Update types - money market

Hi Gurus,
I keep getting an error on the money market side with regard to flow type 1120(final repayment). To which kind of update type should this be assigned i.e. what update type and what usage should I apply to the update type.
Regards

Hi Victor,
Can you elaborate more on your error.  For the flow type 1120, you need to assign it to your custom update type.  Generally it will be like MM1120 + or - for SAP pre defined.  Also assign your flow type to transaction type.
Assign it to transaction Management usage.  Maintain correct Posting specifications and also G/L account.
Regards,
Ravi

Similar Messages

  • Reclassification of Borrowing / Investment in Money Market

    Hi SAP Experrts,
    We are using TRM system and I have the following scenario
    We have borrowing loan 10,000,000/- loan and we paid installment repayment every month 100,000/- and interest. We have this borrowing display long term and posting separate G/L of LTB.
    In balance sheet if repayment less than 1 year this balance showing in short term bowwowing and post in separate G/L and other balance showing in Loan term borrowing. In this case 1,200,000/- display in STB and 8,800,000/- in LTB.
    This is month end activity.
    Next month we paid 100,000/- and 1,200,000/- display in STB and 8,700,000/- in LTB. In last year we showing 1,200,000/- in STB.
    This case  in Investment side also.
    Thanks,
    Vishal Patel

    Hi,
    We enter  Clear Units/Nominals - DBT_U001 and Post Units/Nominals - DBT_U002 in Assign Update Types for Valuation Class Transfer. We run TPM15M for security only system display position but system display following message.
    1 transfers not carried out due to errors
    Message no. TPM_TRTF103
    And we run TPM15M for Money market transaction system transfer total outstanding amount, as per note 1515125 installment repayments wise change valuation class. How to change valuation class installment repayment wise?
    Regards,
    Vishal Patel

  • How to post gain/loss on exchange rate from Money Market

    Dear Sap Expert,
         I need your kindly help about posting gain/loss in Treasury with money market type.
         My scenario use the product type 55A  - Interest rate instrument  and transaciton type = 200 borrowing in Foreign currency transaction as the transaction as belows,
    Date                   Flow Type     Name                       Amouunt      currency     Exchange rate         Amt.Local currency
    19.10.2011         1105             Borrowing               10,000            USD               30.00                       300,000
    30.10.2011         1120             Final repayment       10,000            USD               30.00                      300,000
        For the normally the system generate current exchange rate from the configuration .After that I try to change the Exchange rate manually in Flow type 1120 from 30.00 to be 31.00  then  the Amt.in Local currency changed to be 310,000 and the flow type gain/loss from exchange rate does not generate ( In Loan Management I can do it)
        On 19.10.2011 I use t-code TBB1 to post the borrowing transaction (1105)
        On 30.10.2011 I use T-code TBB1 to post the Payment transaction but the gain/loss account does not happen.
        For my question Can the system post  document for flow tpe 1120 (on 30.10.2011) with exchange rate realized gain/Loss automatically? or how should I do to make it correctly.
    Thank you very much for your suggestion.
    PK

    Hi,
    your customizing for Derived Business Transactions requires DBT_B flows in your PMP in order to post realized gains/losses.
    Regards,
    Lorenz

  • FWTR056 Error assigning update type to flow type 1200, sign -

    Hi
    we have defined a monymarket product type 530 ("Repo")  with Transaction Type 200 (Liablity) and 100 (Asset). This works fine.
    Now, the current market situation requires negative interests for Transaction Type 200:
    Example:
    First Cashflow: +1M
    Final Repayment: -1M
    Interest: +Interest (Sign!)
    So, we get the interest Cashflow at the end.
    I have assigned the Condition 1200 used for TransactionType 100 also to ConditionType 200.
    After using FTR_CREATE for Producttype=530 and TransactionType=200, I can correctly choose between the 2 Conditions 1200 and 1205.
    But: after choosing 1200, the cashflow is shown negativ (althow I have assigned Direction "+" when assigning flowtype to update type 1200)
    Also: when I try to save the deal, I get "FWTR056: Error assigning update type to flow type 1120, sign +, contract type 5"
    Any ideas how to solve this or to define negative interests? It really should be an interest cashflow, not an "other flow".
    Regards, Cornel

    Here the Response from SAP (in german): negative Interests are not possible (or only by using a workaround..)
    04.08.2011 - 16:53:16 CET - Antwort von SAP     
    Sehr geehrte Damen und Herren,
    im Standard ist die Berechnung mit negativen Zinsen aus technischen
    Gründen nicht möglich.
    Leider kann die Funktionalität nicht im Rahmen des Supports erweitert
    werden, somit muss ich Sie mit Hinweis 11 vertrösten.
    Eventuell könnten Sie es mit einem Workaround probieren:
    1. Temporär die entsprechenden Positiv-Beträge für Zinsen
    nutzen, aber die Kontierungen umdrehen (das wäre aber umständlich
    und würde für Zinskapitalisierung nicht gehen),
    2. oder die Geschäft mit einer variablen Zinsenreferenz anlegen und
    dann die Konditionen für die betroffenen Perioden mit einem
    passenden Abschlag (Spread) erzeugen,
    3. oder eben negative Zinsen als Null-Zinsen erzeugen und für diese
    Perioden Bewegungen manuell anlegen (als Zusatzbewegungen).
    Ich kann Ihnen hier leider keine positivere Antwort geben.
    Mit freundlichen Grüßen,
    XY
    FIN Senior Support Consultant
    AGS Primary Support, Business Suite & Technology
    SAP AG

  • Error in  Securities DBT  update types

    Hi experts
    We are using securities module (Transaction manager) to manage our stock (equity) transactions.
    We have defined the update types for (DBT_E001 and DBT_B001) as not relevant to posting as i do not want to post the gain / loss on sale of securities in some companies (say A) using these DBTs.
    However for a few other companies (say B) i have to post the accounting entries. Hence we have made the update type relevant to posting.
    But with this it generates accounting entries for co code A as well as B.
    I have also tried to make "offline" in control of online calculation of DBT. but it only postpones the flow generation. i have to generate and post the flows before i do key date valuation.
    I want to activate DBT flows for co code B but not for A.
    Please suggest
    Regards
    Gaurav Gupta

    Hi Gaurav,
    Your rqmt can not be addressed by making update types relevant for posting, as update types are not cocd specific. You need to use following specifications seperately for each company code:
    a. seperate  Accounting Code for each cocd if the valuation class is same for both cocd, else maintain different valuation class.
    b. Different Position Management procedure for each Company Code based on few Key fields (Accounting code/Val Class)
    c. Assignment of each PMP to respective Acct Code/Valuation Class
    d. Then you copy existing update type DBT_E001 and DBT_B001 and make a copy.
    e. Mark newly created update type not for posting
    f. Assign newly created update type in Dervied Business Transactions of new PMP instead of DBT_E001 and DBT_B001
    By setting above, for both cocd the flows generated by system will be same but with different update type and one set of update type is already marked for posting and other not.
    Otherthan this, another alternative is to maintain dummy GLs in Acct Determination so that no amount will post to actual GLs based on Cocd.
    Hope this will solve your problem.
    Regards
    Prasad AV

  • Where to check UPDATE TYPE in Transformation in BI

    Hi All
    In BI , Where to check UPDATE TYPE( Like whether the filed/infoobject is overwrite or Addition ) in Transformation in BI.
    In BW 3.5 we can check this in UPdate Rule Maintanenance,but in BI where do we check the same.
    Shankar

    Hi,
    you can check Update type in transformation :-
    -->in target, double click on first Column (Rule Type)
    -->Aggregation
    -->you can see both Option (Overwrite, Summation)
    but when target is DSO. in case of Cube, you will have only Summation
    you can check the Update Type in DSO Update Rule as well:-
    -->in Update Rule, Single Click on Key Fig (Amount, Qty....)
    -->Update Rule :Details will come
    -->in that you can see, the Update Type Section has three option (Addition, Overwrite, no update)
    in case of cube you only have ( Addition, no update)
    Best Regards
    Obaid

  • How to change money market maturity date in TR modul

    Dear Friends,
    I want to change the maturity date for money market transaction. Currently the due date is 29.09.2008 but I want to change it to 15.04.2008. When I change it using tcode TS02, an error massage
    "End of term is before end of calculation period of posted flow."
    How can I fix this problem? anyone can help?
    Norliza

    Hi,
    I hope you are required to reverse all posted (fixed flows) flows dated prior to the new term end date.
    thanks,

  • Generate Withholding tax on interest Money Market instrument

    How can I automatically generate a flow for withholding tax on the interest of a money market instrument (55B)? Would the tax be posted on a different (from the counterparty) business partner (tax office) or just an open item on a GL account?

    Hi ,
    As limitation with treasury module, we cant post direct to vendor Therefore you have to use derive flowfor generation of tds flow which can be post as a GL open item but this will not help you to run the With-holding tax cycle.
    If you not required TDS challan, then above mention can help you but if you want to run complete TDS cycle then  firstly you have to post the Gross Interest in Interest Payable and then with the help of FB01 transfer the Gross Interest to Vendor, while passing this entry system will give pop-up of with-holding tax assign in vendor after chossing the right section , system will automatic pass accounting entry of TDS.
    Regards
    Narinder Pal Verma

  • Addition vs. Overwrite for Update Type in Update Rules

    I have an ODS that is updated by transaction data.  A key figure in the ODS is set to "Addition" (not overwrite) in the update rules.  My question is, if a transaction record is changed in ERP - only a characteristic in the record, not the key figure, when I load the ODS using a delta extraction, will the key figure be added again to the existing value in the ODS?  or will the key figure match ERP?
    If update type "addition" does not work with delta extractions, what is it used for?
    Many thanks for your help.

    Hi,
    it depends what the ERP datasource will send as delta for this KF:
    - if it was 10, the document is changed to 12 and your delta sends 2 then this wroks peoperly. Usually the delta will send -10 +12, which is the same.
    - if the delta just resends the "after image", the 12, the your KF should be overwrite since an add would mess it up.
    Your last Q is answered with the first point, right?
    hope this helps...
    Olivier.

  • HT1937 I wanted to know how i can remove my account information off my iphone, because i keep trying to update my apps and it asks me to fix my billing information seeing as my card is now empty at the moment, it acts as if my updates cost money.

    I wanted to know how i can remove my account information off my iphone, because i keep trying to update my apps and it asks me to fix my billing information seeing as my card is now empty at the moment, it acts as if my updates cost money.

    Hi Broken Smoke,
    Welcome to Apple Support Communities.
    You can change the iTunes Store information associated with your Apple ID, and select None as your payment option. See the steps in this article for help:
    iTunes Store: Changing account information
    http://support.apple.com/kb/ht1918
    Changing your account information using an iOS device:
    Tap Settings on the Home screen.
    Tap iTunes & App Stores.
    Tap on your Apple ID. (If you are not signed in, enter your Apple ID and password, and tap Sign In.)
    Tap View Apple ID.
    Enter your Apple ID password.
    To update your name, billing address, or payment information, follow these instructions:
    In the Edit section, tap Payment Information.
    Update the information that you want to change.
    Tap the Done button when finished.
    Have a great day,
    Jeremy

  • Posting log for source flow type/update type

    we have run fix and post derived business transaction in last friday for transaction ID: 3309, this is FX transaction, and it is posted, but in the posting log, it only shows update type ZDB_0012 is posted with 2300 USD, how and where is it derived, it doesn't show, so how can I view the source flow type and derivation steps (instead of going to SPRO derivation or position management procedure, I prefered analyze it in front end transaction)
    now if we go to posting journal list, we also can't find such info. any way to find out, is this update type ZDB_0012 assigned in position management procedure also? which tab?

    Check the BizTalk Administrator Group has the read permissions.
    Refer: Cannot open log for source 'BizTalk
    ESB Toolkit 2.1'. You may not have write access. ---> System.ComponentModel.Win32Exception: Access is denied
    Alternatively, you should also refer the
    below post.
    Production Installation of the Toolkit
    Cannot open log for source ‘BizTalk ESB Toolkit 2.1′
    Rachit
    Please mark as answer or vote as helpful if my reply does

  • Flow with update type SE3003 from 04.09.2014 was only fixed

    Hi Experts,
    I Have a warning message in TBB1 here.
    I want to post to GL!
    Thanks for any help with this.
    Flow with update type SE3003 from 04.09.2014 was only fixed
    Message no. TPM_TRAC1213
    Effects on Customizing
    You can define when this system message is to be issued in accordance with your requirements.
    You do this in Customizing as follows: Cross-Application Components -> Bank Directory -> Change Message Control.
    The application area and message number can be taken from the technical documentation.

    Hi Jyoti Mohta
    My screenshot is in Vietnamese!
    I customized SE3003 as Bond Discount. Here is my TBB1 screenshot.

  • Amortization in money market in Ehp3

    As per IFRS requirment, we would like to do amortisation in money market. We understand that the same is available from Ehp 3. We have activated the relevnat business function. We would like to know what settings and steps needs to be done so that amortisation is done in money market.
    Regards
    S.RADHAKRISHNAN

    Hi Kalyan,
      This create offer is supported for money market only for fixed deposits and for forex spot and forward. This is just to get an overview of all the bids. The direct contract creation from this is just a flexibility, and as pointed out by you, will be taken in entirety.
      But then we always have TM02, to change the fixed term contract, to 5M in your business case. Only then the deal should be settled.
      As pointed out, the validation message comes, of you have to create another partial contract from the same offer screen.
    The idea of clubbing offers simply is to give an overview. I am glad, you have a customer using it.
    Best regards!
    Sandip

  • ODS 2 IC can't change update type

    Hi,
    I need to load data from a ODS to a InfoCube, in the IC i defined a keyfigure with an equivalent data on the ODS (same characteristic). The problem is that when i create the actualization rules for the IC the ratio don't letme change the update type from "No update", how can i resolve it.
    thanks in advance

    Hi,
    when E&M signaling is configured on digital interface like the VWIC is, 2 or 4 wires operation is not applicable because there are no wires at all, and reported only for compatibility with the analog E&M card.
    Consequently, you cannot configure that and it will not make any difference to effect of the connection.
    Please rate post if it helps!

  • Treasury&RiskMgmt-Transaction Manager- Money market

    Hello Colleague,
    In the creation of  Money market - Fixed Term Deposit - investment , one select box for  Capitalize interest is present
    What does this capitalize interest means?? why it is in the Money market?

    Hi, 
    It depends on country you are using.
    if you check capitalize interest, interest would be added to your deposit account i.e. asset account.  Then it means that interest amount has also been added to the asset and hence we will not pay tax on interest amount.  This is generally done, when you invest back the money which you got from deposit including interest.  Then since you are investing, you won't pay tax for it i.e you are using the money.
    If you have not checked the capitalize interest, then you will get the interest amount to your bank or cash and hence it is a revenue, thus you will have to pay tax for interest amount alone depeding on the amount and also the country.
    P.S:  If the question is answered kindly close the question.
    Regards,
    Ravi
    Edited by: Ravishankar Ramamurthy on Jul 8, 2009 5:57 PM

Maybe you are looking for

  • Email and SMS Alerts - Solution Manager - PI and EP

    Hi All, I am trying to do the below scenario.....But somehow i am lost in the process. I have a three system PI landscape and a Solution Manager. I have included the DEV PI in solution manager for CCMS,the CCMS agents are online and it also reflects

  • Verizon FIOS TV/Internet and ESPN

    I guess this really belongs here and not in the "Off Topic" community: I contacted FIOS tech support two times now for issues connecting to ESPN to watch sports online. The first time the issue was due to account activation.  Now my first problem wit

  • PGI Receipt Accounting Document Not Created_ Movement Type 651

    Dear SAP Expert, In my company 1st time we have cretaed a return sales scenario in SAP, I made return sales order with reference to biling document thn made delivery dcument (movement type - 651) goods kept in return storage location automatically du

  • Is the iPad 3 much better than the iPad 2 ?

    Hi, I want to buy an ipad (it will be my firt iPad), and i hesitate between the 2nd and the 3rd gen., some people tell me that there is not big differences between the two except for the retina display and the camera. I did some research and i found

  • How can I set iPad and iPhone with IOS6 to do not remember wifi and proxy credential

    My company want to implement the Password Policy to limit the failure logon count. Such as Lock users if they try logon with invalid password for 3 times. The problem occur on iPad and iPhone   my iPad using IOS6. and user had change their password.