Update was going fine until the error msg... now I have to restore phone completely??

I haven't had issues with other updates. This one's a doozy, and I don't have iCould backup activated. I suppose now I must restore and will lose everything? Not sure why my phone went into Recovery Mode when everything was going so well. Was updating through iTunes on a new iMac (not via wi-fi).

Bummer.
I finally decided that a restore was my only option, so I clicked it. I realized after that I could choose to restore to factory settings or choose what I had synced to iTunes. I sync often, so all of my stuff came back. It worked well, and I hope your problem is gone or soon goes away. I never backed anything up to iCloud and now realize that syncing to iTunes each time I charge is a great idea. I wish you the best.

Similar Messages

I am having the same problem that Paul Birgy is having. It was working fine until the update.

I am having the same problem that Paul Birgy is having.   I can send email from my program but now the reciever cannot read it. Before the update my emails I sent from my program were readable by the reciever.

I send out invoices from Peachtree Premium Accounting 2005. I click on the email icon on top of page and it goes to Microsoft office outlook 2007. It shows as an attachment and in the message it tells the receiver they need adobe reader installed in their computer to read it.   It was all working fine until the last update for adobe reader.
Now they get error message.   Adobe Reader could not open "Invoice #106.PDF" because it is either not a supported file type or because the file has been damaged (for example it was sent as an email attachment and wasn't correctly decoded.)
This started March 3, 2010. Since then I have been faxing out of the Peachtree program. That still works fine.
This problem seemed to start right after one of the updates. I was told to try and reinstall Adobe Reader. I have tried that twice and still have the same problem.
To the best of my knowledge I have not had any problems with Peachtree.
Cathy
Date: Tue, 25 May 2010 14:40:25 -0600
From: [email protected]
To: [email protected]
Subject: I am having the same problem that Paul Birgy is having. It was working fine until the update.
Sounds like either
A. Something in your accounting software is corrupting the file or;
B. Something in your email is corrupting the file (some email providors use compression to make the transfer faster which can mess up a PDF).
What hapens when they try and open it? Do they get an error message? If so, what is it (this matters)?
At any rate, it's doubtful that this is a Reader issue but give us some more detail and maybe someone can help here.
>

My nano 6th gen was working fine until the updates

My nano 6th gen was working fine until the updates now it's on the pc but not iTunes! I've uninstalled and reinstalled iTunes but nothing is working! Please help!

Here is an apple article that might help:
http://support.apple.com/kb/ht1925
i

So I just bought an iPhone 5s and Touch ID was working fine until the software update is that a bug ? Because I don't think my home button broke

So I just bought an iPhone 5s and Touch ID was working fine until the software update is that a bug ? Because I don't think my home button broke

Have not heard of that but here is what I would do - test after each step to see if the problem is solved
1. Restart or reset your iPhone, iPad, or iPod touch - Apple Support
2. If that does not work - back up to iTunes and restore to factory settings
3. Check to see if the problem is resolved before restoring from backup

A friend's eMac was working fine until the name of the administrator was changed incorrectly in Systems Accounts

I am trying to fix a friend’s eMac. It was working fine until the name of the administrator was changed incorrectly in Systems Accounts. Upon restart the computer failed to mount. I tried to reinstall Tiger and could not. The destination to do this install could not be found. While in Disk Utilities I tried to repair and then zero out erase the hard drive, this also could not be successfully done. The hard drive was working perfectly before the name change. I may try to load Tiger from the eMac onto an external drive and then hope to erase the eMac internal drive.
Thank you for your thoughts on this as it would be a shame to retire this trusted computer.
Nick M.

Hello,
Thank you very much for your attention to this. Yesterday I was able to get the eMac to install Leopard onto an external drive. I had hoped that once done I would be able to initialize or erase the content of the internal drive in Disk Utility, but was not able to do so, I only received error messages telling me my request failed. This was also true when I tried to create partitions on it. So in effect, the computer runs, but only from the external drive. I could not even find the internal drive while running from the external drive. Where is it? And the internal drive only occasionally shows up in Disk Utility.
As for holding Option and Alt, the internal drive did not show up.
And Leopard was running on the eMac when I lost contact with it. Again, all failed when a name of the administrator was changed, but was not properly done. Or something like this.
Is there anyway I can use Terminal to help reach the internal drive?
I realize I am asking a lot of questions.
And I thank you for your time,
Nick M.

My apple tv was working fine untill the AirPlay option disappeared. I haven alterd the settings and have tryed rebooting both iPhone and ipad. I even rebooted the ATV and that disn't work. i am connected to the same network on both devices to.. Help

my apple tv was working fine untill the AirPlay option disappeared. I haven alterd the settings and have tryed rebooting both iPhone and ipad. I even rebooted the ATV and that disn't work. i am connected to the same network on both devices to. My iPad is up to date but my phone isn't but as I said mirroring and AirPlay worked fine on both devices befor...

Hi F1N5G10,
Thanks for contributing to the Apple Support Communities.
It sounds like you don't have the AirPlay option on your iOS devices. Restarting your Apple TV and iOS devices was a good first step, and you can find some additional tips to guide your troubleshooting at this link:
Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch - Apple Support
Sincerely,
Jeremy

I bought a Iphone 4S in Colombia two months ago, It never work properly, I cant put turn it on. When I went to Movistar they told me that it was a problem with the software. Now, they have the Iphone for repair.

I bought a Iphone 4S in Colombia two months ago, It never worked properly, I cant put turn it on. When I went to Movistar they told me that it was a problem with the software. Now, they have the Iphone for repair at Movistar. The questios is, If I bought a NEW Iphone why they gave me a Iphone with this problem. I asked about the warranty but they told me that Apple doesn't respond. Please tell me something. The IMEI is: 013071008363505 is a Iphone 4S 16GB. Black.

I would guess the fan is the cause of the noise. Suggest you take a look at it.
This site has a wealth of information about getting inside a Macbook or Macbook Pro.
http://www.powerbookmedic.com/mac-repair.php

HT1414 using Windows 7 OS, I had downloaded the new ioS 6 and started the update on the iPhone 4 and everything was going routine until the phone had been going thought what I though

I attempted to update my iPhone 4 from ioS 5 to ioS 6 from iTunes on my laptop using Windows 7 OS, I had downloaded the new ioS 6 and started the update on the iPhone 4 and everything seemed to be going routine until the phone had been going thought what I though was the update process, when an error window opened up and it said that an error had occured and the iPhone 4 could not be updated. I have never had a problem like this before and it caught me off guard and I did not note all the information in the error window, but it did not appear to indicate anything other than that I would have to abort the update and did not think it would be that big of a problem. I tried to disconnect the phone and was going to do the update at a different time when I could investigate what the problem was. However I could not get iTunes to recognize the iPhone 4 after this and still cannot. After rebooting the laptop a few times and also trying to reset the phone a few times as well, I just have a dead phone. The iPhone 4 just has the image of a USB cable with an arrow pointing to an icon for iTunes. I have tried to get iTunes to recognize the iPhone, but cannot get it to. I am unable to do anything else with the phone. It seems like the phone is in a state where it does not have enough software loaded to do anything or I don’t know how to get it to. Any suggestions how I can get my iPhone 4 back into service. Note: iTunes still recognizes my iPad and iPods, so iTunes seems to be okay to me. Craig

I had this problem on my iPod Touch 4g. Just press the home and sleep button. Wait and it will give an iTunes and cable logo. Now you can put in DFU mode (Hold Sleep and Home button 10 seconds and then release the power button kand keep pressing on the home button.) Now you will be able to restore it in iTunes.
If you didn't sell it in al this time

Apple tv was working fine until power outage. Now stuck on Computers and Settings Icons. Cannot get back to normal function.

Apple TV was installed and functional until power outage. Now I am stuck on Computers and Settings Icons and cannot get back to normal operation. Can get to settings which I have tried many times. Any thoughts?

Happened once to me also following a nasty storm
One of the 2 things worked for me (can't recall which):
1. Power down everything. UNPLUG your apple TV and whatever it's connected to, including the power cord and the HDMI cable (disconnect at both ends) Wait a minute or two.
Reconnect everything: Restart.
2. Totally Reset the Apple TV (this is more work since you'll need to add all your settings)
Whatever worked: My Apple TV resurrected itself (unfortunately can't say the same for my DVD player).
3. Lastly, the timing of the storm could be a cooincidence - this happened to someone else here (no storm invoived) and it turned out to be a temporary outage at Apple. see this: https://discussions.apple.com/message/18027331#18027331
For the future, if you've grown paranoid...
I always unplug my computer for heavy storms (on the advice of a techie at power protection company), But These days, if a storm is really severe (or very extended) I also unplug my AV equipment. the The ATV is chump change compared to the cost of my other components - but I've grown really dependant on it.
Remember: Surge suppressors will take the first hit, but often that's it, their circuitry can then get blown. Also if you do unplug power, Unplug power for everything (very easy by connecting everything to a Surge suppressor) just don't forget RF Cables or ethernet cables (If you leave your router connected).
Personally, I leave my router on, and am willing to rebuy if neccessary, in order to at least access my laptops, and iPad. BUT this means I have to unplug the ethernet cables.
Good luck, doubt your ATV is toasted if anything comes up.

HT204406 Hi! i purchased itunes match a while ago and everything was going fine until i found out that my girlfriend had signed intp her itunes on my mac account. now when i try to turn itunes match on it says This computer is already associated with an A

anyone any ideas?

I'm having the exact same problem and I am the only person who has ever been logged on to this computer to use iTunes Match. Only my wife also uses this computer, and she has never used or signed up for Match.
Interestingly, I have the same number of days listed on my error, 82 days.
Obviously, Apple has screwed up somewhere. I've put a help request in. If we cannot find a solution, we'll have to let everybody know that Match is a ripoff and that all should avoid this fraud like the plague...
Shalom, y'all!
L. Bangs

I purchased an Ipod touch and the instuctions told me to go to Itunes download and everything seemed to be going fine until the message came up that a program that itunes needs to run is being used. I have never had I tunes on this computer.

I purchased an Ipod touch and when I tried to download 10.5, it stop loading and gave an error message, A program it needs to run is being used by another program. What will fix this problem. I am running Vista and this is my first time trying to download ITunes. The only Apple device that has been connected is my wife's I Phone 3G.

See:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
If you have Snow Leopard do not forget the Additional Information paragraph.

HT5636 my right shift key was modified to open the Desktop. Now I want to restore it back to normal. How do I unsaying that key?

Last year I wanted to have a quick way to accessory Desktop. I modified the right Shift key to do this. Now I want to reverse that back to normal. I can't seem to find out how to do that (as I forgot how I did it in the first place).

System Preferences -> Keyboard -> Shortcuts.
In Windows look at Ease of Access.

Editing a pdf form that I created. Adding header error msg "do not have sufficient permissions to perform this task"

Editing a pdf form that I created. Adding header, currently the header only appears on page 1 of a 3 page pdf form. I want it to appear on each page. I am receiving the error msg "do not have sufficient permissions to perform this task"

In Adobe Acrobat use a Action for this.

Dashboard Designer Error - You do not have sufficient permissions to complete the request.

Hi all
I have created a PerformancePoint Data Source library and a PerformancePoint Reports list on a SharePoint site. The PerformancePoint site collection and site features are also both activated. The data source library is in
the 'trusted data soruces' list in administration. Existing reports I have created show OK on the site.
When user, who has full control of the entire site, clicks "add a new item" in the BI Reports list, SharePoint launches Dashboard Designer OK.
The problem is when Dashboard Designer loads, it does not load the existing data sources & reports. Clicking on the refresh icon results in the error:
You do not have sufficient permissions to complete the request.
If I add this user to the Site Collection Administrators list, the user can refresh and view the data sources & reports OK. Is this a requirement to create reports in Dashboard Designer? It is not acceptable to set all
our report designer users as the site collection administrator.
Cheers
Tyson

Hi,
Have you also tried to assign rights using the technique mentioned in the above given document (i.e. using Dashboard Designer):
Important To assign or change user permissions for dashboard items, you must have
Full Control permissions. Although you can create and publish dashboard items with
Design permissions, you cannot assign or change permissions for dashboard items unless you also have
Full Control (Site) or Site Collection Administrator permissions.
Use the SharePoint Permissions dialog box to assign or change user permissions for a dashboard item. You can open the
SharePoint Permissions dialog box from Dashboard Designer or from the SharePoint list or document library that contains the dashboard item. The following sections describe both methods.
Edit user permissions in Dashboard Designer
In the Workspace Browser, click PerformancePoint Content or
Data Connections, depending on the item that you want to modify. Then, in the center pane, double-click the dashboard item to open it for editing.
In the ribbon, click the Home tab, locate the Item group, and then click
Permissions. A browser window opens, which enables you to view or change the SharePoint permissions for the dashboard item that you opened.
Use the SharePoint permissions dialog box to modify the user permissions for your dashboard item, and then save your changes.
Edit user permissions in a SharePoint list or document library
Locate the dashboard item that you want to modify in its SharePoint list or document library.
Select the check box that is next to the name of the dashboard item. At first glance, you might not see a check box next to your dashboard item. The check box is visible when you put your cursor next to the
Title column, which is located next to the name of the dashboard item. The ribbon appears in the SharePoint site.
In the SharePoint ribbon, click List Tools, and then click
Items. Locate the Manage section, and then click
Document Permissions. A SharePoint Permissions dialog box opens. This enables you to view and change the user permissions for the item that you selected.
Use the SharePoint Permissions dialog box to modify user permissions for your dashboard item, and then save your changes.
Please tell us if this approach shows different permissions assigned and solves your problem.
Thanks and best regards,
Martin
Martin W. Angler, MCTS
Blog angler.wordpress.com
Twitter: Follow me on twitter

IPhone 4S was working fine until recenty after updating the software to the 5.1 version

My iPhone 4s was working fine until I recently updated the software to version 5.1, now it locks up on nearly any screen and reverts back to the main screen. Even in settings, if I go in a few tabs in settings all of a sudden it takes me back to the main screen. I have done a total reset on the phone and it has not helped.
Also, it is now completely frying the battery goes from 100% to 35% in about 4 hours. I have killed all apps running and it is still hot and using up the battery.

I have done all of the above suggested restart, reset and restores using iTunes and without. No luck.
What I have found is that under Settings; General; About; Diagnostics & Usage; there is an error message populating every single minute that says low memory. It appears that the reset back to the main screen coincides with this error message. I have very little data stored on the phone, 13 Gig available.
How does one go about emptying this memory?

Update was going fine until the error msg... now I have to restore phone completely??

Similar Messages

Maybe you are looking for