Update Visio Stencils for UCS

Hi
Would it be possible to update the Visio stencils for the Unified Computing System.  There are a number of servers missing as the stencil hasn't been updated since 2012, one in particular is missing and that's the C240M3 LFF chassis.  Also there is no option for disks etc
Many thanks
Mike                  

I too am looking for stencils.  Even the Voice_IP_phone stencil is
missing all the new series phones, such as the 69xx, 89xx and 99xx models.
Anyone know where to even open a request for the new ones, or is everyone not using Visio anymore?

Similar Messages

  • Visio stencil for ASA 5585-X?

    Hello,
    Can anybody help pointing me to where I can get a visio stencil for a asa-5585-x.
    I really appreciate it.
    Thanks,
    John

    Hi John,
    The official Cisco Visio stencils can be found here:
    http://www.cisco.com/en/US/partner/products/hw/prod_cat_visios.html
    I don't see the 5585 there yet, but once it's available that set should be updated.
    -Mike

  • I want to download Visio Stencils for ADF Faces

    Dear members
    I read about Visio Stencils for ADF Faces and I really Like it.
    https://blogs.oracle.com/jdeveloperpm/entry/adf_faces_stencils_for_visio_available_on_samplecode
    And I want to download it. Has any one tried it before.Can any one tell me where can I download it.
    The articular says that it is Available through samplecode.oracle.com but i cannot find it
    please help
    thanks

    http://www.oracle.com/technetwork/indexes/samplecode/jdeveloper-adf-sample-522118.html
    Still down to http://download.oracle.com/otn/samplecode/ADF_Faces_Stencils_for_Visio.zip
    you need to accept the license before download.
    Timo

  • Unable to find visio stencil for 6506-E FourX Adapter

    Hi
    Where can i find the visio stencil for Cisco 6506-E FourX Adapter for 10 Gigabit Ethernet Mode. I found the WS-X6904-40G-2T module but I unable to find the FourX 10G Adapter for it.
    Thanks in advance,
    Martin John

    Hi,
    I was also getting same error, which is solved now.
    For reference following is what we need to check.
    - Proper mapping of source data to endeca dimension is made.
    - You have made entries in "dimension_values.csv" but dimension is not specified in "schema.csv"
    HTH
    MS

  • Visio stencil for ace module

    I've been searching but i can't find the visio stencil for the ACE-10 or ACE-20 module.
    Can anyone point me in the right direction or is this stencil yet to be made ?

    I don't think they are available yet. I needed them a few months ago, couldn't find them, and ended up making my own.
    In case you need it, here's a link to the stencils Cisco provides.
    http://www.cisco.com/en/US/products/prod_visio_icon_list.html

  • Visio Stencils for Cisco Equipment

    Does anyone know where you can obtain some good visio stencils for cisco equipment like routers, switches, gateways, cables, ports, etc.  The default ones in Visio leave much to be desired.  Any input appreciated - thanks.

    I too am looking for stencils.  Even the Voice_IP_phone stencil is
    missing all the new series phones, such as the 69xx, 89xx and 99xx models.
    Anyone know where to even open a request for the new ones, or is everyone not using Visio anymore?

  • Visio Stencil for HWIC-1GE-SFP

                     Does anyone know if there is a visio stencil for the HWIC-1GE-SFP for a 2951 router?  I have looked through the index of stencils, but it is not listed there.  Any suggestions would be appreciated.  Thanks!
    Gil

    Hi Bruno,
    I have just emailed the product group to request funding for the following:
    EHWIC-4ESG
    EHWIC-4ESG-P
    EHWIC-D-8ESG
    EHWIC-D-8ESG-
    EHWIC-4SHDSL-EA
    EHWIC-1GE-SFP-CU
    Those are all of the EHWIC module part numbers that I could find. We are dependent upon the product groups to authorize and fund the Visio work and hopefully I will hear from them soon.
    Regards,
    Brett Newman
    Cisco Visio Production
    Visimation Inc.
    www.shapesource.com

  • Does anyone have current Visio stencils for the newer wireless products?

    Does anyone have the latest Visio stencils for Cisco's wireless products?  Specifically looking for 3502 and 1260 series access points and the 5508 series controllers.
    Thanks in advance!

    Cisco does not seem to have an official stencil for the 5508.  However I found this link and it seems to have 5508 stencils:
    http://www.4shared.com/file/m_dueG18/Cisco-WLC-5508.html

  • Visio stencil for a 3500XL

    I need a visio stencil for the 3500XL series switches.  I've found the ones offered on the cisco site for 3500 series switches but they are only for the 3550 switches.  Can anyone point me in the right direction or happen to have the old 3500XL stencils??

    They are similar ... but not the same.  I've heard there are older stencils for the 3500XL out there but can't seem to track it down.

  • New Visio Stencils for Catalyst 3750, Telepresence 1300

    In response to customer requests, there are new images on the Visio Stencils web page at http://www.cisco.com/en/US/products/hw/prod_cat_visios.html
    The updates include images for:
    ASA 5510 Rear
    ASA 5520 Front
    ASA 5520 Rear
    ASA 5540 Front
    ASA 5540 Rear
    ASA 5580 Front
    ASA 5580 Rear
    ME-C6524GT-8S Front
    ME-C6524GT-8S Rear
    ME-C6524GS-8S Front
    ME-C6524GS-8S Rear
    PWR-400W-AC - 400W AC
    PWR-400W-DC - 400W DC
    Catalyst 3750 Metro Front
    Catalyst 3750 Metro Rear
    PWR-ME3750-AC
    PWR-ME3750-DC
    CTS-1300-47
    CTS-1300-65

    Hi Kevin,
    We updated the 3750 on 2/23/12 and the CRS on 2/20/12.  Please check the download page.
    Regards,
    Brett Newman
    Cisco Visio Development
    Visimation Inc.

  • Updated Visio Stencils

    We have just completed updates to the following Cisco stencils. They are expected to be posted by Cisco's Web team by December 6, 2011:
    Wireless
    ASR 1000 (added the 1013 chassis)
    Nexus 2000
    Connected Grid Router
    We are working on many other product additions to Cisco's Visio stencil library and will do our best to announce them here as they are issued and posted to: http://www.cisco.com/en/US/products/hw/prod_cat_visios.html
    Regards,
    Brett Newman
    Cisco Visio Development
    Visimation Inc.

    Hi Damon,
    There have been many new Visio updates posted on http://www.cisco.com/en/US/products/hw/prod_cat_visios.html in the past 2 years.  We don't usually post announcements on the forums but you can see the latest post dates of the files on the download page.
    There is a 5508 in the Wireless file.
    We can only produce what the product groups request since they fund the Visio work.  I can approach the product groups with specific requests although they may or may not approve it depending on budget.  If you will tell me what you are looking for I will do my best.
    Regards,
    Brett Newman
    Cisco Visio Development
    Visimation Inc.
    www.shapesource.com

  • Cisco Visio Stencils for newer modules

    I have been trying to find stencils for 6500 modules released in the last couple of years, and have had very limited success.  I need stencils for WS-X6748 modules, WS-X6724 modules, WS-X6848 modules, WS-X6816-2T modules and SUP-2T modules, as well as the NAM3.
    If anyone can tell me where these can be found, it will be greatly appreciated.

    Hi,
    Most of what you listed are on the latest Switches-Catalyst 6500 located on the Visio download page:
    http://www.cisco.com/en/US/products/hw/prod_cat_visios.html
    The WS-X6748 and WS-X6724 modules are not in that file.  I will ask the product group if they will approve production of those items.
    Regards,
    Brett Newman
    Cisco Visio Production
    Visimation Inc.
    www.shapesource.com

  • Where are the latest VISIO stencils for logical network device icons

    I want to use the same icons commonly used in the Cisco white paper documentation. Where is the stencil for VISIO?

    Microsoft provided many Visio Stencils at Visio websites, however, if you want to create your own Visio Stencils you can create it in Visio 2010 in the following way
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin-top:0in;
    mso-para-margin-right:0in;
    mso-para-margin-bottom:10.0pt;
    mso-para-margin-left:0in;
    line-height:115%;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:"Times New Roman";
    mso-bidi-theme-font:minor-bidi;}
    1. On the      File menu, point to Shapes, and then click New Stencil.
    2. To save the stencil, right-click the stencil title bar, and then click      Save.
    3. Type a name for your stencil, and then click Save..

  • Need visio stencils for ASA5525, ASA5545 and ASA5555 firewalls

    I've looked at the latest Security-Cisco ASA 55xx stencils on Cisco's website dated Feb 2012 (http://www.cisco.com/en/US/products/hw/prod_cat_visios.html) and they still don't have stencils for the ASA5525, ASA5545 and ASA 5555.  When can those be ready?

    Hello,
    I also had some problems, this was the path taken;
    > http://www.cisco.com/en/US/products/hw/prod_cat_visios.html
    > All Visio Products
    > product_visio_icon0900aecd80095127.zip
    > Security-Cisco ASA 55xx_04.13.11.zip
    These did not include the X series.
    This however does;
    http://www.cisco.com/en/US/prod/assets/visio/products_visio_icon0900aecd8050a7d7.zip
    Cheers,
    James.

  • Looking for Visio stencils for LS1010

    I'm doing a network drawing for a company that is using the LS1010 ATM switches. Does anyone know if I can still get stencils for that product? I checked the web site quickly but didn't see anything. I know these are pretty old so they may not be available. Any input would be greatly appreciated. Thanks!

    That is good enough for me. I'm in the middle of a WAN re-design and I need to draw up an existing environment that is using some 1010's so the chassis is good enough. Could you email them to me at [email protected]? Thanks in advance!

Maybe you are looking for

  • Why my 1st generation nano earbuds not working with 6th generation nano?

    Hi there, I had a 1st generation iPod Nano and Apple just replaced it with a 6th generation nano, however the earbuds jack of my 1st gen does not fit all the way into the 6th gen, it leaves a tiny bit outside and I couldn't push it all the way in, th

  • Export items from certain warehouse in SAP B1

    Hi All. I am trying to export some of the unused items from one of the warehouse in Item Master Data but don't know which tools to use? I try to use Data Import/Export but it is only for transactions export. After that, I'll import the latest item in

  • If PO is created Or approved   reference PR,  should not allow to change th

    Dear All I have one requirement If PO is created Or approved   reference PR,  should not allow to change the quantity or line item. And is it possible to assign this to user specific whether to allow or not . Thanks in advance Mahisap

  • After upgrading to v4 Firefox always start in Safe Mode. How to avoid this?

    When I start Firefox, this Safe Mode windows always shows: [http://imageshack.us/m/593/9760/firefoxsavemode.jpg http://imageshack.us/m/593/9760/firefoxsavemode.jpg] There is no option for Normal mode and I can't use Firefox 4 normally. Any ideas?

  • Dreamweaver and wireless network problem

    This isn't about Airport, but I couldn't find the proper place to post this, so I put it here. Please advise if I'm wrong. I'm running Tiger (10.4.2) on a dual G5. My husband is running Windows XP on a 2GHz Dell, and also a Dell laptop. We just moved