Update TOC, with .eps files connected in the same TOC

HI,
I want to update TOC, and i am unable to do it as .eps files are followed by main TOC.
if the TOC is already created - which file to be added to pragraph tag in add table of content dailogue box. How to recongize which paragph tags were previously tagged in TOC.
Now if i click add TOC> there is nothing on the left side of TOC but create hypertext linkz is checked, still TOC is not working.
When i press ALT+Ctrl click on the topic , no finger pointer appears..
please provide me a solution for this.
Thanks,

Hi
I have Two questions :-
1.) I have created a TOC and I want the links to work for whole heading tag, but now the links work only for the page numbers.
How to update TOC with links to heading as well as page numbers.
2. ) Apart rfom this,how to identify which paragraph tag is to be included for the previously generated TOC. Becuase when i try to open this TOC i could not find any paragph tags shown in TOC. how to recongizes which paragraph tags were used to create Table of content for the manual created by others.
below is the image of TOC when i try to add TOC..

Similar Messages

Anyone knows the maximum amount of simultaneous file connection (for the same file) for:

a) READ
and
b) READ / WRITE for both SERVER2008R2 A N D SERVER 2012 ?
Thanks
[email protected]

I belive you should look for any limitations in current tcp connections, and not specificly for the file service it self.
I think you will reach the capacity of what the storage can provide, which most likely will result in read/write timeouts, before you reach the maximum number of current tcp connections.
Best Regards,
Jesper Vindum, Denmark
Systems Administrator
Help the forum: Monitor(alert) your threads and vote helpful replies or mark them as answer, if it helps solving your problem.

Updated ipad2 with new os half through the restore it tells me to enter a backup file password.. I never set one??

updated ipad2 with new os half through the restore it tells me to enter a backup file password.. I never set one??

Have you encrypted the backups files from your iPad? If so, that is likely the password needed.

Very slow working with eps files over new network

Please help!!!
Our IT has recently upgraded us from a OSX server to a 2 Terabyte SNAP SERVER 520.
I am using the only INTEL Mac in the department (we have another 10+ G5 PPCs running 10.4), and the only one using OSX 10.5. Since changing to the new server, I am also the only one with several file saving/opening issues.
I believe this is a network issue.
It is with mostly ADOBE products and we all know they will not support, working over the network. Due to the volume of files, I simply cannot drag files to my HD, and work locally. It is not practical. I also know that we have not had any issues in the past, and don't see why I can't get to the root of the problem.
**The most obvious issue is Illustrator .eps files.**
I can open and save .ai files in good time both locally, and over the network. There is no difference either way. HOWEVER, if it is an .eps file working over the network is not practical. I get the spinning wheel for about 2 minutes each time I open, save, or make a change. It is VERY slow. Working on eps files locally is fine (about the same speed as .ai files), but as soon as it hits the server, it is painfully slow to do anything.
Additionally, when saving Photoshop, Illustrator, InDesign AND Quark 7 files (direct to the network), I am regularly getting "Could not save because write access was not granted", or "Could not save becasue unexpected end-of-file was encountered", or "Could not save because the file is already in use or as left open" type errors.
I simply then click 'OK', and then hit save again, and it either gives me the same message, or it goes into 'save as' mode which lets me save the file (same name, and same location, but the original file has disappeared).
I am connected to the server IP address through afp:// but have also tried cifs://. IT have removed all access to the server through smb://, so I cannot try this.
ANY help is appreciated.

With regard to the EPS issue, I think I may have found the source of the problem for SMB users: the Suitcase Fusion plug-in.
Did you make any progress on these issues?

How do I fix a problem with .eps files not showing up properly in icon view

Actually my .eps files are not showing properly in any of the views but icon view is most important to me. I am using OSX.8.5 on a mac mini and mac book air. Almost all of my .eps files are conversions of .wmf files converted to .eps by WMF Converter software. All of these files used to be on a PC running windows Vista using ST Thumbnails explorer to be able to view thumbnails. For background info: I had to use a program to view the WMF files becasue hackers could put viruses into the thumbnail for WMF fies so instead of fixing the problem Microsoft disabled the thumbnail view for all WMF files.
A few of my .eps files are conversions of files created in CorelDraw 3x and converted to .eps in CorelDraw 3x. Both types of .eps files misbehave the same.
I downloaded one .eps file today from the internet to see if it would misbehave the same way (it does).
Here is the problem: After a reboot when I first view a folder that contains .eps files in icon view I can see the file contents fine. If I use the resize slider at the bottom of the window or resize the window itself then some or all of my .eps files revert to displaying the "generic icon" of a Loupe with a picture behind it. If i can manage to put the resize slider to exactly where it was then my icons display the file contents as they did before I messed with the slider. There seems to be no rhyme or reason as to when an icon will display as the file contents or when the generic icon comes up. In some folders all the icons display correctly at the smallest icon size and in other folders the icons may display correctly or as only generic or a mix of generic and file contents. Icons to files that came from the same source will not necessarily display the same way. Icons to files that came from the same source and were converted by WMF Converter at the same minute do not necessarily display the same way. If I display "info" for the files sometimes the previev pane of the info box will display the generic icon or sometimes it will show the file contents. If I take an .eps icon that displays properly and drop it into a folder where all .eps icons are displayed as generic then that icon displays generic. When I move that same icon out of that folder then it will display properly. Icon view, list view, column view and cover flow view all display differently with no discernable pattern. Sometimes I can see file contents in column view and not icon view. Sometimes in cover flow and not in icon view. It makes no difference if I have a handful of .eps files in a folder or hundereds of files in a folder. After an undetermined amount of time the icons might display properly again or maybe not.
What I have done so far: exhaustive search of the internet did not find anyone else with the same issue. I checked and fixed all disk permission errors that disk utilities would fix. I know that icon view and quick look are two different things, but, I did however, download and install an eps quicklook plugin that did not seem to make a difference for my issue. BTW Quick look sometimes works and sometimes not (no discernable pattern to this behavior either). I tried the cnet download fix for quicklook just for grins. It had me force QL to reload plugins and it's cache then I cleared out the QL configuration files. This did not seem to make a difference in the behavior of icon view or Quicklook. The only two things I have found to be consistant are 1) The "open with preview" always works but I know this is different because this preview actually generates a pdf view of the file. 2) When the icon does display the file contents it always displays correctly.
When you read this please be mindful of: I am a Microsoft refugee not yet familiar with the Apple world so you may have to tell me how to do "simple" things. I have no idea what is the difference between a "thumbnail" or a "preview" or the behind the scenes way that apple generates the icon appearance for the 4 different views.
Any assistance would be greatly appreciated. I tried to insert a screen shot but got an error message when I did it.

Was the error number really 0XE8....
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

RMAN-05001 auxiliary .... conflicts with a file used by the target database

I can´t recreate my physical standby.
It worked in the past.
Now I reinstalled the 3 standbyclients.
Copied the spfile from the primary - modified the entries and did a rman backup.
But when issuing the duplicate database command - it comes up with the error above
SPFILE standyby db:
*.db_file_name_convert='+DATA/prim/','+DATA/stdy/','+RECOVERY/prim','+RECOVERY/stdy'
*.log_file_name_convert='+DATA/prim/','+DATA/stdy/','+RECOVERY/prim','+RECOVERY/stdy'
Starting restore at 15-APR-10
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backupset restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /oracle/stage/33lb65n2_1_1
channel ORA_AUX_DISK_1: restored backup piece 1
piece handle=/oracle/stage/33lb65n2_1_1 tag=TAG20100415T102434
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:11
output filename=+REDO1/stdy/controlfile/current.262.716293055
output filename=+REDO2/stdy/controlfile/backup.262.716293055
Finished restore at 15-APR-10
sql statement: alter database mount standby database
released channel: ORA_AUX_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 04/15/2010 10:31:46
RMAN-05501: aborting duplication of target database
RMAN-05001: auxiliary filename DATA/prim/datafile/system.262.715097535 conflicts with a file used by the target database+
RMAN-05001: auxiliary filename DATA/prim/datafile/sysaux.263.715097499 conflicts with a file used by the target database+
RMAN-05001: auxiliary filename DATA/prim/datafile/undotbs3.269.710521021 conflicts with a file used by the target database+
RMAN-05001: auxiliary filename DATA/prim/datafile/undotbs2.270.710521021 conflicts with a file used by the target database+
RMAN-05001: auxiliary filename DATA/prim/datafile/example.272.710521021 conflicts with a file used by the target database+
RMAN-05001: auxiliary filename DATA/prim/datafile/users.268.710521021 conflicts with a file used by the target database+
RMAN-05001: auxiliary filename DATA/prim/datafile/sysaux.273.710521021 conflicts with a file used by the target database+
RMAN-05001: auxiliary filename DATA/prim/datafile/undotbs1.271.710521021 conflicts with a file used by the target database+
RMAN-05001: auxiliary filename DATA/prim/datafile/system.264.710521021 conflicts with a file used by the target database+

Hi ,
I feel you are using ASM but still check the below details:
Cause
Production and Auxiliary have same directory structure and are running on two different machines. RMAN must be told not check that the target datafiles are sharing the same names as the duplicated files being created. Otherwise, the following errors will be returned:
RMAN-05001: auxiliary filename /qmaxnt/u04/qmaxntorafiles/table/QMAXAD08_03.dbf
conflicts with a file used by the target database
RMAN-05001: auxiliary filename /qmaxnt/u04/qmaxntorafiles/table/QMAXAD08_02.dbf
Solution
To implement the solution, please use nofilenamecheck in syntax as follows:
1. Connect to Target, auxiliary, and rman catalog and
2. use script as
run{
set until time "to_date('2005/09/17 14:00:00','yyyy/mm/dd HH24:MI:SS')";
allocate auxiliary channel aux1 type 'sbt_tape';
allocate auxiliary channel aux2 type 'sbt_tape';
duplicate target database for standby dorecover nofilenamecheck;
Make sure to use auxiliary type of channel so RMAN restore take place at auxiliary database.
Thanks,
Rafi.
http://rafioracledba.blogspot.com/

Auxiliary filename conflicts with a file used by the target database

Hi,
I am using RMAN backup to duplicate my prod database.
My database is 10g on Linux.
My RMAN script is like this
connect auxiliary /;
connect catalog rman/rman@catalog;
connect target sys/sys@prod;
sql "alter session set optimizer_mode=RULE";
run {
allocate auxiliary channel dup1 type disk;
allocate auxiliary channel dup2 type disk;
allocate auxiliary channel dup3 type disk;
set newname for datafile 1 to '/d05/u08/oracle/qadata/system01.dbf';
set newname for datafile 2 to '/d05/u08/oracle/qadata/system02.dbf';
set newname for datafile 3 to '/d05/u08/oracle/qadata/system03.dbf';
set newname for tempfile 1 to '/d05/u09/oracle/qadata/temp01.dbf';
set newname for tempfile 2 to '/d05/u09/oracle/qadata/temp02.dbf';
set newname for tempfile 3 to '/d05/u09/oracle/qadata/temp03.dbf';
set newname for tempfile 4 to '/d05/u09/oracle/qadata/temp04.dbf';
duplicate target database to qa logfile
group 1 ('/d05/u09/oracle/qadata/log1a.log',
'/d05/u09/oracle/qadata/log1b.log') size 50m,
group 2 ('/d05/u09/oracle/qadata/log2a.log',
'/d05/u09/oracle/qadata/log2b.log') size 50m,
group 3 ('/d05/u09/oracle/qadata/log3a.log',
'/d05/u09/oracle/qadata/log3b.log') size 50m;
I am getting the following error in the middle
Starting Duplicate Db at 18-SEP-10
released channel: dup1
released channel: dup2
released channel: dup3
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/18/2010 11:32:07
RMAN-05501: aborting duplication of target database
RMAN-05001: auxiliary filename /db01/u08/oracle/proddata/GRCM.dbf conflicts with a file used by the target database
Recovery Manager complete.
Previously the duplicate db was successful, but now it is giving error.
How can I solve this.
Thanks,
Kavitha

5001, 1, "auxiliary file name %s conflicts with a file used by the target database"
// *Cause: RMAN is attempting to use the specified file name as a restore
//         destination in the auxiliary database, but this name is already
//         in use by the target database.
// *Action: Use the CONFIGURE AUXNAME command to specify a name for the data
//          file that does not conflict with a file name in use by the
//          target db.

Issues with our SSL connection to the Web dispatcher

HI Alle,
I having issues with our SSL connection to the Web dispatcher with SAP Web AS. Below is the error in the log files form dev_webdisp:
Started service 80 for protocol HTTP on host "wdpeht1"(on all adapters) (processing timeout=120, keep_alive_timeout=30)
[Thr 368] =================================================
[Thr 368] = SSL Initialization on PC with Windows NT
[Thr 368] =   (701_REL,Jan 28 2010,mt,ascii-uc,SAP_UC/size_t/void* = 16/64/64)
[Thr 368]   profile param "ssl/ssl_lib" = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
           resulting Filename = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
[Thr 368]   profile param "ssl/server_pse" = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
           resulting Filename = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
[Thr 368] =   found SAPCRYPTOLIB 5.5.5C pl29 (Jan 30 2010) MT-safe
[Thr 368] =   current UserID: WDPEHT1\SAPServiceWDP
[Thr 368] =   found SECUDIR environment variable
[Thr 368] =   using SECUDIR=E:\usr\sap\WDP\W00\sec
[Thr 368] * ERROR =>   secudessl_Create_SSL_CTX(): PSE "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" not found! [ssslsecu.c   1354]
[Thr 368] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
secude_error 4129 (0x00001021) = "The PSE does not exist"*
[Thr 368] >> -
Begin of Secude-SSL Errorstack -
>>
[Thr 368] ERROR in SSL_CTX_set_default_pse_by_name: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
ERROR in ssl_set_pse: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
ERROR in af_open: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
ERROR in secsw_open: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
ERROR in secsw_open_pse_or_extension: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
ERROR in sec_get_PSEtype: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
[Thr 368] << -
End of Secude-SSL Errorstack -
[Thr 368] * ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
        for "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" [ssslxxi.c    2278]*
[Thr 368]* ERROR => Initialization of SSL library failed -- NO SSL available!
[Thr 368] =================================================
[Thr 368] <<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_PSE_ERROR*
[Thr 368] *** ERROR => IcmAddService: SapSSLInit (rc=-40): SSSLERR_PSE_ERROR [icxxserv.c   319]
[Thr 2128] IcmCreateWorkerThreads: created worker thread 0
Regards

Hi Olivier,
Thanks for replay,
The PSE does exist in my SEC "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" .
I did tried Again I get this error. I think I missing som parameter
= SSL Initialization on PC with Windows NT
[Thr 2292] =   (701_REL,Jan 28 2010,mt,ascii-uc,SAP_UC/size_t/void* = 16/64/64)
[Thr 2292]   profile param "ssl/ssl_lib" = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
           resulting Filename = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
[Thr 2292]   profile param "ssl/server_pse" = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
           resulting Filename = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
[Thr 2292] =   found SAPCRYPTOLIB 5.5.5C pl29 (Jan 30 2010) MT-safe
[Thr 2292] =   current UserID: WDPEHT1\SAPServiceWDP
[Thr 2292] =   found SECUDIR environment variable
[Thr 2292] =   using SECUDIR=E:\usr\sap\WDP\W00\sec
[Thr 2292] -*ERROR =>   secudessl_Create_SSL_CTX(): PSE "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" not found! [ssslsecu.c   1354]
[Thr 2292] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
secude_error 1281 (0x00000501) = "open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned"*-
[Thr 2292] >> -
Begin of Secude-SSL Errorstack -
>>
[Thr 2292] -*ERROR in SSL_CTX_set_default_pse_by_name: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"*-
-*ERROR in ssl_set_pse: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
ERROR in af_open: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"*-
ERROR in secsw_open: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
ERROR in secsw_open_pse_or_extension: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
ERROR in sec_get_PSEtype: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
ERROR in aux_read_PSEFile: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
ERROR in aux_file2OctetString: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
[Thr 2292] << -
End of Secude-SSL Errorstack -
[Thr 2292] *** ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
        for "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" [ssslxxi.c    2278]
[Thr 2292] *** ERROR => Initialization of SSL library failed -- NO SSL available!
[Thr 2292] =================================================
[Thr 2292] <<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_PSE_ERROR
[Thr 2292] *** ERROR => IcmAddService: SapSSLInit (rc=-40): SSSLERR_PSE_ERROR [icxxserv.c   319]
Her is my profile parameter for https.
h6*#Https parameters for Web dispatcher E:\usr\sap\WDP\W00\sec
#icm/server_port_0 = PROT=HTTPS,PORT=443$$
DIR_INSTANCE = E:\usr\sap\WDP\W00\sec
ssl/ssl_lib = E:\usr\sap\WDP\W00\sec\sapcrypto.dll
ssl/server_pse = E:\usr\sap\WDP\W00\sec\SAPSSL.pse
wdisp/ssl_cred = E:\usr\sap\WDP\W00\sec\SAPSSL.pse
ssf/ssfapi_lib = E:\usr\sap\WDP\W00\sec\sapcrypto.dll
sec/libsapsecu = E:\usr\sap\WDP\W00\sec\sapcrypto.dll
ssf/name = SAPSECULIB
wdisp/ssl_encrypt = 0
icm/server_port_1=PROT=HTTPS, PORT=8400, TIMEOUT=120
###icm/server_port_1=PROT=HTTPS, PORT=44302, TIMEOUT=900 (old)
########icm/server_port_0 = PROT=HTTP,PORT=80, TIMEOUT=120
icm/HTTPS/verify_client=0
wdisp/add_client_protocol_header = true
wdisp/auto_refresh = 120
wdisp/max_servers = 100
wdisp/ssl_auth= 0
ms/https_port = 8400
wdisp/HTTP/use_pool_for_new_conn=1
wdisp/HTTPS/dest_logon_group = HTTPS
#wdisp/server_info_protocol = https
#wdisp/group_info_protocol = https
#wdisp/url_map_protocol = https
wdisp/ssl_ignore_host_mismatch = fals
icm/HTTPS/forward_ccert_as_header = true
icm/HTTPS/trust_client_with_issuer = CN = SAP CA,*
icm/HTTPS/trust_client_with_subject = CN = sapwebdisp,*h6
Regards

HT204022 When i delete photos from photo stream in iphoto .. The pictures are still there on my iphone's photo stream. They are both connected to the same i cloud account.. And i cannot update to ios 5.1 on iphone.. Any help ??

When i delete photos from photo stream in iphoto .. The pictures are still there on my iphone's photo stream. They are both connected to the same i cloud account.. And i cannot update to ios 5.1 on iphone.. Any help ??

1) You asked "Does she need to reconnect to that itunes/computer and if so what do we need to do to remove this folder of pics from her ipod?" Yes, you have to connect the iPod to that computer and go to the Photos pane for the iPod in iTunes and uncheck sync photos and the click on synce/apply. In the future do not check sync photos.
iOS and iPod: Syncing photos using iTunes
2)
Create a NEW account for using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
Then on the iPod go to
- Settings>Messages>Send and receive and sign out your ID and sign into hers. Make sure that only her ID email address is listed.
- Settings>FaceTime sign out of your ID and sign into hers. Make sure that under You can be reached at only her ID email address is listed
- Settings>iCloud and sign out and sign in with hers
Contnue to use the commpn ID/account for Settings>iTunes and App stores.

TS1398 I have an iPad 2 that is updated and using 6.0.1. It is connecting to my wifi just fine. I just purchased a 4th generation iPad. It shows it is connected to the same wifi, same strong signal, but it will not work. HELP!!!

I have an iPad 2 that is updated and using 6.0.1. It is connecting to my wifi just fine. I just purchased a 4th generation iPad. It shows it is connected to the same wifi, same strong signal, but it will not work. HELP!!!

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I am trying to update my itunes to the latest version, but it says the itunes server could not be updated and i need to connect to the internet when I amlready am connected

I am trying to update my itunes to the latest version, but it says the itunes server could not be updated and i need to connect to the internet when I amlready am connected. How do I get the latest version of itunes so i can sync my iphone with itunes without losing all my songs?

We were able to fix our machine! I just could not make sense of the error message, so we were trying non-Microsoft, non-Apple solutions.
Our Solution: Install MalWareBytes, and run a Quick Scan.
Even thought both Microsoft anti-virus and Defender were running on our Windows 8 machine, MalWareBytes found about 100 problems. As I looked over the types of problem and locations, I found several that referenced the exact directory referenced in this message. The machine had to be restarted for MalWareBytes to complete the cleaning, but iTunes installed afterwards with no problems.
Thank you MalWareBytes!

ITunes could not update because you're not connected to the internet. I AM!

Hi,
Whenever I connect my 2gb Nano, I am asked by iTunes if I want to update my ipod software (to V1.3). If I choose to update, I get an arror message saying I can't update because I'm not connected to the Internet. But I am connected, and can access the iTunes store etc. Anyone got any suggestions?
On another subject,Whenever it is connected, the 'Do not disconnect' message appears on the ipod's screen and NEVER goes away. Am I supposed to keep it connected to my computer at all times? Surely not.
Many,many thanks in advance to anyone prepared to help me with this.

This link should resolve the issue.
http://docs.info.apple.com/article.html?artnum=304468

I have the new ipad retina however i connect it to the wifi at work the signal comes and goes, especially as soon as i use an app that requires wifi, my iphone 4s is connected to the same network with no such problems, why is my ipad giving me these probl

I have had my ipad retina for two and a half weeks but since the week end every time i connect to the wifi network it joins then disapears as soon as i open safari for example or just disappears at intermittent intervals....i have my iphone 4s connected to the same wifi network with no such problems.
I have tried resetting the network settings to no avail
Does anyone have any suggestions?
Many thanks in advanced.

I have had my ipad retina for two and a half weeks but since the week end every time i connect to the wifi network it joins then disapears as soon as i open safari for example or just disappears at intermittent intervals....i have my iphone 4s connected to the same wifi network with no such problems.
I have tried resetting the network settings to no avail
Does anyone have any suggestions?
Many thanks in advanced.

I have a IPhone 5 and Iphone 5s. Both are set up with the same account ID and running IOS 8.0.2. When the phones are connected to the same Wifi at home, both phones will ring when someone call in to one of the phone. Anyway to solve this problem?

I have a IPhone 5 and Iphone 5s, each phone is activited with a different service provider. Both are set up with the same account ID and running IOS 8.0.2. When the phones are connected to the same Wifi at home, both phones will ring when someone call in to one of the phone. Hence you do not know exactly which line the caller called. If you answered using the wrong phone, then anyone calling the other number will not get through. Anyway to solve this problem?

Hey David Koh TP,
Thanks for the question. It sounds like your devices are set up to use continuity together. Specifically, it sounds like you are signed into the same Apple ID in FaceTime, and have iPhone Cellular Calls enabled. To resolve your issue, simply disable this setting:
Connect your iPhone, iPad, and iPod touch using Continuity
http://support.apple.com/kb/HT6337
Turn off iPhone cellular calls
To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls.
Thanks,
Matt M.

TS1702 i downloaded the GV app to my iphone but i'm trying to set up the app and it says it can't connect to google when i try to sign in to my google account.... any ideas what's wrong? i can access my gmail account just fine with my gmail app on the sam

i downloaded the GV app to my iphone but i'm trying to set up the app and it says it can't connect to google when i try to sign in to my google account.... any ideas what's wrong? i can access my gmail account just fine with my gmail app on the same phone

What's a GV app?

Update TOC, with .eps files connected in the same TOC

Similar Messages

Maybe you are looking for