I drop it on the same sequence it pops immediately back up as rendered. My guess is it has something to do with the global cache.
This is not a legacy issue, as this project was created from scratch in CS6.
Here's the workflow
Create PPro Proj -> import footage -> edit video -> save.
Create AE Project -> edit composition to desired effect/graphics etc... -> import or drag comp from AE to PPro -> Lay AE comp on video layer above base footage -> Go back to AE make any desired changes and Save -> return to PPro, and project is updated -> Render ALL in PPro -> realize something needs to be adjusted in AE -> go to comp in AE, make adjustment & save -> return to PPro and find that it will not update/refresh/unrender.
I can duplicate this exactly on the other machine as well, so it's not a specific issue with a specific machine.
Am I missing something short of clearing out the entire render folder in PPro?

Premiere Pro/Prelude CS6 not working with AVCHD from Canon HF G10

I just tried switching from Final Cut Pro 7/X to Adobe Premiere Pro CS6 and have not been able to get Premiere Pro or Prelude to work with AVCHD footage from my Canon HF G10. The system runs Mac OS X 10.7.4 on a 3.4 GHz quad-core iMac with 16GB of RAM and 10Gbit/s Thunderbolt RAID for video storage. Adobe Updater ran yesterday and installed CSXS infrastructure updates which did not fix the problems.
After importing several short (less than 5 minutes each) 1080p30 clips into Premiere Pro, I can scrub over the first few seconds of a clip but afterwards it stalls or mixes in frames from the beginning of the clip. Rendering 30 seconds of video does not complete in reasonable time, i.e. takes more than 5 minutes. I figured I would try ingest the footage with Prelude and am running into the same problems. Scrubbing does not work, only the first few seconds from a clip are available. When configuring Prelude to transcode on ingest, I am getting "Import XMP failed" errors. I already spent several hours trying to figure this out. In the meantime, I finished the project using Final Cut Pro X :-\
Any help would be appreciated.
Thank you,
Niels.

Any chance this gets fixed soon? I'm shooting with an AF-100, and at this point I'm still using Final Cut to transcode my footage so I can have audio. I've also noticed the video jumps around even when it does have audio. Prelude has been extremely problematic for me, and it doesn't have a way to bring in clips that returned errors upon importing, I have to write down the clip numbers and bring them in individually. I've also tried just dropping the file structure from the card straight to the hard drive. It's a huge problem, and is keeping me from making the switch fully from FCP 7.

Update to Premiere Pro 8.1 not available.

Similar Messages

Maybe you are looking for