Update was Terminated when creating a Sales Order
Hiii...
When the sales order was created for the first time in the QAS System, it thrown a update error saying "Update was terminated user XXXXX". I checked the error message in SM13 and found that the error was in
RV_MESSAGE_UPDATE.
When i check the dump of this, there was a dump saying
" The length of COMMON PART "VEDACOM" in program "RVADOR01" is incorrect."
"Error analysis"
The structure of the COMMON PART "VEDACOM" in program "RVADOR01" is
different from the corresponding area in the calling program
"/SMB40/RVADOR01".
Length of the COMMON PART in program RVADOR01: 6600 bytes.
Length of the COMMON PART in program /SMB40/RVADOR01: 2840 bytes.
There is probably an error in the program
"RSNAST00".
This is for V1 Document type for ZA01 Output type.
Error occured at
896 * restore original NAST record (in case TNAPR-RONAM changed something)
NAST = TEMP_NAST.
The same thing is working fine in DEV. But problem in QAS. This is the first document generated in QAS.
Kindly help.
Best Regards,
Srikanth.
SAP Note 1614849 addresses this.
Cause
There are two common reasons for the dump: a) Z-program or b) Incorrect
Program
Resolution
Replace the Z-programs with the standard output
Check the following customizing: SPRO > SD > Basic Functions >
Output Control > Output determination using the condition technique >
Maintain Output Determination for sales documents > Maintain output types.
Select Output type ‘BA00’, double click on “Processing Routines” and change for
medium 1 the program from ‘/SMB40/RVADOR01’ to for example‘RVADOR01’
Similar Messages
-
Update was terminated when creating document through FBR2
Hi,
I am getting the error "Update was terminated " when I try to change the GLcode and post the document through transaction FBR2. The ABAP dump error shows ASSERTION_FAILED in the program LGLIOA20 , form OBJECTNR_FIND_GLPCC. Moreover it's a V1 update.
I am not sure what data is missing during the posting. Can you suggest what would be the cause for termination occurred?
thanks
RengaWelcome to SCN.
Have you looked for notes on this problem?
Rob -
Error in GTS when creating a sales order
Hello All:
Let me first say that I have researched the forums and web for my answer to no avail...there is not a lot of information out there for GTS issues.
When creating a sales order in ECC 600; I am receiving errors...I have looked at SLG1 in order to get more information on these errors. I have validated my config in GQ0 and it appears to be correct. Here is my errors I am receiving:
Legal Control: Item Type Mapping not Maintained
Item Category: ZTAE
Item Category: ZTAQ
Legal Control: Partn. Function Mapping not Maintained
Partner Function: AG
Partner Function: AP
Partner Function: CI
Partner Function: EN
Partner Function: RE
Partner Function: RG
Partner Function: SP
Partner Function: WE
Legal Control: Mapping of Org. Units not Maintained For Fore
Company Code: 1000
Legal Control: Mapping of Org. Units not Maintained For Lega
Plant: 1000
I have looked under the Org Structure for these errors and think my configuration is correct. I have checked under the following:
In SPRO I have done the following Config under Org Structure:
Define Foreign Trade Organizations
Assign Company Code At Feeder System
Define Legal Units
Assign Legal Unit to Foreigne Trade
Assigned Plant at Feeder System
In Spro I have done the following Config under Partner Structure:
Define Partner Functions
Define Groups of Partner Functions
Assign Partner Functions at Feeder system
In SpRO under Compliance Management I have done the following Config under document structure:
Define Doc Types
Assign Doc types at feeder system
Define item categories
Assign item categories at feeder system
It is obvious I am missing something....Please help...it would be greatly appreciated....Hi Dave
Thanks for replying.
For Business Partners the error I am getting in SLG1 is the follwoing:
Sub Object text
Mapping of API to Customs Shipment - Arrival
Program
/SAPSLL/SAPLCORE_APPLOG_SERV
@5C\QError@
The system was unable to determine an FT organiz. for company code 1000
The system was unable to determine a legal unit for plant 1000
No mapping information exists for partner function AG
Another error for Business Partner:
sub object text
Business Partner Distribution
Program
/SAPSLL/SAPLCORE_APPLOG_SERV
@5C\QError@
Please use another function to maintain the SPACE version of the address
For Item Categories
SubObect TextMapping of API to Customs Shipment - Arrival
Program
/SAPSLL/SAPLCORE_APPLOG_SERV
@5C\QError@
No mapping information exists for item type ZTAQ
The system was unable to determine a legal unit for plant 1000
No mapping information exists for partner function AG
Also we are using GTS 7.2 but upgrading to GTS 10 and I am trying to create our testing client for a to test after upgrade
Edited by: Kim Blair on Sep 9, 2011 4:57 PM
Edited by: Kim Blair on Sep 9, 2011 4:58 PM -
Automatic creation of intercompany PO when creating a Sales Order
Hi Experts
Is there a standard way of triggering an intercompany PO when creating a sales order to the final customer (or the other way around, triggering a sales order to the end customer upon creation of an intercompany PO)? Scenario: business has setup a logistics company (company code X), which its purpose is to deliver goods to the final customer (home customers). However, sales orders are created from seperate chain of stores which belong to another company code (company code Y). This chain of stores have one sales organisation (since there is over 1000 stores under a chain). I need a way to represent that a sale originated from a store/plant belonging to company Y to end customer A. Also, I need a billing document (intercompany) from company code X to store/plant beloning to company Y.
Issues: in the intercompany config (assign intern customer numbers to sales org) - is there a way to assign a customer number at site/plant level so that when creating an intercompany billing it can be picked instead of the one assigned to the sales org and where can this be specified in the sales order (remember: in my scenario there are multiple stores/plants that belong to one sales organisation and it is not possible to use one customer number linked to the sales organisation.)
Desired results:
Sales order from store/plant YY belonging to company code Y to end customer A
Intercompany billing from plant XX belonging to company code X to store/plant YY
End customer billing from store/plant YY to end customer A
Thank you in advance for your help.Hello Tsmash
I think you can acheive this with Regular Sales order + Inter Company STO combination.
Maintain customer numbers for each of the Plants from Company Y for the sales area belonging to Company X.
Then do the config for STO in MM using this menu path:
SPRO/Materials Management/Purchasing/Purchase Order/Set up Stock Transport Order
Here, in the activity 'Define Shipping Data for Plants', enter each of the plant-customers and the Sales area belonging to Comany code Y. Carry out other activities in this area appropriately.
Similarly set up Custom ( say Z1) Special Procurement type for Plant YY for stock transfer from XX using this menu path:
SPRO/Production/Material Requirements Planning/Master Data/Define Special Procurement Type:
Here maintain procurement type as F, Special procurement as U and plant as XX. You may need to repeat this config for each of the receiving plants (over 1000 stores under a chain) from co code Y.
In the material master MRP 2 for Plant YY, maintain procurement type as F and Special Procurement as Z1.
Sales order will be received under Co Code Y and sales area belonging to Y form customer A,
Because of the MRP config, a PO (STO) requirement will be raised on Co code X and plant XX. XX will send the goods to YY via a STO delivery using the Shipping data from 'Set up STO' config,
Plant YY will send the goods to A and bill that customer. Co Code X will raise an inter-comany bill on Co code Y.
That's how it should work. Try it and revert with any issues. -
Sale Order Item Quantity Not Populating When Create A Sale Order Using BAPI
I am having a problem when creating a sale order using BAPI
BAPI_SALESORDER_CREATEFROMDAT2
Problem is that sale order item quantity field is not populating
code is as follows
ORDER_ITEMS_IN-ITM_NUMBER = '0010'.
ORDER_ITEMS_IN-MATERIAL = '000000000010000262'.
ORDER_ITEMS_IN-TARGET_QU = 'LB'.
ORDER_ITEMS_IN-TARGET_QTY = 1.Hi,
Try populating ORDER_SCHEDULES_IN table in the bapi field REQ_QTY.
Regds,
Rudra -
Hello,
our customer plans to use a Non-SAP solution for variant configuration (Camos) in SAP ERP (ECC 6.0) and in SAP CRM 7.0 EHP1 as well.
ERP sales orders (and ERP quotations) should be created in SAP CRM (CRM WebUI).
Is it possible to use variant configuration (with an external variant configuration tool) when creating ERP sales orders and quotations in the SAP CRM WebUI or do we have to implement SAP IPC for this?
Thanks in advance.
Regards,
AEVDear AEV,
I think LORD (lean orders) should work with variant configuration as well. In the note 1236015 there is not restriction listed. However you need lord2 activated in ECC, and ECC system should be on EHP4.
Best regards
Rene -
Price is not being updated when creating a sales order using DTW oOrders
Hello experts,
When I create a sales Order using DTW (oOrders), the information in the input files document.csv and document_lines.csv is updated with no problem, except the price. The price is being ignored from the input files.
Is there something that I must considered when trying to update the price of a sales order using the DTW?
The field "price" was mapped in the source and target fields in DTW.
Here is the document_lines.csv
RecordKey,LineNum,AccountCode,Address,ItemCode,LineTotal,Price,Quantity,ShipDate,WarehouseCode,TaxCode
RecordKey,LineNum,AccountCode,Address,ItemCode,LineTotal,Price,Quantity,ShipDate,WarehouseCode,TaxCode
1,1,_SYS00000000059, ,30PA08-0360-25,1,11.2,3,20110702,V08,A5
1,2,_SYS00000000059, ,30PA08-0707-25,1,15.2,3,20110702,V08,A5
1,3,_SYS00000000059, ,30PA08-0707-22,1,18.3,3,20110702,V08,A5
And the document.csv:
RecordKey,DocEntry,CardCode,DocDate,DocDueDate,DocTotal
RecordKey,DocEntry,CardCode,DocDate,DocDueDate,DocTotal
1, ,c-6167,20110702,20110702,2
Thank you for your help
Jorge ManzoHi,
Try to re-create your dtw using my template,and use text tab when saving your template.
SO-Header
RecordKey CardCode CardName Comments DocDate DocDueDate DocNum
RecordKey CardCode CardName Comments DocDate DocDueDate DocNum
1 24-25 MANUFACTU 24-25 MANUFACTURING 4/5/2010 4/15/2010 11142
SO-LINE
RecordKey linenum itemcode qty uom PriceAfterVAT Price SalesPersonCode
RecordKey linenum itemcode qty uom PriceAfterVAT Price SalesPersonCode
1 0 SHAFT HEX 7/8" 1 pc 4536 4050 CRIS
Note : Line -(LINE NUM and QTY is important upon computation of Price if SO is ITEM TYPE Document.
hope this will help you!
Regards,
Darius -
Update gets terminated when we convert planned order to purchase requisitio
Hi All,
I am facing a problem when I am converting a planned order generated after MRP run into a purchase requisition.
My MRP settings are .
Strategy is 10
Procurement type F.
When I convert my planned order into Purchase requisition with MD14 the system gives me a Purchase requisition number , but as soon as I press enter after that I get a message:
"Express Document: Update was terminated , received from author my name".
Now when I check the PR number the PR number generated above does not exist in the system. Please tell me where can i check the same.Hi
Check the PR number range, whether the PR number range is created or not
Go to OMDT t.code and check the PR accounted assignment for your plant.
If the planned order created through PIR the account assignment must be U
If the Planned order created from through the sales order the account assignment must be E or C.
try this
Thanks
S.Murali -
Update was terminated when we do commit work twice in short time
Hi Experts,
i have one Data bas update problem. My requirement is to create contracts in CRM with new item category(suppose ZSFT) than what is determined(ZSRT). i am using CRM_ORDER_MAINTAIN FM to create contracts after that i am calling CRM_ORDER_SAVE to save transaction then COMMIT WORK key word to commit in data base. Since transaction is created with Determined item category(ZSRT) i am calling change transaction bapi BAPI_BUSPROCESSND_CHANGEMULTI to change item category after that BAPI_BUSPROCESSND_SAVE to save transaction and BAPI_TRANSACTION_COMMIT to commit the work. but second commit is not happening instead error message "Update was terminated" recieved from author "XXXX". when i created test program with BAPIs to change already created contracts to change item category it is working fine.
Any body has any clue.
Thanks in advance
SivaHello Siva, Is your problem solved ? I have the same error and unable to update the partner info on Service confirmation.
Here is what I'm trying to acheive.. I'm working on an interface that creates a docflow and creates service confirmation against existing service order. In the confimation file when I have new ZAPP((partner function ZAPP) I need to delete ZAPP that gets copied over from service order into the confirmation in docflow. Right now, in my first CRM_ORDER_MAINTAIN call I have one entry for new ZAPP and I have It_docflow populated. This creates two ZAPPs on the confirmation. I need to delete ZAPP on the confirmation that is copied over from service order.
Right now I'm reading the confirmation and trying to delete the ZAPP but after my second crm_order_maintain,order save and commit call sequence I'm getting this error update was terminated.
Experts any help on how to get around this issue would be highly appreciated.
Thanks -
Error on ATP check when Creating a Sales Order
Hello,
I encounter error on ATP check while creating a Sales Order.
The error is when I create Sales Order using material A, with or with out indicating the Plant and Storage Location, the Purchase Order quantity is returned on ATP check, but when I create an SO with out indicating the Plant and Storage Location, no PO quantity was returned. Note that we applied SAP Note # 387482 to automatically determine the Storage Location. I have also checked material maintenance in MM03 of Materials A and Material B and nothing was different, they have the same Availabity check condition.
Is it possible that the SAP note that I applied causes the error?
By the way I have noticed that when I create Material B and manually populate the Plant and Storage Location there is a pricing error(but it returns the PO during ATP check).
Thanks.
NoreenHello,
I encounter error on ATP check while creating a Sales Order.
The error is when I create Sales Order using material A, with or with out indicating the Plant and Storage Location, the Purchase Order quantity is returned on ATP check, but when I create an SO with out indicating the Plant and Storage Location, no PO quantity was returned. Note that we applied SAP Note # 387482 to automatically determine the Storage Location. I have also checked material maintenance in MM03 of Materials A and Material B and nothing was different, they have the same Availabity check condition.
Is it possible that the SAP note that I applied causes the error?
By the way I have noticed that when I create Material B and manually populate the Plant and Storage Location there is a pricing error(but it returns the PO during ATP check).
Thanks.
Noreen -
'update was terminated' while creating billing document VF01
Hi all,
i need a solution urgently ..except for paticular document no all documents that i post using VF01 create successfully document no.
but for a paticular document no(may be it is of some type that i am unable to) while creaing billing document no it gives a message 'document created successfully' ,but when i try to click any button after that e.g BACK it shows a messge 'Update was terminated for author ....' in my inbox. and vf03 shows the documentdoesn't exist.
in st22 i checked one dump . when i gave a break point at that point the cursor never reached the code.
I also checked SM13 and it showed all fms as init. and one fm 'RV_MESSAGE_UPDATE ' as error . i aws unable find the fm in the main program .
one more thing when i create bill document for other document type it shows messge 'Document saved ....(no accounting document created)' but for this one i am getting messge 'document saved.......' .
I asked one collegue he told me might be some OSS notes required for it . i am working on a unicoded system ECC 6.0 version.but he is not sure .
Has any body faced the same problem..and what was the soln....if oss notes are required than how could i find it..and what was the no...........
THANKS IN ADVANCE ...................THANKS for the reply.
i am new to sap .can u tell me in detail where actually i can check for number range of the document . one more when i checked the sm13 and started debugging it gave me for a certain character set (may be in chineses) present in the table ,the transfer command gives a dump. now the problem is it is too long 132 and don't no forwhich character it gives an dump.how can i check the characters maintained in the system. it gives a dump CX_SY_CONVERSION_CODEPAGE ,At the conversion of a text from codepage '4102' to codepage '4110':
i am not sure this causes the mesages 'Updation was terminated' . what u people think.
thanks .. -
Error V2 005 when creating a sales order from a quotation
I hope someone can come up with some ideas to help me with this error. My client is creating a sales order from a quotation and immediately on the first screen the error V2 005 pops up. The quotation was not created with reference to any previous document, and at this point not sold-to party has even been copied through to the sales order.
To make this error more interesting, this is only happening with 1 particular customer.
I have checked: credit management, customer hierarchies, material determination, customer info records and none of these are in use.
Can someone please come up with some ideas?
Thanks and regards
KikasDear Sai,
Thanks for this note I am going to try it, however I have some concerns because the issue is only happening in production, with 1 custoemr only, and QA is an updated copy of production and I could not replicate the error in QA using the same customer....
If anyone has any other ideas please I would appreciate it
thanks
Kikas -
Problem in when creating the sales order
Hi to All,
I am using the function module 'BAPI_SALESORDER_CREATEFROMDAT2' to create a sales order with quotation reference. When
I executing the program the return table shows following issues
1.Document 20000292 doesn't have document category but
2.Sales document was not changed
But , when i used to create the sales order manually( TC : VA01) with reference of '0020000292' it gives the sales order number.
so,kindly suggest me.
Thank youHi,
While using BAPI, you need to give some mandatory fields . So I think document catogary is missing in header structure.
Thanks,
Srikanth.A -
Getting "Express Document Update was terminated" while creating BP..
HI All
I am creating Business Partner using HR Pernr using following BAPI's.
1. BUPA_CREATE_FROM_DATA - To create BP.
2. BUPA_ADDRESS_ADD - To create address..
3. BUPA_ROLE_ADD_2 - To create role.
4. BUPR_RELATIONSHIP_CREATE - To create relationship.
5. BUPA_BANKDETAIL_ADD - To create acounts.
6. BUPA_STATUS_ADD - To create status.
BP is creating fine...along with I am getting the Error like "Express Document update was terminated received from author ......" . Error descriptin looks like below.
Error Info... CD 328: DUPREC:POS&BUPA_ADR&DP00243572.
I have verified in SM13 T code...It is showing in BUPA_ADR_WRITE_DOCUMENT.
Please suggest me how we can resolve this issue...
Thanks in advance..
RamaHi Rama Krishna,
This can also happen when your number ranges are incorrectly defined.
Try checking number range assignment for BP and check in table if number already exist.
We faced similar problem when migrated data from prod server and someone change the number ranges for PO.
Regards,
Mohaiyuddin -
Warning message, if Quantity=0, when creating a sales order with VA01orVA02
Hi Experts,
Currently, if the user do not enters any value in QUANTITY field, while creating a sales order(or even VA02 too) ..........we are getting a Warning message(VU001).
So, I need to change it to hard error message type, am changing the message type, but, its not reflecting, and still its throwing a warning message(VU001)!!
Let me know that, What is the correct user exit to incorporate my changes?
From where this message generating? am keeping a watch point with this message (VU001), but, its not stopping!!
System is ECC 6.0
repliaes appreciated
thanq
Edited by: SAP ABAPer on Dec 22, 2008 4:38 PMthanq
(the reason, why my original code was worked is that, I put my code in SAVE user exit!!)
yes, its working, but, the scaenrio is different, so, its like,
if the user entered my_matnr with quantity = 0,
then presses ENTER,
now, we are getting a WARNING MESSAGE of message class & # is VU001, saying the Item 000010 is quantity 0...........so, here I need to change it to HARD ERROR message.
So, as soon as press the ENTER button(after enetring 0 qty matnr)........I need to get HARD error message, so, where should I incorporate the changes? is it MOVE FIELD TO VBAP user exit?
thanq
Maybe you are looking for
-
good night recently my iphone 4s was exchanged for a new one because was defective and was in warranty. the problem is that now I try to use the same apple id on itunes and applications while had bought the old iphone does not appear and I think shou
-
How can I sort photos by file name on my IPAD?
I have sorted all my photos by filename (on a windows PC). After downloading the photos to my IPAD they are sorted by shooting date. This is for sure not what I wanted. Does anybody know how I can solve this (sort my photos on filename!)? Thanks.
-
Hi I've created AW using OLAP DML and populated the AW using SQL Fetch and SQL Import. Then I created an aggmap to aggregate (Parent-Child Concat Dimension) using SUM operator it worked very fine. When I added to the AGGMAP a MODEL to roll-up differe
-
Hii All, kindly suggest me some links regarding IDOCs, as I need to create one regarding PO. Points for sure......:) Regards, Ashish
-
How to apply modified UI Defaults to existing forms and reports?
Hi all-- I've been struggling with UI defaults and after searching through posts in this forum, it doesn't look like I'm alone. Is there a way to apply changes made to UI defaults to existing forms and reports? New forms and reports pick up the chang